INTERVENÇÕES FISIOTERAPÊUTICAS NUM CONTEXTO LÚDICO JUNTO A CRIANÇAS COM DOENÇAS RESPIRATÓRIAS CRÔNICAS

Verifica-se hoje em dia o aumento da incidência de problemas pulmonares que ocasiona internações hospitalares infantis com maior freqüência. Este projeto baseia-se na visão biopsicossocial da Psicologia da Saúde e leva em conta a valorização de atividades do cotidiano da criança, como o brincar, para sua recuperação. Tem por objetivo principal investigar se a utilização de técnicas interventivas lúdicas em fisioterapia contribui para a melhora dos níveis de oxigenação de crianças asmáticas e por objetivos específicos traçar um breve perfil clínico da criança que procura o Ambulatório de Alergia e Imunologia da Faculdade de Medicina do ABC e verificar a adesão da criança com problemas respiratórios a uma intervenção fisioterapêutica lúdica da criança. A análise qualitativa da intervenção lúdica registra grande envolvimento e participação prazerosa das crianças e ampla aceitação dos pais. Estes resultados sugerem que novas pesquisas sejam realizadas a respeito de intervenções lúdicas em fisioterapia. Utiliza-se de método avaliativo-interventivo quase-experimental. Seus participantes são 58 crianças de ambos os sexos com idade de quatro a 11 anos com as patologias de asma brônquica, bronquite e rinite alérgica, sem a presença da crise. Desenvolve-se por meio de sessão única com cada paciente, com avaliação antes e após da intervenção fisioterápica lúdica por meio das aferições dos sinais vitais, (PA, FC, FR,T°C, incluindo oximetria de pulso e PFE) técnicas de aquecimento, alongamento torácico, fortalecimento abdominal e expansão torácica. Realiza análise qualitativa da responsividade das crianças às técnicas interventivas empregadas no contexto lúdico. Os resultados a respeito do perfil clinico indicam maior incidência de Asma, com 44 casos (75,8620 %), para 11 casos de Rinite (18,9655 %) e apenas três de Bronquite (5,1724 %). Os dados relativos a PA, FC, FR,T°C e ao PFE mostram-se dentro da normalidade. Este estudo não constata diferença significativa em relação ao nível de saturação de O2 após a intervenção lúdica. Quanto à adesão, 55,2 % dos participantes aderiram, sendo que a não adesão deu-se por motivos particulares alegados pelos responsáveis ou indisposição da criança, de dor de cabeça, sonolência e/ou vômito. A análise qualitativa da intervenção lúdica registra grande envolvimento e participação prazerosa das crianças e ampla aceitação dos pais. Estes resultados sugerem que novas pesquisas sejam realizadas a respeito de intervenções lúdicas em fisioterapia.(AU)

