2,3,5-triphenyl-2H-tetrazolium chloride and 2,4,6-tri(2-pyridyl)-s-triazine on the corrosion of mild steel in HCl

Electrochemical measurement, quantum chemical method, and scanning electron microscopy (SEM) were performed to investigate the inhibitive effect of 2,3,5-triphenyl-2H-tetrazolium chloride (TTC) and 2,4,6-tri(2-pyridyl)-s-triazine(TPT) on the corrosion of mild steel in 1mol.L-1 HCl at room temperature. Impedance spectroscopy measurement showed that the polarization resistance increased and that double layer capacitance decreased with the increase in the inhibitive concentration, and the results of potentiodynamic polarization showed that the inhibitors suppressed both cathodic and anodic processes of steel corrosion without change in the mechanism. Higher the orbital density distribution strength of the lowest unoccupied molecular orbital, higher is the molecule dipole, and lower energy gap between the energy of the highest occupied molecular orbital and the energy of the lowest unoccupied molecular orbital resulted in higher inhibitory efficiency. The results of SEM analysis showed that the metal was protected from aggressive corrosion by the addition of TTC and TPT.

The structure of [Co(H-tptz)Cl-3] center dot H2O (tptz=2,4,6-tri(2-pyridyl)-1,3,5-triazine) prepared by crystallization from the ionic liquid, N-butyl-N-methyl-pyrrolidinium bis(trifluoromethanesulfonyl)imide

The structure of tris-chloro[2,6-bis(2'-pyridyl)-4-(2'-pyridinium)-1,3,5-triazine]cobalt(II) monohydrate, [Co(C18H13N6)Cl-3]center dot H2O (C2/c (No. 15), a = 7.783(11), b = 22.42(3), c = 11.001(15) angstrom, beta = 90.05(2)degrees), crystallized from the open air reaction of CoCl2 and 2,4,6-tri(2-pyridyl)-1,3,5-triazine in the ionic liquid, N-butyl-N-methyl-pyrrolidinium bis(trifluoromethanesulfonyl)imide is reported. The structure consists of six coordinate cobalt in an octahedral geometry bonded to the tridentate tptz ligand and three chlorines. The non-coordinating pyridyl group in the tptz ligand is protonated (with the protonated nitrogen crystallographically disordered over two possible sites), providing overall charge neutrality for the complex.

Facile biocatalytic reduction of the carbon-carbon double bond of 5-benzylidenethiazolidine-2,4-diones. Synthesis of ( )-5-(4-{2-[methyl(2-pyridyl)amino]ethoxy}benzyl)thiazolidine-2,4-dione (BRL 49653), its (R)-(+)-enantiomer and analogs.

Cantello, Barrier C. C.; Eggleston, Drake S.; Haigh, David; Haltiwanger, R. Curtis; Heath, Catherine M.; Hindley, Richard M.; Jennings, Keith R.; Sime, John T.; Woroniecki, Stefan R. SmithKline Beecham Pharmaceuticals, Surrey, UK. Journal of the Chemical Society, Perkin Transactions 1: Organic and Bio-Organic Chemistry (1994), (22), 3319-24. Publisher: Royal Society of Chemistry, CODEN: JCPRB4 ISSN: 0300-922X. Journal written in English. CAN 122:105736 AN 1995:237497 CAPLUS (Copyright (C) 2009 ACS on SciFinder (R)) Abstract A novel biotransformation system for the redn. of carbon-carbon double bonds in 5-benzylidenethiazolidine-2,4-diones to give the corresponding 5-benzylthiazolidine-1,4-diones, using whole cells of red yeasts, is described. These reduced compds., which are recovered in good yield, are of potential use in the treatment of non-insulin dependent diabetes mellitus. The mild reaction conditions developed allow redn. of 5-benzylidenethiazolidine-2,4-diones contg. other functionalities which are not compatible with alternative redn. methods. The biocatalytic redn. is enantioselective and the synthesis of R-(+)-5-(4-{2-[methyl(2-pyridyl)amino]ethoxy}benzyl)thiazolidine-2,4-dione by Rhodotorula rubra CBS 6469 and structure confirmation by X-ray crystallog. is detailed. Optimization of reaction conditions (including immobilization) for these whole cell redn. system is described.

