Effect Of Spray Drying On The Sensory And Physical Properties Of Hydrolysed Casein Using Gum Arabic As The Carrier.

This study was aimed at spray drying hydrolysed casein using gum Arabic as the carrier agent, in order to decrease the bitter taste. Three formulations with differing proportions of hydrolysed casein: gum Arabic (10:90, 20:80 and 30:70) were prepared and characterized. They were evaluated for their moisture content, water activity, hygroscopicity, dispersibility in water and in oil, particle size and distribution, particle morphology, thermal behaviour (DSC) and bitter taste by a trained sensory panel using a paired-comparison test (free samples vs. spray dried samples). The proportion of hydrolysed casein did not affect the morphology of the microspheres. The spray drying process increased product stability and modified the dissolution time, but had no effect on the ability of the material to dissolve in either water or oil. The sensory tests showed that the spray drying process using gum Arabic as the carrier was efficient in attenuating or masking the bitter taste of the hydrolysed casein.

In situ gelling hexagonal phases for sustained release of an anti-addiction drug

In this study, fluid precursor formulations for subcutaneous injection and in situ formation of hexagonal phase gels upon water absorption were developed as a strategy to sustain the release of naltrexone, a drug used for treatment of drug addiction. Precursor formulations were obtained by combining BRIJ 97 with propylene glycol (PG, 5-70%, w/w). To study the phase behavior of these formulations, water was added at 10-90% (w/w), and the resulting systems were characterized by polarized light microscopy. Two precursor formulations containing BRIJ:PG at 95:5 (w/w, referred to as BRIJ-95) and at 80:20 (w/w, referred to as BRIJ-80) were chosen. Naltrexone was dissolved at 1% or suspended at 5% (w/w). Precursor formulations were transformed into hexagonal phases when water content exceeded 20%. Water uptake followed second-order kinetics, and after 2-4 h all precursor formulations were transformed into hexagonal phases. Drug release was prolonged by the precursor formulations (compared to a drug solution in PBS), and followed pseudo-first order kinetics regardless of naltrexone concentration. The release from BRIJ-80 was significantly higher than that from BRIJ-95 after 48 h. The relative safety of the precursor formulations was assessed in cultured fibroblasts. Even though BRIJ-95 was more cytotoxic than BRIJ-80, both precursor formulations were significantly less cytotoxic than sodium lauryl sulfate (considered moderate-to-severe irritant) at the same concentration (up to 50 mu g/mL). These results suggest the potential of BRIJ-based precursor formulations for sustained naltrexone release. (C) 2011 Elsevier By. All rights reserved.

Endoscopic features in a model of multivisceral xenotransplantation

Introduction: Xenotransplantation and multivisceral transplantation are advanced therapeutic methods that still require a scientific basis. There are no experimental models of multivisceral transplantation available, particularly not the monitoring by endoscopy. Here, we describe the endoscopic features in a model of multivisceral xenotransplantation. Methods: The distal esophagus, stomach, intestine, colon, liver, pancreas, and the kidneys with a common vascular pedicle were harvested from rabbits and implanted in swine (group I, n = 9) or in rabbits (group II, n = 4). Endoscopy was performed in the stomach, jejunum, and ascending colon at four consecutive time points (immediate after surgery and 10, 90, and 180 min after reperfusion). Lesions were macroscopically graded as mild, moderate, and severe. Biopsies were taken following sacrifice at 180 min after reperfusion. Results: In group I, the stomach, jejunum, and colon manifested a progression of lesions with predominance of mild lesions after 10 min, mild to moderate lesions after 90 min, and moderate to severe lesions after 180 min. In animals from group II, endoscopy showed normal features at all time points after reperfusion. Histopathologic analysis confirmed the diagnosis of hyperacute rejection in group I. Grafts from group II animals presented normal or mild ischemic/reperfusion injury. Conclusion: All animals subjected to multivisceral xenotransplantation showed a progression of endoscopic lesions with time after transplantation, while animals subjected to allotransplantation showed no aberrations in endoscopy. We conclude that endoscopy is a useful tool in the assessment of hyperacute rejection of a xenograft.

