Modeling of electrolyte sorption – from phase equilibria to dynamic separation systems

In this thesis, general approach is devised to model electrolyte sorption from aqueous solutions on solid materials. Electrolyte sorption is often considered as unwanted phenomenon in ion exchange and its potential as an independent separation method has not been fully explored. The solid sorbents studied here are porous and non-porous organic or inorganic materials with or without specific functional groups attached on the solid matrix. Accordingly, the sorption mechanisms include physical adsorption, chemisorption on the functional groups and partition restricted by electrostatic or steric factors. The model is tested in four Cases Studies dealing with chelating adsorption of transition metal mixtures, physical adsorption of metal and metalloid complexes from chloride solutions, size exclusion of electrolytes in nano-porous materials and electrolyte exclusion of electrolyte/non-electrolyte mixtures. The model parameters are estimated using experimental data from equilibrium and batch kinetic measurements, and they are used to simulate actual single-column fixed-bed separations. Phase equilibrium between the solution and solid phases is described using thermodynamic Gibbs-Donnan model and various adsorption models depending on the properties of the sorbent. The 3-dimensional thermodynamic approach is used for volume sorption in gel-type ion exchangers and in nano-porous adsorbents, and satisfactory correlation is obtained provided that both mixing and exclusion effects are adequately taken into account. 2-Dimensional surface adsorption models are successfully applied to physical adsorption of complex species and to chelating adsorption of transition metal salts. In the latter case, comparison is also made with complex formation models. Results of the mass transport studies show that uptake rates even in a competitive high-affinity system can be described by constant diffusion coefficients, when the adsorbent structure and the phase equilibrium conditions are adequately included in the model. Furthermore, a simplified solution based on the linear driving force approximation and the shrinking-core model is developed for very non-linear adsorption systems. In each Case Study, the actual separation is carried out batch-wise in fixed-beds and the experimental data are simulated/correlated using the parameters derived from equilibrium and kinetic data. Good agreement between the calculated and experimental break-through curves is usually obtained indicating that the proposed approach is useful in systems, which at first sight are very different. For example, the important improvement in copper separation from concentrated zinc sulfate solution at elevated temperatures can be correctly predicted by the model. In some cases, however, re-adjustment of model parameters is needed due to e.g. high solution viscosity.

First identification of natural infection of Rickettsia rickettsii in the Rhipicephalus sanguineus tick, in the State of Rio de Janeiro

The Brazilian Spotted Fever (BSF) is a zoonotic disease caused by Rickettsia rickettsii and transmitted by ticks of the genus Amblyomma, more frequently, Amblyomma cajennense. The aim of this paper was to report the first molecular detection of R. rickettsii on R. sanguineus naturally infected in Rio de Janeiro, Brazil. Ticks were collected from dogs in a rural region of Resende municipality, Rio de Janeiro State, Brazil (22º30'9.46"S, 44º42'44.29"WO), where occurred five human cases of BSF in 2006. The ticks were identified under a stereoscopic microscope and separated in pools by stages, species and sex. DNA extraction was carried out using QIAamp DNA Mini Kit (QIAGEN®). The DNA was submitted to PCR amplification using 04 set of primers: Rr190.70p/Rr190.602n (OmpA, 532bp), BG1-21/BG2-20 (OmpB, 650bp), Tz15/Tz16 (17 kDa protein-encoding gene, 246bp) and RpCS.877p/RpCS.1258n (gltA, 381bp). PCR products were separated by electrophoresis on 1% agarose gels and visualized under ultraviolet light with ethidium bromide. PCR products of the expected sizes were purified by QIAquick® and sequenced by ABI PRISM®. The generated nucleotide sequences were edited with using Bioedit® software and compared with the corresponding homologous sequences available through GenBank, using Discontiguous Mega Blast (http://www.ncbi.nlm.nih.gov). It was confirmed R. rickettsii by sequencing of the material (GenBank FJ356230). The molecular characterization of R. rickettsii in the tick R. sanguineus emphasizes the role of dogs as carriers of ticks from the environment to home. Moreover, this result suggests that there is a considerable chance for active participation of R. sanguineus as one of tick species in the transmission of R. ricketsii to human being in the Brazilian territory.

