Nonoxidative thermal degradation kinetic of polyamide 6,6 reinforced with carbon nanotubes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação da reação tecidual de uma resina termoplástica em tecido subcutâneo de ratos

Pós-graduação em Odontologia - ICT

Pre-extrusion aromatization of a soy protein isolate using volatile compounds and flavor enhancers: Effects on physical characteristics, volatile retention and sensory characteristics of extrudates

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação do ciclo de vida dos tubos de PVC produzidos no Brasil

Naturally characterizes the human being the interference in the environment to ensure their survival and also convenience. After numerous environmental accidents caused by unbridled pursuit of this goal, the concern about providing for current needs without compromising the ability of the future generations to supply their own, gained space. In order to contribute to sustainable development the Life Cycle Assessment (LCA) was implemented. This tool is based on the concept that if the environmental impacts of a product or service are known, it is possible to take better decisions concerning its environmental aspects. The purpose of this research is to conduct the LCA of polyvinyl chloride (PVC), the world’s second most consumed thermoplastic. The methodology described in NBR ISO 14040 and NBR ISO 14044 was followed. As a result, the LCA of polyvinyl chloride produced in Brazil was obtained, and, therefore, the inventory of the product in question adapted to Brazilian reality. The research can be applied to various studies considering that actions were taken to ensure that it represents the Brazilian reality. Moreover, the procedures were described to guarantee the greatest transparency possible

Reciclagem de poliestireno expandido: compósito com fibras de algodão para a confecção de placas de circuito impresso

In this work polymeric composites reinforced with cotton fibers, from the textile industry, were developed in order to manufacture printed circuit boards. It was used expanded polystyrene (EPS) as a thermoplastic matrix by melting it. For the obtention of 10% and 15% of fiber volume fraction in cotton fibers composites, it was used wasted cotton fibers as an incentive of recycling and reusing of the domestic and industrial wastes as well as for Expanded Polystyrene(EPS). The mechanical properties of the composites were evaluated by tensile and flexural strength from standardized test methods. Composites were characterized by a Scanning Electron Microscopy (SEM), Thermogravimetry (TG/DTG), Differential Scanning Calorimetry (DSC) and dielectric analysis. The analysis of the results showed that fiber in the composite directly influenced in the thermal and mechanical properties

Reciclagem de poliestireno expandido: compósito com fibras de sisal para confecção de placas de circuito impresso

In this work polystyrene composites reinforced with recycled sisal fibers were processed, in order to apply in the manufacture of printed circuit boards. A thermoplastic matrix of recycled polystyrene was used, this material came from waste expanded polystyrene (EPS) used in appliance's packages. Composites were prepared with 15% and 25% of sisal fibers. To obtain the composites, wasted EPS and natural sisal fibers were chosen, to encourage recycling and reuse of household waste and also the use of renewable resources. The composites were analyzed by standard tensile and flexural test, in order to verify the mechanical properties of the material. The characterization of the composite was done by scanning electron microscopy (SEM) , thermogravimetry (TGA / DTG) , differential scanning calorimetry (DSC) and dielectric analysis . The analysis of the results showed that the percentage of fibers in the composite influences directly the thermal and mechanical properties. Plates with a lower percentage of fibers showed superior properties at a higher percentage. The composite material obtained is easy to process and it's use is feasible for the confection of printed circuit boards, considering it's mechanical, thermal and insulative properties

Cassava wastewater as carbon source for the polyhydroxybutyrate production by Azotobacter vinelandii CCT 2841

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da superfície de fibras de carbono após tratamento de implantação iônica por imersão em plasma (3IP)

