Isolation and characterization of the female sex pheromone of the sugar beet cyst nematode, heterodera schachtii, and an analysis of male precopulatory behaviour /

The sugar beet cyst nematode, Heterodera schachtii, is a major agricultural pest. The disruption of the mating behaviour of this plant parasite in the field may provide a means of biological control, and a subsequent increase in crop yield. The H. schachtii female sex pheromone, which attracts homospecific males, was collected in an aqueous medium and isolated using high performance liquid chromatography. Characterization of the male-attractive material revealed that it was heat stable and water soluble. The aqueous medium conditioned by female H. schachtii was found to be biologically active and stimulated male behaviour in a concentration dependent manner. The activity of the crude pheromone was specific to males of H. schachtii and did not attract second stage juveniles. Results indicated that vanillic acid, a putative nematode pheromone, is not an active component of the H. schachtii sex pheromone. Male H. schachtii exhibited stylet thrusting, a poorly understood behaviour of the male, upon exposure to the female sex pheromone. This behaviour appeared to be associated with mate-finding and was used as a novel indicator of biological activity in bioassays. Serotonin, thought to be involved in the neural control of copulatory behaviour in nematodes, stimulated stylet thrusting. However, the relationship between stylet thrusting induced by the sex pheromone and stylet thrusting induced by serotonin is not clear. Extracellular electrical activity was recorded fi-om the anterior region of H. schachtii males during stylet thrusting, and appeared to be associated with this behaviour. The isolation of the female sex pheromone of H. schachtii may, ultimately, lead to the structural identification and synthesis of the active substance for use in a novel biological control strategy.

Rôle des facteurs physico-chimiques du micro-environnement intestinal et des boucles inter-hélicales du Domaine I dans l’activité de la toxine insecticide Cry9Ca du bacille de Thuringe

Une fois ingérées par un insecte sensible, les toxines insecticides du bacille de Thuringe doivent être activées par les protéases intestinales de cet insecte. Leur premier domaine, un ensemble de sept hélices-α amphipathiques, est responsable de leur insertion dans la membrane luminale de certaines cellules de l’intestin médian, ce qui crée des pores peu sélectifs. La toxicité et la capacité à former des pores d’une telle toxine, la Cry9Ca, de ses mutants simples R164A et R164K et d’un fragment de 55 kDa résultant d’un clivage protéolytique au niveau de son résidu 164 ont été étudiées à l’aide d’une combinaison de modélisation par homologie, de bioessais, d’expériences de gonflement osmotique avec des vésicules de membrane en bordure en brosse de larves de sphinx du tabac et de mesures électrophysiologiques sur des intestins isolés. Ni les mutations simples ni le clivage protéolytique n’ont altéré la toxicité de la Cry9Ca. Dans une solution à faible force ionique, toutefois, la formation des pores dépend fortement du pH : une augmentation de celui-ci de 6,5 à 10,5 a entraîné une baisse irrégulière et par étapes successives de la perméabilité membranaire. Les quatre préparations de toxine ont néanmoins dépolarisé la membrane apicale d’intestins médians fraîchement isolés baignant dans une solution contenant 122 mM de KCl à pH 10,5. L’activité de la Cry9Ca, et des mutants R164A et R164K, a été grandement stimulée lorsque les expériences ont été effectuées en présence de suc intestinal, de lipides extraits d’un volume équivalent de suc intestinal ou d’un cocktail d’inhibiteurs de protéases solubles dans l’eau. De plus, le rôle des boucles inter-hélicales du Domaine I lors de l’insertion dans la membrane a été étudié avec des mutants doubles de la Cry9Ca dont les mutations introduisaient, neutralisaient ou renversaient une charge électrique. À l’exception de trois d’entres eux, tous ces mutants ont conservé une toxicité et une capacité à former des pores comparables à celles de la toxine parentale. L’ensemble de ces résultats suggère que le micro-environnement de l’intestin médian contribue à minimiser l’influence des charges de surface portées par les résidus des boucles inter-hélicales du Domaine I sur la capacité des toxines du bacille de Thuringe à former des pores. Il indique aussi que, d’une part, selon le site de clivage et les conditions expérimentales utilisées, des protéolyses supplémentaires de la toxine Cry9Ca activée peuvent soit stimuler, soit nuire à son activité et que, d’autre part, le suc intestinal du sphinx du tabac contient probablement un inhibiteur de protéases qui pourrait jouer un rôle important dans l’activité des toxines du bacille de Thuringe.

