Ammonium Phosphate/Fly Ash Road Base Construction, HR-294, 1993

The objective of this research project was to evaluate the construction and service performance of ammonium phosphate/fly ash (APFA) treated base courses of crushed fines and/or unprocessed sand. Specific test results related to construction of the test sections were included in the 1987 construction report by Iowa State University. The performance of the experimental sections is dealt with in this final report. This 1986 project demonstrated that in all cases the control sections utilizing a Type B base experienced dramatically less cracking in the surface than the APFA treated base sections. The cost per mix and subsequent surface maintenance costs for the APFA base sections, especially those having a substantial amount of limestone, were higher than the Type B base control sections. This type of construction may prove to be economical only when petroleum product costs escalate.

Evaluation of the Chemical Durability of Iowa Fly Ash Concretes, HR-327, 1993

The major objective of this research project was to investigate how Iowa fly ashes influenced the chemical durability of portland cement based materials. Chemical durability has become an area of uncertainty because of the winter application of deicer salts (rock salts) that contain a significant amount of sulfate impurities. The sulfate durability testing program consisted of monitoring portland cement-fly ash paste, mortar and concrete test specimens that had been subjected to aqueous solutions containing various concentrations of salts (both sulfate and chloride). The paste and mortar specimens were monitored for length as a function of time. The concrete test specimens were monitored for length, relative dynamic modulus and mass as a function of time. The alkali-aggregate reactivity testing program consisted of monitoring the expansion of ASTM C311 mortar bar specimens that contained three different aggregates (Pyrex glass, Oreapolis and standard Ottawa sand). The results of the sulfate durability study indicated that the paste and concrete test specimens tended to exhibit surface spalling but only very slow expansive tendencies. This suggested that the permeability of the test specimens was controlling the rate of deterioration. Concrete specimens are still being monitored because the majority of the test specimens have expanded less than 0.05%; hence, this makes it difficult to estimate the service life of the concrete test specimens or to quantify the performance of the different fly ashes that were used in the study. The results of the mortar bar studies indicated that the chemical composition of the various fly ashes did have an influence on their sulfate resistance. Typically, Clinton and Louisa fly ashes performed the best, followed by the Ottumwa, Neal 4 and then Council Bluffs fly ashes. Council Bluffs fly ash was the only fly ash that consistently reduced the sulfate resistance of the many different mortar specimens that were investigated during this study. None of the trends that were observed in the mortar bar studies have yet become evident in the concrete phase of this project. The results of the alkali-aggregate study indicated that the Oreapolis aggregate is not very sensitive to alkali attack. Two of the fly ashes, Council Bluffs and Ottumwa, tended to increase the expansion of mortar bar specimens that contained the Oreapolis aggregate. However, it was not clear if the additional expansion was due to the alkali content of the fly ash, the periclase content of the fly ash or the cristobalite content of the fly ash, since all three of these factors have been found to influence the test results.

Fine Sand for Use in PC Concrete, MLR-88-6, 1989

In several locations of Iowa, it is becoming more difficult to produce concrete sand consistently at a reasonable cost. Both ASTM and AASHTO have specifications for concrete sands that allow a finer, poorer graded sand than Iowa specifications. The objective of the study was to develop standard mix designs to permit the use of finer graded sand for PC concrete. Three hundred cylinders were made from five sands available in the state. Based on the results of the study, the following are recommended: (1) Create another class of concrete sand by: (a) lowering the current mortar strength ratio from 1.5 to 1.3, (b) raising the allowance for the percent passing one sieve and retained on the next from 40 to 45, and (c) including a provision that 25 to 60 percent passing the number 30 sieve is required for the sand; and (2) Modify the standard paving mixes with and without fly ash for use with the finer sand as follows: (a) 8% more cement and fly ash for B-2 to B-5 mixes, (b) 7% more cement and fly ash for A-2 to A-5 mixes, and (c) 5% more cement and fly ash for C-2 to C-5 mixes and water reduced mixes.