Mating aggregations and mating success in the flower thrips, Frankliniella schultzei (Thysanoptera: Thripidae), and a possible role for pheromones

Aggregations of Frankliniella schultzei males were observed on the corollas of Hibiscus rosasinensis and Gossypium hirsutum flowers in southeast Queensland. Aggregations were seen only on the upper surfaces of corollas but may have occurred on other flower parts, which were hidden from view. Conspecific females entered aggregations and a small proportion of them mated [18% (n = 163), H. rosasinensis; 30% (n = 181), G. hirsutum]. Most females (87 and 72%, respectively) that did not mate in aggregations walked to other flower parts. Behavior was difficult to observe on these parts, but mating was sometimes observed there. The number of females that landed within aggregations on the upper surfaces of both H. rosasinensis and G. hirsutum corollas was highly correlated with the number of males (r = 0.88, r = 0.93, respectively; P < 0.001). Significantly more mating pairs were observed in high-density aggregations (mean +/- SE, 1.10 +/- 0.22 and 4.44 +/- 0.48, respectively) than in low-density aggregations (0.37 +/- 0.11 and 1.67 +/- 0.29, respectively) (P < 0.05) on flowers of both species. More F. schultzei females were attracted to sticky traps baited with live conspecific males set among flowering Ipomoea indica (mean +/- SE, 8.83 +/- 0.32) and G. hirsutum (10.90 +/- 0.79) plants than to control traps (0.10 +/- 0.05 and 0.70 +/- 0.25, respectively)( P < 0.05), presumably in response to male-produced pheromones. Significantly more females were attracted to traps with high male densities than to traps with low densities. We found no statistical evidence that aggregation size influenced mating success (proportion males that mated). Mating success, however, should be evaluated with respect to mating on all flower parts and not just the upper surfaces of corollas. The results of this study constitute the first behavioral evidence for an attractant sex pheromone in thrips.

The structural and functional diversity of naturally occurring antimicrobial peptides

Antimicrobial peptides occur in a diverse range of organisms from microorganisms to insects, plants and animals. Although they all have the common function of inhibiting or killing invading microorganisms they achieve this function using an extremely diverse range of structural motifs. Their sizes range from approximately 10-90 amino acids. Most carry an overall positive charge, reflecting a preferred mode of electrostatic interaction with negatively charged microbial membranes. This article describes the structural diversity of a representative set of antimicrobial peptides divided into five structural classes: those with agr-helical structure, those with bgr-sheet structure, those with mixed helical / bgr- sheet structure, those with irregular structure, and those incorporating a macrocyclic structure. There is a significant diversity in both the size and charge of molecules within each of these classes and between the classes. The common feature of their three-dimensional structures is, however, that they have a degree of amphipathic character in which there is separate localisation of hydrophobic regions and positively charged regions. An emerging trend amongst antimicrobial proteins is the discovery of more macrocyclic analogues. Cyclisation appears to impart an additional degree of stability on these molecules and minimizes proteolytic cleavage. In conclusion, there appear to be a number of promising opportunities for the development of novel clinically useful antimicrobial peptides based on knowledge of the structures of naturally occurring antimicrobial molecules.