Homo-and heteropolymetallic 3-(2-pyridyl)pyrazolate manganese and rhenium complexes

fac-[MBr(CO)(3)(pypzH)] (M = Mn, Re; pypzH = (3-(2-pyridyl) pyrazole) complexes are prepared from fac[ MBr(CO)(3)(NCMe)(2)] and pypzH. The result of their deprotonation depends on the metallic substrate: the rhenium complex affords cleanly the bimetallic compound [fac-{Re(CO)(3)(mu(2)-pypz)}] 2 (mu(2)-pypz = mu(2)-3-(2pyridyl-. 1N) pyrazolate-2. 1N), which was crystallographically characterized, whereas a similar manganese complex was not detected. When two equivalents of pyridylpyrazolate are used, polymetallic species [fac-M(CO) 3(mu(2)-pypz)(mu(3)-pypz) M'] (mu(3)-pypz = mu(3)-3-(2-pyridyl-kappa N-1) pyrazolate-1 kappa 2N, N: 2. 1N:; M = Mn, M' = Li, Na, K; M = Re, M' = Na) are obtained. The crystal structures of the manganese carbonylate complexes were determined. The lithium complex is a monomer containing one manganese and one lithium atom, whereas the sodium and potassium complexes are dimers and reveal an unprecedented coordination mode for the bridging 3-(2-pyridyl) pyrazolate ligand, where the nitrogen of the pyridyl fragment and the nitrogen-1 of pyrazolate are chelated to manganese atoms, and each nitrogen-2 of pyrazolate is coordinated to two alkaline atoms. The polymetallic carbonylate complexes are unstable in solution and evolve spontaneously to [fac-{Re(CO) 3(mu(2)-pypz)}](2) or to the trimetallic paramagnetic species [MnII(mu(2)-pypz) 2{fac-{MnI(CO) 3(mu(2)-pypz)}(2)}]. The related complex cis-[MnCl2(pypzH)(2)] was also synthesized and structurally characterized. The electrochemical behavior of the new homo-and heteropolymetallic 3-(2-pyridyl) pyrazolate complexes has been studied and details of their redox properties are reported.

Structural and Spectral Investigations of Transition Metal Complexes Of Di-2-Pyridyl Ketone N (4), N (4)-Disubstituted Thiosemicarbazones

The study deals with structural and spectral investigations of transition metal complexes of di-2-pyridyl ketone N(4),N(4)-disubstituted thiosemicarbazones. The main objective and scope of the work deals with di-2-pyridyl ketone N(4),N(4)-disubstituted thiosemicarbazones are quardridentate NNNS donor ligands. To chosen this ligand for study because, the ligands are prepared and characterized for the first time, since there are two pyridyl nitorgens, dimmers and polymers of complexes may result leading to interesting structural aspects. The work includes the preparation of the thiosemicarbzones and their structural and spectral studies, synthesis and spectral characterization of complexes of copper(II),,nickel(II),manganese(II), dioxovanadium(V),cobalt(III),zinc(II),cadmium(II) of the ligand HL, synthesis and spectral characterization of complexes of copper(II),manganese(II), of the ligand HL and the development of X-ray quality crystals and its X-ray diffraction studies. The structural characterization techniques are elemental analysis, conductivity measurements, magnetic measurements, electronic spectroscopy, H NMR spectroscopy, Infrared spectroscopy and X-ray crystallography.

Investigations on the Structural, Spectral and Magnetic Interactions of Transition Metal Complexes of Multidentate Ligands from Di-2-pyridyl ketone and N(4)-substituted Thiosemicarbazides

