Lag-user method: Using laggards to leverage user innovation

Laggards are the last users to adopt a product. Prior literature on user-led innovation ignores laggards’ impact on innovation. In this paper, we develop the Lag-User Method, through which laggards can generate new ideas. Through six studies with 62 teams in three countries, we apply the method to different technologies and services and present our findings to executives to get managerial insights. Findings reveal that laggards who generate new ideas (lag-users) have different perceptions of user-friendly products and different unfulfilled needs. They prefer simple products. We propose that by involving lag-users in NPD, firms can improve the effectiveness of NPD.

Contribution of Mental Health Service User Groups to Mental Health Services and Policy in Ghana : The Case of Mental Health Society of Ghana

RESUMO: Este estudo procurou documentar a perspectiva (s) dos utentes de saúde mental e das associações de prestadores de cuidados sobre a prestação, o papel e a contribuição de serviços de saúde mental da comunidade tal como foram percebidos por um número de informadores-chave, incluindo os utentes do serviço mentais e os próprios prestadores de cuidados. O caso específico da Sociedade Saúde Mental do Gana (MEHSOG) foi o foco deste estudo. O modelo foi o de um estudo de caso, utilizando discussões de grupo e entrevistas com informadores-chave como instrumentos de recolha de dados. Estas ferramentas de colheita de dados foram complementadas por observações dos participantes e pela revisão de documentos da MEHSOG e dos vários grupos de apoio da comunidade de auto-ajuda que compõem a associação nacional. O estudo revelou que os utentes dos serviços de saúde mental e seus prestadores de cuidados constituem um importante grupo de partes interessadas na prestação de serviços de saúde mental da comunidade e no desenvolvimento de políticas que tenham em conta as necessidades e os direitos das pessoas com doença mental ou epilepsia. O envolvimento da MEHSOG promove a mobilização de membros e famílias relacionadas com a doença mental de beneficiar de serviços de tratamento bem organizados com um impacto significativo na melhoria da saúde e da participação dos utentes dos serviços e seus prestadores de cuidados primários em processos de tomada de decisão da família e na comunidade processos de desenvolvimento. Os utentes dos serviços por beneficiarem de tratamento, e os prestadores de cuidados primários, por se tornarem mais livres e menos sobrecarregados com a responsabilidade de cuidar, podem passar a envolver-se mais em atividades que melhoramo seu estado, o de suas famílias e das comunidades. A advocacia dos membros da MEHSOG para conseguir que a “Mental Health Bill” se transforme numa Lei foi também um desenvolvimento significativo resultante da participação ativa dos utentes do serviço em chamar a atenção para uma nova e inclusiva legislação de saúde mental para o Gana. Entre os fatores e oportunidades que permitiram aos utentes dos serviços de saúde mental e aos prestadores de cuidados primários de pessoas com doença mental apoiar activamente a prestação de serviços de saúde mental comunitária e o desenvolvimento de políticas conta-se a contribuição da sociedade civil do Gana, particularmente o movimento da deficiência, e os esforços anteriores de ONGs em saúde mental e dos profissionais de saúde mental para ter uma nova lei em saúde mental. Observámos um certo número de desafios e barreiras que actuam de forma a limitar a influência dos utentes dos serviços de saúde mental na provisão da saúde mental comunitária e no desenvolvimento de políticas. Entre elas o estigma social contra a doença mental e pessoas com doença mental ou epilepsia e seus cuidadores primaries é um factor chave. O estigma tem alterado a percepção e as análises do público em geral, especialmente dos profissionais de saúde e das autoridades políticas afetando a priorização dos problemas de saúde mental nas políticas e programas. Outro desafio foi a deficiente infra-estrutura disponível para apoiar serviços de saúde mentais que assegurem aos utentes permanecerem em bom estado de saúde e bem-estar para serem advogados de si próprios. A recomendação do presente estudo é que os movimentos de utentes dos serviços de saúde mental são importantes e que eles precisam de ser apoiados e encorajados a desempenhar o seu papel como pessoas com experiência vivida para contribuir para a organização e prestação de serviços de saúde mental, bem como para a implementação, monitorização e avaliação de políticas e programas. ------------------------------------ ABSTRACT: This study sought to document the perspective(s) of mental health users and care-givers associations in community mental health service provision and their role and contribution as it was perceived by a number of key informants including the mental service users and care-givers themselves. The specific case of the Mental Health Society of Ghana (MEHSOG) was the focus of this study. A case study approach was used to with Focus Group Discussions and Key Informants Interviews being the data collection tools that were used. These data collection tools were complemented by participant observations and review of documents of the MEHSOG and the various community self-help peer support groups that make up the national association. The study revealed that mental health service users and their care-givers constitute an important stakeholder group in community mental health service provision and development of policies that factor in the needs and rights of persons with mental illness or epilepsy. MEHSOG’s involvement in mobilising members and education families to come forward with the relations with mental illness to benefit from treatment services were well made a significant impact in improving the health and participation of service users and their primary carers in family decision-making processes and in community development processes. Service users, on benefiting from treatment, and primary care-givers, on becoming freer and less burdened with the responsibility of care, move on to engage in secure livelihoods activities, which enhanced their status in their families and communities. The advocacy MEHSOG members undertook in getting the mental health Bill become Law was also noted as significant development that was realised as a result of active involvement of service users in calling for a new and inclusive mental health legislation for Ghana. Enabling factors and opportunities that enabled mental health service users and primary care-givers of people with mental illness to actively support community mental health service provision and policy development is with the vibrant civil society presence in Ghana, particularly the disability movement, and earlier efforts by NGOs in mental health in Ghana long-side mental health professionals to have a new law in mental health. A number of challenges were also noted which were found to limit the extent to which mental health service users can be influential in community mental health service provision and policy development. Key among them was the social stigma against mental illness and people with mental illness or epilepsy and their primary carers. Stigma has affected perceptions, analyses of the general public, especially health practitioners and policy authorities that it has affected their prioritisation of mental health issues in policies and programmes. Another challenge was the poor infrastructure available to support enhanced mental health care services that ensure mental health service users remain in a good state of health and wellbeing to advocate for themselves. The recommendation from the study is that mental health service user movements are important and need to be supported and encouraged to play their role as persons with lived experience to inform organisation and provision of mental health services as well as design and implementation, monitoring and evaluation of policies and programes.