Dimensionamento de um secador em leito fluidizado para secagem de cereais

O objectivo desta tese é dimensionar um secador em leito fluidizado para secagem de cereais, nomeadamente, secagem de sementes de trigo. Inicialmente determinaram-se as condições de hidrodinâmica (velocidade de fluidização, TDH, condições mínimas de “slugging”, expansão do leito, dimensionamento do distribuidor e queda de pressão). Com as condições de hidrodinâmica definidas, foi possível estimar as dimensões físicas do secador. Neste ponto, foram realizados estudos relativamente à cinética da secagem e à própria secagem. Foi também estudado o transporte pneumático das sementes. Deste modo, determinaram-se as velocidades necessárias ao transporte pneumático e respectivas quedas de pressão. Por fim, foi realizada uma análise custos para que se soubesse o custo deste sistema de secagem. O estudo da secagem foi feito para uma temperatura de operação de 50ºC, tendo a ressalva que no limite se poderia trabalhar com 60ºC. A velocidade de operação é de 2,43 m/s, a altura do leito fixo é de 0,4 m, a qual sofre uma expansão durante a fluidização, assumindo o valor de 0,79 m. O valor do TDH obtido foi de 1,97 m, que somado à expansão do leito permite obter uma altura total da coluna de 2,76 m. A altura do leito fixo permite retirar o valor do diâmetro que é de 0,52 m. Verifica-se que a altura do leito expandido é inferior à altura mínima de “slugging” (1,20 m), no entanto, a velocidade de operação é superior à velocidade mínima de “slugging” (1,13 m/s). Como só uma das condições mínimas é cumprida, existe a possibilidade da ocorrência de “slugging”. Finalmente, foi necessário dimensionar o distribuidor, que com o diâmetro de orifício de 3 mm, valor inferior ao da partícula (3,48 mm), permite a distruibuição do fluido de secagem na coluna através dos seus 3061 orifícios. O inicio do estudo da secagem centrou-se na determinação do tempo de secagem. Além das duas temperaturas atrás referidas, foram igualmente consideradas duas humidades iniciais para os cereais (21,33% e 18,91%). Temperaturas superiores traduzem-se em tempos de secagem inferiores, paralelamente, teores de humidade inicial inferiores indicam tempos menores. Para a temperatura de 50ºC, os tempos de secagem assumiram os valores de 2,8 horas para a 21,33% de humidade e 2,7 horas para 18,91% de humidade. Foram também tidas em conta três alturas do ano para a captação do ar de secagem, Verão e Inverno representando os extremos, e a Meia- Estação. Para estes três casos, foi possível verificar que a humidade específica do ar não apresenta alterações significativas entre a entrada no secador e a corrente de saída do mesmo equipamento, do mesmo modo que a temperatura de saída pouco difere da de entrada. Este desvio de cerca de 1% para as humidades e para as temperaturas é explicado pela ausência de humidade externa nas sementes e na pouca quantidade de humidade interna. Desta forma, estes desvios de 1% permitem a utilização de uma razão de reciclagem na ordem dos 100% sem que o comportamento da secagem se altere significativamente. O uso de 100% de reciclagem permite uma poupança energética de cerca de 98% no Inverno e na Meia-Estação e de cerca de 93% no Verão. Caso não fosse realizada reciclagem, seria necessário fornecer à corrente de ar cerca de 18,81 kW para elevar a sua temperatura de 20ºC para 50ºC (Meia-Estação), cerca de 24,67 kW para elevar a sua temperatura de 10ºC para 50ºC (Inverno) e na ordem dos 8,90 kW para elevar a sua temperatura dos 35ºC para 50ºC (Verão). No caso do transporte pneumático, existem duas linhas, uma horizontal e uma vertical, logo foi necessário estimar o valor da velocidade das partículas para estes dois casos. Na linha vertical, a velocidade da partícula é cerca de 25,03 m/s e cerca de 35,95 m/s na linha horizontal. O menor valor para a linha vertical prende-se com o facto de nesta zona ter que se vencer a força gravítica. Em ambos os circuitos a velocidade do fluido é cerca de 47,17 m/s. No interior da coluna, a velocidade do fluido tem o valor de 10,90 m/s e a velocidade das partículas é de 1,04 m/s. A queda de pressão total no sistema é cerca de 2408 Pa. A análise de custos ao sistema de secagem indicou que este sistema irá acarretar um custo total (fabrico mais transporte) de cerca de 153035€. Este sistema necessita de electricidade para funcionar, e esta irá acarretar um custo anual de cerca de 7951,4€. Embora este sistema de secagem apresente a possibilidade de se realizar uma razão de reciclagem na ordem dos 100% e também seja possível adaptar o mesmo para diferentes tipos de cereais, e até outros tipos de materiais, desde que possam ser fluidizados, o seu custo impede que a realização deste investimento não seja atractiva, especialmente tendo em consideração que se trata de uma instalação à escala piloto com uma capacidade de 45 kgs.

Exporting "failure": why research from rich countries may not benefit the developing world

The '10/90 gap' was first highlighted by the Global Forum for Health Research. It refers to the finding that 90% of worldwide medical research expenditure is targeted at problems affecting only 10% of the world's population. Applying research results from the rich world to the problems of the poor may be a tempting, potentially easy and convenient solution for this gap. This paper had the objective of presenting arguments that such an approach runs the risk of exporting failure. Health interventions that are shown to be effective in the specific context of a Western industrialized setting will not necessarily work in the developing world.