The present work deals with the investigations on sthe structural spectral and magnetic interactions of transition metal complexes of multidentate ligands from D1-2-pyridyl ketone and N(4)-Substituted thiosemicarbazides.Thiosemicarbazones are thiourea derivatives with the general formula R2N— C(S)—NH—N=CR2. In the solution state, the thiosemicarbazones exhibit the thionethiol tautomerism similar to the keto-enol tautomerism, and in solution state the thiol form predominates and a deprotonation at the thiolate group in alcoholic medium enhances the coordination abilities ofthe thiosemicarbazones.The magnetochemistry of metal complexes of di-2-pyridyl ketone is a current hot subject of research, which mainly owes to the excellent structural diversity of the complexes ranging from cubanes to clusters, with promising ferromagnetic outputs.Only few efforts were aimed at the magnetochemistry of metal complexes of thiosemicarbazones, and that too were concerned with the complexes of bisttltioscinicarbazones). However, as far as the monothiosemicarbazones are concerned, the magnetochemistry of transition metal complexes of di-2-pyridyl ketone thiosemicarbazones turned up quite unexplored. Consequently, an investigation into it appeared novel and promising to us and that prompted this study, which can be regarded as the initial step towards exploring the magnetochemistry of thiosemicarbazone complexes, especially of di-2-pyridyl ketone derivatives.We could successfully isolate single crystals suitable for X-ray diffraction for the first three ligands. To conclude, we have synthesized some new thiosemicarbazones and their transition metal complexes and studied their structural, spectral and magnetic attributes. Some ofthe complexes revealed interesting stereochemistries and possible bridging characteristics with spectroscopic evidences. Unfortunately, single crystal Xray diffraction studies could not be carried out for many of these interesting compounds due to the lack of availability of suitable quality single crystals. However, the magnetic studies provided support for the proposed stereochemistry giving evidences for their magnetically concentrated nature. The magnetic susceptibilities measured at six different temperatures in the 80-298 K range are fitted into different magnetic equations, which provided an idea about the magnetic behavior of the compounds under study. Some of the copper, oxovanadium, nickel and cobalt complexes are found to possess anomalous magnetic moments, i.e., they revealed no regular gradation with temperature. However, some other copper complexes are observed to be antiferromagnetic, due to super-exchange pathways. The manganese complexes and one of the cobalt complexes are also observed to be antiferromagnetic in nature. However, some nickel complexes have turned up to be ferromagnetic. Accordingly, the versatile stereoehemistry and magnetic behavior of the complexes studied, prompt us to conclude that the transition metal complexes of di-2-pyridyl ketone thiosemicarbazones are promising systems for potential magnetic applications.

Copper(II) complexes derived from di-2-pyridyl ketone-N4-phenyl-3-semicarbazone: Synthesis and spectral studies

Five copper(II) complexes [CuLCl]2·CuCl2·4H2O (1), [CuLOAc] (2), [CuLNO3]2 (3), [CuLN3] (4) and [CuLNCS]·3/2H2O (5) of di-2-pyridyl ketone-N4-phenyl-3-semicarbazone (HL) were synthesized and characterized by elemental analyses and electronic, infrared and EPR spectral techniques. In all these complexes the semicarbazone undergoes deprotonation and coordinates through enolate oxygen, azomethine and pyridyl nitrogen atoms. All the complexes are EPR active due to the presence of an unpaired electron. EPR spectra of all the complexes in DMF at 77K suggest axial symmetry and the presence of half field signals for the complexes 1 and 3 indicates dimeric structures

Versatile binding properties of a di-2-pyridyl ketone nicotinoylhydrazone ligand: Crystal structure of a Cu(II) complex

Six new copper complexes of di-2-pyridyl ketone nicotinoylhydrazone (HDKN) have been synthesized. The complexes have been characterized by a variety of spectroscopic techniques and the structure of [Cu(DKN)2]·H2O has been determined by single crystal X-ray diffraction. The compound [Cu(DKN)2]·H2O crystallized in the monoclinic space group P21 and has a distorted octahedral geometry. The IR spectra revealed the presence of variable modes of chelation for the investigated ligand. The EPR spectra of compounds [Cu2(DKN)2( -N3)2] and [Cu2(DKN)2( -NCS)2] in polycrystalline state suggest a dimeric structure as they exhibited a half field signal, which indicate the presence of a weak interaction between two Cu(II) ions in these complexes

New mono- and dinuclear ruthenium complexes containing the 3,5-bis(2-pyridyl)pyrazole ligand. Synthesis, characterization and applications

