Estudo comparativo de restos fósseis e recentes de Amphisbaenia: abordagens filogenéticas, paleoecológicas, paleobiogeográficas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Trauma traqueal associado à fratura mandibular: relato de caso

Introduction: The mandibular injuries account for about 20% to 50% of cases of facial fractures. Some consider the jaw the second most commonly fractured bone of the skull, and is the only mobile bone of the facial framework, which results in decreased stability compared to the trauma. When one takes into account the degree of airway obstruction in patients with facial fractures, the problem becomes much more serious since it is one of the most troubling complications of trauma. Objective: the relevance of the topic is aimed to report a case of a patient victim of mandibular fracture associated with trauma to the trachea. Case report: Case report: Patient 24 years old patient with tracheal trauma concomitant mandibular fracture surgically treated in conjunction with the thoracic surgeon. After 5 months postoperatively, the patient is in good condition general, no complaints. Final comments: This form is observed that the key to proper treatment of tracheal trauma associated with facial fractures is the knowledge of the type of injury, and an accurate diagnosis multidisciplinary.

Reconstrução de maxila severamente atrófica via enxerto ósseo autógeno de calota craniana: descrição de técnica

Bone reconstructions are traditionally conducted with autogenous grafts harvested from intra- or extra-oral donor sites to reestablish the lost bone volume for further implant-prosthetic rehabilitation. The calvarial bone has been studied as an excellent donor site in large atrophic situations, presenting low resorption rates, as well as complications and minimal morbidity. The hospitalization time is short, with low pain levels, short functional limitations, and invisible scars. The skull microarchitecture is predominantly cortical in the presence of growth factors that demonstrate their osteogenic, osteoinductive, and osteoconductive abilities resulting in low resorption rate and high predictability when compared to the iliac crest. Dural lacerations, extra and subdural bleeding, cerebrospinal fluid leakage, and brain damage have been minimized due to the development of surgical technique. The delimitation of diploe, preserving the internal skull cortex before osteotomy at the donor made it possible to reduce accidents and complications. The aim of this paper is to show a technical and to discuss aspects of the use of calvarial bone in the reconstruction of severely atrophic maxilla for oral rehabilitation with osseointegrated implants.

Particularities in the technique of calvaria graft

Calvaria grafts provide good bone quantity for the reconstruction of the atrophic maxilla, and have lower morbidity and resorption rates when compared to iliac crest. The aim of this paper is to present the technique for obtaining a graft of the skull. Initially, the depth of the osteotomy is determined by a manually conducted bur, which establishes the limits of the structures of the skull (outer table, diploe and inner table), making the removal of bone blocks easier and safer. Thus, osteotomies of the blocks are made with greater security, avoiding the complications inherent to surgical technique. The case that will be presented it is from a male patient of 65 years who refused to submit to the iliac crest graft, opting for the calvaria, despite being bald, that is a contraindication for this treatment modality. A delicate suture associated with placement of titanium mesh to maintain the conformation of the patient's skull in the region of the bone defect, created after removal of the graft, provided a good cosmetic result at the donor site. The use of titanium mesh for re-anatomization of bone defects created in the grafts is well indicated for bald patients.

Descrição anatômica das estruturas osteoarticulares do esqueleto axial do tatu-galinha (Dasypus novemcinctus Linnaeus, 1758) por meio da radiografia e tomografia computadorizada

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo comparativo do desempenho de diferentes membranas oclusivas de Látex Natural no reparo ósseo