Envolvimento da função renal em pacientes com leishmaniose visceral (calazar)

Envolvimento da função renal em pacientes com leishmaniose visceral (calazar). Apresenta-se estudo prospectivo de 11 pacientes com LV, com o intuito de verificar as repercussões clínico-laboratoriais da função renal na doença. Realizou-se análises laboratoriais das amostras de sangue e urina, colhidas logo após confirmação diagnóstica, através do encontro de leishmanias no aspirado de médula óssea. Dois (18%) pacientes apresentaram complicações associadas a LV. Cinco (45,4%) apresentaram hematúria macroscópica e em um caso (No.9) manifestações clínicas compatíveis com síndrome nefrítica aguda. Os resultados dos exames de urina mostraram: proteinúria em 10 (90,9%) pacientes, hematúria 7 (63,6%) e leucocitúria em 6 (54,5%) casos. Nove (81,8%) pacientes apresentaram níveis elevados de microalbuminúria caracterizando lesão glomerular. A presença de tubulopatia proximal medida através da proteína ligadora de retinol, foi observada em 5 (45,4%) casos. Concluiu-se que o envolvimento renal se fez presente na maioria dos pacientes, contribuindo para a gravidade da doença.

Development of Janus hydrogel microcapsules as novel biomaterials-stem cells construct for 3D co-culture applications

Co-cultures of two or more cell types and biodegradable biomaterials of natural origin have been successfully combined to recreate tissue microenvironments. Segregated co-cultures are preferred over conventional mixed ones in order to better control the degree of homotypic and heterotypic interactions. Hydrogel-based systems in particular, have gained much attention to mimic tissue-specific microenvironments and they can be microengineered by innovative bottom-up approaches such as microfluidics. In this study, we developed bi-compartmentalized (Janus) hydrogel microcapsules of methacrylated hyaluronic acid (MeHA)/methacrylated-chitosan (MeCht) blended with marine-origin collagen by droplet-based microfluidics co-flow. Human adipose stem cells (hASCs) and microvascular endothelial cells (hMVECs) were co-encapsulated to create platforms of study relevant for vascularized bone tissue engineering. A specially designed Janus-droplet generator chip was used to fabricate the microcapsules (<250â μm units) and Janus-gradient co-cultures of hASCs: hMVECs were generated in various ratios (90:10; 75:25; 50:50; 25:75; 10:90), through an automated microfluidic flow controller (Elveflow microfluidics system). Such monodisperse 3D co-culture systems were optimized regarding cell number and culture media specific for concomitant maintenance of both phenotypes to establish effective cell-cell (homotypic and heterotypic) and cell-materials interactions. Cellular parameters such as viability, matrix deposition, mineralization and hMVECs re-organization in tube-like structures, were enhanced by blending MeHA/MeCht with marine-origin collagen and increasing hASCs: hMVECs co-culture gradient had significant impact on it. Such Janus hybrid hydrogel microcapsules can be used as a platform to investigate biomaterials interactions with distinct combined cell populations.

Cirurgia de revascularização do miocárdio através de minitoracotomia esquerda

OBJETIVO: Atualmente existe uma tendência mundial para a realização de cirurgias através de incisões mínimas, denominadas minimamente invasivas, tornando o ato operatório cada vez menos agressivo. A introdução desta nova técnica possibilita a dissecção da artéria torácica interna esquerda (ATIE) e sua anastomose com a artéria interventricular anterior (AIA), através de uma minitoracotomia esquerda. MÉTODOS: De maio/96 a outubro/97, 11 portadores de insuficiência coronária, com lesão única e proximal da AIA, foram submetidos a revascularização do miocárdio (RM). A abordagem cirúrgica consistiu de uma toracotomia ântero-lateral esquerda, de aproximadamente 10cm, através do 4º espaço intercostal esquerdo, e nos últimos 6 casos com ressecção de parte da cartilagem da 4ª e 5ª costelas, dissecção da ATIE, abertura e reparo do pericárdio adjacente à AIA. Todos pacientes receberam ponte única para AIA com enxerto da ATIE, sem auxílio de circulação extracorpórea (CEC). RESULTADOS: A idade variou de 46 a 76 (média = 58,55) anos, sendo 10 (90,90%) pacientes do sexo masculino e 1 (9,09%) feminino. O tempo de permanência hospitalar variou de 4 a 8 (média de 5,2) dias. Nenhum paciente apresentou alteração eletrocardiográfica no pós-operatório imediato. Um paciente apresentou no controle, trombose no 1/3 distal da ATIE com comprometimento importante de fluxo e, outro, estenose ao nível da anastomose, sendo ambos submetidos a angioplastia com sucesso. Não houve mortalidade no grupo estudado. CONCLUSÃO: A ausência de mortalidade, sugere que a cirurgia de RM através de cirurgia minimamente invasiva, em grupos selecionados, é uma excelente alternativa de revascularização da AIA.

