On the analytical solution for the slewing flexible beam-like system: analysis of the linear part of the perturbed problem

The dynamical system investigated in this work is a nonlinear flexible beam-like structure in slewing motion. Non-dimensional and perturbed governing equations of motion are presented. The analytical solution for the linear part of these perturbed equations for ideal and for non-ideal cases are obtained. This solution is necessary for the investigation of the complete weak nonlinear problem where all nonlinearities are small perturbations around a linear known solution. This investigation shall help the analyst in the modelling of dynamical systems with structure- actuator interactions.

Modal characteristics of a flexible beam with multiple distributed actuators

A flexible structure with surface-bonded piezoceramic patches is modelled using Timoshenko beam theory. Exact mode shapes and natural frequencies associated with the flexural motion are computed for various piezoceramic distributed actuator arrangements. The effects of patch placement and of shear on the modal characteristics are demonstrated using a cantilevered beam as an example. Perfect bonding of the piezoceramic to the beam substructure is assumed, and for the purposes of this paper only passive piezoceramic properties are considered. The modelling technique and results obtained in a closed form are intended to assist investigations into the modelling and control of active structures with surface-bonded piezoceramic actuators. (C) 2003 Elsevier Science Ltd. All rights reserved.

FlexSIG-Flexible software inspection groupware

The objective of this research is to design and build a groupware system which will allow members of a distributed group more flexibility in performing software inspection. Software inspection, which is part of non-execution based testing in software development, is a group activity. The groupware system aims to provide a system that will improve acceptability of groupware and improve software quality by providing a software inspection tool that is flexible and adaptable. The groupware system provide a flexible structure for software inspection meetings. The groupware system will extend the structure of the software inspection meeting itself, allowing software inspection meetings to use all four quadrant of the space-time matrix: face-to-face, distributed synchronous, distributed asynchronous, and same place-different time. This will open up new working possibilities. The flexibility and adaptability of the system allows work to switch rapidly between synchronous and asynchronous interaction. A model for a flexible groupware system was developed. The model was developed based on review of the literature and questionnaires. A prototype based on the model was built using java and WWW technology. To test the effectiveness of the system, an evaluation was conducted. Questionnaires was used to gather response from the users. The evaluations ascertained that the model developed is flexible and adaptable to the different working modes, and the system is capable of supporting several different models of the software inspection process.

Modélisation d'éléments finis pour les interactions fluide-structure

Cette thèse concerne la modélisation des interactions fluide-structure et les méthodes numériques qui s’y rattachent. De ce fait, la thèse est divisée en deux parties. La première partie concerne l’étude des interactions fluide-structure par la méthode des domaines fictifs. Dans cette contribution, le fluide est incompressible et laminaire et la structure est considérée rigide, qu’elle soit immobile ou en mouvement. Les outils que nous avons développés comportent la mise en oeuvre d’un algorithme fiable de résolution qui intégrera les deux domaines (fluide et solide) dans une formulation mixte. L’algorithme est basé sur des techniques de raffinement local adaptatif des maillages utilisés permettant de mieux séparer les éléments du milieu fluide de ceux du solide que ce soit en 2D ou en 3D. La seconde partie est l’étude des interactions mécaniques entre une structure flexible et un fluide incompressible. Dans cette contribution, nous proposons et analysons des méthodes numériques partitionnées pour la simulation de phénomènes d’interaction fluide-structure (IFS). Nous avons adopté à cet effet, la méthode dite «arbitrary Lagrangian-Eulerian» (ALE). La résolution fluide est effectuée itérativement à l’aide d’un schéma de type projection et la structure est modélisée par des modèles hyper élastiques en grandes déformations. Nous avons développé de nouvelles méthodes de mouvement de maillages pour aboutir à de grandes déformations de la structure. Enfin, une stratégie de complexification du problème d’IFS a été définie. La modélisation de la turbulence et des écoulements à surfaces libres ont été introduites et couplées à la résolution des équations de Navier-Stokes. Différentes simulations numériques sont présentées pour illustrer l’efficacité et la robustesse de l’algorithme. Les résultats numériques présentés attestent de la validité et l’efficacité des méthodes numériques développées.

Design methods of rhombic tensegrity structures

As a special type of novel flexible structures, tensegrity holds promise for many potential applications in such fields as materials science, biomechanics, civil and aerospace engineering. Rhombic systems are an important class of tensegrity structures, in which each bar constitutes the longest diagonal of a rhombus of four strings. In this paper, we address the design methods of rhombic structures based on the idea that many tensegrity structures can be constructed by assembling one-bar elementary cells. By analyzing the properties of rhombic cells, we first develop two novel schemes, namely, direct enumeration scheme and cell-substitution scheme. In addition, a facile and efficient method is presented to integrate several rhombic systems into a larger tensegrity structure. To illustrate the applications of these methods, some novel rhombic tensegrity structures are constructed.