Se han sintetizado dos nuevos complejos mononucleares de Ru, con formula [RuCl2(Hbpp)(dmso)2], a partir de la reacción entre [RuCl2(dmso)4] y Hbpp (3,5-bis(2-piridil)pirazola). El hecho que sólo tres de los seis posibles estereoisómeros se obtengan a partir de esta reacción, se ha racionalizado en base a factores estructurales y electrónicos. Estos complejos se han caracterizado de forma estructural, espectroscópica y electroquímica. En acetonitrilo en medio básico, el isómero trans,cis-[RuCl2(Hbpp)(dmso)2] da lugar a procesos de isomerización de enlace de un ligando dmso cuando el Ru(II) se oxida a Ru(III). Las constantes termodinámicas y cinéticas para el proceso se han determinado por voltametria cíclica. La irradiación de trans,cis-[RuCl2(Hbpp)(dmso)2] y cis(out),cis-[RuCl2(Hbpp)(dmso)2] con luz UV o solar da lugar a reacciones de fotosustitución de un ligando dmso por una molécula de acetonitrilo para dar un nuevo compuesto el cual ha sido caracterizado en solución por técnicas espectroscópicas y electroquímicas. Ambos complejos resultan catalizadores útiles en la transferencia de hidrógeno de isopropanol a acetofenona, obteniéndose 1-feniletanol como único producto y un 42.1% de conversión (36.1 ciclos metálicos) a 80ºC con el isómero trans,cis-[RuCl2(Hbpp)(dmso)2], que resulta significativamente más eficaz que el complejo cis(out),cis-[RuCl2(Hbpp)(dmso)2]. La reacción de cis(out),cis-[RuCl2(Hbpp)(dmso)2] con trpy (2,2':6',2"-terpiridina) da lugar a los dos isómeros geométricos del complejo [Ru(Hbpp)(trpy)(Cl)]+, el in y el out. Estos complejos se han aislado y caracterizado por técnicas estructurales, espectroscópicas y electroquímicas. Estos cloro complejos han sido utilizados como precursores para la síntesis de los complejos análogos con ligandos aqua (in,out-[Ru(Hbpp)(trpy)(H2O)]2+) y piridina (in,out-[Ru(Hbpp)(trpy)(py)]2+), los cuales también han sido aislados y caracterizados. Las propiedades ácido-base de los aqua complejos, y del complejo out-py se han estudiado detalladamente por voltametria cíclica y mediante valoraciones espectrofotométricas ácido-base. El tratamiento matemático de los datos así obtenidos nos ha permitido determinar los valores de pKa para los distintos equilibrios de protonación de los complejos en los estados de oxidación II y III. El complejo out-aqua ha demostrado ser un buen catalizador para la oxidación electroquímica del alcohol benzílico, presumiblemente a benzaldehido. La constante de velocidad de segundo orden para el proceso ha sido determinada como 17.1 M-1 s-1, por simulación matemática. El dímero con un puente cloro, [Ru2Cl(bpp)(trpy)2]2+ ha sido preparado por dos rutas sintéticas diferentes. El dímero análogo con un puente acetato se ha obtenido por reacción del cloro dímero con un exceso de acetato sódico. El dímero con dos ligandos aqua [Ru2(bpp)(trpy)2(OH2)2]3+ puede obtenerse por hidrólisis ácida del complejo con un acetato puente o por hidrólisis básica del complejo con un puente cloro. Estos complejos han sido caracterizados por técnicas estructurales, espectroscópicas y electroquímicas. Las soluciones del dímero con dos ligandos aqua en medio ácido resultan inestables a la coordinación de aniones de la solución con el tiempo. Las propiedades ácido-base del dímero con dos aguas coordinadas han sido estudiadas por voltametria cíclica y mediante experimentos de electrólisis a potencial controlado. El pKa para la desprotonación de uno de los ligandos aqua ha sido determinado mediante una valoración espectrofotométrica ácido-base como 6.7. Este valor tan bajo de pKa se atribuye a la formación de la entidad {Ru2O2H3}, favorable termodinámicamente. Los espectros UV-vis para los distintos estados de oxidación del aqua dímero, de RuIIRuII a RuIIIRuIV, han sido obtenidos por oxidación química y electroquímica del complejo. Se han llevado a cabo estudios cinéticos de la oxidación, paso a paso, de RuII,II a RuIV,IV , y se han determinado las constantes de oxidación de segundo orden para los distintos procesos de oxidación. La capacidad del aqua dímero en la oxidación del agua a oxígeno molecular ha sido investigada en solución homogénea utilizando CeIV como oxidante. La evolución de oxígeno se ha demostrado por cromatografia de gases. Se ha obtenido una eficiencia del 73% y 18.6 ciclos catalíticos, cuando 1.83 x 10-6 moles de dímero se han mezclado con un exceso de 100 equivalentes de cerio. El dímero con dos aguas cataliza también la oxidación del agua de forma heterogénea, con el complejo adsorbido sobre una membrana de nafion, aunque la eficiencia es menor. Se ha propuesto un mecanismo intramolecular para la reacción de oxidación del agua. Consiste en la oxidación a 4 electrones del dímero, de RuII,II a RuIV,IV, el cual reacciona con el agua para formar oxígeno y revierte nuevamente al estado de oxidación II,II. Este modelo es consistente con estudios catalíticos de la evolución de oxígeno en función de las concentraciones de cerio y catalizador, llevados a cabo en solución ácida homogénea, que demuestran que la oxidación a 4 electrones del agua se encuentra catalizada por una sola molécula de complejo bajo concentraciones elevadas de cerio. La constante de pseudo-primer-orden para la evolución de oxígeno tiene un valor de 1.4 x 10-2 s-1, que es uno de los valores de constante más elevados obtenidos hasta la fecha. Desafortunadamente, el aqua dímero se desactiva durante el proceso de catálisis dando lugar a una especie naranja, la cual estamos actualmente tratando de caracterizar.