Targeting renal cell carcinoma with NVP-BEZ235, a dual PI3K/mTOR inhibitor, in combination with sorafenib.

Background: Targeted therapies for metastatic renal cell carcinoma (RCC), including mammalian target of rapamycin (mTOR) inhibitors and small-molecule multikinase inhibitors, have produced clinical effects. However, most patients acquire resistance over time. Thus, new therapeutic strategies need to be developed. Here, we evaluated the effect of the dual PI3K/mTOR inhibitor NVP-BEZ235, in combination with the multikinase inhibitor sorafenib on renal cancer cell proliferation and survival in vitro as well as on tumor growth in vivo.Methods: The renal carcinoma cell lines 786-0 and Caki-1 were treated with NVP-BEZ235 or sorafenib, either alone or in combination. Tumor cell proliferation and apoptosis were investigated in vitro. The anticancer efficacy of NVP-BEZ235 alone, or in combination with sorafenib, was also evaluated on RCC xenografts in nude mice.Results: Treatment of 786-0 and Caki-1 cells with NVP-BEZ235 or sorafenib resulted in reduced tumor cell proliferation and increased tumor cell apoptosis in vitro. The combination of NVP-BEZ235 and sorafenib was more effective than each compound alone. Similarly, in vivo, NVP-BEZ235 or sorafenib reduced the growth of xenografts generated from 786-0 or Caki-1 cells. The antitumor efficacy of NVP-BEZ235 in combination with sorafenib was superior to NVP-BEZ235 or sorafenib alone.Conclusions: Our findings indicate that the simultaneous use of NVP-BEZ235 and sorafenib has greater antitumor benefit compared to either drug alone and thus provides a treatment strategy in RCC.

Severe stroke: patient profile and predictors of favorable outcome.

Summary.  Background:  Severe stroke carries high rates of mortality and morbidity. The aims of this study were to determine the characteristics of patients who initially presented with severe ischemic stroke, and to identify acute and subacute predictors of favorable clinical outcome in these patients. Methods:  An observational cohort study, Acute Stroke Registry and Analysis of Lausanne (ASTRAL), was analyzed, and all patients presenting with severe stroke - defined as a National Institute of Health Stroke Scale score of ≥ 20 on admission - were compared with all other patients. In a multivariate analysis, associations with demographic, clinical, pathophysiologic, metabolic and neuroimaging factors were determined. Furthermore, we analyzed predictors of favorable outcome (modified Rankin scale score of ≤ 3 at 3 months) in the subgroup of severe stroke patients. Results:  Of 1915 consecutive patients, 243 (12.7%) presented with severe stroke. This was significantly associated with cardio-embolic stroke mechanism (odds ratio [OR] 1.74, 95% confidence interval [CI] 1.19-2.54), unknown stroke onset (OR 2.35, 95% CI 1.14-4.83), more neuroimaging signs of early ischemia (mostly computed tomography; OR 2.65, 95% CI 1.79-3.92), arterial occlusions on acute imaging (OR 27.01, 95% CI 11.5-62.9), fewer chronic radiologic infarcts (OR 0.43, 95% CI 0.26-0.72), lower hemoglobin concentration (OR 0.97, 95% CI 0.96-0.99), and higher white cell count (OR 1.05, 95% CI 1.00-1.11). In the 68 (28%) patients with favorable outcomes despite presenting with severe stroke, this was predicted by lower age (OR 0.94, 95% CI 0.92-0.97), preceding cerebrovascular events (OR 3.00, 95% CI 1.01-8.97), hypolipemic pretreatment (OR 3.82, 95% CI 1.34-10.90), lower acute temperature (OR 0.43, 95% CI 0.23-0.78), lower subacute glucose concentration (OR 0.74, 95% CI 0.56-0.97), and spontaneous or treatment-induced recanalization (OR 4.51, 95% CI 1.96-10.41). Conclusions:  Severe stroke presentation is predicted by multiple clinical, radiologic and metabolic variables, several of which are modifiable. Predictors in the 28% of patients with favorable outcome despite presenting with severe stroke include hypolipemic pretreatment, lower acute temperature, lower glucose levels at 24 h, and arterial recanalization.

