Self-assembled natural rubber/silica nanocomposites : its preparation and characterization

A novel natural rubber/silica (NR/SiO2) nanocomposite is developed by combining self-assembly and latex-compounding techniques. The results show that the SiO2 nanoparticles are homogenously distributed throughout NR matrix as nano-clusters with an average size ranged from 60 to 150 nm when the SiO2 loading is less than 6.5 wt%. At low SiO2 contents (less-than-or-equals, slant4.0 wt%), the NR latex (NRL) and SiO2 particles are assembled as a core-shell structure by employing poly (diallyldimethylammonium chloride) (PDDA) as an inter-medium, and only primary aggregations of SiO2 are observed. When more SiO2 is loaded, secondary aggregations of SiO2 nanoparticles are gradually generated, and the size of SiO2 cluster dramatically increases. The thermal/thermooxidative resistance and mechanical properties of NR/SiO2 nanocomposites are compared to the NR host. The nanocomposites, particularly when the SiO2 nanoparticles are uniformly dispersed, possess significantly enhanced thermal resistance and mechanical properties, which are strongly depended on the morphology of nanocomposites. The NR/SiO2 has great potential to manufacture medical protective products with high performances.

Quantifying rubber degradation using NMR

Ageing can lead to the degradation of the tensile properties of natural rubber. The ageing process causes changes in the polymer segmental motion as well as the chemical structure, both of which can be monitored using nuclear magnetic resonance (NMR) spectroscopy. This work demonstrates that NMR can quantify rubber degradation due to ageing, and also that relatively simple NMR equipment can be used. This simpler equipment can be made portable and so could give a simple and fast indication of the condition of rubber in service. The 1H NMR transverse relaxation time, T2, and the 13C NMR spectrum using cross polarization and magic angle spinning (CP MAS) for samples taken at various levels of a degraded natural rubber liner were compared. These experiments showed that, as the level of degradation increased, the 1H NMR transverse relaxation time decreased. The 13C spectra showed considerable peak broadening, indicative of decreased mobility with increased level of degradation as well as the presence of degradation products. Further investigations using lower powered NMR equipment to measure the 1H NMR transverse relaxation times of two different series of natural rubbers were also performed. This work has shown that this simpler method is also sensitive to structural and mechanical property changes in the rubber. This method of monitoring rubber degradation could lead to the non-destructive use of NMR to determine the condition of a part in service.

Self-assembled natural rubber/multi-walled carbon nanotube composites using latex compounding techniques

Functionalization of multi-walled carbon nanotubes (MWCNTs) plays an important role in eliminating nanotube aggregation for reinforcing polymeric materials. We prepared a new class of natural rubber (NR)/MWCNT composites by using latex compounding and self-assembly technique. The MWCNTs were functionalized with mixed acids (H2SO₄/HNO₃ = 3:1, volume ratio) and then assembled with poly (diallyldimethylammonium chloride) and latex particles. The Fourier transform infrared spectroscopy, transmission electron microscopy, and scanning electron microscopy were used to investigate the assembling mechanism between latex particles and MWCNTs. It is found that MWCNTs are homogenously dispersed in the natural rubber (NR) latex as individual nanotubes since strong self-aggregation of MWCNTs has been greatly depressed with their surface functionalization. The well-dispersed MWCNTs produce a remarkable increase in the tensile strength of NR even when the amount of MWCNTs is only 1 wt.%. Dynamic mechanical analysis shows that the glass transition temperature of composites is higher and the inner-thermogenesis and thermal stability of NR/MWCNT composites are better, when compared to those of the pure NR. The marked improvement in these properties is largely due to the strong interfacial adhesion between the NR phase and MWCNTs. Functionalization of MWCNTs represents a potentially powerful technology for significant reinforcement of natural rubber materials.

Studies on the properties and the thermal decomposition kinetics of natural rubber prepared with calcium chloride

To evaluate calcium chloride coagulation technology, two kinds of raw natural rubber samples were produced by calcium chloride and acetic acid respectively. Plasticity retention index (PRI), thermal degradation process, thermal degradation kinetics and differential thermal analysis of two samples studied. Furthermore, thermal degradation activation energy, pre-exponential factor and rate constant were calculated. The results show that natural rubber produced by calcium chloride possesses good mechanical property and poor thermo-stability in comparison to natural rubber produced by acetic acid.

Involvement of rootstocks and their hydraulic conductance in the drought resistance of grafted rubber trees

Improving drought resistance of rubber trees has become a pressing issue with the extension of rubber plantations and the prevalence of seasonal drought. Root system is vital to water and nutrients uptake of all plants, therefore, rootstocks could play decisive roles in drought resistance of grafted rubber trees on a specific scion clone. To investigate the responses of different clone rootstocks and their grafted trees to water stress and find applicable methods for selecting drought resistant rootstocks, seven related parameters and root hydraulic properties of both seeds originated and grafted saplings of PB86, PR107, RRIM600 and GT1 were measured to assess their drought resistance. It was shown that the rootstock drought resistance and root hydraulic conductance may improve the drought resistance of the grafted rubber trees. Among the four clone rootstocks, GT1, which demonstrated more resistant to drought and higher root hydraulic conductance, was comparatively resistant to drought both for the seed propagation seedlings and grafted saplings. In addition, studies on the grafted saplings with different root hydraulic conductance further validated the possibility of selecting drought resistant rootstocks on the basis of rootstock hydraulic conductance using a high-pressure flow meter.