Contenu total en éléments traces de sols forestiers du Québec méridional

Les sols forestiers constituent un réservoir considérable d’éléments nutritifs disponibles pour soutenir la productivité forestière. Ces sols contiennent aussi une quantité, encore inconnue à ce jour, d’éléments traces biodisponibles provenant de sources anthropiques ou naturelles. Or, plusieurs de ces éléments recèlent un potentiel toxique pour les organismes vivants. Ainsi, la quantification de la concentration et du contenu total en éléments traces des sols forestiers s’avère nécessaire afin d’évaluer les impacts des perturbations sur la qualité des sols. Les objectifs de ce projet de recherche sont: 1) de mesurer le contenu total en éléments traces en phase solide (Ag, As, Ba, Cd, Ce, Co, Cr, Cu, Mn, Ni, Pb, Rb, Se, Sr, Tl, V, Y, Zn) des divers horizons de sols d’écosystèmes forestiers du Québec méridional; 2) d’établir des liens significatifs entre la fraction soluble dans l’eau des éléments traces et les propriétés des horizons de sols et; 3) d’évaluer le rôle de la proximité d’un centre urbain sur les contenus en éléments traces. Pour répondre à ces objectifs, quatre profils de sols situés dans la région de St-Hippolyte et deux situés dans la région de Montréal furent échantillonnés jusqu'à l'atteinte du matériel parental. Les résultats de ce projet de recherche ont révélé que le contenu total en éléments traces présents dans les profils de sols se retrouve en grande partie dans les fragments grossiers du sol. Il a été démontré que la teneur en carbone organique, les complexes organométalliques et les oxydes de fer et d’aluminium dictent la distribution en profil de la majorité des éléments traces étudiés. Finalement, il fut prouvé que la région de Montréal présente des niveaux de contamination en éléments traces (Ag, As, Ba, Cu, Mn, Pb, Rb, Se, Sr, Tl et Zn) supérieurs à ceux rencontrés dans les Laurentides.

Le rôle du récepteur B1 des kinines dans le développement de la rétinopathie diabétique

La rétinopathie diabétique est associée à plusieurs changements pathologiques du lit vasculaire rétinien, incluant l’ouverture de la barrière hémato-rétinienne, l’inflammation vasculaire et la modification du débit sanguin. Récemment, il a été proposé que le récepteur B1 des kinines, qui est surexprimé dans la rétine diabétique, puisse être impliqué dans le développement de ces altérations vasculaires. Ainsi, cette thèse présente les effets de traitements pharmacologiques avec des antagonistes du récepteur B1 sur la perfusion rétinienne, la perméabilité vasculaire, l’infiltration des leucocytes (leucostasie), l’expression de médiateurs de l’inflammation et la production d’anion superoxyde dans la rétine du rat rendu diabétique avec la streptozotocine (STZ). Les résultats obtenus montrent que l’application oculaire (10 µl d’une solution à 1%, deux fois par jour pendant 7 jours) de LF22-0542, un antagoniste hydrosoluble du récepteur B1, bloque significativement l’hyperperméabilité vasculaire, la leucostasie, le stress oxydatif et l’expression génique de médiateurs de l’inflammation (B1R, iNOS, COX-2, VEGF-R2, IL-1β et HIF-1α) dans la rétine chez le rat à 2 semaines de diabète. L’administration orale (3 mg/kg) d’un antagoniste non-peptidique et sélectif pour le récepteur B1, le SSR240612, entraîne une diminution du débit sanguin rétinien 4 jours après l’induction du diabète mais n’a aucun effet sur la réduction de la perfusion rétinienne à 6 semaines. Le récepteur B1 joue donc un rôle protecteur au tout début du diabète en assurant le maintien d’un débit sanguin normal dans la rétine; un effet qui n’est toutefois pas maintenu pendant la progression du diabète. Ces données présentent ainsi la dualité du récepteur B1 avec des effets à la fois protecteurs et délétères. Elles suggèrent aussi un rôle important pour le récepteur B1 dans l’inflammation rétinienne et le développement des altérations vasculaires. Le récepteur B1 pourrait donc représenter une nouvelle cible thérapeutique pour le traitement de la rétinopathie diabétique.