Reliable tidal volume estimates at the airway opening with an infant monitor during high-frequency oscillatory ventilation.

OBJECTIVE: To assess the suitability of a hot-wire anemometer infant monitoring system (Florian, Acutronic Medical Systems AG, Hirzel, Switzerland) for measuring flow and tidal volume (Vt) proximal to the endotracheal tube during high-frequency oscillatory ventilation. DESIGN: In vitro model study. SETTING: Respiratory research laboratory. SUBJECT: In vitro lung model simulating moderate to severe respiratory distress. INTERVENTION: The lung model was ventilated with a SensorMedics 3100A ventilator. Vt was recorded from the monitor display (Vt-disp) and compared with the gold standard (Vt-adiab), which was calculated using the adiabatic gas equation from pressure changes inside the model. MEASUREMENTS AND MAIN RESULTS: A range of Vt (1-10 mL), frequencies (5-15 Hz), pressure amplitudes (10-90 cm H2O), inspiratory times (30% to 50%), and Fio2 (0.21-1.0) was used. Accuracy was determined by using modified Bland-Altman plots (95% limits of agreement). An exponential decrease in Vt was observed with increasing oscillatory frequency. Mean DeltaVt-disp was 0.6 mL (limits of agreement, -1.0 to 2.1) with a linear frequency dependence. Mean DeltaVt-disp was -0.2 mL (limits of agreement, -0.5 to 0.1) with increasing pressure amplitude and -0.2 mL (limits of agreement, -0.3 to -0.1) with increasing inspiratory time. Humidity and heating did not affect error, whereas increasing Fio2 from 0.21 to 1.0 increased mean error by 6.3% (+/-2.5%). CONCLUSIONS: The Florian infant hot-wire flowmeter and monitoring system provides reliable measurements of Vt at the airway opening during high-frequency oscillatory ventilation when employed at frequencies of 8-13 Hz. The bedside application could improve monitoring of patients receiving high-frequency oscillatory ventilation, favor a better understanding of the physiologic consequences of different high-frequency oscillatory ventilation strategies, and therefore optimize treatment.

Atributos físicos e químicos de substratos compostos por biossólidos e casca de arroz carbonizada

O objetivo deste trabalho foi estudar os atributos físicos e químicos de substratos com diferentes doses de biossólido (BIO) e de casca de arroz carbonizada (CAC), com vistas em obter um meio de crescimento adequado para o desenvolvimento de mudas. Desta forma, utilizando biossólido proveniente da SABESP, estação de Franca (SP), estabeleceu-se um ensaio com os seguintes tratamentos (proporções BIO/CAC): 100/0, 90/10, 80/20, 70/30, 60/40, 50/50, 40/60, 30/70, 20/80, 10/90 e 0/100, os quais foram comparados ao substrato comercial Multiplant®. Foram realizadas análises para determinação dos atributos físicos, como: densidade aparente do substrato, macro e microporosidade, porosidade total, capacidade máxima de retenção de água, e dos atributos químicos dos substratos, como: teores totais de macro e micronutrientes, pH, relação C/N e condutividade elétrica. Com a elevação da dose de BIO no substrato houve aumento da densidade e do percentual de microporos e, conseqüentemente, da capacidade de retenção de água. O BIO apresentou teores razoáveis de nutrientes com destaque para N e P, mas baixos teores de K. Não foram detectados teores de metais pesados superiores aos limites estabelecidos pela Legislação Brasileira no biossólido usado. Comparando-se os valores considerados adequados para o desenvolvimento de mudas encontrados na literatura com os obtidos neste trabalho, encaixaram-se na faixa adequada os substratos cujas doses de biossólido variaram de 30 a 60 %. Nenhum substrato testado, incluindo o do tratamento com substrato comercial, apresentou valores ideais em todas as propriedades estudadas.