INTERVENÇÕES FISIOTERAPÊUTICAS NUM CONTEXTO LÚDICO JUNTO A CRIANÇAS COM DOENÇAS RESPIRATÓRIAS CRÔNICAS

Verifica-se hoje em dia o aumento da incidência de problemas pulmonares que ocasiona internações hospitalares infantis com maior freqüência. Este projeto baseia-se na visão biopsicossocial da Psicologia da Saúde e leva em conta a valorização de atividades do cotidiano da criança, como o brincar, para sua recuperação. Tem por objetivo principal investigar se a utilização de técnicas interventivas lúdicas em fisioterapia contribui para a melhora dos níveis de oxigenação de crianças asmáticas e por objetivos específicos traçar um breve perfil clínico da criança que procura o Ambulatório de Alergia e Imunologia da Faculdade de Medicina do ABC e verificar a adesão da criança com problemas respiratórios a uma intervenção fisioterapêutica lúdica da criança. A análise qualitativa da intervenção lúdica registra grande envolvimento e participação prazerosa das crianças e ampla aceitação dos pais. Estes resultados sugerem que novas pesquisas sejam realizadas a respeito de intervenções lúdicas em fisioterapia. Utiliza-se de método avaliativo-interventivo quase-experimental. Seus participantes são 58 crianças de ambos os sexos com idade de quatro a 11 anos com as patologias de asma brônquica, bronquite e rinite alérgica, sem a presença da crise. Desenvolve-se por meio de sessão única com cada paciente, com avaliação antes e após da intervenção fisioterápica lúdica por meio das aferições dos sinais vitais, (PA, FC, FR,T°C, incluindo oximetria de pulso e PFE) técnicas de aquecimento, alongamento torácico, fortalecimento abdominal e expansão torácica. Realiza análise qualitativa da responsividade das crianças às técnicas interventivas empregadas no contexto lúdico. Os resultados a respeito do perfil clinico indicam maior incidência de Asma, com 44 casos (75,8620 %), para 11 casos de Rinite (18,9655 %) e apenas três de Bronquite (5,1724 %). Os dados relativos a PA, FC, FR,T°C e ao PFE mostram-se dentro da normalidade. Este estudo não constata diferença significativa em relação ao nível de saturação de O2 após a intervenção lúdica. Quanto à adesão, 55,2 % dos participantes aderiram, sendo que a não adesão deu-se por motivos particulares alegados pelos responsáveis ou indisposição da criança, de dor de cabeça, sonolência e/ou vômito. A análise qualitativa da intervenção lúdica registra grande envolvimento e participação prazerosa das crianças e ampla aceitação dos pais. Estes resultados sugerem que novas pesquisas sejam realizadas a respeito de intervenções lúdicas em fisioterapia.(AU)

Resistência à abrasão de aço Hadfield para britadores: efeito do tamanho do abrasivo e do pH do meio.

Neste trabalho, foi investigado o efeito do tamanho do abrasivo e do pH do meio na resistência ao desgaste abrasivo do aço H-13 com matriz martensítica e do aço Hadfield com matriz austenítica. Ensaios de abrasão foram realizados utilizando o equipamento roda de borracha a úmido, variando o tamanho do abrasivo entre 0,15 e 2,40 mm e o pH do meio entre 5,5 e 12,8. As microestruturas dos materiais estudados foram analisadas utilizando microscopia óptica, as superfícies de desgaste e as partículas de desgaste foram analisadas em microscópio eletrônico de varredura. A macrodureza e a microdureza, antes e após os ensaios, foram obtidas utilizando durômetro Vickers. A topografia da região central da superfície de desgaste foi obtida utilizando Perfilometria 3D, visando obter valores de profundidade de penetração do abrasivo. Os resultados mostraram que o aço Hadfield é mais resistente do que o aço H-13 em todos os valores de pH e tamanhos de abrasivo utilizados. Para os dois materiais, a perda de massa aumenta linearmente até um tamanho crítico de abrasivo (TCA) e, após este, a mesma continua a aumentar, mas com uma intensidade menor. Para os dois materiais e para todos os tamanhos de abrasivo, o aumento do pH do meio resultou em menores perdas de massa, sendo este efeito maior para os dois menores tamanhos de abrasivo. Para maiores valores de pH, foram observadas menores profundidades de penetração do abrasivo. A microdureza da superfície de desgaste do aço H-13 sofreu um pequeno aumento com o aumento do tamanho do abrasivo enquanto que para o aço Hadfield esse aumento foi mais intenso. A análise das partículas de desgaste mostraram que, para todas as condições ensaiadas, os debris do aço H-13 tinham duas morfologias, contínuas e descontínuas enquanto que os cavacos do aço Hadfield foram sempre descontínuos. Para os dois materiais, foram observados dois micromecanismos de desgaste, sendo eles microcorte e microsulcamento. Por fim, os resultados apresentados neste trabalho sugerem que a análise de desempenho do aço Hadfield em serviço deve considerar o pH do meio bem como a granulometria do abrasivo em contato.

Capacitación turística en comunidades indígenas. Un caso de Investigación Acción Participativa (IAP)

La literatura académica subraya la importancia de involucrar a la comunidad en los procesos de capacitación turística. Sin embargo, apenas hay reflexiones sobre cómo diseñar e implementar la formación en áreas rurales y remotas. En este trabajo se exponen las cuatro fases de un ciclo de Investigación Acción Participativa (IAP), desarrollada en la Selva Lacandona de México con la colaboración de los grupos originarios lacandones y ch’oles. El objetivo de estudio fue la capacitación humana en las áreas de sistemas turísticos, interpretación del patrimonio natural y cultural, y creación de producto. Todo ello complementado con una capacitación específica para mujeres y jóvenes, grupos tradicionalmente relegados en estas comunidades. El relato de las distintas fases de la IAP nos muestra cómo el conocimiento ancestral es la base para una capacitación turística sólida. La involucración de jóvenes estudiantes en los procesos de formación en comunidades, los formatos adaptados a los contextos locales, y los ejercicios de reciprocidad científica, sirven además para la revitalización cultural, el refuerzo de la autoestima y el desarrollo endógeno de los pueblos indígenas.