Alkali Content of Fly Ash – Measuring and Testing Strategies for Compliance, TR-628, 2015

Sodium and potassium are the common alkalis present in fly ash. Excessive amounts of fly ash alkalis can cause efflorescence problems in concrete products and raise concern about the effectiveness of the fly ash to mitigate alkali-silica reaction (ASR). The available alkali test, which is commonly used to measure fly ash alkali, takes approximately 35 days for execution and reporting. Hence, in many instances the fly ash has already been incorporated into concrete before the test results are available. This complicates the job of the fly ash marketing agencies and it leads to disputes with fly ash users who often are concerned with accepting projects that contain materials that fail to meet specification limits. The research project consisted of a lab study and a field study. The lab study focused on the available alkali test and how fly ash alkali content impacts common performance tests (mortar-bar expansion tests). Twenty-one fly ash samples were evaluated during the testing. The field study focused on the inspection and testing of selected, well documented pavement sites that contained moderately reactive fine aggregate and high-alkali fly ash. A total of nine pavement sites were evaluated. Two of the sites were control sites that did not contain fly ash. The results of the lab study indicated that the available alkali test is prone to experimental errors that cause poor agreement between testing labs. A strong (linear) relationship was observed between available alkali content and total alkali content of Class C fly ash. This relationship can be used to provide a quicker, more precise method of estimating the available alkali content. The results of the field study failed to link the use of high-alkali fly ash with the occurrence of ASR in the various concrete sites. Petrographic examination of the pavement cores indicated that Wayland sand is an ASR-sensitive aggregate. This was in good agreement with Iowa DOT field service records. It was recommended that preventative measures should be used when this source of sand is used in concrete mixtures.

Biology and parasitic potential of Doryctobracon areolatuson Anastrepha fraterculus larvae

The objective of this work was to study the biology and parasitic potential of Doryctobracon areolatus on larvae of Anastrepha fraterculus. The egg-adult period, the sex ratio, the longevity, the pupal viability, and the parasitism rate of D. areolatus were determined in laboratory, using A. fraterculus as host. The parasitoid development from oviposition to adult emergence required 25.00±1.70 days, the sex ratio was 0.62±0.09, and the mean longevity was 16.36±3.62 days for males and 10.24±1.71 days for females. The mean parasitism rate was 53.50±8.93%, varying from 41.60 to 68.60%, which shows the potential of this parasitoid for biological control of A. fraterculus.

Ammonium Phosphate/Fly Ash Road Base Construction, HR-294, Construction Report, 1987

The objective of this research project was to evaluate the construction and service performance of ammonium phosphate/fly ash (APFA) treated base courses of crushed fines and/or unprocessed sand. Specific test results related to construction of the test sections were included in the 1987 construction report by Iowa State University. The performance of the experimental sections is dealt with in this final report. This 1986 project demonstrated that in all cases the control sections utilizing a Type B base experienced dramatically less cracking in the surface than the APFA treated base sections. The cost per mix and subsequent surface maintenance costs for the APFA base sections, especially those having a substantial amount of limestone, were higher than the Type B base control sections. This type of construction may prove to be economical only when petroleum product costs escalate.

First survey of fruit fly (Diptera: Tephritidae) and parasitoid diversity among myrtaceae fruit across the state of Bahia, Brazil

The objective of this study was to evaluate the diversity of fruit fly (Diptera: Tephritidae) species that use myrtaceous fruit, particularly guava, as hosts in several localities in the state of Bahia and to determine the infestation rates, pupal viability rates, and fruit fly-parasitoid associations. Sampling of myrtaceous fruit was carried out in 24 municipalities in different regions in the state of Bahia. Four fruit fly species, Anastrepha fraterculus, Anastrepha zenildae, Anastrepha sororcula, and Ceratitis capitata were obtained from the collected fruit. Three parasitoid species (Hymenoptera: Braconidae) emerged from Anastrepha larvae/pupae, Doryctobracon areolatus, Utetes anastrephae, and Asobara anastrephae. Doryctobracon areolatus emerged from A. fraterculus, A. sororcula and A. zenildae; Utetes anastrephae emerged from A. fraterculus and A. zenildae; and Asobara anastrephae emerged from A. fraterculus. Fruit fly and myrtaceous fruit associations are reported for the first time in several municipalities in the state of Bahia. A. zenildae was found infesting Syzygium malaccense for the first time in Brazil.

Sugarcane stems as larval habitat for the stable fly (Stomoxys calcitrans) in sugarcane plantations

Outbreaks of stable fly, Stomoxys calcitrans, cause losses for livestock producers located near sugarcane mills in Brazil, especially in southern Mato Grosso do Sul. The sugarcane mills are often pointed by local farmers as the primary source of these outbreaks; some mills also joined the farmers in combating the flies. Brazilian beef cattle production has great economic importance in similar level to bio-fuel production as ethanol. In this context, the wide-ranging knowledge on the biology and ecology of the stable fly, including larval habitats and their reproduction sites is extremely important for further development of control programs. This paper aims to report the occurrence and development of S. calcitrans larvae inside sugarcane stems in three municipalities of Mato Grosso do Sul. The sugarcane stems give protection against bad weather conditions and insecticide application. In this way, for sustainable sugarcane growth specific research concerning this situation should be conducted.

