Furphy as (metafictive) Aboriginal ethnographer

This paper investigates Furphy’s ethnographical writings on Aborigines in the short essays and paragraphs he wrote for the Bulletin and in one of his short stories. It also examines his representation of Toby, a part Aboriginal stockman in Such is Life, and concludes by examining one of the most difficult passages in a colonial era novel, his account of a Palmer River Aboriginal attack, cannibalism, and settler murder in The Buln-buln and the Brolga. These Aboriginal-focussed narratives are told as part of a suite of realistic tales by Barefooted Bob and Tom Collins, by way of counter-narrative to Fred Falkland Pritchard’s fantastical romance/action tales which belong to the ripping yarns/Boy’s Own tradition. The paper argues that, although the narrative method, in its refusal to editorialise, is uncharacteristically and unnervingly oblique, there is more than a little of Lilian Pritchard, the Lady Novelist, in Furphy himself and that the questions he puts into the mouth of the Lady Journalist about Aboriginal culture are probing and pungent.

Polyacrylonitrile nanofibre yarn; electrospinning and their post-drawing behaviour

Polyacrylontrile nanofibre yarns have been successfully produced from an electrospinning setup composing positively and negatively charged spinnerets, a rotating funnel and a yarn winder. Through hot drawing, yarns show compact morphology and improved uniformity and have a significant decrease in both yarn and fibre diameters. The hot drawing has improved the molecular orientation and crystallinity of the fibres. The yarn drawn to 5 times of its original length has been found to have the highest tensile strength and modulus.

Effect of sorghum flour addition on in vitro starch digestibility, cooking quality and consumer acceptability of durum wheat pasta

Whole grain sorghum is a valuable source of resistant starch and polyphenolic antioxidants and its addition into staple food like pasta may reduce the starch digestibility. However, incorporating nondurum wheat materials into pasta provides a challenge in terms of maintaining cooking quality and consumer acceptability. Pasta was prepared from 100% durum wheat semolina (DWS) as control or by replacing DWS with either wholegrain red sorghum flour (RSF) or white sorghum flour (WSF) each at 20%, 30%, and 40% incorporation levels, following a laboratory-scale procedure. Pasta samples were evaluated for proximate composition, in vitro starch digestibility, cooking quality, and consumer acceptability. The addition of both RSF and WSF lowered the extent of in vitro starch digestion at all substitution levels compared to the control pasta. The rapidly digestible starch was lowered in all the sorghum-containing pastas compared to the control pasta. Neither RSF or WSF addition affected the pasta quality attributes (water absorption, swelling index, dry matter, adhesiveness, cohesiveness, and springiness), except color and hardness which were negatively affected. Consumer sensory results indicated that pasta samples containing 20% and 30% RSF or WSF had acceptable palatability based on meeting one or both of the preset acceptability criteria. It is concluded that the addition of wholegrain sorghum flour to pasta at 30% incorporation level is possible to reduce starch digestibility, while maintaining adequate cooking quality and consumer acceptability.

Dietary intake and dietary patterns related to blood pressure

 A sample of middle-aged Australians were consuming excessive amounts of salt from convenience foods and staple foods and consumed insufficient dietary potassium from fruits and vegetables. There needs increased awareness of the dietary sources of salt and potassium to assist in population blood pressure reduction.

The value of visual fleece assessment in addition to objective measurements in identifying Angora goats of greater clean mohair production

Visual assessment of the fleece of Merino sheep is an accepted method to aid genetic improvement but there is little evidence to support the use of visual assessment for improving mohair production. This paper examines the extent that visual traits, including staple length, character (staple crimp), staple definition, tippiness, style and staple entanglement, are related to clean fleece weight in animals of similar live weight and mean fibre diameter (MFD) from the same flock. Measurements were made over 9 shearing periods on a population of castrated Angora males (wethers) goats representing the current range and diversity of genetic origins in Australia, including South African, Texan and interbred admixtures of these and Australian sources (these different genetic origins are defined as Breed in this work). Data on genetic origin, sire, dam, lifetime characteristics (date of birth, dam age, birth weight, birth parity (single or twin), weaning weight), live weight, fleece growth and visual fleece attributes were recorded. A restricted maximum likelihood (REML) model was developed to relate clean fleece weight with age, MFD, average fleece-free live weight, lifetime characteristics and visual fleece attributes. There were separate linear responses of clean fleece weight to MFD and staple length for each age group, a quadratic response to the square root of average fleece-free live weight, an effect of sire breed and linear responses to dam age, staple definition score and character. Depending on age at shearing, the increase in clean fleece weight was between about 50 and 80. g for each increase of 1. μm in MFD. At similar MFD, clean fleece weight was generally greater at summer shearings compared with winter shearings. There was a strong increase in clean fleece weight with average fleece-free live weight up to around 50. kg but little response in clean fleece weight for animals larger than 50. kg. There was some evidence of a smaller increase in clean fleece weight as the age of dam increased. There was an effect of Breed in the model but this effect disappeared when a random sire effect was included in the model. There was a positive response to staple length at some age groups but the response did not differ from zero in other age groups. This response varied from negligible to about 70. g per 1. cm increase in staple length. Clean fleece weight increased about 40. g per unit increase in staple definition score and increased about 30. g for every 4 units increase in the number of staple crimps. There was no evidence that clean fleece weight was affected by staple style, staple tip score or staple entanglement score or lifetime factors such as birth weight, date of birth, birth parity, or weaning weight. The results show that using a combination of measuring MFD and visually assessing the fleece for staple length, staple definition and crimps can help identify the most profitable Angora goats. In this process, the objective measurement of MFD appears essential. Visual assessment will provide some extra benefit in identifying these animals above that provided by measuring MFD alone. Animal size should be considered by mohair producers when identifying more productive mohair producing animals. © 2014 Elsevier B.V.