A cognitive processing framework for learning analytics

Incorporating a learner’s level of cognitive processing into Learning Analytics presents opportunities for obtaining rich data on the learning process. We propose a framework called COPA that provides a basis for mapping levels of cognitive operation into a learning analytics system. We utilise Bloom’s taxonomy, a theoretically respected conceptualisation of cognitive processing, and apply it in a flexible structure that can be implemented incrementally and with varying degree of complexity within an educational organisation. We outline how the framework is applied, and its key benefits and limitations. Finally, we apply COPA to a University undergraduate unit, and demonstrate its utility in identifying key missing elements in the structure of the course.

Probabilistic robust control : theory and applications

In this work, the development of a probabilistic approach to robust control is motivated by structural control applications in civil engineering. Often in civil structural applications, a system's performance is specified in terms of its reliability. In addition, the model and input uncertainty for the system may be described most appropriately using probabilistic or "soft" bounds on the model and input sets. The probabilistic robust control methodology contrasts with existing H∞/μ robust control methodologies that do not use probability information for the model and input uncertainty sets, yielding only the guaranteed (i.e., "worst-case") system performance, and no information about the system's probable performance which would be of interest to civil engineers.

The design objective for the probabilistic robust controller is to maximize the reliability of the uncertain structure/controller system for a probabilistically-described uncertain excitation. The robust performance is computed for a set of possible models by weighting the conditional performance probability for a particular model by the probability of that model, then integrating over the set of possible models. This integration is accomplished efficiently using an asymptotic approximation. The probable performance can be optimized numerically over the class of allowable controllers to find the optimal controller. Also, if structural response data becomes available from a controlled structure, its probable performance can easily be updated using Bayes's Theorem to update the probability distribution over the set of possible models. An updated optimal controller can then be produced, if desired, by following the original procedure. Thus, the probabilistic framework integrates system identification and robust control in a natural manner.

The probabilistic robust control methodology is applied to two systems in this thesis. The first is a high-fidelity computer model of a benchmark structural control laboratory experiment. For this application, uncertainty in the input model only is considered. The probabilistic control design minimizes the failure probability of the benchmark system while remaining robust with respect to the input model uncertainty. The performance of an optimal low-order controller compares favorably with higher-order controllers for the same benchmark system which are based on other approaches. The second application is to the Caltech Flexible Structure, which is a light-weight aluminum truss structure actuated by three voice coil actuators. A controller is designed to minimize the failure probability for a nominal model of this system. Furthermore, the method for updating the model-based performance calculation given new response data from the system is illustrated.

Estudo do envelhecimento de poliuretanos aplicados na indústria de petróleo

A indústria do petróleo é um dos setores com maior número de sistemas produtivos empregando alta tecnologia. O Brasil é mundialmente renomado como um líder na extração de petróleo, em águas profundas e ultraprofundas. Dentro da cadeia produtiva, grande parte do petróleo e do gás produzido é escoado através de dutos flexíveis que conectam os poços de produção com as plataformas. Existem dois segmentos dessas linhas que recebem diferentes denominações de acordo com o seu local de aplicação. Quando estão apoiadas sobre o fundo do mar, em condição de serviço estático, são denominados flowlines e quando se elevam do fundo do mar até a plataforma, em condição de serviço dinâmico, são denominados risers. Os tubos projetados para aplicações dinâmicas são dotados de bends stiffeners, componentes com formato cônico e, em geral, de base uretânica que têm a função de fornecer uma transição de rigidez suave entre a estrutura dos tubos flexíveis e a extremamente rígida, à plataforma, não permitindo que este componente infrinja seu raio mínimo de operação. A adequada compreensão dos enrijecedores de curvatura e do material empregado em sua fabricação vem se tornando cada vez mais importante na indústria devido à sua crescente utilização, bem como à ocorrência de falhas que vem sendo constatada nos últimos anos. Este trabalho abordou a variação das propriedades mecânicas de poliuretanos pela ação da hidrólise, calor e pela ação dos raios-UV por envelhecimento acelerado, assim como variação de massa, considerando que esses materiais são projetados para uma vida útil superior a vinte anos para trabalhos imersos em meio aquoso.