Reflexão sobre a integração das tecnologias digitais nas minhas aulas de filosofia

Trabalho de Projeto de Mestrado, Educação (Área de especialidade em Educação e Tecnologias Digitais), Universidade de Lisboa, Instituto de Educação, 2016

Turkey: has the AKP ended its winning streak? OSW Commentary No. 117, 2013-10-07

Since the conservative Justice and Development Party (AKP) took power in Turkey in 2002, it has enjoyed a constant winning streak: it won each election (with a support level of 49.83% in 2011), subordinated the army (which had de facto stood above the civilian government) and was reforming the country. The situation in the country was stable (especially when compared to the crises and restlessness in the 1990s), the economy was booming, Turkey’s position in regional politics was strengthening, and Ankara’s significance on the international arena was growing. This encouraged the ruling class to make long-term plans, leading up to the hundredth anniversary of the republic in 2023. In the coming decade, Turkey governed by the AKP was to become one of the global economic and political centres, a full member of the EU and at the same time a political and economic leader in the Middle East. However, the negative trends in the situation both domestically (mass public protests, the deadlocked Kurdish issue and the unsuccessful attempt to amend the constitution) and abroad (the war in Syria and the coup in Egypt) seen over the past few months have laid bare the limitations of the AKP’s rule and have affected the government’s democratic mandate, prestige and credibility on the international arena, as well as peace and order and domestic security. When compared to the beginning of 2013, the way the situation will develop in Turkey is at this moment definitely less predictable; and the possible scenarios include both relative peace (however, with socio-political tension present in the background) and the threat of destabilisation. Therefore, although the AKP will still remain the sole major political force, this party will have to face challenges which will decide not only its political future but also the directions the country will be developing in. However, a comprehensive solution of the accumulated problems and a simple return to the status quo ante, convenient to the government, seem unlikely in the foreseeable future.

Flashlight Europe N°7–09 July 2015. Greece After the Referendum: Three Possible Scenarios for the Euro Area

About ten days ago Alexis Tsipras, the Greek prime minister, announced that there was going to be a referendum, and thus terminated the negotiations on a new rescue package unilaterally. Since then the euro area has been plunged into a wholly unprecedented political crisis. Whether or not Greece can re-main in the monetary union is more uncertain than ever, and decisions that can give a new twist to the political and financial situation are being made almost every day. The Greek banks have been closed for over a week. The economic data are deteriorating rapidly. And yet a solution is nowhere to be seen. The No vote in the Greek referendum has not exactly improved the chances of reaching an agree-ment. For the time being the positions seem to have become uncompromising. At the summit of the heads of state and government on 7 July the Greek government was given five days and a “final deadline” in order to come up with viable proposals for reform. Thus the next few days are of crucial im-portance. At the weekend the heads of state and government of all 28 EU member states are going to meet in order to decide the future of Greece. This flashlight europe provides an overview of the events of the last few days, outlines possible scenarios for what may happen in the near future, and identifies factors which may exert an influence in the short term. We are not trying to give an exact forecast or to formulate action recommendations. But we are trying to shed some light on a confusing situation by identifying important patterns and some of the salient factors.

Strength-ductility behaviour of Al-Si-Cu-Mg casting alloys in T6 temper

A comparative study of the mechanical properties of 20 experimental alloys has been carried out. The effect of different contents of Si, Cu, Mg, Fe and Mn, as well as solidification rate, has been assessed using a strength-ductility chart and a quality index-strength chart developed for the alloys. The charts show that the strength generally increases and the ductility decreases with an increasing content of Cu and Mg. Increased Fe (at Fe/Mn ratio 0.5) dramatically lowers the ductility and strength of low Si alloys. Increased Si content generally increases the strength and the ductility. The increase in ductility with increased Si is particularly significant when the Fe content is high. The charts are used to show that the cracking of second phase particles imposes a limit to the maximum achievable strength by limiting the ductility of strong alloys. The (Cu + Mg) content (at.%), which determines the precipitation strengthening and the volume fraction of Cu-rich and Mg-rich intermetallics, can be used to select the alloys for given strength and ductility, provided the Fe content stays below the Si-dependent critical level for the formation of pre-eutectic alpha-phase particles or beta-phase plates.

