Electricity use in the commercial kitchen

Academic and industrial literature concerning the energy consumption of commercial kitchens is scarce. Electricity consumption data were collected from distribution board current transformers in a sample of fourteen UK public house restaurants. This was set up to identify patterns of appliance use as well as to assess the total energy consumption of these establishments. The electricity consumption in the selected commercial kitchens was significantly higher than current literature estimates. On average, 63% of the premises electricity consumption was attributed to the catering activity. Key appliances that contributed to the samples average electricity consumption were identified as refrigeration (70 kwh, 41%), fryers (11 kwh, 13%), combi-ovens (35 kwh, 12%) bain maries (27 kwh, 9%) and grills (37kwh, 12%). Behavioral factors and poor maintenance were identified as major contributors to excessive electricity usage with potential savings of 70% and 45% respectively. Initiatives are required to influence operator behavior, such as the expansion of mandatory energy labeling, improved feedback information and the use of behavior change campaigns. Strict maintenance protocols and more appropriate sizing of refrigeration would be of great benefit to energy reduction.

Analysis and modeling of active occupancy of the residential sector in Spain: an indicator of residential electricity consumption

The growing energy consumption in the residential sector represents about 30% of global demand. This calls for Demand Side Management solutions propelling change in behaviors of end consumers, with the aim to reduce overall consumption as well as shift it to periods in which demand is lower and where the cost of generating energy is lower. Demand Side Management solutions require detailed knowledge about the patterns of energy consumption. The profile of electricity demand in the residential sector is highly correlated with the time of active occupancy of the dwellings; therefore in this study the occupancy patterns in Spanish properties was determined using the 2009–2010 Time Use Survey (TUS), conducted by the National Statistical Institute of Spain. The survey identifies three peaks in active occupancy, which coincide with morning, noon and evening. This information has been used to input into a stochastic model which generates active occupancy profiles of dwellings, with the aim to simulate domestic electricity consumption. TUS data were also used to identify which appliance-related activities could be considered for Demand Side Management solutions during the three peaks of occupancy.

Electricity use in the commercial kitchen

Academic and industrial literature concerning the energy use of commercial kitchens is scarce. Electricity consumption data were collected from distribution board current transformers in a sample of fourteen UK public house-restaurants. This was set up to identify patterns of appliance use as well as to assess the total energy consumption of these establishments. The electricity consumption in the selected commercial kitchens was significantly higher than current literature estimates. On average, 63% of the premises’ electricity consumption was attributed to the catering activity. Key appliances that contributed to the samples average daily electricity consumption of the kitchen were identified as refrigeration (70 kWh, 41%), fryers (11 kWh, 13%), combination ovens (35 kWh, 12%), bain maries (27 kWh, 9%) and grills (37 kWh, 12%). Behavioural factors and poor maintenance were identified as major contributors to excessive electricity usage with potential savings of 70% and 45% respectively. Initiatives are required to influence operator behaviour, such as the expansion of mandatory energy labelling, improved feedback information and the use of behaviour change campaigns. Strict maintenance protocols and more appropriate sizing of refrigeration would be of great benefit to energy reduction.

Identifying trends in domestic electricity consumption in Botswana

Data on electricity consumption patterns relating to different end uses in domestic houses in Botswana is virtually non-existent, despite the fact that the total electricity consumption patterns are available. This can be attributed to the lack of measured and quantified data and in other instances the lack of modern technology to perform such investigations. This paper presents findings from initial studies that are envisaged to bridge the gap. Electricity consumption patterns of 73 domestic households across three cities have been studied. This was carried out through a questionnaire survey, calculated national metering data and electricity measurements. All together nine appliance groups were identified. The results showed the mean electricity consumption for the households considering the calculated consumption from bills and the survey to be t = 4.23; p < 0.000067, two-tailed. The findings of this paper focus on a relatively small sample size (73). It would therefore not be wise to draw sweeping conclusions from the analysis or to make statements that would be aimed at influencing policies. However, the results presented forms a formidable base for further research, which is currently on going.