Testing for tail breaks in currency returns

In this work project we study the tail properties of currency returns and analyze whether changes in the tail indices of these series have occurred over time as a consequence of turbulent periods. Our analysis is based on the methods introduced by Quintos, Fan and Phillips (2001), Candelon and Straetmans (2006, 2013), and their extensions. Specifically, considering a sample of daily data from December 31, 1993 to February 13, 2015 we apply the recursive test in calendar time (forward test) and in reverse calendar time (backward test) and indeed detect falls and rises in the tail indices, signifying increases and decreases in the probability of extreme events.

From user browsing behaviour to user demographics

A Internet conta hoje com mais de 3 mil milhões de utilizadores e esse valor não para de aumentar. Desta forma, proporcionar uma experiência online agradável aos seus utilizadores é cada vez mais importante para as empresas. De modo a tirar partido dos benefícios deste crescimento, as empresas devem ser capazes de identificar os seus clientes-alvo dentro do total de utilizadores; e, subsequentemente, personalizar a sua experiência online. Existem diversas formas de estudar o comportamento online dos utilizadores; no entanto, estas não são ideais e existe uma ampla margem para melhoria. A inovação nesta área pode comportar um grande potencial comercial e até ser disruptiva. Com isto em mente, proponho-me a estudar a possível criacão de um sistema de aprendizagem automática (machine learning) que permita prever informa ações demográficas dos utilizadores estritamente com base no seu comportamento online. Tal sistema poderia constituir uma alternativa às atuais opções, que são mais invasivas; mitigando assim preocupações ao nível da proteção de dados pessoais. No primeiro capítulo (Introdução) explico a motivação para o estudo do comportamento dos utilizadores online por parte de empresas, e descrevo as opções disponíveis atualmente. Apresento também a minha proposta e o contexto em que assenta. O capítulo termina com a identicação de limitações que possam existir a priori. O segundo capítulo (Machine Learning) fornece uma introdução sobre machine learning, com o estudo dos algoritmos que vão ser utilizados e explicando como analisar os resultados. O terceiro capítulo (Implementação) explica a implementação do sistema proposto e descreve o sistema que desenvolvi no decorrer deste estudo, e como integra-lo em sistemas já existentes. No quarto capítulo (Análise e manipulação dos dados), mostro os dados compilados e explico como os recolhi e manipulei para testar a hipótese. No quinto capítulo (Análise de dados e discussão) vemos como e que os dados recolhidos foram usados pelos vários algoritmos para descobrir como se correlacionam com dados dos utilizadores e analiso e discuto os resultados observados. Por fim, o sexto e último capítulo apresenta as conclusões. Dependendo dos resultados, mostro como a hipótese poderia ser melhor testada, ou então discuto os próximos passos para tornar o sistema realidade.

