850 resultados para sociology of innovation
Resumo:
The analysis of clusters has attracted considerable interest over the last few decades. The articulation of clusters into complex networks and systems of innovation -- generally known as regional innovation systems -- has, in particular, been associated with the delivery of greater innovation and growth. However, despite the growing economic and policy relevance of clusters, little systematic research has been conducted into their association with other factors promoting innovation and economic growth. This article addresses this issue by looking at the relationship between innovation and economic growth in 152 regions of Europe during the period between 1995 and 2006. Using an econometric model with a static and a dynamic dimension, the results of the analysis highlight that: a) regional growth through innovation in Europe is fundamentally connected to the presence of an adequate socioeconomic environment and, in particular, to the existence of a well-trained and educated pool of workers; b) the presence of clusters matters for regional growth, but only in combination with a good ‘social filter’, and this association wanes in time; c) more traditional R&D variables have a weak initial connection to economic development, but this connection increases over time and, is, once again, contingent on the existence of adequate socioeconomic conditions.
Resumo:
Strategic Knowledge: While entrepreneurship may occur as a natural result of personal drive, it occurs most often, most robustly and is most sustainable in an environment designed to encourage it. Potential entrepreneurs become active entrepreneurs when the conditions are most supportive of their commercial opportunities and their business thus helping channel the two key qualities they exhibit as individuals obsessed maniacs and clairvoyant oracles (Carayannis, GWU Lectures, 2000-2005) and (Carayannis et at, 2003a) towards the generation of sustainable wealth. So far, entrepreneurial scholars who turn into intellectual venture capitalists by founding knowledge-driven companies remain one of the least explored specie in the territory of entrepreneurship. GloCal: The increasing engagement of firms within global knowledge and production networks and their ability to source knowledge globally as well as locally (GloCally), for the development of innovation capacities will shape the future of UK's knowledge resources and its role in the global economy. Practices such as off-shoring R&D activities are widely adopted, creating challenging, and not very well understood, issues related to cross-country and inter-firm knowledge and technology flows. We seek to address the internationalisation and networking of research and innovation activities, including the roles and strategies of enterprises, universities, research centres, governments in a cross-country and inter-sectoral way, to assess the impact and the implications for sustaining and enhancing the competitiveness of UK firms and other British knowledge producers and users.
Resumo:
The Indian petroleum industry is passing through a very dynamic business environment due to the liberalisation of many government policies, vertical integration among organisations and the presence of multinational companies. This caused a competitive environment among the organisations in the Indian petroleum industry in the public sector. Effective project management for developing new infrastructures and maintaining the existing facilities has been considered one of the means for remaining competitive in this business environment. However, present project management practices suffer from many shortcomings, as time, cost and quality non-achievements are part and parcel of almost every project. This study focuses on identifying the issues in managing projects of the organisation in the Indian petroleum sector with the involvement of the executives in a workshop environment. This also suggests some remedial measures for resolving those issues through identifying critical success factors and enablers. The enablers not only resolve the present issues but also ensure superior performance. These are analysed in a quantitative framework to derive improvement measures in project management practices.
Resumo:
In this article I synthesise research and theory that advance our understanding of creativity and innovation implementation in groups at work. It is suggested that creativity occurs primarily at the early stages of innovation processes with innovation implementation later. The influences of task characteristics, group knowledge diversity and skill, external demands, integrating group processes and intragroup safety are explored. Creativity, it is proposed, is hindered whereas perceived threat, uncertainty or other high levels of demands aid the implementation of innovation. Diversity of knowledge and skills is a powerful predictor of innovation, but integrating group processes and competencies are needed to enable the fruits of this diversity to be harvested. The implications for theory and practice are also explored.
Resumo:
Driven by the assumption that multidisciplinarity contributes positively to team outcomes teams are often deliberately staffed such that they comprise multiple disciplines. However, the diversity literature suggests that multidisciplinarity may not always benefit a team. This study departs from the notion of a linear, positive effect of multidisciplinarity and tests its contingency on the quality of team processes. It was assumed that multidisciplinarity only contributes to team outcomes if the quality of team processes is high. This hypothesis was tested in two independent samples of health care workers (N = 66 and N = 95 teams), using team innovation as the outcome variable. Results support the hypothesis for the quality of innovation, rather than the number of innovations introduced by the teams.