Assessing the benefits of domestic hot fill washing appliances

Washing machine and dishwasher appliance use accounts for approximately 10% of electricity demand in EU households. The majority of this demand is due to the operation of electric heating elements inside appliances. This paper investigates the potential benefits that can be realised by adding a hot fill connection to washing appliances, with respect to carbon emissions, demand side management and renewable energy integration. Initial laboratory testing of new hot and cold fill appliances has resulted in modifications to optimise hot fill intake, and a novel numerical model presents a method of characterising appliance electricity use in different configurations. In order to validate model findings and test the use of new hot fill appliances in situ, a pilot study has recorded appliances’ resource consumption at one-minute resolution in fourteen households. The addition of hot fill reduced the total dishwasher and washing machine electricity consumption by 38% and 67% respectively. Depending on how hot water is supplied to appliances it is estimated that hot fill use results in an annual household carbon saving of up to 147 kgCO2. Further to direct electricity reduction, hot fill appliances can offer a method of time shifting demand away from peak periods without inconveniencing occupants’ lifestyles.

No asylum for “Infiltrators”: the legal predicament of Eritrean and Sudanese nationals in Israel

This article explores the precarious status of Eritrean and Sudanese nationals in Israel. Having crossed the Israeli-Egyptian border without authorisation and not through an official border crossing, Israeli law defines such individuals as ‘infiltrators’, a charged term which dates back to border-crossings into Israel by Palestinian Fedayeen in the 1950s. Eritreans and Sudanese nationals constitute over 90 percent of ‘infiltrators’ in Israel. Their livelihood is curtailed through hostility, sanctions, and detention, while (at the time of writing) Israel refrains from deporting them to their respective countries of origin, recognising that such forced removal could expose them to risks to their lives and/or freedom. Israel was the 10th state to ratify the 1951 Refugee Convention, and has acceded to its 1967 Protocol which removed the 1951 Convention’s temporal and geographic restrictions, yet it has not incorporated these treaties into its domestic law not has it enacted primary legislation that sets eligibility criteria for ‘refugee’ status and regulates the treatment of asylum-seekers. Israeli law also fails to accord subsidiary protection status to persons that the state considers to be non-removable, whether or not they satisfy the definition of a ‘refugee’ under the 1951 Convention. Absent legal recognition of ‘refugee’, ‘asylum-seeker’, and ‘beneficiary of subsidiary protection’ statuses, Eritreans and Sudanese nationals are left in legal limbo for an indefinite period qua irregular non-removable persons. This article takes stock of their legal predicament.

Arrest of root formation in a permanent maxillary central incisor subsequent to trauma and pulp necrosis to the primary predecessor

This paper reports a case in which a previous traumatic injury at the age of 2 and pulp necrosis to a primary incisor resulted in a rare injury to the permanent successor tooth. The radiographic examination at the age of 9 showed the arrest of root formation of the permanent maxillary right central incisor, which did not erupt. Tooth 11 was extracted and a functional removable space maintainer was prepared. At the age of 17, the patient received an anterior fixed prosthesis for re-establishment of the esthetics, phonetics and deglutition.

Unilateral Correction of Space Loss in the Mixed Dentition

Distalization of maxillary molars is indicated for correction of Class II dental malocclusion and for space gain in cases of space deficiency. The ideal treatment with an intraoral fixed appliance for molar distalization should fulfill the following requirements: patient compliance; acceptable esthetics; comfort; minimum anterior anchor loss (as evidenced by inclination of incisors); bodily movement of the molars to avoid undesirable effects and unstable outcomes; and minimum time required during sessions for placement and activations. The purpose of this paper was to present an alternative treatment for space recovery in the area of the maxillary right second premolar when there has been significant mesial movement of the permanent maxillary right first molar. We used a modified appliance that allows unilateral molar distalization in cases of unilateral tooth/arch size discrepancy using the opposite side as anchor, thus reducing the mesialization of the anterior teeth. (Pediatr Dent 2008;30:334-41) Received August 17, 2006 / Last Revision October 17, 2007 / Revision Accepted October 17, 2007

Effect of Two Restorative Materials on Root Dentine Erosion

This study sought to evaluate the microhardness of root dentine adjacent to glass-ionomer and composite resin restorations after erosive challenge. A crossover study was performed in two phases of 4 consecutive days each. One hundred twelve bovine root dentine slabs were obtained, and standardized box-shaped cavities were prepared at center of each specimen. The prepared cavities were randomly restored with glass-ionomer cement or composite resin. The slabs were randomly assigned among 14 volunteers, which wore intraoral palatal device containing four restored root dentin slabs. Starting on the second day, half of the palatal acrylic devices were immersed extraorally in a lemonade-like carbonated soft drink for 90 s, four times daily for 3 days. Alter 3-day wash-out, dentine slabs restored with the alternative material were placed into palatal appliance and the volunteers started the second phase of this study. After erosive challenges. microhardness measurements were performed. Regardless of the restorative material employed, eroded specimens demonstrated lower microhardness value (p < 0.0001). At eroded condition examined in this study, dentine restored with glass-ionomer cement showed higher microhardness values (p < 0.0001). It may be concluded that the glass-ionomer cement decreases the progression of root dentine erosion at restoration margin. (C) 2010 Wiley Periodicals, Inc J Biomed Mater Res Part B Appl Biomater 93B 304-305, 2010