Développement de nouveaux polymères amphiphiles comme floculants versatiles pour le traitement de l’eau issue de l’industrie pétrolière

Les polymères hydrosolubles sont utilisés dans diverses industries pour permettre la floculation, soit une séparation solide-liquide de particules présentes en suspension colloïdale. Afin de réduire les impacts environnementaux de l’exploitation des sables bitumineux en Alberta, l’industrie est à la recherche de nouveaux moyens et procédés pour traiter les résidus miniers permettant de séparer les matières solides et de récupérer l’eau. L’objectif des travaux présentés est d’améliorer la floculation, la densification et la déshydratation de ces résidus miniers aqueux par de nouveaux polymères synthétiques. Des homopolymères d’acrylamide de différentes masses molaires ont été synthétisés pour étudier l’influence de la masse molaire sur l’efficacité de floculation. Le taux initial de sédimentation (TIS) est le paramètre qui fut utilisé afin de comparer l’efficacité de floculation des différents polymères. Il a été possible de confirmer l’importance de la masse molaire sur l’efficacité de floculation et de déterminer une masse molaire minimale d’environ 6 MDa pour des polyacrylamides, afin d’obtenir l’efficacité de floculation maximale de suspensions colloïdales principalement composées de kaolin. Afin d’étudier l’effet des charges sur l’efficacité de floculation, des polymères anioniques et cationiques ont été synthétisés. Une série de copolymères d’acrylamide et d’acide acrylique ont été synthétisés comme polymères anioniques et deux séries de copolymères ont été synthétisés comme polymères cationiques, soit des copolymères d’acrylamide et de chlorure de diallyldiméthylammonium et des copolymères de 4-vinyl pyridine et de 1-méthyl-4-vinyl pyridinium. Il a été démontré que les charges anioniques des polymères avaient peu d’influence sur l’efficacité de floculation et que leur comportement en présence de sels était différent de ce que prévoyait la littérature. Il a aussi été démontré que les charges cationiques des polymères n’améliorent pas l’efficacité de floculation. Par la suite, des séries de copolymères amphiphiles, avec des monomères d’acrylamide, de N-alkylacrylamides et d’acrylonitrile, ont été synthétisés, pour étudier l’effet du caractère amphiphile sur la déshydratation des résidus miniers. Le pourcentage de déshydratation nette est le paramètre qui fut utilisé afin de comparer l’efficacité de déshydratation des différents polymères. Il a été possible de développer des copolymères amphiphiles qui améliorent l’efficacité de déshydratation par rapport à des homopolymères d’acrylamide. Il ne fut pas possible de déterminer une tendance entre la balance hydrophile/hydrophobe des copolymères amphiphiles et l’efficacité de déshydratation.

Development of Polymer Cement Composites

Research in the field of polymer modified cement has been carried out for the last 70 years or more. Polymers are mostly used to enhance durability and sustainability of cement concrete and in combination with classical construction materials a synergistic effect is obtained. In this work different polymers were added to Portland cement in various proportions and the mechanical and chemical resistance properties of the resultant composites when exposed to chemical environments were studied. Microstructural studies were also carried out to investigate the morphology of the composite and analyse the nature of interactions taking place between the cement and polymer phases. Though most polymers did not improve the compressive strength of the cement paste, it was found that they enhanced the resistance of the virgin cement paste to external chemical environments. The polymers seal the pores in the cement matrix and bridge the microcracks within the composite. Some of the polymers underwent chemical interactions with the cement paste thereby interfering in the hydration of cement. Polymers also decreased the leachability of water soluble components of virgin cement resulting in composites having improved durability. An attempt to correlate the structure of the polymers with the properties of the resultant composites is also presented.

Design of Cyclophanes: Synthesis and Study of Photophysical and Biomolecular Recognition Properties

Development of organic molecules that exhibit selective interactions with different biomolecules has immense significance in biochemical and medicinal applications. In this context, our main objective has been to design a few novel functionaIized molecules that can selectively bind and recognize nucleotides and DNA in the aqueous medium through non-covalent interactions. Our strategy was to design novel cycIophane receptor systems based on the anthracene chromophore linked through different bridging moieties and spacer groups. It was proposed that such systems would have a rigid structure with well defined cavity, wherein the aromatic chromophore can undergo pi-stacking interactions with the guest molecules. The viologen and imidazolium moieties have been chosen as bridging units, since such groups, can in principle, could enhance the solubility of these derivatives in the aqueous medium as well as stabilize the inclusion complexes through electrostatic interactions.We synthesized a series of water soluble novel functionalized cyclophanes and have investigated their interactions with nucleotides, DNA and oligonucIeotides through photophysical. chiroptical, electrochemical and NMR techniques. Results indicate that these systems have favorable photophysical properties and exhibit selective interactions with ATP, GTP and DNA involving electrostatic. hydrophobic and pi-stacking interactions inside the cavity and hence can have potential use as probes in biology.