Resumo:
This paper analyses the determinants of the export propensity of UK small and medium-sized enterprises (SMEs) based on the 2004 Annual Small Business Survey. Particular emphasis is placed upon the relationship between innovation activities (distinguishing product from process innovation) and export performance. In general the data suggest that some 17 per cent of firms within this group sell outside the UK. Businesses that export are also characterized by high levels of innovation activity (43 per cent of exporters innovate in products, 27 per cent innovate in process and 21 per cent innovate in both). When considering product and process innovation independently we find that both impact positively on the decision to export. However, once we consider the interdependence between both innovation activities, we find no robust evidence that process innovation increases the probability to export beyond product innovation.
Resumo:
This thesis explores the innovative capacity of voluntary organizations in the field of the personal social services. It commences with a full literature review, which concludes that the wealth of research upon innovation in the organization studies field has not addressed this topic, whilst the specialist literatures upon voluntary organizations and upon the personal social services have neglected the study of innovation. The research contained in this thesis is intended to right this neglect and to integrate lessons from both fields. It combines a survey of the innovative activity of voluntary organizations in three localities with cross-sectional case studies of innovative, developmental and traditional organizations. The research concludes that innovation is an important, but not integral, characteristic of voluntary organizations. It develops a contingent model of this innovative capacity of voluntary organizations, which stresses the role of external environmental and institutional forces in shaping and releasing this capacity. It concludes by considering the contribution of this model both to organization studies and to the study of voluntary organizations.
Resumo:
The study addresses the introduction of an innovation of new technology into a bureaucratic profession. The organisational setting is that of local authority secondary schools at a time at which microcomputers were being introduced in both the organisational core (for teaching) and its periphery (school administration). The research studies innovation-adopting organisations within their sectoral context; key actors influencing the innovation are identified at the levels of central government, local government and schools.A review of the literature on new technology and innovation (including educational innovation), and on schools as organisations in a changing environment leads to the development of the conceptual framework of the study using a resource dependency model within a cycle of the acquisition, allocation and utilisation of financial, physical and intangible resources. The research methodology is longitudinal and draws from both positivist and interpretive traditions. lt includes an initial census of the two hundred secondary schools in four local education authorities, a final survey of the same population, and four case studies, using both interview methods and documentation. Two modes of innovation are discerned. In respect of administrative use a rationalising, controlling mode is identified, with local education authorities developing standardised computer-assisted administrative systems for use in schools. In respect of curricular use, in contrast, teachers have been able to maintain an indeterminate occupational knowledge base, derived from an ideology of professionalism in respect of the classroom use of the technology. The mode of innovation in respect of curricular use has been one of learning and enabling. The resourcing policies of central and local government agencies affect the extent of use of the technology for teaching purposes, but the way in which it is used is determined within individual schools, where staff with relevant technical expertise significantly affect the course of the innovation.
Resumo:
This thesis involves the secondary data of 1806 innovative manufacturing firms derived from the database of 2nd Taiwanese Innovation Survey. Three topics are researched. The first topic investigates the innovation value chain (IVC) in Taiwanese manufacturing firms. Previous IVC studies are all done in developed countries such as UK, Ireland, Northern Ireland and Switzerland, and it leaves the gap of those non-developed countries. The result shows the overall knowledge sourcing pattern of Taiwanese manufacturing firms presenting a complementary relationship which is consistent to the previous IVC studies. The main innovation input is still derived from internal R&D which suggests more utilisation of external knowledge may boost innovation outcome. Product innovation does enhance firm growth while process innovation reduces a firm’s productivity. The second topic uses the lens of IVC to investigate the difference of the innovation process from knowledge linkages to value added between high-tech and low- tech sectors. The findings indicate (1) there are significant differences in the IVC between high- and low-tech sectors, however these are defined; (2) how you define ‘sector’ matters i.e. the nature of the high-tech and low-tech differences varies depending on whether the technology definition is carried out at the industry or firm level; and (3) the high uncertainty of innovation cause the difficulty to predict firm performance especially for those firms with high intensity of innovation. The third topic investigates the innovation-exporting relationship and explores the determinants of export performance. Product innovation enhances export performance once a firm enters international markets while process innovation affects negatively on a firm’s likelihood of being an exporter. Furthermore, IP protection is found to affect directly export performance positively.