Effect of Three Methods for Cleaning Dentures on Biofilms Formed In Vitro on Acrylic Resin

Purpose: The aim of this study was to evaluate the effect of three denture hygiene methods against different microbial biofilms formed on acrylic resin specimens. Materials and methods: The set (sterile stainless steel basket and specimens) was contaminated (37 degrees C for 48 hours) by a microbial inoculum with 106 colony-forming units (CFU)/ml (standard strains: Staphylococcus aureus, Streptococcus mutans, Escherichia coli, Candida albicans, Pseudomonas aeruginosa, and Enterococcus faecalis; field strains: S. mutans, C. albicans, C. glabrata, and C. tropicalis). After inoculation, specimens were cleansed by the following methods: (1) chemical: immersion in an alkaline peroxide solution (Bonyplus tablets) for 5 minutes; (2) mechanical: brushing with a dentifrice for removable prostheses (Dentu Creme) for 20 seconds; and (3) a combination of chemical and mechanical methods. Specimens were applied onto a Petri plate with appropriate culture medium for 10 minutes. Afterward, the specimens were removed and the plates incubated at 37 degrees C for 48 hours. Results: Chemical, mechanical, and combination methods showed no significant difference in the reduction of CFU for S. aureus, S. mutans (ATCC and field strain), and P. aeruginosa. Mechanical and combination methods were similar and more effective than the chemical method for E. faecalis, C. albicans (ATCC and field strain), and C. glabrata. The combination method was better than the chemical method for E. coli and C. tropicalis, and the mechanical method showed intermediate results. Conclusion: The three denture hygiene methods showed different effects depending on the type of microbial biofilms formed on acrylic base resin specimens.

Filmljudets funktioner i krigsfilm : En audio-visuell analys av Apocalypse Now och Saving Private Ryan

I denna uppsats har filmljudet i krigsfilmerna Apocalypse Now och Saving Private Ryan undersökts. Detta har gjorts för att försöka bidra med ökad förståelse för filmljudets användningsområde och funktioner, främst för filmerna i fråga, men även för krigsfilm rent generellt. Filmljud i denna kontext omfattar allt det ljud som finns i film, men utesluter dock all ickediegetisk musik. Båda filmerna har undersökts genom en audio-visuell analys. En sådan analys görs genom att detaljgranska båda filmernas ljud- och bildinnehåll var för sig, för att slutligen undersöka samma filmsekvens som helhet då ljudet och bilden satts ihop igen. Den audio-visuella analysmetod som nyttjats i uppsatsen är Michel Chions metod, Masking. De 30 minuter film som analyserades placerades sedan i olika filmljudzoner, där respektive filmljudzons ljudinnehåll bland annat visade vilka främsta huvudfunktioner somfilmljudet hade i dessa filmer. Dessa funktioner är till för att bibehålla åskådarens fokus och intresse, att skapa närhet till rollkaraktärerna, samt att tillföra en hög känsla av realism och närvaro. Intentionerna med filmljudet verkade vara att flytta åskådaren in i filmens verklighet, att låta åskådaren bli ett med filmen. Att återspegla denna känsla av realism, närvaro, fokus samt intresse, visade sig också vara de intentioner som funnits redan i de båda filmernas förproduktionsstadier. Detta bevisar att de lyckats åstadkomma det de eftersträvat. Men om filmljudet använts på samma sätt eller innehar samma funktioner i krigsfilm rent genrellt går inte att säga.I have for this bachelor’s thesis examined the movie sound of the classic warfare movies Apocalypse Now and Saving Private Ryan. This is an attempt to contribute to a more profound comprehension of the appliance and importance of movie sound. In this context movie sound implies all kinds of sounds within the movies, accept from non-diegetic music. These two movies have been examined by an audio-visual analysis. It's done by auditing the sound and picture content separately, and then combined to audit the same sequence as a whole. Michel Chion, which is the founder of this analysis, calls this method Masking. The sound in this 30 minute sequence was then divided into different zones, where every zone represented a certain main function. These functions are provided to create a stronger connection to the characters, sustain the viewers interest and bring a sense of realism and presence. It seems though the intention with the movies sound is to bring the viewers to the scene in hand, and let it become their reality. To mirror this sense of realism, presence, focus and interest, proves to be the intention from an early stage of the production. This bachelor’s thesis demonstrates a success in their endeavours. Although it can’t confirm whether the movie sound have been utilized in the same manner or if they posess the same functions to warefare movies in general.