Introduction: In dentistry, alveolar bone resorption is a limiting factor in the well being of individuals directly interfering in the stomatognathic system, causing problems in the context of overall health. Aiming to promote biological methods that can stimulate bone regeneration, several biomimetic strategies have been developed by the use of diverse materials possible to the bone matrix, culminating in the development of techniques that promote such repair. Objective: This work is a comparative study of the performance of films made with latex as occlusive membrane for Guided Bone Regeneration (GBR) procedure in three preparations: Latex preserved in ammonia, produced by Latex rubber clones IAN873 and PR255 polymerized immediately after collection and without use ammonia as a preservative. Methods: Sixty Wistar rats were randomly divided into 4 groups of 15 animals in which bone defects of critical size (8mm diameter) were made surgically in the skull. Group A was treated by GBR through the membrane latex preserved with ammonia, Group B received the membrane made of latex from IAN873, Group C, the membrane clone PR255 and group D was not treated by GBR. After a period of 7, 15 and 50 days, 5 animals from each group were euthanized, and specimens containing bone defect collected for microscopic examination (descriptive histology and histomorphometry). Results: The results showed that after 50 days there was bone formation in higher proportions in group D (p <0.05, ANOVA followed by Tukey), suggesting that further experiments should be conducted to conclude about the presence of ammonia and the influence of kind of rubber. Conclusion: GOR is a procedure proven effective in the treatment of bone defects. Therefore, further experiments should be conducted to reach a conclusion regarding the presence of ammonia in the latex composition for the manufacture of membranes, as well as the difference induced by the species of rubber.

Comparative analysis of the cranial osteology and evolutionary traits of micrastur gilvicollis, micrastur ruficollis and micrastur semitorquatus (aves: falconiformes)

The cranial osteology of Micrastur gilvicollis (Vieillot, 1817), Micrastur ruficollis (Vieillot, 1817) and Micrastur semitorquatus (Vieillot, 1817) is comparatively and meticulously described to characterize each of the species and to determine which traits the species have in common and which are distinct. These traits will be used a posteriori for phylogenetic analysis. Our results indicate that M. gilvicollis and M. ruficollis are closely related, as they share a large number of traits, including a lacrimal bone with a distal portion that is approximately half as long as the proximal portion and a parasphenoid rostrum that covers 50% of the distance between the occipital condyle and pterygoid. Similarly, M. gilvicollis and M. semitorquatus both have a partially fused craniofacial flexion zone. In both M. ruficollis and M. semitorquatus, the symphyseal region of the mandible is 1/5 the total length of the mandible. The diagnostic traits for each of these species are as follows: a) in M. gilvicollis, the interorbital distance is 1/3 the length of the parietal, and the zygomatic process stretches 1/5 of the distance from the orbital arch to the jugal arch; b) in M. ruficollis, the interorbital distance is 2/5 of the length of the parietal and the zygomatic process extends 1/4 of the distance from the orbital arch to the jugal arch; and c) in M. semitorquatus, the interorbital distance is 3/7 the length of the parietal and the distal portion of the lacrimal is 1/3 the length of the proximal portion. Among the three species, M. gilvicolis and M. ruficollis share the most traits, which leads us to infer that these species are more closely related to one another than they are to M. semitorquatus. Phylogenetic analysis performed a posteriori may confirm the relationship between these three species.

Osteologia craniana comparada de Caracara cheriway (Jacquin, 1784) e Caracara plancus (Miller, 1777) (AVES: FALCONIDAE)

The Caracara genus (Aves: Falconidae) is composed by species C. cheriway, ("Crested Caracara"), and C. plancus (Southern Caracara). This study aimed to describe in detail and compared the cranial osteology of C. cheriway and C. plancus, identifying osteological cranial characters for a future systematic work. The two common characters of Caracara species are: the projection of rostro parasphenoid reaches 50% of the distance from the occipital condyle to the pterygoid; the upper maxilla has about 4/9 of the total length of theskull, the symphysial portion of mandible occupies about 1/7 of its total length, the proximal portion of lacrimal bone ends in a rounded shape and has about 1/4 of the width of the distal portion. The unique characters of C. cheriway are: the interorbital width is about 1/2 of the parietal region, shows a frontal bone prominence; presence of lacrimal process of frontal bone; the proximal portion of the lacrimal bone reaches 1/5 of the distance from the orbital arc to the jugal bone; the distance between the distal portions of two lacrimal bones reach 5/6 of the parietal width, the ratio between the interorbital diameter and parietal region ranges from 2 times; the zygomatic process occupies about 40% of the distance between its origin in the skull and jugal bone. The unique characters of C. plancus are: the interorbital width is approximately 4/7 of the parietal width; show a rostral medial concavity; the proximal portion of the lacrimal bone is about 1/4 of the width of the distal; the proximal portion of the lacrimal bone reaches 1/7 of the distance from the orbital arc to the jugal bone; the distance between the distal portions of two lacrimal bones reaches 6/7 of the width parietal one; the ratio between the interorbital diameter and parietal region varies 1, 75 times, the zygomatic process occupies about 35% of the distance between its origin in the skull and jugal bone.