New insights into ancient environments using dental characters in Australian Cenozoic lungfish

Environmentally-related wear conditions and pathologies affecting the dentition of fossil lungfish from freshwater deposits in Australia have been analysed and compared with similar changes in the dentition of the living Australian lungfish, Neoceratodus forsteri. Fossil populations from the Namba, Etadunna, Wipajiri and Katipiri formations in central Australia, and the Carl Creek Limestone and the Camfield beds in northern Australia were assessed. Tooth plates from populations of living lungfish from the Brisbane River and Enoggera Reservoir in southeast Queensland were analysed for comparison. Tooth plates were measured to determine the numbers of different age groups in each population. They were assessed for abrasion, attrition, spur and step wear, erosion and caries, and for trauma and pathological conditions such as malocclusion, hyperplasia, abscesses, osteopenia and parasitic damage. All of these conditions are related to the environment where the fish lived, are found in living members of the group, and can be compared directly with those of fossil relatives. The results suggest that some of the fossil populations were at risk before climatic changes late in the Cainozoic destroyed their habitats. Some fossil lungfish populations, such as those of the Wipajiri Formation, exhibit active spawning and recruitment, good growth rates and a low incidence of disease and environmentally related damage to the tooth plates. Others, like those of the Katipiri and Namba Formations, include no young, and the adult fish were ageing and show environmentally-related damage to the dentition. Etadunna lungfish had active recruitment, but the tooth plates show a high incidence of attrition and caries. Riversleigh lungfish were actively spawning but did not grow large. Tooth plates from this latter deposit have a high incidence of pathological conditions. Fish from the Camfield Beds, where food was severely limiting, had little serious pathology but high levels of caries. Pathologies among living lungfish are common, but fossil fish were comparatively healthy, with few serious dental problems. Information from studies of fossil lungfish confirms that conservation of the few living species of lungfish depends on the maintenance of clean environments that provide adequate supplies of food and suitable sites for spawning and for the growth of young fish.

Mechanistic modelling of pilling. Part I: Detailing of mechanisms

Mechanistic models of pilling are discussed in general terms, and a framework for pilling simulations is thereby created. A fundamental flaw in earlier models of pilling is revealed. A more comprehensive model of fibre diffusion and withdrawal from the fabric is proposed, and this is solved in general terms to find the rate of fuzz growth. Fuzz wear-off and entanglement into pills are discussed. Fibre fatigue is introduced, and it is demonstrated that this potentially increases the rate of withdrawal of anchor fibres.