Zinc(II) mediated synthesis of an N-substituted 2-(2-pyridyl)imidazole from a 1,2-diketone and 2-(aminomethyl)pyridine and its ligational behaviour

Reaction of anhydrous ZnCl2 with the 1:2 condensate (L) of benzil and 2-(aminomethyl)pyridine in methanol gives monomeric ZnL'Cl-2 (1) where L' is 2-[(4,5-diphenyl-2-pyridin-2-yl-1H-imidazol-1-yl)-methyl]pyridine. In the X-ray crystal structure, 1 is found to contain tetrahedral zinc with an N2Cl2 coordination sphere and the N-substituent methylpyridine fragment hanging as a free arm. A tentative mechanism is proposed for the zinc mediated conversion of L-->L'. Demetallation of 1 by the action of aqueous NaOH yields L' in the free state. When L' is reacted with Zn(ClO4)(2).6H(2)O in a 1:2 molar proportion, [Zn(L')(2)](n)(ClO4)(2n).(H2O)(n/2).(CH2Cl2)(n/2) (2) is obtained. The zinc atom in 2, as revealed by X-ray crystallography, has a trigonal bipyramidal N-5 coordination sphere. There are two independent ligands in the asymmetric unit of 2. One of them bonds only to one zinc atom in a bidentate mode with the N-substituent methylpyridine hanging free while the other ligand binds to two different zinc atoms in a tridentate fashion, employing the N-substituent methylpyridine nitrogen atom to form the polymeric one-dimensional chain cation.

Redox chemistry and electronic properties of 2,3,5,6-tetrakis(2-pyridyl)pyrazine-bridged diruthenium complexes controlled by N,C,N '-biscyclometalated ligands