Fjärrvärmedrivna vitvaror : Erfarenheter från utveckling, installationer och kostnadsberäkningar

Värmedrivna vitvaror eller HWC-maskiner som de kallas av tillverkaren värms med varmt vatten från en cirkulerande krets via en värmeväxlare inbyggd i maskinen, till skillnad från konventionella maskiner som värms med el. Denna teknik skall inte förväxlas med maskiner som är anslutna till varmvattenledningen och fylls på med varmt vatten och som därmed begränsas till disk- och tvätt. Syftet med fjärrvärmedrivna vitvaror är alltså att använda fjärrvärme, som har lägre kvalitet och pris än elenergi för uppvärmning och torkning och på så sätt spara el och utöka fjärrvärmeunderlaget. En jämförelse av koldioxidutsläpp och primärenergianvändning mellan konventionella vitvaror och fjärrvärmedrivna vitvaror visar att både koldioxidutsläpp och primärenergianvändning blir lägre för fjärrvärmedrivna vitvaror om biobränsle anses koldioxidneutralt och den el som ersätts är producerad i kolkraftverk eller gaskombikraftverk.   Denna rapport beskriver utveckling och kommersialisering av värmedrivna vitvaror (disk- och tvättmaskiner samt torktumlare och torkskåp) och hur de kan anslutas mot fjärrvärmesystem i olika systemlösningar. Dessutom har de energimässiga och ekonomiska förutsättningarna för tekniken undersökts. Erfarenheterna från fältprovning är dock mycket begränsade, eftersom de byggen där fälttesterna skulle ske försenades. Under 2013 färdigställs ett flerbostadshus med värmedrivna vitvaror i 160 lägenheter i Västerås.   De utvecklade maskinernas värmeanvändning som andel av total energianvändning vid 60 graders framledningstemperatur har uppmätts till ca 50 % för diskmaskinen, 67 % för tvättmaskinen, 80 % för torktumlaren och 93 % för torkskåpet. I det studerade flerbostadshuset av passivhusstandard uppgår lasten från värmedrivna vitvaror komfortgolvvärme och handdukstorkar till upp mot 30 % av husets totala värmeanvändning. För småhus är motsvarande siffra upp mot 20 %. Att använda fjärrvärme istället för elvärme till dessa installationer som normalt är elvärmda kan allts minska elbehovet betydligt i lågenergibebyggelse vilket också minskar både koldioxidutsläppen och primärenergianvändningen.   Ekonomiska analyser har genomförts för två olika systemkoncept (separat vitvarukrets och Västeråsmodellen) för nybyggda småhusområden och flerfamiljshus där fjärrvärme inte bara används till vitvaror utan också till handdukstorkar och komfortgolvvärme. De ekonomiska analyserna visar att Västeråsmodellen är den mest ekonomiskt intressanta systemlösningen med värmedrivna vitvaror, handdukstork och komfortgolvvärme. I flerfamiljshus kan den vara konkurrenskraftig mot de elvärmda alternativen (konventionellt system med eldrivna vitvaror, komfortgolvvärme och handdukstorkar) om prisskillnaden mellan el och fjärrvärme är större än 0,7 kr/kWh. En parameterstudie visar att kapitalkostnaden blir ganska hög jämfört med energikostnaden, vilket betyder att lång livslängd och många cykler är viktigt för att förbättra de ekonomiska förutsättningarna för värmedrivna vitvaror. För passiva småhus blir kostnaden för Västeråsmodellen med värmedrivna vitvaror, handdukstork och komfortgolvvärme likvärdig med de elvärmda alternativen vid energiprisskillnader på 0,7 kr/kWh inklusive moms, medan det krävs prisskillnader på 0,9 kr/kWh inklusive moms för normalisolerade småhusområden.   Sammanfattningsvis kan sägas att i kommuner med ett konkurrenskraftigt fjärrvärmepris finns det viss lönsamhet för hela konceptet enligt Västeråsmodellen med värmedrivna vitvaror, komfortgolvvärme, och handdukstorkar. Om man däremot ser på konkurrensen för enskilda vitvaror är det främst torktumlaren som är konkurrenskraftig i bostäder. Målpriset på 1000 kr extra för värmedrift har inte kunnat uppnås inom projektet för diskmaskiner och tvättmaskiner. Det krävs lägre priser och låga anslutningskostnader för att räkna hem diskmaskinen och tvättmaskinen som enskilda komponenter.   Värmedrivna tvättmaskiner och torktumlare är konkurrenskraftiga i flerfamiljstvättstugor. Speciellt i de fall där beläggningen är god och flera maskiner delar på anslutningskostnaden till fjärrvärmecentralen kan värmedrift bli riktigt lönsam. Torkskåpens konkurrenskraft har inte kunnat utvärderas, då priset ännu inte fastställts. Att använda VVC-systemet för värmedistribution till värmedrivna vitvaror kan vara mycket intressant, men det kräver att legionellaproblematiken kan lösas. I nuläget finns ingen lösning som uppfyller formuleringarna i boverkets byggregler. Ett annat distributionssätt som kan vara intressant, men som inte undersökts i studien är att använda VVC för varmvattendistribution och en gemensam radiator- och vitvarukrets med konstant framledningstemperatur. Den aktör som förväntas ha störst ekonomiskt intresse av att tekniken implementeras är sannolikt fjärrvärmebolagen som får sälja mer värme och det ligger därmed främst på deras ansvar att marknadsföra tekniken i mötet med sina kunder.