Cadmium Selenide Based Core-Shell Quantum Dots for Biosensing and Imaging Applications

The overall focus of the thesis involves the synthesis and characterization of CdSe QDs overcoated with shell materials for various biological and chemical sensing applications. Second chapter deals with the synthesis and characterization of CdSe and CdSe/ZnS core shell QDs. The primary attention of this work is to develop a simple method based on photoinduced charge transfer to optimize the shell thickness. Synthesis of water soluble CdSe QDs, their cytotoxicity analysis and investigation of nonlinear optical properties form the subject of third chapter. Final chapter deals with development of QD based sensor systems for the selective detection of biologically and environmentally important analytes from aqueous media.

Nutritional studies in juvenile penaeus indicus with fererence to protein and vitamin requirements

Man in his quest to explore food has turned towards the oceans and during the last five decades there has been phenomenal increase in the exploitation of the marine fisheries resources. The present study is carried out to determine the requirement of protein and water-soluble vitamins in the diet of juveniles of the Indian white prawn p.indicus using purified diets and to evaluate the nutritive value of a few plant and animal protein sources for the same species. A total of ten statistically designed experiments are conducted in the laboratory undermost identical conditions and following similar methodologies. The study also tries to suggest the essential and optimal requirements for protein as well as water-soluble vitamins in the diet of juvenile p.indicus

Influence of collagen content on the texture andstorage quality of fish mince basedproducts

Objectives of the present study are to find out the proximate composition of 20 commercially important tropical fish species on the west coast of India. To determine the collagen content in these commercially important fish species and fractionation of collagen into acid soluble collagen (ASC) and hot water soluble (insoluble) collagen (ISC). To classify fishes according to its collagen content and To study the different storage characteristics in the mince based product—surimi, from different species of fishes. The researcher tries to find out a suitable collagen source to incorporate in surimi. and studies the different storage qualities in the mince based product, surimi at different levels of collagen in different species of fishes. The optimum collagen level to get desirable texture and storage quality for mince based product. The researcher aims to develop some products from surimi with desirable level of collagen. And compare the products prepared from surimi of lesser collagen content fish containing desirable level of collagen with surimi prepared with high collagen content fish without collagen. This study gains in importance as there is littleinformation on the collagen content of different species of fishes in India. So far no attempt was made to classify fishes according to its collagen content.

Changes in Biochemical Composition in Indian Major Carps in Relation to size

Total biochemical composition of freshwater major carps, Labeo rohita -(r9hu); Catla catla (catla); Cirrltinus tnrigala (mrigal), in relation to size was evaluated . The water soluble nitrogen fraction constituted about 21% of the tota l nitro gen . Salt so luble fraction constituted 55 - 60% of the total nitrogen. Non-protein nitrogen represented 12% of the total nit rogen in all the cases except mri gal of small size (9.36%). The insoluble connec tive tissu e contributed to 2-3 per cent of tota l nitrogen . The monounsaturated fatty acid s (MUFA) formed 31-39% of the total fatty acids and 60-68% of the MUFA in freshwat er carps was CI 8:1. The esse ntial amino acids contributed to 41 to 51% of the total amino acid s in freshwater major carps. Arom atic amino acid content was sligh tly higher compared to marine fishe s while the proportion of proline was less. Varia tions in compos ition in rela tion to size are discu ssed . The autolytic activi ty was significantly higher in small fish in all the three species

Behaviour of mrigal (cirrihinus mrigala) meat components during the washing process in the preparation of surimi

To elucidate the effect of washing, on flesh components, mrigal flesh was washed through one, two and three washing cycles. Washing resulted in absorption of water (1-3%) and loss of fat (49%). 35% loss of soluble protein (SP) was noticed in the first washing itself and the loss is almost equally shared by the sarcoplasmic (18% of SP) and the myofibrillar proteins (17% of SP). The subsequent washings removed small portions of water-soluble sarcoplasmic proteins resulting in the concentration of myofibrillar proteins. 73% of the soluble protein was retained in the flesh after three washing cycles. The protein had undergone marginal conformational changes as reflected by the decrease in the actomyosin Ca super(2+) ATPase activity The rheological properties of the washed flesh were,however, significantly better than that of the unwashed mince

Design and study of self-assembled functional organic and hybrid systems for biological applications