Simulointi- ja ohjausjärjestelmän kehitys siltanosturiavusteiseen automaattivarastoon

Diplomityö tehtiin Konecranes Oyj:lle, joka on nostureita valmistava ja niille kunnossapitopalveluita tarjoava suomalainen pörssiyhtiö. Työn kuluessa suunniteltiin ja toteutettiin siltanosturiavusteisiin automaattivarastoihin soveltuva simulointiohjelmisto ja varastonohjausjärjestelmä. Työssä keskityttiin pääsääntöisesti paperirullavarastoihin, mutta suunnitteluvaiheessa otettiin huomioon myös muut Konecranesin tarjontaan kuuluvat automaattivarastotyypit kuten vaakarulla ja kontti. Simulointiohjelmistolla mallinnetaan automaattivarastossa tapahtuvia liikkeitä. Käyttäjä pystyy näkemään nostureiden ja muiden varastossa olevien komponenttien liikkeet 3D- muotoisena simulaattorin käyttöliittymästä. Simulaattorin tavoitteena on helpottaa automaattivaraston suunnittelua ja nopeuttaa sen käyttöönottoa, sekä toimia myös vakuuttavana myyntityökaluna asiakaskontakteissa. Varastonohjausjärjestelmä tekee päätökset varaston tapahtumista ja ohjaa mm. nostureiden toimintaa. Diplomityön päämääränä oli perehtyä tarkasti nykyisen varastonohjausjärjestelmän toimintaan, kehittää uusi ratkaisumalli puutteiden sekä toiveiden perusteella ja lopulta osoittaa ratkaisumallin toimivuus ohjelmoimalla esittelyversio simulaattorista ja varastonohjausjärjestelmästä. Samaa varastonohjausjärjestelmää on määrä käyttää simulaattorissa ja tulevaisuudessa todellisen varaston ohjaamisessa. Asetetuista vaatimuksista johtuen järjestelmästä suunniteltiin mahdollisimman mukautuva. Työn lopputuloksena saatiin perusominaisuudet kattava 3D-simulaattori ja siihen liitetty varastonohjausjärjestelmä. Toteutuksen avulla oli mahdollista osoittaa ratkaisumallin toimivuus sekä esitellä ideaa laajamittaisemmin. Diplomityön kuluessa saatiin nykyisestä järjestelmästä kattavat tiedot ja pystyttiin määräämään suunta, kuinka kehitystyötä jatketaan.

Anaplasma marginale infection in cattle from south-western Amazonia

The present study provides the first epidemiological data regarding infection by Anaplasma marginale in cattle reared in south-western Brazilian Amazonia. One simple procedure was adapted for the extraction of DNA from blood clots collected in seven microregions of Rondônia State and two mesoregions of Acre State. PCR method was used to asses the frequency of A. marginale infections in 4 to12-month-old cattle. The cattle infection was investigated by polymerase chain reaction (PCR) using the specific primer "msp5" for A. marginale. The DNA amplifications revealed that the mean frequency of A. marginale infection was 98.6% (1,627/1,650) in samples from Rondonia, and 92.87% (208/225) in samples from Acre. The high frequency of A. marginale infections in 4 to 12-month-old cattle indicate a situation of enzootic stability in the studied areas and are comparable to those detected by immunodiagnosis in different endemic regions in Brazil. The DNA extraction of clotted blood method described here can be used for epidemiological studies on anaplasmosis and other bovine hemoparasites.