Presentations eBook: according to 1st Workshop with focus on experimental testing of cement-based materials

COST TU 1404

Research posters’ eBook: according to 1st WORKSHOP with “Focus on experimental testing of cement based materials”

COST Action TU 1404

Institutional posters’ eBook: according to 1st Workshop with “Focus on experimental testing of cement based materials”

COST TU 1404

Tube-jack and sonic testing for the evaluation of the state of stress in historical masonry

In the investigation and diagnosis of damages to historical masonry structures, the state of stress of the masonry is an important characteristic that must be determined with as much accuracy as possible. Flat-jack testing is a traditional method used to determine the state of stress in historical masonry structures. However, when irregular masonry is tested the method can cause damage to the masonry units and the accuracy of the method is reduced. An enhanced technique, called tube-jack testing, is being developed at the University of Minho to reduce the damage caused during testing and improve the accuracy when used on irregular masonry. This method uses multiple cylindrical jacks inserted in a line of holes drilled in the mortar joints of the masonry, avoiding damage to the masonry units. Concurrently with the development of tube-jack testing, the effect of stress state on sonic testing is being studied. Sonic testing is often used to determine locations of voids and damage in masonry. The focus of these studies was to determine if the state of stress is influencing the sonic test results. In this paper the results of tube-jack testing and sonic testing on masonry walls, built for the purpose of this study in the laboratory, loaded in compression is presented. The tube-jack testing is used to estimate the state of stress in the masonry and the sonic test results are evaluated based on the effect of the applied load on the wall. Future testing and study are suggested for continued development of these test methods.

Blast loading of masonry infills: testing and simulation

This work intends to present a newly developed test setup for dynamic out-of-plane loading using underWater Blast Wave Generators (WBWG) as loading source. Underwater blasting operations have been, during the last decades, subject of research and development of maritime blasting operations (including torpedo studies), aquarium tests for the measurement of blasting energy of industrial explosives and confined underwater blast wave generators. WBWG allow a wide range for the produced blast impulse and surface area distribution. It also avoids the generation of high velocity fragments and reduces atmospheric sound wave. A first objective of this work is to study the behavior of masonry infill walls subjected to blast loading. Three different masonry walls are to be studied, namely unreinforced masonry infill walls and two different reinforcement solutions. These solutions have been studied previously for seismic action mitigation. Subsequently, the walls will be simulated using an explicit finite element code for validation and parametric studies. Finally, a tool to help designers to make informed decisions on the use of infills under blast loading will be presented.