The effect of feeding regime on larval black fly (Diptera: simuliidae) primary head fan ray number

Identification of larval simuliids has always been difficult due to the morphological similarity many species bear to one another. For this reason all characters available have been drawn upon to aid in species identification, including head fan ray number. Even in light of an increasing body of anecdotal reports that head fan ray number is not fixed, it has continued to be used to aid species identification. In the current experiment simuliid larvae were reared under controlled laboratory conditions to last instar in one of three feeding regimes. Out of nine trials, the results of six showed a significant inverse relationship between feeding regime and head fan ray number. In addition to the laboratory experiments, larvae were also collected from the field over the course of the spring and summer, 1994. From these samples significant interspecific and intraspecific variations in head fan ray number were found both spatially and temporally within Algonquin Park. From these data it is concluded that head fan ray number for the species analysed is a developmentally plastic character, which varies in response to food availability. Furthermore, given the extreme variations in head fan ray number found in some species, I recommend that head fan ray number not be used as an aid to identification unless it can be shown to be a fixed character for the species in question.

An investigation into the effects of homopteran honeydew sugars versus floral nectar sugars on black fly longevity, flight performance and digestion /

Floral nectar is thought to be the primary carbohydrate source for most dipteran species. However, it has been shown that black flies (Burgin & Hunter 1997 a,b,c), mosquitoes (Foster 1995; Burkett et al. 1999; Russell & Hunter 2002), deer flies (Magnarelli & Burger 1984; Janzen & Hunter 1998; Ossowski & Hunter 2000), horse flies (Schutz & Gaugler 1989; Hunter & Ossowski 1999) and sand flies (MacVicker et al. 1990; Wallbanks et al. 1990; Cameron et al. 1992, 1995; Schlein & Jacobson 1994, 1999; Hamilton & EI Naiem 2000) feed on homopteran honeydew as well as floral nectar. Prior to 1997 floral nectar was thought to be the main source of carbohydrates for black flies. However, Burgin & Hunter (1 997a) demonstrated that up to 35% of black flies had recently consumed meals of homo pte ran honeydew. This information has necessitated a re-assessment of many life history aspects of black flies. Attempts are being made to examine the effects of nectar versus honeydew on black fly fecundity and parasite transmission (Hazzard 2003). Recently, Stanfield and Hunter (unpublished data) have shown that in female black flies, honeydew sugars produce flights of longer distance and duration than do nectar sugars. This thesis examines two aspects of black fly biology as it relates to sugar meal consumption. First, the effects of honeydew and nectar on black fly longevity are examined. Second, the proximate causation behind longer flight performances in honeydew-fed flies will be examined. The comparison between these two sources is important because nectar is composed of mainly simple sugars (monosaccharides and disaccharides) whereas honeydew is composed of both simple and complex sugars (including trisaccharides and tetrasaccharides ).

Characterization of black fly (Diptera: Simuliidae) silk proteins

Black fly (Simuliidae) silk is produced by the larvae and pharate pupae and is used for anchorage and cocoon production. There exists limited information on simuliid silks, including protein composition and genetic sequences encoding such proteins. The present study aimed to expand what is known about simuliid silks by examining the silks of several simuliid species and by making comparisons to the silk of non-biting midges (Chironomidae). Silk glands were dissected out of larval and pupal simuliids, and protein contents were separated by sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) and visualized with silver stain. Protein contents were compared by mass in kilodaltons (kDa) between life stages and among species. Polymerase chain reaction (PCR) was used to expand upon known gene sequence information, and to determine the presence of genes homologous to chironomid silk. SDS-PAGE of cocoons revealed the presence of a 56 kDa and a 67 kDa protein. Silk gland contained as many as 28 different proteins ranging from 319 kDa to 8 kDa. Protein profiles vary among species, and group into large (>200), intermediate(>100), and small (<100) protein classes as is found in chironomids. It is likely that silk evolved in a common ancestor of simuliids and chironomids

Influence of temperature on the production and infectivity of entomopathogenic nematodes against larvae and pupae of vine weevil, Otiorhynchus sulcatus, (Coleoptera: Curculionidae)