Polymerase chain reaction for the diagnosis of bovine genital campylobacteriosis

Bovine genital campylobacteriosis is a common venereal disease of cattle; the prevalence of this disease can be underestimated mostly because of the nature of the etiological agent, the microaerobic Campylobacter fetus subspecies venerealis. The purpose of the current study was to evaluate the utilization of polymerase chain reaction (PCR) in the diagnosis of genital campylobacteriosis in samples obtained from bull prepuce aspirate, cow cervical mucus, and abomasum contents of aborted fetuses, collected into enrichment medium. Five different DNA extraction protocols were tested: thermal extraction, lysis with proteinase K, lysis with guanidine isothiocyanate, lysis with DNAzol, and lysis with hexadecyltrimethylammonium bromide (CTAB). The specificity, sensitivity, and technical application of the PCR assay were also evaluated with clinical samples and compared to bacterial isolation by standard culture. DNA extraction by the CTAB protocol provided better results in PCR, and it was able to detect 63 colony-forming units per ml of C. fetus. Out of 277 clinical samples tested, 68 (24%) were positive for Campylobacter fetus using PCR, while only 8 (2.8%) of the samples were positive by bacterial isolation in solid medium, proving the superiority of the PCR technique when compared to the standard isolation method, and providing evidence for its usefulness as a better screening test in cattle for the diagnosis of bovine genital campylobacteriosis.

Mycoplasma agalactiae in semen and milk of goat from Pernambuco state, Brazil

In goat and sheep flocks, mycoplasmosis is a disease that may cause severe economical losses associated with polyarthritis, mastitis, agalactia, conjunctivitis, pneumonia and reproductive failure. The latter may involve repeat breeding, granular vulvovaginitis, infertility and abortions. The aim of the present study was to assess the occurrence of Mycoplasma agalactiae (Ma) in semen and milk samples from naturally infected goat in the semiarid region from Pernambuco State, Northeast from Brazil. Thirty-nine semen samples and 81 milk samples were submitted to DNA extraction using a commercially available kit and following the manufacturer's instructions. The polymerase chain reaction (PCR) was then performed in accordance with protocols described in the literature. The results of the present study revealed the presence of Ma in the DNA of 17.9% (7/39) of the semen samples and 3.7% (3/81) of the milk samples. The results obtained in the present study confirm the elimination of the DNA of Ma in the semen and milk samples. The presence of this agent in goat flocks is considered very risky in terms of reproductive disorders and contagious agalactia outbreaks in the Northeast region of Brazil.

Genetic polymorphism of fifteen microsatellite loci in Brazilian (blue-egg Caipira) chickens

The purpose of this study was to investigate the genetic polymorphism of fifteen microsatellites loci in Brazilian (blue-egg Caipira) chickens. Samples were collected from 100 blue eggs of Caipira chickens from rural properties in the city of Dois Lajeados, RS. After DNA extraction, the fragments related to molecular markers LEI0248, LEI0221, LEI0214, LEI0192, LEI0217, LEI0254, LEI0194, LEI0212, MCW0371, ADL0278, LEI0234, MCW0183, MCW0216, MCW0330 and MCW0081 were obtained by polymerase chain reaction (PCR). The statistical analysis were carried out with the softwares ARLEQUIN 3.5 version and CERVUS 3.0.3 version. The allelic and genotypic frequencies, deviations from Hardy-Weinberg equilibrium, estimates of observed (HO) and expected (HE) heterozygosity and polymorphic information content (PIC) were obtained for each marker locus. A total of 186 alleles from 15 loci were obtained, with sizes ranging of 83 to 490 base pairs. The medium number of alleles was 12.4, the HE was 0.76±0.14 and HO was 0.49±0.21 and PIC was 0.706. The first conclusion is that the microsatellites used are polymorphic and can be used to genetic studies in chickens. The second is that the "Caipira" chicken (blue eggs) population investigated has a great genic variability, which makes than an important source of genetic resources for future animal breeding programs.