Antibacterial properties of fibrous stents coated with silver oxide nanocoatings

Stents are rigid and perforated tubular structures, which are inserted into blood vessels in order to prevent or inhibit the constriction of blood flow, restoring the normal blood flow, when blood vessels are clogged, being used in 70% of angioplasties. These medical devices assume great importance in the treatment of cardiovascular diseases (CVD) which are the leading cause of death worldwide. In the European Union CVD account for 40% of deaths and assume an estimated annual cost of 196 billion euros[1]. Stents must possess certain requirements, in order to, adequately, perform its function, such as biocompatibility (so that its use does not c ause damage on the health of its user), mechanical strength, radiopacity (so that it is easy to view), longitudinal flexibility, ease of handling, corrosion resistance and having high strength and high radial expansion ability to recover. Stents can be made of different materials, but metals, particularly stainless steel, are the most common. However, metallic stents present several dRawbacks such as corrosion and restenosis, leading to health complications for the patient, or even death. In order to minimize these disadvantages, new materials, like fibrous materials, have been used [2]. Monofilaments present high potential for stents development because, in addition to its biocompatibility, these materials allow the application of various surface treatments, such as antibacterial coatings. Furthermore, monofilament exhibit excellent mechanical properties, like greater stiffness and good results when subjected to compression, tensile and bending forces, since these forces will be directly supported by the monofilament [3]. To minimize the reaction of the human body and Limit the adhesion of microorganisms to the stent surface, some coatings have been developed, including the use of novel metals with antimicrobial properties, like silver. The main objective of this study was the development of fibrous stents, incorporation of silver oxide nanocoating. For the development of the stent, polyester monofilaments with 0.27mm of diameter were used in braiding technology, with a mandrel diameter of 6mm and a braiding angle of 35⁰. The mechanical behaviour of the stent were evaluated by mechanical testing under longitudinal and radial compression, bending. The results of compressive strength tests are according with value from literature: 1.13 to 2.9 N for radial compression and 0. 16-5.28N to longitudinal compression. From literature is also possible to verify that stents must present 75% of unchanged diameter during the bending test and must possess a porosity between 70% and 80% [4]. The produced polyester stent presents values of 1.29N for radial compression, 0.23N for longitudinal compression, 80% of porosity and 85.5% of unchanged diameter, during bending tests. For the antibacterial functionalization, silver oxide nanocoatings were prepared, through reactive magnetron g, with an Ag target in an Ar +O2 atmosphere. In order to evaluate the nanostructure and morphology of the coatings, d ifferent technique s like X-ray diffraction (XRD), scanning electron microscopy (SEM) and and X- ray photoelectron spectroscopy (XPS were used. From the analyses of XRD it is possible to verify that the peaks corresponds to planes of Ag2 O and MATERIAIS 2015 Porto, 21-23 June, 2015 characterize a cubic phase. The presence of Ag2 O is corroborated by XPS spectrum, where it is possible to observe silver, not only, in oxide state, but a lso in mettalic state, and it is possible to verify the presence of silver clusters, confirmed by SEM analysis. Films’ roughness and topography, parameters influencing the wettability of the surface and microorganism adhesion, were measured by Atomic Force Microscopy (AFM), and it was observed that the roughness is very low (under 10 nm). Coatings’ hydrophobicity and surface tension parameters were determined by contact angle measurement, and it was verified the hydrophobic behavior of the coatings. For antibacterial tests were used Staphylococcus epidermidis strain (IE186) and Staphylococcus aureus(ATCC 6538), and halo inhibition zone tests were realized. Ag+release rates were studied by means of inductively coupled plasma mass spectrometry (ICP -MS). The obtained results suggest that silver oxide coatings do not modify significantly surface properties of the substrate, like hydrophobicity and roughness, and present antimicrobial properties for both bacteria used.

User expectations for media sharing practices in open display networks

Open Display Networks have the potential to allow many content creators to publish their media to an open-ended set of screen displays. However, this raises the issue of how to match that content to the right displays. In this study, we aim to understand how the perceived utility of particular media sharing scenarios is affected by three independent variables, more specifically: (a) the locativeness of the content being shared; (b) how personal that content is and (c) the scope in which it is being shared. To assess these effects, we composed a set of 24 media sharing scenarios embedded with different treatments of our three independent variables. We then asked 100 participants to express their perception of the relevance of those scenarios. The results suggest a clear preference for scenarios where content is both local and directly related to the person that is publishing it. This is in stark contrast to the types of content that are commonly found in public displays, and confirms the opportunity that open displays networks may represent a new media for self-expression. This novel understanding may inform the design of new publication paradigms that will enable people to share media across the display networks.

Testing Nelder-Mead based repulsion algorithms for multiple roots of nonlinear systems via a two-level factorial design of experiments

This paper addresses the challenging task of computing multiple roots of a system of nonlinear equations. A repulsion algorithm that invokes the Nelder-Mead (N-M) local search method and uses a penalty-type merit function based on the error function, known as 'erf', is presented. In the N-M algorithm context, different strategies are proposed to enhance the quality of the solutions and improve the overall efficiency. The main goal of this paper is to use a two-level factorial design of experiments to analyze the statistical significance of the observed differences in selected performance criteria produced when testing different strategies in the N-M based repulsion algorithm. The main goal of this paper is to use a two-level factorial design of experiments to analyze the statistical significance of the observed differences in selected performance criteria produced when testing different strategies in the N-M based repulsion algorithm.

PTX3-based genetic testing for risk of aspergillosis after lung transplant

PTX3-based genetic testing for risk of aspergillosis after lung transplant

Monitorização e controlo em ambientes industriais através de rede de sensores sem fios

Dissertação de mestrado integrado em Engenharia de Telecomunicações e Informática

Desenvolvimento e teste de um sistema para caracterização de materiais magnetoelétricos

Dissertação de mestrado integrado em Engenharia Eletrónica Industrial e Computadores