INTERVENÇÕES FISIOTERAPÊUTICAS NUM CONTEXTO LÚDICO JUNTO A CRIANÇAS COM DOENÇAS RESPIRATÓRIAS CRÔNICAS

Verifica-se hoje em dia o aumento da incidência de problemas pulmonares que ocasiona internações hospitalares infantis com maior freqüência. Este projeto baseia-se na visão biopsicossocial da Psicologia da Saúde e leva em conta a valorização de atividades do cotidiano da criança, como o brincar, para sua recuperação. Tem por objetivo principal investigar se a utilização de técnicas interventivas lúdicas em fisioterapia contribui para a melhora dos níveis de oxigenação de crianças asmáticas e por objetivos específicos traçar um breve perfil clínico da criança que procura o Ambulatório de Alergia e Imunologia da Faculdade de Medicina do ABC e verificar a adesão da criança com problemas respiratórios a uma intervenção fisioterapêutica lúdica da criança. A análise qualitativa da intervenção lúdica registra grande envolvimento e participação prazerosa das crianças e ampla aceitação dos pais. Estes resultados sugerem que novas pesquisas sejam realizadas a respeito de intervenções lúdicas em fisioterapia. Utiliza-se de método avaliativo-interventivo quase-experimental. Seus participantes são 58 crianças de ambos os sexos com idade de quatro a 11 anos com as patologias de asma brônquica, bronquite e rinite alérgica, sem a presença da crise. Desenvolve-se por meio de sessão única com cada paciente, com avaliação antes e após da intervenção fisioterápica lúdica por meio das aferições dos sinais vitais, (PA, FC, FR,T°C, incluindo oximetria de pulso e PFE) técnicas de aquecimento, alongamento torácico, fortalecimento abdominal e expansão torácica. Realiza análise qualitativa da responsividade das crianças às técnicas interventivas empregadas no contexto lúdico. Os resultados a respeito do perfil clinico indicam maior incidência de Asma, com 44 casos (75,8620 %), para 11 casos de Rinite (18,9655 %) e apenas três de Bronquite (5,1724 %). Os dados relativos a PA, FC, FR,T°C e ao PFE mostram-se dentro da normalidade. Este estudo não constata diferença significativa em relação ao nível de saturação de O2 após a intervenção lúdica. Quanto à adesão, 55,2 % dos participantes aderiram, sendo que a não adesão deu-se por motivos particulares alegados pelos responsáveis ou indisposição da criança, de dor de cabeça, sonolência e/ou vômito. A análise qualitativa da intervenção lúdica registra grande envolvimento e participação prazerosa das crianças e ampla aceitação dos pais. Estes resultados sugerem que novas pesquisas sejam realizadas a respeito de intervenções lúdicas em fisioterapia.(AU)

The tribology of linear tape recording systems

This thesis is devoted to the tribology at the head~to~tape interface of linear tape recording systems, OnStream ADRTM system being used as an experimental platform, Combining experimental characterisation with computer modelling, a comprehensive picture of the mechanisms involved in a tape recording system is drawn. The work is designed to isolate the mechanisms responsible for the physical spacing between head and tape with the aim of minimising spacing losses and errors and optimising signal output. Standard heads-used in ADR current products-and prototype heads- DLC and SPL coated and dummy heads built from a AI203-TiC and alternative single-phase ceramics intended to constitute the head tape-bearing surface-are tested in controlled environment for up to 500 hours (exceptionally 1000 hours), Evidences of wear on the standard head are mainly observable as a preferential wear of the TiC phase of the AI203-TiC ceramic, The TiC grains are believed to delaminate due to a fatigue wear mechanism, a hypothesis further confirmed via modelling, locating the maximum von Mises equivalent stress at a depth equivalent to the TiC recession (20 to 30 nm). Debris of TiC delaminated residues is moreover found trapped within the pole-tip recession, assumed therefore to provide three~body abrasive particles, thus increasing the pole-tip recession. Iron rich stain is found over the cycled standard head surface (preferentially over the pole-tip and to a lesser extent over the TiC grains) at any environment condition except high temperature/humidity, where mainly organic stain was apparent, Temperature (locally or globally) affects staining rate and aspect; stain transfer is generally promoted at high temperature. Humidity affects transfer rate and quantity; low humidity produces, thinner stains at higher rate. Stain generally targets preferentially head materials with high electrical conductivity, i.e. Permalloy and TiC. Stains are found to decrease the friction at the head-to-tape interface, delay the TiC recession hollow-out and act as a protective soft coating reducing the pole-tip recession. This is obviously at the expense of an additional spacing at the head-to-tape interface of the order of 20 nm. Two kinds of wear resistant coating are tested: diamond like carbon (DLC) and superprotective layer (SPL), 10 nm and 20 to 40 nm thick, respectively. DLC coating disappears within 100 hours due possibly to abrasive and fatigue wear. SPL coatings are generally more resistant, particularly at high temperature and low humidity, possibly in relation with stain transfer. 20 nm coatings are found to rely on the substrate wear behaviour whereas 40 nm coatings are found to rely on the adhesive strength at the coating/substrate interface. These observations seem to locate the wear-driving forces 40 nm below the surface, hence indicate that for coatings in the 10 nm thickness range-· i,e. compatible with high-density recording-the substrate resistance must be taken into account. Single-phase ceramic as candidate for wear-resistant tape-bearing surface are tested in form of full-contour dummy-heads. The absence of a second phase eliminates the preferential wear observed at the AI203-TiC surface; very low wear rates and no evidence of brittle fracture are observed.

