Plant density and nitrogen fertilization in Swiss chard

An experiment was conducted to evaluate the effect of plant spacing and nitrogen fertilization on Swiss chard's yield, from September to November 2009. The experimental design was of randomized blocks in split plot with four replications. In the plots were allocated the two plant spacings (0.30 and 0.50 m) and in the subplots the five doses of nitrogen (0, 40, 80, 120 and 160 kg ha(-1)). The crop was harvested 90 days after transplanting. The plant spacing of 0.50 m provided increased production of total fresh weight of shoot (961.7 g plant(-1)) and marketable (873.1 g plant(-1)). However, the highest total yield (77.8 t ha(-1)) and marketable (64.5 t ha(-1)) was achieved with the smaller spacing between plants (0.30 m). The N rates applied in coverage until 160 kg ha(-1) increased in a linear form the total and marketable production of fresh mass of shoots, the total and marketable yield, the N content and the N accumulation in the shoots of Swiss chard plants on the evaluated plant spacings.

Effects of row spacing and intercrop on maize grain yield and forage production of palisade grass

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Different timing of whitefly control and soybean yield

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Phosphorus rates on yield and quality of lettuce seeds

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Spatial variability of forage yield and soil physical attributes of a Brachiaria decumbens pasture in the Brazilian Cerrado

The objective of this study was to analyze variability, linear and spatial correlations of forage dry mass yield (FDM) and dry matter percentage (DM%) of Brachiaria decumbens with the bulk density (BD), gravimetric (GM) and volumetric (VM) moisture, mechanical resistance to penetration (RP) and organic matter content (OM), at depths 1 (0-0.10 m) and 2 (0.10-0.20 m), in a Red Latosol (Oxisol), in order to select an indicator of soil physical quality and identify possible causes of pasture degradation. The geostatistical grid was installed to collect soil and plant data, with 121 sampling points, over an area of 2.56 ha. The linear correlation between FDM × DM% and FDM × BD2 was low, but highly significant. Spatial correlations varied inversely and positively, respectively. Except for DM% and BD, at both depths, the other attributes showed average to high variability, indicating a heterogeneous environment. Thus, geostatistics emerges as an important tool in understanding the interactions in pasture ecosystems, in order to minimize possible causes of degradation and indicate better alternatives for soil-plant-animal management. The decrease in FDM and increased BD1 are indicators of physical degradation (compaction) of Red Latosol (Oxisol), particularly in the places with the highest concentration of animals and excessive trampling, in Cerrado conditions, in the municipality of Selvíria, Mato Grosso do Sul State, Brazil.

Strategy of specification of management areas: rice grain yield as related to soil fertility

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Inter-relation between soybean yield and soil compaction under degraded pasture in Brazilian Savannah

As pastagens cultivadas do Cerrado brasileiro são responsáveis pela metade da produtividade da carne bovina destinada à alimentação da população, enquanto as culturas agrícolas o são pela terça parte de sua produtividade de grãos, desempenhando importante papel econômico-financeiro para o país. Dessa forma, no ano agrícola 2005/2006, na Fazenda de Ensino e Pesquisa da Faculdade de Engenharia de Ilha Solteira - FEIS/UNESP, foram estudadas a variabilidade e a dependência espacial entre atributos físicos do solo e a produtividade da soja, quando rotacionados após a pastagem degradada com Brachiaria, sobre um Latossolo Vermelho distroférrico. Também foram estudadas correlações lineares e espaciais entre esses atributos, apurando condições que proporcionassem aumento da produtividade agrícola. Para isso, na área com a referida pastagem instalou-se uma malha contendo 124 pontos amostrais, com espaçamentos de 10,0 x 10,0 e de 5,0 x 5,0 m entre eles, numa área total de 7.500 m². Dos pontos de vista linear e espacial, a elevada produtividade de grãos de soja pode ser explicada em razão do número de grãos por planta e da macroporosidade do solo. A alta variabilidade obtida na maioria dos atributos do solo denotou que a integração lavoura-pecuária é um sistema que proporciona heterogeneidade do ambiente físico do solo.

Cotton development and yield according to nitrogen application and cover crops

Nitrogen application on the cover and the maintenance of straw, conducted by direct seeding, should meet the needs of agriculture and promote soil conservation. This study evaluates the effect of pre-sowing nitrogen application in cotton crops and cover crops by direct seeding, on the development and yield of cotton. It was conducted in the municipality of Selviria-MS during the agricultural years 2005/06, 2006/07 and 2007/08. The experimental design used was a randomized block design consisting of three cover crops (forage turnip, black oat and white oat) and four nitrogen doses (0, 30, 60 and 90 kg of N ha(-1)) in pre-sowing of cotton. In April 2006, April 2007 and April 2008, the assessments of plant development and also harvesting of the experimental plots of cotton cultivars were conducted. The results showed that after planting the cover crops, the yield and development and the heights of cotton plants increased with the use of pre-sowing N of 90 kg ha(-1), also showing that the forage turnip is a coverage plant that provides increased cotton.

Temperature effect on dextransucrase production by Leuconostoc mesenteroides FT 045 B isolated from Alcohol and Sugar Mill Plant

Temperature (23 to 31 degrees C) and sucrose concentration ( 3 and 4%) effects on dextransucrase production by Leuconostoc mesenteroides NRRL B 512 ( F) and Leuconostoc mesenteroides FT 045 B were studied. The conditions in all fermentations were: total reaction volume 2 L, 132 rev. min-1, 0.5 vvm and pH 6.0. The optimum temperature for enzyme yield for strain NRRL B 512 ( F) was 23 degrees C, where at 8-h fermentation was possible to achieve 49.3 DSU/mL. When FT 045 B strain was utilized, 3.2 DSU/mL was obtained at temperature 23 to 25 degrees C.