Electrotactile touch surface by using transparent graphene

In this work we present a flexible Electrostatic Tactile (ET) surface/display realized by using new emerging material graphene. The graphene is transparent conductor which successfully replaces previous solution based on indium-thin oxide (ITO) and delivers more reliable solution for flexible and bendable displays. The electrostatic tactile surface is capable of delivering programmable, location specific tactile textures. The ET device has an area of 25 cm 2, and consists of 130 μm thin optically transparent (>76%) and mechanically flexible structure overlaid unobtrusively on top of a display. The ET system exploits electro vibration phenomena to enable on-demand control of the frictional force between the user's fingertip and the device surface. The ET device is integrated through a controller on a mobile display platform to generate fully programmable range of stimulating signals. The ET haptic feedback is formed in accordance with the visual information displayed underneath, with the magnitude and pattern of the frictional force correlated with both the images and the coordinates of the actual touch in real time forming virtual textures on the display surface (haptic virtual silhouette). To quantify rate of change in friction force we performed a dynamic friction coefficient measurement with a system involving an artificial finger mimicking the actual touch. During operation, the dynamic friction between the ET surface and an artificial finger stimulation increases by 26% when the load is 0.8 N and by 24% when the load is 1 N. © 2012 ACM.

Identifying the isolated transition metal ions/oxides in molecular sieves and on oxide supports by UV resonance Raman spectroscopy

Isolated transition metal ions/oxides in molecular sieves and on surfaces are a class of active sites for selective oxidation of hydrocarbons. Identifying the active sites and their coordination structure is vital to understanding their essential role played in catalysis and designing and synthesizing more active and selective catalysts. The isolated transition metal ions in the framework of molecular sieves (e.g., TS-1, Fe-ZSM-5, and V-MCM-41) or on the surface of oxides (e.g., MoO3/Al2O3 and TiO2/SiO2) were successfully identified by UV resonance Raman spectroscopy. The charge transfer transitions between the transition metal ions and the oxygen anions are excited by a UV laser and consequently the UV resonance Raman effect greatly enhances the Raman signals of the isolated transition metal ions. The local coordination of these ions in the rigid framework of molecular sieves or in the relatively flexible structure on the surface can also be differentiated by the shifts of the resonance Raman bands. The relative concentration of the isolated transition metal ion/oxides could be estimated by the intensity ratio of Raman bands. This study demonstrates that the UV resonance Raman spectroscopy is a general technique that can be widely applied to the in-situ characterization of catalyst synthesis and catalytic reactions. (C) 2003 Elsevier Science (USA). All rights reserved.

Lead(II) chloride ionic liquids and organic/inorganic hybrid materials - a study of chloroplumbate(II) speciation

A range of chloroplumbate(II) organic salts, based on the two cations, 1-ethyl-3-methylimidazolium and trihexyl(tetradecyl) phosphonium, was prepared by ionothermal synthesis. Depending on the structure of the organic cation and on the molar ratio of PbCl2 in the product,.PbCl2, the salts were room-temperature ionic liquids or crystalline organic/inorganic hybrid materials. The solids were studied using Raman spectroscopy; the crystal structure of [C(2)mim]{PbCl3} was determined and shown to contain 1D infinite chloroplumbate(II) strands formed by edge-sharing tetragonal pyramids of pentacoordinate (PbCl5) units. The liquids were analysed using Pb-207 NMR and Raman spectroscopies, as well as viscometry. Phase diagrams were constructed based on differential scanning calorimetry (DSC) measurements. Discrete anions: [PbCl4](2-) and [PbCl3](-), were detected in the liquid state. The trichloroplumbate(II) anion was shown to have a flexible structure due to the presence of a stereochemically-active lone pair. The relationship between the liquid phase anionic speciation and the structure of the corresponding crystalline products of ionothermal syntheses was discussed, and the data were compared with analogous tin(II) systems.

Insights into cell wall synthesis and cell division in Staphylococcus aureus

Dissertation presented to obtain the Ph.D degree in Biology

Inclusive teaching practice in the Jewish day school: general studies teachers' experiences /

Little research has been done on inclusive education in the context of the Jewish day school general studies classroom. This qualitative case study research examines the inclusive teaching experiences of 2 general studies teachers in their respective grade 4 classrooms in 2 traditionally structured dual curriculum Jewish day schools. Data analysis of qualitative open-ended interviews, classroom observations, postobservation discxissions, and school and formal curriculum documents yielded understandings about the participants' inclusive practice and the challenges of the traditional Jewish day school structure. Eight themes that emerged related to understandings and questions about time limitations, an emphasis on efficiency, the day school structure, inclusion models, the need for increased teacher collaboration, and tension between curriculum-as-plan and curriculum-as-lived. Discussion of the findings suggests the need for further research in inclusion and integrated curriculimi in order to better understand possible restructuring of the traditional Jewish day school fi-om the time efficiency constrained dual curriculiun structure to a more flexible structure conducive of a meaningful and dynamic lived curriculum.