Compressed Air, Wooden Clappers, and Other Non-Traditional Methods for Dispersing European Starlings from an Urban Roost

During autumn 2003, several thousand European starlings (Sturnus vulgaris) began roosting on exposed I-beams in a newly constructed, decorative glass canopy that covered the passenger pick-up area at the terminal building for Cleveland Hopkins International Airport, Ohio. The use of lethal control or conventional dispersal techniques, such as pyrotechnics and fire hoses, were not feasible in the airport terminal area. The design and aesthetics of the structure precluded the use of netting and other exclusion materials. In January 2004, an attempt was made to disperse the birds using recorded predator and distress calls broadcast from speakers installed in the structure. This technique failed to disperse the birds. In February 2004, we developed a technique using compressed air to physically and audibly harass the birds. We used a trailer-mounted commercial air compressor producing 185 cubic feet per minute of air at 100 pounds per square inch pressure and a 20-foot long, 1-inch diameter PVC pipe attached to the outlet hose. One person slowly (< 5 mph) drove a pick-up truck through the airport terminal at dusk while the second person sat on a bench in the truck bed and directed the compressed air from the pipe into the canopy to harass starlings attempting to enter the roost site. After 5 consecutive nights of compressed-air harassment, virtually no starlings attempted to roost in the canopy. Once familiar with the physical effects of the compressed air, the birds dispersed at the sound of the air. Only occasional harassment at dusk was needed through the remainder of the winter to keep the canopy free of starlings. Similar harassment with the compressor was conducted successfully in autumn 2004 with the addition of a modified leaf blower, wooden clappers, and laser. In conclusion, we found compressed air to be a safe, unobtrusive, and effective method for dispersing starlings from an urban roost site. This technique would likely be applicable for other urban-roosting species such as crows, house sparrows, and blackbirds.

Histological structure of the facial skin in the bald uakari (Cacajao calvus), compared to other non-red Neotropical primates

In social species, such as primates, facial appearances transmit a variety of social signals. Although it is suggested that the intense red colour of the face of the bald uakari monkey might be an indicator of health, this hypothesis still has not been verified. This study describes the histological structure of the skin of the face in the bald uakari, compared with other non-red neotropical primates, to better understand the maintenance of its colour. The facial skin of the bald uakari monkey is characterized by a thinner epidermis, absence of melanin pigments and a high density of vascular capillaries that spread below the epidermis. These vascular capillaries are larger and more tortuous than in other neotropical primates. The skin of the face of the bald uakari monkey allows a direct external assessment of haematological status, suggesting that the colour of the face would be an honest indicator of health, but could also signal sexual or behavioural states.

Los espacios mineros abandonados. El caso de la Comunidad de Madrid

La Comunidad de Madrid ha tenido un pasado minero importante que ha dejado su vestigio en el territorio. Actualmente la explotación de minerales no metálicos y de rocas industriales y ornamentales continúa, pero no así la de la minería metálica que en el pasado fue abundante. Hoy en día todas estas minas están abandonadas, dando lugar a zonas degradadas con un elevado riesgo para la seguridad de las personas y de los animales terrestres que habitan por sus inmediaciones, y necesitan ser intervenidas atendiendo, además, a su integración o recuperación ecológica y paisajística en el territorio. El principal propósito de esta tesis es conocer la situación actual que presentan las minas abandonadas de metales y proponer unos modelos de actuación para la rehabilitación e integración de los espacios mineros abandonados de la Comunidad de Madrid, cuya ventaja también estriba en su posible extrapolación a otras aéreas de gestión con una problemática similar. Partiendo de una selección de cincuenta y siete minas de interior metálicas abandonadas, se ha hecho un diagnostico en función de su seguridad (riesgo), interés cultural, arqueológico e histórico y por su afección a espacios protegidos, resultando que en todas, excepto en tres de ellas, es preciso llevar a cabo medidas protectoras y de restauración e integración en el medio ambiente. El conjunto de minas catalogadas de alto riesgo para la seguridad son veintitrés, y sobre ellas se ha realizado un Análisis Clúster, en el que además de los criterios de gestión formulados: seguridad, protección del patrimonio minero-industrial e integración ecológico-paisajística, se han incorporado otros modificadores como distancia a poblaciones, caminos, pistas y vías pecuarias, y accesibilidad. Con los resultados de este análisis se obtienen una clasificación por grupos de las minas en relación con las características intrínsecas de las explotaciones preseleccionadas y la tipología de problemas que presentan, y a partir de ella se plantean soluciones viables que se concretan en la redacción de una serie de anteproyectos tipo. Una de las principales aportaciones es que se trata de un modelo de inventariocaracterización- actuación extrapolable a otros entornos similares con problemáticas parecidas. Las propuestas de actuación que figuran en los anteproyectos tipo se proponen como medidas aplicables en situaciones similares. La tesis además también incorpora una base de datos georreferenciada que permite la localización de las explotaciones mineras abandonadas, el acceso rápido a sus características y a la propuesta de restauración correspondiente. ABSTRACT The Community of Madrid had an important mining past that left its traces in the territory. Currently the explotation of non-metallic minerals and industrial and ornamental rocks continues, but not so much with the metal deposits that were abundant in the past. Today these mines are abandoned, resulting in degraded areas with a high risk to the safety of nearby people and animals that inhabit its vicinity, and they need to be intervened, by tending to their environment integration or ecological and landscape recovery. The main objective of this thesis is to know the current situation of abandoned metal mines and propose an action model for the rehabilitation and integration of abandoned mining areas of the Community of Madrid, whose advantage also is its possible extrapolation to other management areas with similar problems. From a selection of fifty-seven abandoned metal mines, a diagnosis has been made, based on safety (risk), cultural, archaeological and historical interests and how it can be related to protected areas, resulting that all but three of them need measures of protection, restoration and integration to the environment. The set of mines that are classified as a high security risk are twenty-three, and it has been made on them an Cluster Analysis, as in addition to the management formulated criteria, such as safety, protection of mining and industrial heritage and eco-landscape integration, it has been incorporated other modifying variables, such as distance to populations, roads, tracks and livestock paths, and accessibility. With the results of this analysis, a classification of similar groups of mines in relation with the intrinsic characteristics of the preselected mines and typology problems, and from it a set of viable solutions will be specified, being then drafted on a series of proposals. One of the main contributions of this research is that it consists of an inventorycharacterization- action model, which can be extrapolated to other similar environments with similar problems. The action measures that are contained in the proposals are defined as applicable to similar situations. The thesis also incorporates a geo-referenced database that allows finding the location of abandoned mines, thus giving quick access to its features and its corresponding restoration proposal.