Análise do perfil dos clientes de academias de ginástica : o primeiro passo para o planejamento estratégico

Neste estudo, buscou-se identificar as motivações humanas para a prática de atividade física, a fim de compreender os motivos de aderência e permanência dos indivíduos nas academias de ginástica, e a partir disso, contribuir para criar a base de uma estratégia de marketing voltada à fidelização de clientes de academias. Como metodologia, adotou-se a pesquisa descritiva como forma de aplicar conhecimentos na direção da solução de um problema específico, composto de duas etapas distintas: a primeira qualitativa (com caráter exploratório) e a segunda quantitativa (através da estruturação, aplicação de um questionário, para verificar e mensurar o comportamento dos consumidores de academias de ginástica). A partir da coleta, tabulação e análise dos resultados obtidos sobre a motivação dos clientes de academias, foi possível criar orientações para o planejamento estratégico voltado à fidelização dos clientes de academias de ginástica.

Opções reais: exemplo de aplicação para avaliação de reservas petrolíferas

Este trabalho teve como objetivo incluir flexibilidades gerenciais (tais como técnicas de injeção de gás e água) na avaliação de reservatórios. Concluimos que esta técnicas podem aumentar o valor dos reservatórios em até 25% segundo a teoria de opções reais. A principal vantagem da metodologia de teoria de opções face a tradicional técnica de fluxo de caixa descontado é levar em conta as questões operacionais da indústria do petróleo. Utilizamos dois modelos clássicos para a precificação de reservatórios de petróleo, e aplicamos uma análise de sensibilidade para determinarmos quais fatores são mais relevantes no seu valor econômico. Como era de se esperar em ambos os modelos, o tempo de concessão, bem como a taxa de convenience e/ou dividend yield foram os fatores mais importantes.

Acumulação de competências tecnológicas e os processos subjacentes de apredizagem: o caso da Invensis Appliances Controls Unidade Vacaria - RS

Esta dissertação enfoca o relacionamento entre acumulação de competências tecnológicas e os processos subjacentes de aprendizagem. Este relacionamento é examinado na empresa Invensys Appliance Controls Ltda. - Unidade de Vacaria/RS, durante o período de 1981 a 2000. Trata-se de uma empresa metal-mecânica, fornecedora da indústria de linha branca. Em outras palavras, a dissertação examina as implicações dos processos subjacentes de aprendizagem tecnológica para a acumulação de competências para três funções tecnológicas: processo e organização da produção, produtos e equipamentos. Os processos de aprendizagem são examinados à luz de quatro características: variedade, intensidade, funcionamento e interação, a partir do uso de estruturas de análise existente na literatura. Baseado em estudo de caso individual, este estudo encontrou que a maneira e a velocidade de acumulação de competências tecnológicas na empresa estudada estão associadas aos diversos processos usados para adquirir conhecimento tecnológico e convertê-lo em organizacional. Ademais, a simples incidência desses processos na empresa não garantiu na empresa uma implicação positiva para a acumulação de competências tecnológicas. Através do uso de estrutura existente na literatura, porém aplicada a uma indústria diferente de estudos anteriores, esta dissertação sugere que deve existir um esforço organizado, contínuo e integrado para geração e disseminação de conhecimento em toda a empresa a fim de que a acumulação de capacitação tecnológica seja acelerada na empresa.