Lifetime and fleece quality traits associated with the occurrence of entangled mohair staples

Staple entanglement in mohair fleeces occurs when adhesions form between longer and faster growing fibres and shorter and slower growing fibres. This results in accentuated crimp of the longer fibres and an "apparently" reduced staple length. The appearance in the fleece of Angora goats of staple entanglements can lead to the downgrading of the mohair to poorer style and shorter length grades, resulting in up to 60% price reductions. This study examined how staple entanglement score (SES) is related to lifetime factors of Angora goats, and how this relationship can be explained by variations in animal size and fleece attributes. SES was scored using a five-point scale: 5, long free fibres easily separated as no adhesions; 4, some adhesions between fibres; 3, some effort to separate fibres as many adhesions; 2, many adhesions, staple fibres entangled, shortening of staple; 1, very entangled and shortened staple. Measurements were made over 9 shearing periods on a population of Angora castrated males (wethers) goats representing the current range and diversity of genetic origins in Australia, including South African, Texan and interbred admixtures of these and Australian sources. Data on genetic origin, sire, dam, date of birth, dam age, birth weight, birth parity, weaning weight, live weight, fleece growth and fleece attributes were recorded. Two restricted maximum likelihood (REML) models were developed to relate SES with age, animal lifetime factors, fleece quality attributes and live weight. One model allowed fleece quality and live weight traits in the model and the other excluded these traits. Staple entanglement was almost eliminated in mohair harvested from goats shorn every 3. months but was common in mohair from goats shorn twice or once per year. SES was less in goats of Texan genetic background, and was generally less in winter grown mohair. SES was higher for mohair with low fibre curvature (FC, 10°/mm) and a high clean washing yield (CWY, 90%) compared with mohair with low FC and lower CWY (80%), and compared with all mohair with high FC (18°/mm). The response of SES to shearing regime, genetic background, shearing season, age of goat and a response to dam age were almost identical whether or not an adjustment was made for CWY and FC. There was a moderate amount of variability due to sires and individuals. We can conclude that a large part of these effects observed, namely breed, dam age, sire, and a component of the FC and CWY effects, are genetic. Mohair producers can manage the genetic effects by careful selection of sires, especially avoiding those with low CWY or high FC, and avoiding sires with higher levels of staple entanglement or that have produced progeny with higher levels of staple entanglement. Also, unidentified environmental effects are affecting staple entanglement, although a lack of a live weight change effect on entanglement indicates that this effect might not be due to nutrition. © 2013 Elsevier B.V.

Effect of genotype and sex on fiber growth rate of alpacas for their first year of fleece production

The sale of alpaca fiber is the main income for thousands of families in the Central Andes of Peru. Little information exists on the fiber length growth rate of alpaca (FLG), especially throughout their first year of life when the fiber is most valuable. We aimed to determine the monthly FLG of 22 alpaca offspring of two genotypes (9 Suri, 13 Huacaya) and considering sex differences (10 females, 12 males) in the High Andes of Peru. FLG growth was determined using dye-bands. An additive lineal model with three factors (genotype, sex, month) was used for statistic analysis. To evaluate the effect of genotype and sex on the profile of the FLG throughout the year a two factor repeated-measures model was used. The results showed that FLG was affected by genotype and month but not sex. The Suri genotype had 20% higher FLG than Huacaya genotype alpacas (1.34 vs 1.10 cm/month, P < 0.001). FLG increased over each of the first three months (P < 0.05) and then maintained a near constant rate for the remainder of the first year. The resulting staple length indicates that shearing at ages from 8 to 12 months of age will provide fleeces of sufficient length for textile processing.

Recent research and developments on yarn hairiness

Hairiness is an important quality parameter of spun yarns. It not only affects the quality of yarns, but also the weaving and knitting performance of yarns as well as the quality of the resultant fabrics. Various developments regarding yarn hairiness have been reported in the last decade. These cover aspects such as hairiness measurement, modeling, simulation, spinning modifications and post spinning treatments to reduce hairiness. This study is an attempt to critically review all significant recent developments regarding yarn hairiness. Further possibilities of research and future work are also briefly discussed.