Treponema denticola in microflora of bovine periodontitis

Periodontitis in cattle is an infectious purulent progressive disease associated with strict anaerobic subgingival biofilm and is epidemiologically related to soil management at several locations of Brazil. This study aimed to detect Treponema species in periodontal pockets of cattle with lesions deeper than 5mm in the gingival sulcus of 6 to 24-month-old animals considered periodontally healthy. We used paper cones to collect the materials, after removal of supragingival plaques, and kept frozen (at -80°C) up to DNA extraction and polymerase chain reaction (PCR) using T. amylovorum, T. denticola, T. maltophilum, T. medium and T. vincentii primers. In periodontal pocket, it was possible to identify by PCR directly, the presence of Treponema amylovorum in 73% of animals (19/26), T. denticola in 42.3% (11/26) and T. maltophilum in 54% (14/26). Among the 25 healthy sites, it was possible to identify T. amylovorum in 18 (72%), T. denticola in two (8%) and T. maltophilum in eight (32%). Treponema medium and T. vincentii were not detected over all 51 evaluated samples. The presence of Treponema amylovorum, T. maltophilum and, in particular, the widely recognized T. denticola in subgingival microflora brings an original and potencially important contribution in studies of the bovine periodontitis.

Liposomes as a gene delivery system

Gene therapy is an active field that has progressed rapidly into clinical trials in a relatively short time. The key to success for any gene therapy strategy is to design a vector able to serve as a safe and efficient gene delivery vehicle. This has encouraged the development of nonviral DNA-mediated gene transfer techniques such as liposomes. Many liposome-based DNA delivery systems have been described, including molecular components for targeting given cell surface receptors or for escaping from the lysosomal compartment. Another recent technology using cationic lipids has been evaluated and has generated substantial interest in this approach to gene transfer.

Optimization and Measuring Techniques for Collect-and-Place Machines in Printed Circuit Board Industry

This thesis considers optimization problems arising in printed circuit board assembly. Especially, the case in which the electronic components of a single circuit board are placed using a single placement machine is studied. Although there is a large number of different placement machines, the use of collect-and-place -type gantry machines is discussed because of their flexibility and increasing popularity in the industry. Instead of solving the entire control optimization problem of a collect-andplace machine with a single application, the problem is divided into multiple subproblems because of its hard combinatorial nature. This dividing technique is called hierarchical decomposition. All the subproblems of the one PCB - one machine -context are described, classified and reviewed. The derived subproblems are then either solved with exact methods or new heuristic algorithms are developed and applied. The exact methods include, for example, a greedy algorithm and a solution based on dynamic programming. Some of the proposed heuristics contain constructive parts while others utilize local search or are based on frequency calculations. For the heuristics, it is made sure with comprehensive experimental tests that they are applicable and feasible. A number of quality functions will be proposed for evaluation and applied to the subproblems. In the experimental tests, artificially generated data from Markov-models and data from real-world PCB production are used. The thesis consists of an introduction and of five publications where the developed and used solution methods are described in their full detail. For all the problems stated in this thesis, the methods proposed are efficient enough to be used in the PCB assembly production in practice and are readily applicable in the PCB manufacturing industry.

Local Binary Patterns in Focal-Plane Processing. Analysis and Applications

Feature extraction is the part of pattern recognition, where the sensor data is transformed into a more suitable form for the machine to interpret. The purpose of this step is also to reduce the amount of information passed to the next stages of the system, and to preserve the essential information in the view of discriminating the data into different classes. For instance, in the case of image analysis the actual image intensities are vulnerable to various environmental effects, such as lighting changes and the feature extraction can be used as means for detecting features, which are invariant to certain types of illumination changes. Finally, classification tries to make decisions based on the previously transformed data. The main focus of this thesis is on developing new methods for the embedded feature extraction based on local non-parametric image descriptors. Also, feature analysis is carried out for the selected image features. Low-level Local Binary Pattern (LBP) based features are in a main role in the analysis. In the embedded domain, the pattern recognition system must usually meet strict performance constraints, such as high speed, compact size and low power consumption. The characteristics of the final system can be seen as a trade-off between these metrics, which is largely affected by the decisions made during the implementation phase. The implementation alternatives of the LBP based feature extraction are explored in the embedded domain in the context of focal-plane vision processors. In particular, the thesis demonstrates the LBP extraction with MIPA4k massively parallel focal-plane processor IC. Also higher level processing is incorporated to this framework, by means of a framework for implementing a single chip face recognition system. Furthermore, a new method for determining optical flow based on LBPs, designed in particular to the embedded domain is presented. Inspired by some of the principles observed through the feature analysis of the Local Binary Patterns, an extension to the well known non-parametric rank transform is proposed, and its performance is evaluated in face recognition experiments with a standard dataset. Finally, an a priori model where the LBPs are seen as combinations of n-tuples is also presented