Toward a hierarchical concept of plant stress

A number of attempts have been made to obtain a clear definition of biological stress. However, in spite of the efforts, some controversies on the concept of plant stress remain. The current versions are centered either on the cause (stress factor) or on the effect (stress response) of environmental stress. The objective of this study was to contribute to the definition of stress, using a hierarchical approach. Thus, we have performed an analysis of the most usual stress concepts and tested the relevance of considering different observation scales in a study on plant response to water deficit. Seedlings of Eucalyptus grandis were grown in vitro at water potentials ranging from -0.16 to -0.6 MPa, and evaluated according to growth and biochemical parameters. Data were analyzed through principal component analysis (PCA), which pointed to a hierarchical organization in plant responses to environmental disturbances. Growth parameters (height and dry weight) are more sensitive to water deficit than biochemical ones (sugars, proline, and protein), suggesting that higher hierarchical levels were more sensitive to environmental constraints than lower hierarchical ones. We suggest that before considering an environmental fluctuation as stressful, it is necessary to take into account different levels of plant response, and that the evaluation of the effects of environmental disturbances on an organism depends on the observation scale being used. Hence, a more appropriate stress concept should consider the hierarchical organization of the biological systems, not only for a more adequate theoretical approach, but also for the improvement of practical studies on plants under stress.

Número necessário de experimentos para a comparação de cultivares de feijão

O objetivo deste trabalho foi determinar o número de medições (experimentos) necessários à predição do desempenho de cultivares de feijão (Phaseolus vulgaris L.). Quatorze cultivares de feijão foram avaliadas em nove experimentos conduzidos em Santa Maria, Estado do Rio Grande do Sul (latitude 29°42'S, longitude 53°49'W e 95m de altitude), nos anos agrícolas de 2000/2001 a 2004/2005. As avaliações foram constituídas por produtividade de grãos, número de vagens por planta, número de sementes por vagem, massa de cem grãos, população final de plantas, número de dias da emergência ao florescimento, número de dias da emergência à colheita, altura de inserção da primeira vagem, altura de inserção da última vagem, grau de acamamento e coloração do tegumento dos grãos. As estimativas dos coeficientes de repetibilidade foram obtidas por três métodos - análise de variância, componentes principais e análise estrutural. Sete experimentos possibilitam a identificação de cultivares superiores de feijão em relação às características de produção, de fenologia e de morfologia, com 85% de exatidão no prognóstico de seu valor real.

Shade level effects on yield and chemical composition of the leaf essential oil of Pothomorphe umbellata (L.) Miquel

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Genetics of anthracnose panel canker disease resistance and its relationship with yield and growth characters in half-sib progenies of rubber tree (Hevea brasiliensis)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Biomass production and chemical composition of Lippia alba (Mill.) NEBr. ex Britt & Wilson in leaves on different plant parts in different seasons

Lippia alba, family Verbenaceae, is widely spread in Central and South American. It's a shurb with a quadrangular branch reaching 1,7m tall. The leaves are membranaceous, petiolate, pubescent with a strong flavor. It's limbs have variable forms with pointed apex, cuneiform or decumbent base, and serrated or crenated hordes. It was determined the best harvest season to biomass production, essential oil content and chemical composition, on different plant parts (apical, medium, basal). It has been observed that, both apical and medium parts represented around 80 % of the fresh leaf mass. The foliar biomass yields are about 5 ton/ha in four harvests during an year. The average yield of essential oil considering the three plant parts were 0.15%, 0.47%, 0.46%, 0.55% and 0.61% for summer/98, autumn/98, winter/98, spring/98 and summer/99, respectively. Essential oils showed similar chemical composition either in relation to seasonality, neral, geranial and t-cariofilene were the majority compounds.

Effect of doses of fungicides and plant resistance activators on the control of Rhizoctonia foliar blight of soybean, and on Rhizoctonia solani AG1-IA in vitro development

Rhizoctonia foliar blight (RFB) of soybean [Glycine max (L.) Merrill] occurs in many tropical and subtropical regions, causing yield reductions of up to 70% and in Brazil, up to 60%. The disease is caused by Rhizoetonia solani AG1-IA and AG1-IB, and by AG2-3 in Japan. RFB occurs in the North, Northeast and Mid-west regions of Brazil. Chemical control remains the only effective method of controlling RFB, but its efficiency depends upon environmental conditions. In this study, 18 fungicides, salicylic acid (SA) and acibenzolar-s-methyl (ASM) were evaluated on R. solani AG1-IA in vitro, by mycelial growth rating and estimating effective concentration for 50% (EC 50) and 90% (EC 90) inhibition of mycelial growth, and in vivo by reduction of disease severity on soybean plants in greenhouse conditions. Mycelial growth was strongly inhibited by the fungicides pyraclostrobin + boscalid and fludioxonil. Preventive fungicide applications were the most effective. Strobilurins were more efficient both in preventive and curative applications. Best results with plant resistance activators were obtained with SA (2.5 mM) sprayed at 20 d before inoculation and with ASM (12.5 mg a.i. l(-1)) 10 d before inoculation. (c) 2005 Elsevier Ltd. All rights reserved.