Resumo:
In the global economy, innovation is one of the most important competitive assets for companies willing to compete in international markets. As competition moves from standardised products to customised ones, depending on each specific market needs, economies of scale are not anymore the only winning strategy. Innovation requires firms to establish processes to acquire and absorb new knowledge, leading to the recent theory of Open Innovation. Knowledge sharing and acquisition happens when firms are embedded in networks with other firms, university, institutions and many other economic actors. Several typologies of innovation and firm networks have been identified, with various geographical spans. One of the first being modelled was the Industrial Cluster (or in Italian Distretto Industriale) which was for long considered the benchmark for innovation and economic development. Other kind of networks have been modelled since the late 1970s; Regional Innovation Systems represent one of the latest and more diffuse model of innovation networks, specifically introduced to combine local networks and the global economy. This model was qualitatively exploited since its introduction, but, together with National Innovation Systems, is among the most inspiring for policy makers and is often cited by them, not always properly. The aim of this research is to setup an econometric model describing Regional Innovation Systems, becoming one the first attempts to test and enhance this theory with a quantitative approach. A dataset of 104 secondary and primary data from European regions was built in order to run a multiple linear regression, testing if Regional Innovation Systems are really correlated to regional innovation and regional innovation in cooperation with foreign partners. Furthermore, an exploratory multiple linear regression was performed to verify which variables, among those describing a Regional Innovation Systems, are the most significant for innovating, alone or with foreign partners. Furthermore, the effectiveness of present innovation policies has been tested based on the findings of the econometric model. The developed model confirmed the role of Regional Innovation Systems for creating innovation even in cooperation with international partners: this represents one of the firsts quantitative confirmation of a theory previously based on qualitative models only. Furthermore the results of this model confirmed a minor influence of National Innovation Systems: comparing the analysis of existing innovation policies, both at regional and national level, to our findings, emerged the need for potential a pivotal change in the direction currently followed by policy makers. Last, while confirming the role of the presence a learning environment in a region and the catalyst role of regional administration, this research offers a potential new perspective for the whole private sector in creating a Regional Innovation System.
Resumo:
Service innovations in retailing have the potential to benefit consumers as well as retailers. This research models key factors associated with the trial and continuous use of a specific self-service technology (SST), the personal shopping assistant (PSA), and estimates retailer benefits from implementing that innovation. Based on theoretical insights from prior SST studies, diffusion of innovation literature, and the technology acceptance model (TAM), this study develops specific hypotheses and tests them on a sample of 104 actual users of the PSA and 345 nonusers who shopped at the retail store offering the PSA device. Results indicate that factors affecting initial trial are different from those affecting continuous use. More specifically, consumers' trust toward the retailer, novelty seeking, and market mavenism are positively related to trial, while technology anxiety hinders the likelihood of trying the PSA. Perceived ease of use of the device positively impacts continuous use while consumers' need for interaction in shopping environments reduces the likelihood of continuous use. Importantly, there is evidence on retailer benefits from introducing the innovation since consumers using the PSA tend to spend more during each shopping trip. However, given the high costs of technology, the payback period for recovery of investments in innovation depends largely upon continued use of the innovation by consumers. Important implications are provided for retailers considering investments in new in-store service innovations. Incorporation of technology within physical stores affords opportunities for the retailer to reduce costs, while enhancing service provided to consumers. Therefore, service innovations in retailing have the potential to benefit consumers as well as retailers. This research models key factors associated with the trial and continuous use of a specific SST in the retail context, the PSA, and estimates retailer benefits from implementing that innovation. In so doing, the study contributes to the nascent area of research