Methylation status of ANAPC1, CDKN2A and TP53 promoter genes in individuals with gastric cancer

Gastric cancer is the forth most frequent malignancy and the second most common cause of cancer death worldwide. DNA methylation is the most studied epigenetic alteration, occurring through a methyl radical addition to the cytosine base adjacent to guanine. Many tumor genes are inactivated by DNA methylation in gastric cancer. We evaluated the DNA methylation status of ANAPC1, CDKN2A and TP53 by methylation-specific PCR in 20 diffuse- and 26 intestinal-type gastric cancer samples and 20 normal gastric mucosa in individuals from Northern Brazil. All gastric cancer samples were advanced stage adenocarcinomas. Gastric samples were surgically obtained at the João de Barros Barreto University Hospital, State of Pará, and were stored at -80°C before DNA extraction. Patients had never been submitted to chemotherapy or radiotherapy, nor did they have any other diagnosed cancer. None of the gastric cancer samples presented methylated DNA sequences for ANAPC1 and TP53. CDKN2A methylation was not detected in any normal gastric mucosa; however, the CDKN2A promoter was methylated in 30.4% of gastric cancer samples, with 35% methylation in diffuse-type and 26.9% in intestinal-type cancers. CDKN2A methylation was associated with the carcinogenesis process for ~30% diffuse-type and intestinal-type compared to non-neoplastic samples. Thus, ANAPC1 and TP53 methylation was probably not implicated in gastric carcinogenesis in our samples. CDKN2A can be implicated in the carcinogenesis process of only a subset of gastric neoplasias.

Prevalence of BRCA1 and BRCA2 gene mutations in families with medium and high risk of breast and ovarian cancer in Brazil

Of all malignant neoplasias affecting women, breast cancer has the highest incidence rate in Brazil. The objective of the present study was to determine the frequency of genetic modifications in families with medium and high risk for breast and ovarian cancer from different regions of Brazil. An exploratory, descriptive study was carried out on the prevalence of the BRCA1 and BRCA2 mutations in case series of high-risk families for breast and/or ovarian cancer. After heredogram construction, a blood sample was taken and DNA extraction was performed in all index cases. The protein truncation test was used to screen for truncated mutations in exon 11 of the BRCA1 gene and in exons 10 and 11 of the BRCA2 gene. Of the 612 individuals submitted to genetic testing, 21 (3.4%), 19 women and 2 men, had mutations in the BRCA1 or BRCA2 genes. Of the 19 BRCA1 mutations found in the 18 participants, 7 consisted of ins6kb mutations, 4 were 5382insC, 3 were 2156delGinsCC, 2 were 185delAG, 1 was C1201G, 1 was C3522T, and 1 was 3450del4. With respect to the BRCA2 gene, 3 mutations were found: 5878del10, 5036delA and 4232insA (one case each). The prevalence of germline mutations in the BRCA1 and BRCA2 genes found in the present study was lower than reported by other studies on high-risk Brazilian populations. The inclusion of individuals with medium risk may have contributed to the lower prevalence observed.