In this work, plasma immersion ion implantation (PIII) treatments of carbon fibers (CFs) were performed in order to induce modifications of chemical and physical properties of the CF surface aimed to improve the performance of thermoplastic composite. The samples to be treated were immersed in nitrogen or air glow discharge plasma and pulsed at −3.0 kV for 2.0, 5.0, 10.0, and 15.0 min. After PIII processing, the specimens were characterized by atomic force microscopy (AFM), scanning electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). After CFs treatments, the CF/Polypropylene (PP) composites were produced by hot pressing method. Surface morphology of as-received CFs exhibited some scratches aligned along the fibers due to the fiber manufacturing process. After both treatments, these features became deeper, and also, a number of small particles nonuniformly distributed on the fiber surface can be observed. These particles are product of CF surface sputtering during the PIII treatment, which removes the epoxy layer that covers as-received samples. AFM analyses of CF samples treated with nitrogen depicted a large increase of the surface roughness (Rrms value approximately six times higher than that of the untreated sample). The increase of the roughness was also observed for samples treated by air PIII. Raman spectra of all samples presented the characteristic D- and G-bands at approximately 1355 and 1582 cm−1, respectively. Analysis of the surface chemical composition provided by the XPS showed that nitrogen and oxygen were incorporated onto the surface. The polar radicals formed on the surface lead to increasing of the CF surface energy. Both the modification of surface roughness and the surface oxidation contributed for the enhancement of CF adhesion to the polymeric matrix. These features were confirmed ... (Complete abstract click electronic access below)

Obtenção de compósitos nanoestruturados PSU/nanotubos de carbono pela técnica de eletrofiação

The nanostructured materials over the last decade have been increasing the variety of studies and research applications in many industries. From the understanding and manipulation of nanoscale is possible to obtain high-performance materials. One method, which has been very effective in obtaining of nanostructured composites, is the electrospinning, a technique that uses electrostatic forces to produce fibers from a polymer solution. By understanding and controlling of process conditions, such as solution viscosity, working distance, the velocity of the collector, applied voltage and others conditions, it is possible to obtain fibers in many different morphologies. This work aims to obtain nanostructured composites from polysulfone (PSU) a thermoplastic polymer with high oxidation resistance and good mechanical strength at high temperatures and carbon nanotubes (CNTs) that are excellent reinforcements for polymer materials, their mechanical resistance is greater than that of all known materials; using the electrospinning process via polymer solution. Were used polysulfone solutions, n,n-ndimetil acetamide (PSU / DMAc) and this same solution added of CNTs in order to obtain the nanofibers. In both cases were analyzed the effectiveness of the process from the analysis of fiber diameters, rheological behavior and infrared spectroscopy. The results obtained confirmed the efficiency of the electrospinning process to obtain polymeric fibers

Estudo da modificação superficial de fibras de carbono por meio de tratamentos a plasma para o aumento da adesão na interface de compósitos fibra de carbono/PPS

Pós-graduação em Engenharia Mecânica - FEG

Capacidade de termoplastificação da guta-percha com diferentes conicidades

jObjective: The objective of this study was to evaluate the thermoplasticity of the gutta-percha cones used for root canal obturation: Dentsply convencional (Dentsply Ind. e Com., Petrópolis, RJ, Brazil), Dentsply 0.04, (Dentsply Ind. e Com., Petrópolis, RJ, Brazil), Antaeos 0.04 (VDW GmbH, Munich, Germany), ProTaper (Dentsply Ind. e Com., Petrópolis, RJ, Brazil) and Alfa 0.06 (VDW GmbH, Munich, Germany). Material and method: Specimens of each material (n = 10) were prepared after heating. After 24 hours were again heated to 70 °C and placed between two glass plates and subjected to a compression of 5 kg for 2 minutes. The scanned image of the groups before and after the compression was analyzed with the software Image Tool (UTHSCSA Image Tool for Windows version 3.0, San Antonio, TX, USA). The flow capacity of the different materials was determined by the difference between the initial and final area of each specimen. The results were submitted to ANOVA and Tukey test with significance level of 5%. Result: Among the material evaluated, the gutta-percha cones Alpha 0.06 and ProTaper presented more thermoplasticity than other groups (p < 0.05). The Dentsply gutta-percha presented thermoplasticity intermediate. The groups Dentsply 0.04 and 0.04 showed lower thermoplasticity after heating (p > 0.05). Conclusion: The gutta-percha present different property of thermoplasticity, which is important to selection of thermoplastic obturation techniques.

Otimização do processo de soldagem por resistência elétrica em compósitos PEI/fibras contínuas para aplicações aeronáuticas

Pós-graduação em Engenharia Mecânica - FEG

Vegetal fibers in polymeric composites: a review

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação dos parâmetros tempo, corrente e pressão na soldagem por resistência elétrica de compósitos PEI/fibras contínuas: influência na resistência mecânica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Thermal degradation and lifetime estimation of poly(ether imide)/carbon fiber composites

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)