on SSTs in the retail sector. Based on theoretical insights from prior SST studies, diffusion of innovation literature, and the TAM, this study develops specific hypotheses regarding the (1) antecedent effects of technological anxiety, novelty seeking, market mavenism, and trust in the retailer on trial of the service innovation; (2) the effects of ease of use, perceived waiting time, and need for interaction on continuous use of the innovation; and (3) the effect of use of innovation on consumer spending at the store. The hypotheses were tested on a sample of 104 actual users of the PSA and 345 nonusers who shopped at the retail store offering the PSA device, one of the early adopters of PSA in Germany. Data were analyzed using logistic regression (antecedents of trial), multiple regression (antecedents of continuous use), and propensity score matching (assessing retailer benefits). Results indicate that factors affecting initial trial are different from those affecting continuous use. More specifically, consumers' trust toward the retailer, novelty seeking, and market mavenism are positively related to trial, while technology anxiety hinders the likelihood of trying the PSA. Perceived ease of use of the device positively impacts continuous use, while consumers' need for interaction in shopping environments reduces the likelihood of continuous use. Importantly, there is evidence on retailer benefits from introducing the innovation since consumers using the PSA tend to spend more during each shopping trip. However, given the high costs of technology, the payback period for recovery of investments in innovation depends largely upon continued use of the innovation by consumers. Important implications are provided for retailers considering investments in new in-store service innovations. The study contributes to the literature through its (1) simultaneous examination of antecedents of trial and continuous usage of a specific SST, (2) the demonstration of economic benefits of SST introduction for the retailer, and (3) contribution to the stream of research on service innovation, as against product innovation.
Resumo:
From a Service-Dominant Logic (S-DL) perspective, employees constitute operant resources that firms can draw to enhance the outcomes of innovation efforts. While research acknowledges that frontline employees (FLEs) constitute, through service encounters, a key interface for the transfer of valuable external knowledge into the firm, the range of potential benefits derived from FLE-driven innovation deserves more investigation. Using a sample of knowledge intensive business services firms (KIBS), this study examines how the collaboration with FLEs along the new service development (NSD) process, namely FLE co-creation, impacts on service innovation performance following two routes of different effects. Partial least squares structural equation modeling (PLS-SEM) results indicate that FLE co-creation benefits the NS success among FLEs and firm’s customers, the constituents of the resources route. FLE co-creation also has a positive effect on the NSD speed, which in turn enhances the NS quality. NSD speed and NS quality integrate the operational route, which proves to be the most effective path to impact the NS market performance. Accordingly, KIBS managers must value their FLEs as essential partners to achieve successful innovation from an internal and external perspective, and develop the appropriate mechanisms to guarantee their effective involvement along the NSD process.
Resumo:
Purpose: A case study is presented concerning a gamified awards system designed to encourage software users to explore a suite of tools, and to share their expertise level in profile pages. Majestic is a high-tech business based in the West Midlands (UK) w hich offers a Link Intelligence database using a Software as a Service (SaaS) business model. Customers leverage the database for tasks including Search Engine Optimisation (SEO) by using a suite of web-based tools. Getting to know all the tools and how they can be deployed to good effect represents a considerable learning challenge, and Majestic were aware that. Design/methodology/approach: We present the development of Majestic Awards as a case study highlighting the most important design decisions. Then we reflect on the development process as an example of innovation adoption, thereby identifying resources and cu ltura l factors which were critical in ensuring the success of the project. Findings: The gamified awards system makes learning the tools an enjoyable, explorative experience. Success factors included identifying a clear business goal, the process/ project f it, senior management buy in, and identifying the knowledge and resources to resolve t echnical issues. Originality/value: Prior to gamification of the system, only the most expert users regu larly utilized all the tools. The user base is now more knowl edgable about the system and some users choose to use the system to publicize their expertise.