Susceptibility of late instar vine weevil Otiorhynchus sulcatus larvae and pupae to four species entomopathogenic nematodes were tested. Bioassays on production and infectivity to larvae and pupae were compared for two steinernematids and two heterorhabditis such as Steinernema carpocapsae, S. feltiae, Heterorhabditis indica and H. bacteriophora. Nematodes production of all species was determined by the number infective juveniles (IJs) established in vine weevil larvae and pupae O. sulcatus using sand and filter paper bioassay. S. feltiae produced the maximum number in larvae and pupae at 20°C as compared to other nematodes but production of H. indica, was better at 25°C in larvae and pupae followed by H. bacteriophora, S. carpocapsae and Infectivity test of larvae and pupae was also done in sand media. Infective juveniles recovered from larvae and pupae when infected with S. feltiae produced maximum infective juveniles at 20°C temperatures than all other isolates. H. bacteriophora produced higher number of IJs in larvae and pupae than all other nematode isolates at 25°C. This paper indicates the application of nematodes with the knowledge of insect pest biology represents a possible new strategy for O. sulcatus larvae and pupae.

Pathogenicity of the bacterium Pseudomonas putida from the entomopathogenic nematode Steinernema abbasi and its secretion against Galleria mellonella larvae

The Entomopathogenic bacterium Pseudomonas putida from Steinernema abbasi and its metabolic secretions were lethal to the Galleria mellonella larvae. Different laboratory experiments on time interval, substrate, moisture, temperature, dose, penetration of cells, stored and dried metabolites were conducted in sand and filter paper bioassays. It was concluded that death was probably due to the toxic metabolites. This bacterium and its metabolites were found very effective at 30 degree C. Penetration of bacterium was rapid after application on G. mellonella larvae. P. putida cells were recovered from the haemocoele when suspensions containing bacterial cells were applied to the G. mellonella indicating that bacterial symbionts do have a free-living existence and can enter the haemocoele in the absence of nematode vector. Stored metabolite and dried metabolites were found persistent for long time. This bacterium or its toxic secretions can be used for insect control that can be important component of integrated pest management against different insect pests. P. putida and its secretions are suggested as the most appropriate suspension to apply against insect pest control program in tropical ecological regions.

Pathogenicity of the bacterium Xenorhabdus nematophila isolated from the entomopathogenic nematode Steinernema carpocapsae and its secretions against Galleria mellonella larvae

The entomopathogenic bacterium, Xenorhabdus nematophila was isolated from the hemolymph of Galleria mellonella infected with Steinernema carpocapsae. The bacterial cells and its metabolic secretions have been found lethal to the Galleria larvae. Toxic secretion in broth caused 95% mortality within 4 d of application whereas the bacterial cells caused 93% mortality after 6 d. When filter and sand substrates were compared, the later one was observed as appropriate. Similarly, bacterial cells and secretion in broth were more effective at 14% moisture and 25 °C temperature treatments. Maximum insect mortality (100%) was observed when bacterial concentration of 4×106 cells/ml was used. Similarly, maximum bacterial cells in broth (95%) were penetrated into the insect body within 2 h of their application. However, when stored bacterial toxic secretion was applied to the insects its efficacy declined. On the other hand, when the same toxic secretion was dried and then dissolved either in broth or water was proved to be effective. The present study showed that the bacterium, X. nematophila or its toxic secretion can be used as an important component of integrated pest management against Galleria.

Virulence of entomopathogenic bacteria Xenorhabdus bovienii and Photorhabdus luminescens against Galleria mellonella larvae

Keeping in view the serious health and environmental apprehensions associated with the use of pesticides, entomopathogenic symbiotic bacteria have the potential to supersede pesticides for the management of various pests. Lab experiments were conducted to test the toxicity of two bacteria Xenorhabdus bovienii and Photorhabdus luminescens at different bacterial concentrations against Galleria mellonella larvae and influence of different abiotic factors viz.: substrates, temperatures and moisture levels were ascertained on the efficacy of these bacteria. P. luminescens and X. bovienii caused the maximum mortality (99 and 90%, respectively) at a concentration of 4 x 107 cells/ml. Mortality caused by P. luminescens was significantly higher than that of X. bovienii. Highest mortality was observed on sand as compared to filter paper. A temperature of 30oC and a moisture level of 20 % were found optimum for the maximum mortality.