Approaches to environmental noise policy in Australia

Australia is a federation of six states and two territories. Legislation for environmental noise is the responsibility of each of the Australian states and territories. The Federal government has the responsibility for national issues such as aircraft noise and also to encourage harmonisation of the legislation and regulations among the states and territories. For some decades there has been a document on environmental noise produced by Standards Australia but it is up to each state or territory to call up part or all of this Standard. For general environmental noise some states use comparison with background as the criteria while others define the criteria levels based on land use zones. Both approaches have their advantages and drawbacks. This paper will compare and contrast the different legislation and regulations and discuss the issue of 'cross border' disputes.

Incident investigation training needs for the Australasian rail industry

A core component for the prevention of re-occurring incidents within the rail industry is rail safety investigations. Within the current Australasian rail industry, the nature of incident investigations varies considerably between organisations. As it stands, most of the investigations are conducted by the various State Rail Operators and Regulators, with the more major investigations in Australia being conducted or overseen by the Australian Transport Safety Bureau (ATSB). Because of the varying nature of these investigations, the current training methods for rail incident investigators also vary widely. While there are several commonly accepted training courses available to investigators in Australasia, none appear to offer the breadth of development needed for a comprehensive pathway. Furthermore, it appears that no single training course covers the entire breadth of competencies required by the industry. These courses range in duration between a few days to several years, and some were run in-house while others are run by external consultants or registered training organisations. Through consultations with rail operators and regulators in Australasia, this paper will identify capabilities required for rail incident investigation and explore the current training options available for rail incident investigators.

A safety adapted car following model for traffic safety studies

Traffic safety studies demand more than what current micro-simulation models can provide as they presume that all drivers exhibit safe behaviors. All the microscopic traffic simulation models include a car following model. This paper highlights the limitations of the Gipps car following model ability to emulate driver behavior for safety study purposes. A safety adapted car following model based on the Gipps car following model is proposed to simulate unsafe vehicle movements, with safety indicators below critical thresholds. The modifications are based on the observations of driver behavior in real data and also psychophysical notions. NGSIM vehicle trajectory data is used to evaluate the new model and short following headways and Time To Collision are employed to assess critical safety events within traffic flow. Risky events are extracted from available NGSIM data to evaluate the modified model against them. The results from simulation tests illustrate that the proposed model can predict the safety metrics better than the generic Gipps model. The outcome of this paper can potentially facilitate assessing and predicting traffic safety using microscopic simulation.

Report of the Committee of the Legislature appointed to examine into the condition, affairs, revenue, and future prospects of the New-Jersey Rail Road and Transportation Company.

Original has call no. : ARCHIVES/O/J900/M2/no. 89

Address of the directors of the Camden and Amboy Rail Road and Delaware and Raritan Canal companies to the people of New Jersey.

Original has call no. : ARCHIVES/O/J900/M2/no. 54

Investigating the interactions of road users and pedestrians in a dynamic rail level crossing environment

There are 23,500 level crossings in Australia. In these types of environments it is important to understand what human factor issues are present and how road users and pedestrians engage with crossings. A series of on-site observations were performed over a 2-day period at a 3-track active crossing. This was followed by 52 interviews with local business owners and members of the public. Data were captured using a manual-coding scheme for recording and categorising violations. Over 700 separate road user and pedestrian violations were recorded, with representations in multiple categories. Time stamping revealed that the crossing was active for 59% of the time in some morning periods. Further, trains could take up to 4-min to arrive following its first activation. Many pedestrians jaywalked under side rails and around active boom gates. In numerous cases pedestrians put themselves at risk in order to beat or catch the approaching train, ignored signs to stop walking when the lights were flashing. Analysis of interview data identified themes associated with congestion, safety, and violations. This work offers insight into context specific issues associated with active level crossing protection.