Electromagnetic and thermal design of a multilevel converter with high power density and reliability

Electric energy demand has been growing constantly as the global population increases. To avoid electric energy shortage, renewable energy sources and energy conservation are emphasized all over the world. The role of power electronics in energy saving and development of renewable energy systems is significant. Power electronics is applied in wind, solar, fuel cell, and micro turbine energy systems for the energy conversion and control. The use of power electronics introduces an energy saving potential in such applications as motors, lighting, home appliances, and consumer electronics. Despite the advantages of power converters, their penetration into the market requires that they have a set of characteristics such as high reliability and power density, cost effectiveness, and low weight, which are dictated by the emerging applications. In association with the increasing requirements, the design of the power converter is becoming more complicated, and thus, a multidisciplinary approach to the modelling of the converter is required. In this doctoral dissertation, methods and models are developed for the design of a multilevel power converter and the analysis of the related electromagnetic, thermal, and reliability issues. The focus is on the design of the main circuit. The electromagnetic model of the laminated busbar system and the IGBT modules is established with the aim of minimizing the stray inductance of the commutation loops that degrade the converter power capability. The circular busbar system is proposed to achieve equal current sharing among parallel-connected devices and implemented in the non-destructive test set-up. In addition to the electromagnetic model, a thermal model of the laminated busbar system is developed based on a lumped parameter thermal model. The temperature and temperature-dependent power losses of the busbars are estimated by the proposed algorithm. The Joule losses produced by non-sinusoidal currents flowing through the busbars in the converter are estimated taking into account the skin and proximity effects, which have a strong influence on the AC resistance of the busbars. The lifetime estimation algorithm was implemented to investigate the influence of the cooling solution on the reliability of the IGBT modules. As efficient cooling solutions have a low thermal inertia, they cause excessive temperature cycling of the IGBTs. Thus, a reliability analysis is required when selecting the cooling solutions for a particular application. The control of the cooling solution based on the use of a heat flux sensor is proposed to reduce the amplitude of the temperature cycles. The developed methods and models are verified experimentally by a laboratory prototype.

Spectrally Tuned Lanthanide Photoluminescence for Point-of-Care Testing

Point-of-care (POC) –diagnostics is a field with rapidly growing market share. As these applications become more widely used, there is an increasing pressure to improve their performance to match the one of a central laboratory tests. Lanthanide luminescence has been widely utilized in diagnostics because of the numerous advantages gained by the utilization of time-resolved or anti-Stokes detection. So far the use of lanthanide labels in POC has been scarce due to limitations set by the instrumentation required for their detection and the shortcomings, e.g. low brightness, of these labels. Along with the advances in the research of lanthanide luminescence, and in the field of semiconductors, these materials are becoming a feasible alternative for the signal generation also in the future POC assays. The aim of this thesis was to explore ways of utilizing time-resolved detection or anti-Stokes detection in POC applications. The long-lived fluorescence for the time-resolved measurement can be produced with lanthanide chelates. The ultraviolet (UV) excitation required by these chelates is cumbersome to produce with POC compatible fluorescence readers. In this thesis the use of a novel light-harvesting ligand was studied. This molecule can be used to excite Eu(III)-ions at wavelengths extending up to visible part of the spectrum. An enhancement solution based on this ligand showed a good performance in a proof-of-concept -bioaffinity assay and produced a bright signal upon 365 nm excitation thanks to the high molar absorptivity of the chelate. These features are crucial when developing miniaturized readers for the time-resolved detection of fluorescence. Upconverting phosphors (UCPs) were studied as an internal light source in glucose-sensing dry chemistry test strips and ways of utilizing their various emission wavelengths and near-infrared excitation were explored. The use of nanosized NaYF :Yb3+,Tm3+-particles enabled the replacement of an external UV-light source with a NIR-laser and gave an additional degree of freedom in the optical setup of the detector instrument. The new method enabled a blood glucose measurement with results comparable to a current standard method of measuring reflectance. Microsized visible emitting UCPs were used in a similar manner, but with a broad absorbing indicator compound filtering the excitation and emission wavelengths of the UCP. This approach resulted in a novel way of benefitting from the non-linear relationship between the excitation power and emission intensity of the UCPs, and enabled the amplification of the signal response from the indicator dye.