To investigate the consequences of cyclometalation for electronic communication in dinuclear ruthenium complexes, a series of 2,3,5,6-tetrakis(2-pyridyl)pyrazine (tppz) bridged diruthenium complexes was prepared and studied. These complexes have a central tppz ligand bridging via nitrogen-to-ruthenium coordination bonds, while each ruthenium atom also binds either a monoanionic, N,C,N'-terdentate 2,6-bis(2'-pyridyl)phenyl (R-N boolean AND C boolean AND N) ligand or a 2,2':6',2 ''-terpyridine (tpy) ligand. The N,C,N'-, that is, biscyclometalation, instead of the latter N,N', N ''-bonding motif significantly changes the electronic properties of the resulting complexes. Starting from well-known [{Ru(tpy)}(2)(mu-tppz)](4+) (tpy = 2,2':2 '',6-terpyridine) ([3](4+)) as a model compound, the complexes [{Ru(R-N boolean AND C boolean AND N)}(mu-tppz){Ru(tpy)}](3+) (R-N boolean AND C(H)boolean AND N = 4-R-1,3-dipyridylbenzene, R = H ([4a](3+)), CO2Me ([4b](3+))), and [{Ru(R-N boolean AND C boolean AND N)}(2)(mu-tppz)](2+), (R = H ([5a](2+)), CO2Me ([5b](2+))) were prepared with one or two N,C,N'-cyclometalated terminal ligands. The oxidation and reduction potentials of cyclometalated [4](3+) and [5](2+) are shifted negatively compared to non-cyclometalated [3](4+), the oxidation processes being affected more significantly. Compared to [3](4+), the electronic spectra of [5](2+) display large bathochromic shifts of the main MLCT transitions in the visible spectral region with low-energy absorptions tailing down to the NIR region. One-electron oxidation of [3](4+) and [5](2+) gives rise to low-energy absorption bands. The comproportionation constants and NIR band shape correspond to delocalized Robin-Day class III compounds. Complexes [4a](3+) (R = H) and [4b](3+) (R = CO2Me) also exhibit strong electronic communication, and notwithstanding the large redox-asymmetry the visible metal-to-ligand charge-transfer absorption is assigned to originate from both metal centers. The potential of the first, ruthenium-based, reversible oxidation process is strongly negatively shifted. On the contrary, the second oxidation is irreversible and cyclometalated ligand-based. Upon one-electron oxidation, a weak and low-energy absorption arises.

Structure and spectra of dichloro(hydroxy-methoxy-di(2-pyridyl)methane)copper(II)

The non-electrolyte dichloro(hydroxy-methoxy-di(2-pyridylmethane)copper(II), resulting from the reaction of di(2-pyridyl)ketone and copper(II) chloride in methanol solution, was isolated and characterized and its structure was determined by X-ray diffraction. The pyridyl nitrogens and the chloride anions virtually from a basal plane in which lies the copper atom, while the oxygen of the methoxy group is in an apical position at a distance of 2.497 (3)Å. The nitrogenous base adopts the boat conformation with the pyridyl rings forming a dihedral angle of 108.72 (14)°. The nearest interatomic copper distance of 3.940(3)Å precludes copper-copper interactions, while the proximity of copper to the out-of-plane chlorine atoms [3.109(3)Å] suggests weakly bound chloro-bridged dimers. Spectral changes indicate that protic molecules displace the methoxy group and water affords the corresponding 1,1-diol.

Complexes of palladium using di-2-pyridyl ketone as ligand: synthesis, structure and, spectral and catalytic properties

During the reaction of di-2-pyridyl ketone (dpk) with Na(2)[PdCl(4)] in alcoholic media, the C=O fragment of dpk undergoes facile solvolysis and the transformed di-2-pyridyl ketone (dpk(ROH), R = Me or H) binds to palladium as NN-donor. When the reaction is carried out in refluxing methanol, a mono-complex of type [Pd(dpk(MeOH))Cl(2)] is obtained. A similar reaction in ethanol affords a bis-complex of type [Pd(dpk(ROH))(2)]Cl(2). Structure of both the complexes have been determined by X-ray crystallography. In acetonitrile solution the [pd(dpk(MeOH))Cl(2)] and [pd(dpk(ROH))(2)]Cl(2) complexes show intense absorptions in the visible and ultraviolet region, origin of which has been probed through uvr calculations. These two palladium complexes are found to be efficient catalysts for Suzuki cross-coupling reactions.

Adsorption of di-2-pyridyl ketone salicyloylhydrazone on Amberlite XAD-2 and XAD-7 resins: Characteristics and isotherms

The adsorption of DPKSH onto Amberlite XAD-2 (styrene resin) and XAD-7 (acrylic ester resin) has been investigated, at (25 +/- 1)degrees C and pH 4.7. The experimental equilibrium data were fitted to the Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) models. These three models provide a very good fit for both resins and the respective constants K(L), K(F), and K(DR) were calculated. For the same DPKSH concentration interval, the minimum time of contact for adsorption maximum at XAD-7 was smaller than at XAD-2 and the maximum amount of DPKSH adsorbed per gram of XAD-2 is smaller than at XAD-7. The investigation indicates that the mean sorption energy (E) characterizes a physical adsorption and the surfaces of both resins are energetically heterogeneous. The constants obtained in these studied systems were correlated and compared with those obtained for the silica gel/DPKSH system. (C) 2008 Published by Elsevier Inc.