Análise molecular de pacientes com holoprosencefalia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência da miliamperagem sobre a qualidade do diagnóstico das fraturas radiculares por meio de tomografia computadorizada de feixe cônico: estudo in vitro

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Genetic isolation and morphological divergence of Black Sea bottlenose dolphins

The Black Sea is a semi-enclosed body of water that differs from the adjacent Mediterranean Sea in terms of its biodiversity, oceanographical and ecological characteristics. There is growing international concern about pollution in the Black Sea and other anthropogenic threats to its fauna. The bottlenose dolphin (Tursiops truncatus) is one of three species of cetaceans living in the Azov-Black Sea basin. Despite considerable research on bottlenose dolphins elsewhere, the extent of human impacts on the Black Sea populations is unknown. Previous attempts to award special conservation status to Black Sea cetaceans have failed specifically because policy makers have viewed their ecological and evolutionary uniqueness as equivocal. This study assessed divergence between Black Sea, Mediterranean Sea and Atlantic Ocean bottlenose dolphins for 26 cranial measurements (n = 75 adult bottlenose dolphin skulls) and mitochondrial DNA (n = 99 individuals). Black Sea bottlenose dolphins are smaller than those in the Mediterranean, and possess a uniquely shaped skull. As in a previous study, we found the Black Sea population to be genetically distinct, with relatively low levels of mtDNA diversity. Population genetic models suggest that Black Sea bottlenose dolphins have so little gene flow with the Mediterranean due to historical isolation that they should be managed separately.

A Porpoise, Australophocaena dioptrica, Previously Identified As Phocoena spinipinnis, From Heard Island

Guiler, Burton and Gales (1987) reported a cranium (Tasmanian Museum No. A141 1) they identified as belonging to Burmeister’s porpoise, Phocoena spinipinnis Burmeister, 1865 from Heard Island (53°S 73°30’E). They noted that P. spinipinnis was previously known only from the cold-temperate coastal waters of South America and claimed that this cranium was evidence that the species has a much wider distribution than previously known. We have examined the photographs and details of their specimen and re-identify it here as Australophocaena dioptrica (Lahille, 1912) (family Phocoenidae). Barnes (1985) listed several features that distinguish the skulls of species within the subfamily Phocoenoidinae (including A. dioptrica) from those species within the Phocoeninae (including Phocoena spp.). Features that distinguish A. dioptrica from P. spinipinnis, dearly visible in the published photographs of the cranium from Heard Island, include: a relatively small, oval-shaped temporal fossa; an elevated, high-vaulted braincase that slopes abruptly onto the narial region; relatively large, high and convex premaxillary bosses; dorso-ventrally expanded zygomatic process of the squamosal; short and antetoposteriorly expanded postorbital process of the fronds; and maxillae extendmg nearly to the dorsal margin of the supraoccipital on the top of the skull. In all these features, the Heard Island specimen conforms with those of A. dioptrica. Crania of A. dioptrica have been illustrated by Hamilton (1941), Norris and McFarland (1958), Brownell (1975), Fordyce et al. (1984), and Barnes (1985). Crania of P. spinipinnis have been illustrated by Norris and McFarland (1958) and Brownell and Praderi (1984).