Compliance supplement for audits of institutions of higher learning and other non-profit institutions.

Shipping list no.: 91-743-P.

Outline of lectures on the non-metallic elements and their compounds.

Mode of access: Internet.

Non-metallic cold-cathode electron emission from composite metal-insulator microstructures

A detailed investigation has been undertaken into a field-induced electron emission (FIEE) mechanism that occurs at microscopically localised `sites' on uncoated, dielectric-coated and composite-coated metallic cathodes. An optical imaging technique has been used to observe and characterize the spatial and temporal behaviour of the populations of emission sites on these cathodes under various experimental conditions, e.g. pulsed-fields, gas environment etc. This study has shown that, for applied fields of 20MVm^-1, thin dielectric (750AA) and composite metal-insulator (MI) overlayers result in a dramatic increase in the total number of emission sites (typically 30cm^-2), and hence emission current. The emission process has been further investigated by a complementary electron spectroscopy technique which has revealed that the localised emission sites on these cathodes display field-dependent spectral shifts and half-widths, i.e. indicative of a `non-metallic' emission mechanism. Details are also given of a comprehensive investigation into the effects of the residual gas environment on the FIEE process from uncoated Cu-cathodes. This latter study has revealed that the well-known Gas Conditioning process can be performed with a wide range of gas species (e.g. O_2, N_2 etc), and furthermore, the degree of conditioning is influenced by both a `Voltage' and `Temperature' effect. These experimental findings have been shown to be particularly important to the technology of high-voltage vacuum-insulation and cold-cathode electron sources. The FIEE mechanism has been interpreted in terms of a hot-electron process that is associated with `electroformed' conducting channels in MI, MIM and MIMI surface microstructures.

The influence of non-metallic inclusions upon the properties of linepipe steels

The principal aim of this work was to determine the role of non-metallic inclusions in the process of hydrogen stepwise cracking (SWC). Additionally, the influence of inclusions upon the notch ductility of hydrogen charged (HC) and uncharged (UN) tensile specimens was examined. To obtain a basis for experiment a series of low carbon-manganese steels were prepared by induction melting. In order to produce variations in the composition, morphology, volume fraction, size and distribution of the inclusions the steel chemistry was adjusted prior to casting by additions of deoxidiser and Ca-Si injection. Sections of each ingot were hot rolled. Metallography, image analysis, mechanical tests and hydrogen SWC tests were then carried out. The volume fraction, morphology, and shape of inclusions influenced the tensile ductility of the steels. Marked anisotropy was found in the steels containing type II MnS inclusions at all rolling temperatures, whereas the fully Ca treated steel was isotropic. It was found that several inclusion parameters (projected length PL, mean free distance MFD, nearest-neighbour distance NND) correlated with fracture strain. An increase in inclusion volume fraction and/or the dimension of inclusions on a plane parallel to the plane of fracture led to a decrease in fracture strain. The inclusion parameters did not correlate with the fracture strains for the HC tensile specimens. However, large or clusters of inclusions acted as the principal sites for crack initiation. `Fisheyes' or areas of `flat' fracture were often found on these fracture surfaces. The criteria for SWC initiation was found to be either large inclusions or clusters of inclusions. As the PL of inclusions increased the probability of large SWCs occurring increased. SWC initiation at inclusions was believed to occur at a critical concentration of hydrogen. Factors which assisted the concentration of hydrogen at inclusions were discussed. None of the proposed mechanisms of hydrogen embrittlement could be identified as the single cause of SWC.