Resumo:
Small and medium-sized enterprises (SMEs) are considered to be the driving engine for employment growth, source of innovation and technological progress. Moreover, the success of small exporters is critical for economic growth and is considered as an important development stage for many SMEs. However, their competitive advantage lies within the firm’s ability to innovate. This thesis contributes to the above literature by examining two main factors believed to promote firm growth namely ‘exporting’ and ‘innovation’ activities. Growing interests on the relationship between exporting, innovation and growth have recently been tackled. However, there remains a gap in literature on the relationship between exporting, innovation and firm growth for SMEs in emerging economies. Previous studies are conducted in developed counties such as UK, Ireland, USA, Germany, and Switzerland, which leaves the gap for those developing countries. Thus, this thesis addresses the gap by examining the importance of innovation and exporting activities in the growth of SMEs in Egypt. It is also the researcher’s intent to recognise the unique contribution of innovation on firm exporting activities covering all sectors. gypt, one of the countries that were tremendously affected by the so-called ‘Arab Spring revolution’, is suffering from slow economic growth, high unemployment and poverty rate. Thus, the government must ensure economic growth and job creation. Programmes to encourage and develop SMEs should be part of inclusive growth strategy. Meanwhile, exporting is regarded as a key factor to help the economy recover from recession and stimulate economic growth. On the other hand, innovation leads to better performance in terms of growth, exporting and productivity. Therefore, SMEs and their exporting and innovation activities should be an integral part of any recovery and growth strategy for the economy. Moreover, Egypt is suffering from the so-called ‘Missing Middle’, which is problematic as medium firms tend to provide better employment growth and productivity. Therefore, more light is to shed on the importance of exporting and innovation in the growth of firms. The research design was quantitative in nature, testing the proposed hypotheses. The study was conducted in 2013 based on questionnaires of 406 Egyptians SMEs. The results of the empirical study suggest that both exporting and innovation activities are important in firm growth. However, the results show that, after controlling for endogeneity, innovation does not affect exporting activities in SMEs.
Resumo:
Small and medium-sized enterprises (SMEs) are considered to be the driving engine for employment growth, source of innovation and technological progress. Moreover, the success of small exporters is critical for economic growth and is considered as an important development stage for many SMEs. However, their competitive advantage lies within the firm’s ability to innovate. This thesis contributes to the above literature by examining two main factors believed to promote firm growth namely ‘exporting’ and ‘innovation’ activities. Growing interests on the relationship between exporting, innovation and growth have recently been tackled. However, there remains a gap in literature on the relationship between exporting, innovation and firm growth for SMEs in emerging economies. Previous studies are conducted in developed counties such as UK, Ireland, USA, Germany, and Switzerland, which leaves the gap for those developing countries. Thus, this thesis addresses the gap by examining the importance of innovation and exporting activities in the growth of SMEs in Egypt. It is also the researcher’s intent to recognise the unique contribution of innovation on firm exporting activities covering all sectors. Egypt, one of the countries that were tremendously affected by the so-called ‘Arab Spring revolution’, is suffering from slow economic growth, high unemployment and poverty rate. Thus, the government must ensure economic growth and job creation. Programmes to encourage and develop SMEs should be part of inclusive growth strategy. Meanwhile, exporting is regarded as a key factor to help the economy recover from recession and stimulate economic growth. On the other hand, innovation leads to better performance in terms of growth, exporting and productivity. Therefore, SMEs and their exporting and innovation activities should be an integral part of any recovery and growth strategy for the economy. Moreover, Egypt is suffering from the so-called ‘Missing Middle’, which is problematic as medium firms tend to provide better employment growth and productivity. Therefore, more light is to shed on the importance of exporting and innovation in the growth of firms. The research design was quantitative in nature, testing the proposed hypotheses. The study was conducted in 2013 based on questionnaires of 406 Egyptians SMEs. The results of the empirical study suggest that both exporting and innovation activities are important in firm growth. However, the results show that, after controlling for endogeneity, innovation does not affect exporting activities in SMEs.