Core-spun carbon nanotube yarn supercapacitors for wearable electronic textiles

Linear (fiber or yarn) supercapacitors have demonstrated remarkable cyclic electrochemical performance as power source for wearable electronic textiles. The challenges are, first, to scale up the linear supercapacitors to a length that is suitable for textile manufacturing while their electrochemical performance is maintained or preferably further improved and, second, to develop practical, continuous production technology for these linear supercapacitors. Here, we present a core/sheath structured carbon nanotube yarn architecture and a method for one-step continuous spinning of the core/sheath yarn that can be made into long linear supercapacitors. In the core/sheath structured yarn, the carbon nanotubes form a thin surface layer around a highly conductive metal filament core, which serves as current collector so that charges produced on the active materials along the length of the supercapacitor are transported efficiently, resulting in significant improvement in electrochemical performance and scale up of the supercapacitor length. The long, strong, and flexible threadlike supercapacitor is suitable for production of large-size fabrics for wearable electronic applications.

An improved understanding of the dispersion of multi-walled carbon nanotubes in non-aqueous solvents

The homogeneous and stable dispersion of carbon nanotubes (CNTs) in solvents is often a prerequisite for their use in advanced materials. Dispersion procedures, reagent concentration as well as the interactions among reagent, defective CNTs and near-perfect CNTs will affect the resulting CNT dispersion properties. This study, for the first time, presents a detailed comparison between two different approaches for dispersing CNTs. The results enhance our understanding of the interactions between surfactant, defective CNTs and near-perfect CNTs and thus provide insight into the mechanism of CNT dispersion. Dispersions of "as-produced" short multi-walled carbon nanotubes (MWCNTs) in N,N-dimethylformamide were prepared by two different surfactant (Triton X-100) assisted methods: ultrasonication and ultrasonication followed by centrifugation, decanting the supernatant and redispersing the precipitate. Visual observation and UV-visible spectroscopy results showed that the latter method produce a more stable dispersion with higher MWCNT content compared to dispersions produced by ultrasonication alone. Transmission electron microscopy and Raman spectroscopic investigations revealed that the centrifugation/ decanting step removed highly defective nanotubes, amorphous carbon and excess surfactant from the readily re-dispersible near-perfect CNT precipitate. This is contrary to other published findings where the dispersed MWCNTs were found in the supernatant. Thermogravimetric analysis showed that 95 % of Triton X-100 was removed by centrifugation/decanting step, and the remainder of the Triton X-100 molecules is likely randomly adsorbed onto the MWCNT surface. Infrared spectral analysis suggests that the methylene groups of the polyoxyethylene (aliphatic ether) chains of the residual Triton X-100 molecules are interacting with the MWCNTs. © 2014 Springer Science+Business Media.

Effects of site of assessment and variation in wool quality traits on the tactile assessment of textural greasy wool handle

Variation in textural greasy wool handle across the fleece of Merino sheep was explored. Results demonstrate that there were significant differences across nine sites on the fleece. The inclusion of the covariates fibre diameter, fibre diameter co-efficient of variation, staple length, dust penetration, staple structure, greasy wool colour and resistance to compression, helped to explain some of the variation in textural greasy wool handle between sites such that site of assessment was no longer a significant factor (P ≤ 0.065). However, in practice, those involved with clip preparation or sheep selection based on textural greasy wool handle assessment are unlikely to have these measurements available. The results highlight the importance of nominating a site of assessment when recording textural greasy wool handle. © CSIRO 2014.

Physical properties of novel co-woven-knitted fabrics

 Co-woven-knitted (CWK) fabrics have been reported previously. Historically these unique structures have been used to develop composite and shielding fabrics. In this study, novel CWK structures with unique appearances was developed with a modified machine using wool and polyester yarns. The physical properties of these fabrics were compared with conventional woven and knitted fabrics. The thickness of the CWK fabrics was similar to knits. The fabrics showed a unique tensile strength, with higher bending rigidity, and performed better in abrasion resistance.

Relationships between wearer assessment and the instrumental measurement of the handle and prickle of knitted wool fabrics

The relationships between wearer-assessed comfort and objectively measured comfort and handle parameters were investigated using 19 pure wool single jersey garments made of single ply yarns. Wearer trials were used to determine prickle discomfort, and whether wearers “liked” the garments. Fabrics then were objectively evaluated using the Wool HandleMeter, which measures seven primary handle attributes; and the Wool ComfortMeter (WCM), to predict a wearer's perception of fabric-evoked prickle. Wearer responses and the relationships within and between objective measurements and the effect of fibre, yarn and fabrics attributes were analysed by general linear modelling. Mean fibre diameter, fibre diameter coefficient of variation, yarn count, fabric thickness, fabric density, fabric mass per unit area and decatising affected one or more handle parameters. The best model for predicting wearer prickle discomfort accounted for 90.9% of the variance and included only terms for the WCM and WCM2. The WCM was a good predictor whereas mean fibre diameter was a poor predictor of whether wearers “liked” garments. Wearer assessment of prickle and whether or not wearers “liked” fabrics were independent of fabric handle assessment. The results indicate that the handle and comfort properties of lightweight, wool jersey fabrics can be quantified accurately using the Wool HandleMeter and the Wool ComfortMeter. For fabric handle, fibre and yarn characteristics were less important than changes in the properties of the fabric.