Fatigue in metallic alloys containing non-metallic particles

This paper examines the effects of non-metallic particles on fatigue performance and, in particular, their influence on fatigue crack propagation at high ΔK (Kmax) levels. The nature and properties of a number of common non-metallic particles found in Fe- and Al- based alloys are described, and consideration is given to the consequences of mismatch of physical and chemical properties between particle and matrix. Effects of particles on fatigue in conventional alloys are illustrated and compared with the behaviour of Al/SiCp MMC. The problems associated with developing particulate reinforced MMC with adequate fatigue crack growth resistance and toughness for structural applications are discussed. © 1991.

Aspirin and other non-steroidal anti-inflammatory drug prescriptions and survival after the diagnosis of head and neck and oesophageal cancer

Peer reviewed

Controlled carbon nanotube synthesis from germanium nanoparticles

Controlled syntheses of carbon nanotubes (CNTs) are highly desirable for nanoelectronic applications. To date, metallic catalyst particles have usually been deemed unavoidable for the nucleation and growth of any kind of CNTs. However, the presence of metal species mixed with the CNTs represents a shortcoming for most electronic applications, as metal particles are incompatible with silicon semiconductor technology. Recently it has been shown that it is possible to create nanotubes without the presence of metallic catalysts, by using SIO2, Ge and other non-metallic nanoparticles. Here we report on a metal-catalyst-free synthesis of CNTs, obtained through Ge nano-particles assembled on silicon surfaces previously patterned by Focused Ion Beam and nanoindentation.

Which industry is greener? An empirical study of nine industries in OECD countries

This study analyzed the relationship between the CO2 emissions of different industries and economic growth in OECD countries from 1970 to 2005. We tested an environmental Kuznets curve (EKC) hypothesis and found that total CO2 emissions from nine industries show an N-shaped trend instead of an inverted U or monotonic increasing trend with increasing income. The EKC hypothesis for sector-level CO2 emissions was supported in the (1) paper, pulp, and printing industry; (2) wood and wood products industry; and (3) construction industry. We also found that emissions from coal and oil increase with economic growth in the steel and construction industries. In addition, the non-metallic minerals, machinery, and transport equipment industries tend to have increased emissions from oil and electricity with economic growth. Finally, the EKC turning point and the relationship between GDP per capita and sectoral CO2 emissions differ among industries according to the fuel type used. Therefore, environmental policies for CO2 reduction must consider these differences in industrial characteristics. © 2013 Elsevier Ltd.

O Cariri cearense: da ocupação do território à institucionalização da região metropolitana do Cariri

Urbanization in their mearing simpler, the agglomeration of people, occurred from the time that the productive activities have to be based on trade. The first cities arose when the evolution of agriculture allowed the production and storage of surpluses. However, with industrialization was that urbanization becomes intense, according to Singer (1987), the industrial revolution was to stage, from the beginning, the urban area. It requires, in its proximity, the presence of a large number of workers. With respect to the Cariri cearense, the occupation of its territory is associated with the movement of agricultural surpluses produced and reproduced under the hegemony of merchant capital and due to the development of extensive cattle that promoted the territorial occupation of Ceará. From the 1960s, the region has undergone changes in its productive structure due to industrial planning policies of the government of Ceará. However it was in the 1990s that the region itself as economic and urban polo because policies to attract investments from the state government of Ceará. This policy led to boosting trade and services marking the predominance of tertiary activities in the region, especially the retail, wholesale , medical services and education. Investments also consolidated the industrial park area making it diverse, especially the footwear industries, mining, non-metallic minerals, transport equipment, pharmaceutical chemical, food and beverages, rubber and leather and construction. Thus, the aim of this study was to review the region of Cariri cearense occupation of its territory institutionalizing its metropolitan region, to understand what factors influenced the Cariri cearense become an important area in urban and economic terms in the interior of Ceará. In order to develop this research in that refers to the methodological perspective, research is guided by bibliographic studies and also makes use of secondary data analysis (population, GDP, urbanization rate, employment) of the main databases the country, as IBGE, IPEADATA and RAIS - MTE

Estudo dos efeitos da criação de morfologias antropogênicas em área de mineração

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)