The focus of self-assembly as a strategy for the synthesis has been confined largely to molecules, because of the importance of manipulating the structure of matter at the molecular scale. We have investigated the influence of temperature and pH, in addition to the concentration of the capping agent used for the formation of the nano-bio conjugates. For example, the formation of the narrower size distribution of the nanoparticles was observed with the increase in the concentration of the protein, which supports the fact that γ-globulin acts both as a controller of nucleation as well as stabiliser. As analyzed through various photophysical, biophysical and microscopic techniques such as TEM, AFM, C-AFM, SEM, DLS, OPM, CD and FTIR, we observed that the initial photoactivation of γ-globulin at pH 12 for 3 h resulted in small protein fibres of ca. Further irradiation for 24 h, led to the formation of selfassembled long fibres of the protein of ca. 5-6 nm and observation of surface plasmon resonance band at around 520 nm with the concomitant quenching of luminescence intensity at 680 nm. The observation of light triggered self-assembly of the protein and its effect on controlling the fate of the anchored nanoparticles can be compared with the naturally occurring process such as photomorphogenesis.Furthermore,our approach offers a way to understand the role played by the self-assembly of the protein in ordering and knock out of the metal nanoparticles and also in the design of nano-biohybrid materials for medicinal and optoelectronic applications. Investigation of the potential applications of NIR absorbing and water soluble squaraine dyes 1-3 for protein labeling and anti-amyloid agents forms the subject matter of the third chapter of the thesis. The study of their interactions with various proteins revealed that 1-3 showed unique interactions towards serum albumins as well as lysozyme. 69%, 71% and 49% in the absorption spectra as well as significant quenching in the fluorescence intensity of the dyes 1-3, respectively. Half-reciprocal analysis of the absorption data and isothermal titration calorimetric (ITC) analysis of the titration experiments gave a 1:1 stoichiometry for the complexes formed between the lysozyme and squaraine dyes with association constants (Kass) in the range 104-105 M-1. We have determined the changes in the free energy (ΔG) for the complex formation and the values are found to be -30.78, -32.31 and -28.58 kJmol-1, respectively for the dyes 1, 2 and 3. Furthermore, we have observed a strong induced CD (ICD) signal corresponding to the squaraine chromophore in the case of the halogenated squaraine dyes 2 and 3 at 636 and 637 nm confirming the complex formation in these cases. To understand the nature of interaction of the squaraine dyes 1-3 with lysozyme, we have investigated the interaction of dyes 1-3 with different amino acids. These results indicated that the dyes 1-3 showed significant interactions with cysteine and glutamic acid which are present in the side chains of lysozyme. In addition the temperature dependent studies have revealed that the interaction of the dye and the lysozyme are irreversible. Furthermore, we have investigated the interactions of these NIR dyes 1-3 with β- amyloid fibres derived from lysozyme to evaluate their potential as inhibitors of this biologically important protein aggregation. These β-amyloid fibrils were insoluble protein aggregates that have been associated with a range of neurodegenerative diseases, including Huntington, Alzheimer’s, Parkinson’s, and Creutzfeldt-Jakob diseases. We have synthesized amyloid fibres from lysozyme through its incubation in acidic solution below pH 4 and by allowing to form amyloid fibres at elevated temperature. To quantify the binding affinities of the squaraine dyes 1-3 with β-amyloids, we have carried out the isothermal titration calorimetric (ITC) measurements. The association constants were determined and are found to be 1.2 × 105, 3.6× 105 and 3.2 × 105 M-1 for the dyes, 1-3, respectively. To gain more insights into the amyloid inhibiting nature of the squaraine dyes under investigations, we have carried out thioflavin assay, CD, isothermal titration calorimetry and microscopic analysis. The addition of the dyes 1-3 (5μM) led to the complete quenching in the apparent thioflavin fluorescence, thereby indicating the destabilization of β-amyloid fibres in the presence of the squaraine dyes. Further, the inhibition of the amyloid fibres by the squaraine dyes 1-3, has been evidenced though the DLS, TEM AFM and SAED, wherein we observed the complete destabilization of the amyloid fibre and transformation of the fibre into spherical particles of ca. These results demonstrate the fact that the squaraine dyes 1-3 can act as protein labeling agents as well as the inhibitors of the protein amyloidogenesis. The last chapter of the thesis describes the synthesis and investigation of selfassembly as well as bio-imaging aspects of a few novel tetraphenylethene conjugates 4-6.Expectedly, these conjugates showed significant solvatochromism and exhibited a hypsochromic shift (negative solvatochromism) as the solvent polarity increased, and these observations were justified though theoretical studies employing the B3LYP/6-31g method. We have investigated the self-assembly properties of these D-A conjugates though variation in the percentage of water in acetonitrile solution due to the formation of nanoaggregates. Further the contour map of the observed fluorescence intensity as a function of the fluorescence excitation and emission wavelength confirmed the formation of J-type aggregates in these cases. To have a better understanding of the type of self-assemblies formed from the TPE conjugates 4-6, we have carried out the morphological analysis through various microscopic techniques such as DLS, SEM and TEM. 70%, we observed rod shape architectures having ~ 780 nm in diameter and ~ 12 μM in length as evidenced through TEM and SEM analysis. We have made similar observations with the dodecyl conjugate 5 at ca. 70% and 50% water/acetonitrile mixtures, the aggregates formed from 4 and 5 were found to be highly crystalline and such structures were transformed to amorphous nature as the water fraction was increased to 99%. To evaluate the potential of the conjugate as bio-imaging agents, we have carried out their in vitro cytotoxicity and cellular uptake studies though MTT assay, flow cytometric and confocal laser scanning microscopic techniques. Thus nanoparticle of these conjugates which exhibited efficient emission, large stoke shift, good stability, biocompatibility and excellent cellular imaging properties can have potential applications for tracking cells as well as in cell-based therapies. In summary we have synthesized novel functional organic chromophores and have studied systematic investigation of self-assembly of these synthetic and biological building blocks under a variety of conditions. The investigation of interaction of water soluble NIR squaraine dyes with lysozyme indicates that these dyes can act as the protein labeling agents and the efficiency of inhibition of β-amyloid indicate, thereby their potential as anti-amyloid agents.