Geographic Variation in Sea Otters, Enhydra lutris

Univariate and multivariate analyses of 20 skull characters of 304 adult sea otters from throughout the geographic range strongly suggest that three subspecies should be recognized. The nominate form, Enhydra lutris lutris, occurs from the Kuril Islands north to the Commander Islands in the western Pacific Ocean. Individuals of E. l. lutris are characterized by large size and wide skulls with short nasal bones. E. 1. nereis is found along the California coast and off San Nicolas Island, where the species recently has been reintroduced from coastal California. Specimens of E. 1. nereis have narrow skulls with a long rostrum and small teeth, and usually lack the characteristic notch in the postorbital region found in most specimens of the other two subspecies. A new subspecies described by Don E. Wilson in this report, occurs throughout the Aleutian Islands and southward in the eastern Pacific to Washington. Specimens of the new subspecies are intermediate in size in most, but not all, characters and have longer mandibles than either of the other two subspecies

Taxonomy of the Common Dolphins of the Eastern Pacific Ocean

Delphinus bairdii Dall is a species of dolphin distinct from D. delphis Linnaeus, with which it has usually been synonymized. D. bairdii has a longer rostrum relative to the zygomatic width of the skull; the ratio of these measurements falls at 1.55 or above for bairdii and 1.53 and below for delphis. In the eastern Pacific Ocean, D. bairdii is found in the Gulf of California and along the west coast of Baja California, Mexico; D. delphis is presently found in the waters off California. Until approximately the beginning of the present century, bairdii occurred farther north in the eastern Pacific Ocean, at least to the Monterey Bay area of California. Restriction of bairdii to more southerly waters, probably as an indirect result of a change in water temperature, may have permitted delphis to move into inshore Californian waters. The Pacific population of D. delphis has a somewhat shorter rostrum than the Atlantic population, and is perhaps subspecifically different. A thorough analysis of the entire genus Delphinus is needed before the relationship of all the populations can be understood and names properly applied.

Cetacean Notes. I. Sei and Rorqual Whales on the Mississippi Coast, a Correction. II. A Dwarf Sperm Whale in Mississippi Sound and Its Helminth Parasites

I. Gunter and Christmas (1973) described the events leading to the stranding of a baleen whale on Ship Island, Mississippi, in 1968, giving the species as Balaenopteru physalus, the Rorqual. Unfortunately the identification was in error, but fortunately good photographs were shown. The underside of the tail was a splotched white, but there was no black margin. The specimen also had fewer throat and belly grooves than the Rorqual, as a comparison with True’s (1904) photograph shows. Dr. James Mead (in litt.) pointed out that the animal was a Sei Whale, Balaenoptera borealis. This remains a new Mississippi record and according to Lowery’s (1974) count, it is the fifth specimen reported from the Gulf of Mexico. The stranding of a sixth Sei Whale on Anclote Keys in the Gulf, west of Tarpon Springs, Florida on 30 May 1974, was reported in the newspapers and by the Smithsonian Institution (1974). II. Gunter, Hubbs and Beal (1955) gave measurements on a Pygmy Sperm Whale, Kogia breviceps, which stranded on Mustang Island on the Texas coast and commented upon the recorded variations of proportional measurements in this species. Then according to Raun, Hoese and Moseley (1970) these questions were resolved by Handley (1966), who showed that a second species, Kogia simus, the Dwarf Sperm Whale, is also present in the western North Atlantic. Handley’s argument is based on skull comparisons and it seems to be rather indubitable. According to Raun et al. (op. cit.), the stranding of a species of Kogia on Galveston Island recorded by Caldwell, Ingles and Siebenaler (1960) was K. simus. They also say that Caldwell (in litt.) had previously come to the same conclusion. Caldwell et al. also recorded another specimen from Destin, Florida, which is now considered to have been a specimen of simus. The known status of these two little sperm whales in the Gulf is summarized by Lowery (op. cit.).