Mechanisms of transfer film formation on data recording heads

The increasing demand for high capacity data storage requires decreasing the head-to-tape gap and reducing the track width. A problem very often encountered is the development of adhesive debris on the heads at low humidity and high temperatures that can lead to an increase of space between the head and media, and thus a decrease in the playback signal. The influence of stains on the playback signal of reading heads is studied using RAW (Read After Write) tests and their influence on the wear of the heads by using indentation technique. The playback signal has been found to vary and the errors to increase as stains form a patchy pattern and grow in size to form a continuous layer. The indentation technique shows that stains reduce the wear rate of the heads. In addition, the wear tends to be more pronounced at the leading edge of the head compared to the trailing one. Chemical analysis of the stains using ferrite samples in conjunction with MP (metal particulate) tapes shows that stains contain iron particles and polymeric binder transferred from the MP tape. The chemical anchors in the binder used to grip the iron particles now react with the ferrite surface to create strong chemical bonds. At high humidity, a thin layer of iron oxyhydroxide forms on the surface of the ferrite. This soft material increases the wear rate and so reduces the amount of stain present on the heads. The stability of the binder under high humidity and under high temperature as well as the chemical reactions that might occur on the ferrite poles of the heads influences the dynamic behaviour of stains. A model of stain formation taking into account the channels of binder degradation and evolution upon different environmental conditions is proposed.

The role of oxidation in the protection of sliding metal surfaces

This study is concerned with the mechanisms of growth and wear of protective oxide films formed under various tribological conditions. In the study three different tribological systems are examined in each of which oxidational wear is the dominant equilibrium mode. These are an unlubricated steel on steel system sliding at low and elevated temperatures, a boundary lubricated aluminium bronze on steel system and an unlubricated reciprocating sliding 9% Cr steel system operated at elevated temperature, in an atmosphere of carbon dioxide. The results of mechanical measurements of wear and friction are presented for a range of conditions of load, speed and temper.ature for the systems, together with the results of extensive examinations of the surfaces and sub­ surfaces by various physical methods of analysis. The major part of the thesis, however, is devoted to the development and application of surface models and theoretical quantative expressions in order to explain the observed oxidational wear phenomena. In this work, the mechanisms of formation of load bearing ox ide plateaux are described and are found to be dependent on system geometry and environment. The relative importance of ''in contact" and "out of contact" oxidation is identified together with growth rate constants appropriate to the two situations. Hypotheses are presented to explain the mechanisms of removal of plateaux to form wear debris. The latter hypotheses include the effects of cyclic stressing and dislocation accumulation, together with effects associated with the kinetics of growth and physical properties of the various oxides. The proposed surf ace mode1s have led to the develop­ ment of quantitative expressions for contact temperature, unlubricated wear rates, boundary lubricated wear rates and the wear of rna ter ial during the transition from severe to mild wear. In general theoretical predictions from these expressions are in very good agreement with experimental values.

The cutting performance of sialon ceramic tools

The thesis deals with a research programme in which the cutting performance of a new generation of ceramic cutting tool material is evaluated using the turning process. In part one, the performance of commercial Kyon 2000 sialon ceramic inserts is studied when machining a hardened alloy steel under a wide range of cutting conditions. The aim is to formulate a pattern of machining behaviour in which tool wear is related to a theoretical interpretation of the temperatures and stresses generated by the chip-tool interaction. The work involves a correlation of wear measurement and metallographic examination of the wear area with the measurable cutting data. Four main tool failure modes are recognised: (a) flank and crater wear (b) grooving wear (c) deformation wear and (d) brittle failure Results indicate catastrophic edge breakdown under certain conditions. Accordingly in part two, the edge geometry is modified to give a double rake tool; a negative/positive combination. The results are reported for a range of workpiece materials under orthogonal cutting conditions. Significant improvements in the cutting performance are achieved. The improvements are explained by a study of process parameters; cutting forces, chip thickness ratio, chip contact length, temperature distribution, stress distribution and chip formation. In part three, improvements in tool performance are shown to arise when the edge chamfer on a single rake tool is modified. Under optimum edge chamfer conditions a substantial increase in tool life is obtained compared with the commercial cutting geometry.