Stimuli-responsive Novel Amphiphilic Polymers for Chemical and Biomedical Applications

Amphiphilic polymers are a class of polymers that self-assemble into different types of microstructure, depending on the solvent environment and external stimuli. Self assembly structures can exist in many different forms, such as spherical micelles, rod-like micelles, bi-layers, vesicles, bi-continuous structure etc. Most biological systems are basically comprised of many of these organised structures arranged in an intelligent manner, which impart functions and life to the system. We have adopted the atom transfer radical polymerization (ATRP) technique to synthesize various types of block copolymer systems that self-assemble into different microstructure when subject to an external stimuli, such as pH or temperature. The systems that we have studied are: (1) pH responsive fullerene (C60) containing poly(methacrylic acid) (PMAA-b-C60); (2) pH and temperature responsive fullerene containing poly[2-(dimethylamino)ethyl methacrylate] (C₆₀-b-PDMAEMA); (3) other responsive water-soluble fullerene systems. By varying temperature, pH and salt concentration, different types microstructure can be produced. In the presence of inorganic salts, fractal patterns at nano- to microscopic dimension were observed for negatively charged PMAA-b-C60, while such structure was not observed for positively charged PDMAEMA-b-C60. We demonstrated that negatively charged fullerene containing polymeric systems can serve as excellent nano-templates for the controlled growth of inorganic crystals at the nano- to micrometer length scale and the possible mechanism was proposed. The physical properties and the characteristics of their self-assembly properties will be discussed, and their implications to chemical and biomedical applications will be highlighted.

Surface Functionalization of Monodisperse Magnetic Nanoparticles

We present a systematic methodology to functionalize magnetic nanoparticles through surface-initiated atom-transfer radical polymerization (ATRP). The magnetite nanoparticles are prepared according to the method proposed by Sun et al. (2004), which leads to a monodisperse population of ~ 6 nm particles stabilized by oleic acid. The functionalization of the nanoparticles has been performed by transforming particles into macro-initiators for the ATRP, and to achieve this two different routes have been explored. The first one is the ligand-exchange method, which consists of replacing some oleic acid molecules adsorbed on the particle surface with molecules that act as an initiator for ATRP. The second method consists in using the addition reaction of bromine to the oleic acid double bond, which turns the oleic acid itself into an initiator for the ATRP. We have then grown polymer brushes of a variety of acrylic polymers on the particles, including polyisopropylacrylamide and polyacrylic acid. The nanoparticles so functionalized are water soluble and show responsive behavior: either temperature responsive behavior when polyisopropylacrylamide is grown from the surface or PH responsive in the case of polyacrylic acid. This methodology has potential applications in the control of clustering of magnetic nanoparticles.