Structure and properties of self-assembled narural rubber/multi-walled carbon nanotube composites

Natural rubber (NR)/multi-walled carbon nanotube (MWCNTs) composites were prepared bycombining self-assembly and latex compounding techniques. The acid-treated MWCNTs (H2SO4: HNO3=3:1,volume ratio) were self-assembled with poly (diallyldimethylammonium chloride) (PDDA) through electrostaticadhesion. In the second assembling, NR/MWCNTs composites were developed by mixing MWCNTs/PDDAsolution with NR latex. The results show that MWCNTs are homogenously distributed throughout the NRmatrix as single tube and present a great interfacial adhesion with NR phase when MWCNTs contents areless than 3 wt%. Moreover, the addition of the MWCNTs brings about the remarkable enhancement in tensilestrength and crosslink density compared with the NR host, and the data peak at 2 wt% MWCNTs loadings.When more MWCNTs are loaded, aggregations of MWCNTs are gradually generated, and the tensile strengthand crosslink both decrease to a certain extent.

Preparation of constant viscosity natural rubber with mercaptan

Constant viscosity natural rubber has been prepared using mercaptan. The accelerated storage tests indicate that the storage hardening phenomenon of natural rubber can be inhibited by mercaptan. The amount of mercaptan (2-mercaptobenzothiazole) of 0.14 phr is sufficient to prepare constant viscosity natural rubber and the storage hardening numbers of constant viscosity NR in both Mooney viscosity and Wallace plasticity are less than 4. The processing properties and anti-oxidative behavior of CV-NR can be improved, although the mechanical properties of vulcanizates decreased slightly as compared to those of natural rubber. The results further support the hypothesis that the abnormal groups in natural rubber molecules are aldehyde groups and are responsible for the hardening of natural rubber.

Structure and thermal stability of natural rubber reinforced with in situ generated zinc sorbate

In situ prepared zinc disorbate (ZDS) in natural rubber (NR) by the reaction of zinc oxide and sorbic acid was used to reinforce the dicumyl peroxide-cured NR vulcanizate. The changes in mechanical properties of NR vulcanizates after ageing and were determined and the structures and thermal stability of vulcanizates were also analyzed using scanning electron microscope and thermal gravimetric analyzer. The change ratios in tensile strength and elongation at break of NR vulcanizate with theoretic formation of ZDS of 21phr can be increased to -33 from -44 and -27 from -38 after ageing and the initial weight loss temperature of NR vulcanizate can be increased for about 7°C as compared to un-reinforced NR vulcanizate, indicating that the antioxidative behavior and thermal stability of NR can be improved significantly with theoretic formation of ZDS of 21phr.

Reinforcement of natural rubber with core-shell structure silica-poly(Methyl Methacrylate) nanoparticles

A highly performing natural rubber/silica (NR/SiO2) nanocomposite with a SiO2 loading of 2 wt% was prepared by combining similar dissolve mutually theory with latex compounding techniques. Before polymerization, double bonds were introduced onto the surface of the SiO2 particles with the silane-coupling agent. The core-shell structure silica-poly(methyl methacrylate), SiO2-PMMA, nanoparticles were formed by grafting polymerization of MMA on the surface of the modified SiO2 particles via in situ emulsion, and then NR/SiO2 nanocomposite was prepared by blending SiO2-PMMA and PMMA-modified NR (NR-PMMA). The Fourier transform infrared spectroscopy results show that PMMA has been successfully introduced onto the surface of SiO2, which can be well dispersed in NR matrix and present good interfacial adhesion with NR phase. Compared with those of pure NR, the thermal resistance and tensile properties of NR/SiO2 nanocomposite are significantly improved.

Rubber latex yield and physiology of rubber tree with tea tree oil treatments

To examine the effects of tea tree oil on rubber latex yield and the resulting latex physiological parameters of rubber tree （Hevea brasiliensis），clean water and 20%，40%，60%，80% and 100% of tea tree oil were applied on the tapping cut of rubber trees. The data were analyzed by Duncan test and its results showed that when compared to clean water （ck），80% and 100% of tea tree oil stimulation significantly promoted rubber latex yield（P＜0.05）. In addition，the latex physiological parameters changed with the sucrose content（P＜0.01），magnesium ion content （P＜0.01） and inorganic phosphorus content （P＜0.01） of latex significantly increasing and thiol content significantly deceasing （P＜0.01）. The effect of tea tree oil treatments on rubber yield was similar to the impact of 0.5% ethrel stimulation. However，compared to ethrel stimulation，100% tea tree oil treatment significantly increased dry rubber and sucrose contents （P＜0.01） and decreased thiol content （P＜0.01）. Thus，tea tree oil treatment involved different latex yield promotion mechanisms than that of ethrel stimulation.