Present status of harvesting, transportation and marketing of freshwater Small Indigenous Species of Fish (SIS) of Bangladesh

A survey conducted to evaluate the present status of harvesting, transportation and marketing of freshwater SIS of Bangladesh showed that among the 56 to 73 species of small indigenous fish species (SIS), mola (Amblypharyngodon mola), dhela (Osteobrama cotio cotio), puti (Barbodes sarana), tit puti (Puntius ticto), tengra (Mystus vitatus), chapila ( Gudusia chapra), batashi (Pseudotropius atherinoides), buzuri tengra (Mystus tengra), katchki (Corika soborna), gol chanda (Chanda ranga), lamba chanda (Chanda nama), phul chela (Chela phulo) and lata (Channa punctatus) are the most common. But the abundance of the mola, puti, tengra, batashi and chapila are higher than the other SIS species. Puti was at the top of the list in percentage abundance (7-9%), followed by mola (7-8%), tengra 6-7% and chapila 5-6% in all the investigated areas. Three levels of market or marketing systems were observed in the distribution channel of fish trade: primary, secondary/higher secondary and final consuming markets. Primary market is the catching point in the rural area. In secondary market, the collectors bring the fish from primary market to the landing ghats, usually to the nearest thana market or at a place well linked by rivers, road and rail transport. On purchasing the fish from the higher secondary market, the paikars sell the fish to the retailers who take it to the final consumer market. Different types of crafts and gears are used for catching the SIS in Bangladesh. Monofilament gill nets (20%), traps and line nets (25%) and seine nets (25%) are the dominant gears in respect of the total catch followed by lift net (10%) and cast net (20%). A total of 10 types of gear are listed according to their mode of operation which used for catching SIS. The processors in consumer market received higher marketing profit followed by primary market and secondary market, respectively.

PROSPECTS AND ISSUES FOR FUEL CELLS WITH FREIGHT RAIL TRANSPORTATION

Recent changes in the cost and availability of natural gas (NG) as compared to diesel have sparked interest at all levels of the commercial shipping sector. In particular, Class 1 heavy-duty rail has been researching NG as a supplement to diesel combustion. This study investigates the relative economic and emissions advantage of making use of the energy efficiencies if combustion is circumvented altogether by use of fuel cell (FC) technologies applied to NG. FC technology for the transport sector has primarily been developed for the private automobile. However, FC use in the automobile sector faces considerable economic and logistical barriers such as cost, range, durability, and refueling infrastructure. The heavy-duty freight sector may be a more reasonable setting to introduce FC technology to the transportation market. The industry has shown interest in adopting NG as a potential fuel by already investing in NG infrastructure and locomotives. The two most promising FC technologies are proton exchange membrane fuel cells (PEMFCs) and solid oxide fuel cells (SOFCs). SOFCs are more efficient and capable of accepting any kind of fuel, which makes them particularly attractive. The rail industry can benefit from the adoption of FC technology through reduced costs and emissions, as well as limiting dependence on diesel, which accounts for a large portion of operation expenses for Class 1 railroads. This report provides an economic feasibility analysis comparing the use of PEMFCs and SOFCs in heavy freight rail transport applications. The scope is to provide insight into which technologies could be pursued by the industry and to prioritize technologies that need further development. Initial results do not show economic potential for NG and fuel cells in locomotion, but some minimal potential for reduced emissions is seen. Various technology configurations and market scenarios analyzed could provide savings if the price of LNG is decreased and the price of diesel increases. The most beneficial areas of needed research include technology development for the variable output of SOFCs, and hot start-up optimization.

On Transport Service Selection in Intermodal Rail/Road Distribution Networks

Intermodal rail/road freight transport constitutes an alternative to long-haul road transport for the distribution of large volumes of goods. The paper introduces the intermodal transportation problem for the tactical planning of mode and service selection. In rail mode, shippers either book train capacity on a per-unit basis or charter block trains completely. Road mode is used for short-distance haulage to intermodal terminals and for direct shipments to customers. We analyze the competition of road and intermodal transportation with regard to freight consolidation and service cost on a model basis. The approach is applied to a distribution system of an industrial company serving customers in eastern Europe. The case study investigates the impact of transport cost and consolidation on the optimal modal split.