Search for top-squark pair production in the single-lepton final state in pp collisions at

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Evidence for the 125 GeV Higgs boson decaying to a pair of tau leptons

A search for a standard model Higgs boson decaying into a pair of tau leptons is performed using events recorded by the CMS experiment at the LHC in 2011 and 2012. The dataset corresponds to an integrated luminosity of 4.9 fb(-1) at a centre-of-mass energy of 7 TeV and 19.7 fb(-1) at 8 TeV. Each tau lepton decays hadronically or leptonically to an electron or a muon, leading to six different final states for the tau-lepton pair, all considered in this analysis. An excess of events is observed over the expected background contributions, with a local significance larger than 3 standard deviations for m (H) values between 115 and 130 GeV. The best fit of the observed H -> tau tau signal cross section times branching fraction for m(H) = 125 GeV is 0.78 +/- 0.27 times the standard model expectation. These observations constitute evidence for the 125 GeV Higgs boson decaying to a pair of tau leptons.

Search for pair production of excited top quarks in the lepton plus jets final state

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Search for a non-standard-model Higgs boson decaying to a pair of new light bosons in four-muon final states

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Search for the associated production of the Higgs boson with a top-quark pair

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Measurement of prompt J/psi pair production in pp collisions at root s = 7 Tev

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Search for neutral MSSM Higgs bosons decaying to a pair of tau leptons in pp collisions

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Search for pair production of third-generation scalar leptoquarks and top squarks in proton-proton collisions at v root s=8 TeV

A search for pair production of third-generation scalar leptoquarks and supersymmetric top quark partners, top squarks, in final states involving tau leptons and bottom quarks is presented. The search uses events from a data sample of proton-proton collisions corresponding to an integrated luminosity of 19.7 fb(-1), collected with the CMS detector at the LHC with root s = 8 TeV. The number of observed events is found to be in agreement with the expected standard model background. Third-generation scalar leptoquarks with masses below 740 GeV are excluded at 95% confidence level, assuming a 100% branching fraction for the leptoquark decay to a tau lepton and a bottom quark. In addition, this mass limit applies directly to top squarks decaying via an R-parity violating coupling. lambda(') (333). The search also considers a similar signature from top squarks undergoing a chargino-mediated decay involving the Rparity violating coupling. lambda(')(3jk). Each top squark decays to a tau lepton, a bottom quark, and two light quarks. Top squarks in this model with masses below 580 GeV are excluded at 95% confidence level. The constraint on the leptoquark mass is the most stringent to date, and this is the first search for top squarks decaying via. lambda(')(3jk). (C) 2014 The Authors. Published by Elsevier B. V.

Semiautomatic object-space road extraction combining a stereoscopic image pair and a TIN-Based DTM

In this letter, a semiautomatic method for road extraction in object space is proposed that combines a stereoscopic pair of low-resolution aerial images with a digital terrain model (DTM) structured as a triangulated irregular network (TIN). First, we formulate an objective function in the object space to allow the modeling of roads in 3-D. In this model, the TIN-based DTM allows the search for the optimal polyline to be restricted along a narrow band that is overlaid upon it. Finally, the optimal polyline for each road is obtained by optimizing the objective function using the dynamic programming optimization algorithm. A few seed points need to be supplied by an operator. To evaluate the performance of the proposed method, a set of experiments was designed using two stereoscopic pairs of low-resolution aerial images and a TIN-based DTM with an average resolution of 1 m. The experimental results showed that the proposed method worked properly, even when faced with anomalies along roads, such as obstructions caused by shadows and trees.

Search for a standard model Higgs boson produced in association with a top-quark pair and decaying to bottom quarks using a matrix element method

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Measurement of top quark-antiquark pair production in association with a W or Z boson in pp collisions at root s=8 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Measurement of differential cross sections for the production of a pair of isolated photons in pp collisions at root s=7TeV

A measurement of differential cross sections for the production of a pair of isolated photons in proton-proton collisions at root s = 7 TeV is presented. The data sample corresponds to an integrated luminosity of 5.0 fb(-1) collected with the CMS detector. A data-driven isolation template method is used to extract the prompt diphoton yield. The measured cross section for two isolated photons, with transverse energy above 40 and 25 GeV respectively, in the pseudorapidity range vertical bar eta vertical bar < 2.5, vertical bar eta vertical bar (sic) [1.44, 1.57] and with an angular separation Delta R > 0.45, is 17.2 +/-0.2 (stat) +/-1.9 (syst) +/- 0.4 (lumi) pb. Differential cross sections are measured as a function of the diphoton invariant mass, the diphoton transverse momentum, the azimuthal angle difference between the two photons, and the cosine of the polar angle in the Collins-Soper reference frame of the diphoton system. The results are compared to theoretical predictions at leading, next-to-leading, and next-to-next-to-leading order in quantum chromodynamics.

Inward-Inclined Implant Platform for the Amplified Platform-Switching Concept: 18-Month Follow-up Report of a Prospective Randomized Matched-Pair Controlled Trial

Purpose: This prospective randomized matched-pair controlled trial aimed to evaluate marginal bone levels and soft tissue alterations at implants restored according to the platform-switching concept with a new inward-inclined platform and compare them with external-hexagon implants. Materials and Methods: Traditional external-hexagon (control group) implants and inward-inclined platform implants (test group), all with the same implant body geometry and 13 mm in length, were inserted in a standardized manner in the posterior maxillae of 40 patients. Radiographic bone levels were measured by two independent examiners after 6, 12, and 18 months of prosthetic loading. Buccal soft tissue height was measured at the time of abutment connection and 18 months later. Results: After 18 months of loading, all 80 implants were clinically osseointegrated in the 40 participating patients. Radiographic evaluation showed mean bone losses of 0.5 +/- 0.1 mm (range, 0.3 to 0.7 mm) and 1.6 +/- 0.3 mm (range, 1.1 to 2.2 mm) for test and control implants, respectively. Soft tissue height showed a significant mean decrease of 2.4 mm in the control group, compared to 0.6 mm around the test implants. Conclusions: After 18 months, significantly greater bone loss was observed at implants restored according to the conventional external-hexagon protocol compared to the platform-switching concept. In addition, decreased soft tissue height was associated with the external-hexagon implants versus the platform-switched implants. INT J ORAL MAXILLOFAC IMPLANTS 2012;27:927-934.

Remarks on the classification of a pair of commuting semilinear operators

Gelfand and Ponomarev [I.M. Gelfand, V.A. Ponomarev, Remarks on the classification of a pair of commuting linear transformations in a finite dimensional vector space, Funct. Anal. Appl. 3 (1969) 325-326] proved that the problem of classifying pairs of commuting linear operators contains the problem of classifying k-tuples of linear operators for any k. We prove an analogous statement for semilinear operators. (C) 2011 Elsevier Inc. All rights reserved.

Wh plus missing-E-T signature from gaugino pair production at the LHC

In SUSY models with heavy squarks and gaugino mass unification, the gaugino pair production reaction pp -> (W) over tilde (+/-)(1)(Z) over tilde (2) dominates gluino pair production for m (g) over tilde less than or similar to 1 TeV at LHC with root s = 14 TeV (LHC14). For this mass range, the two-body decays (W) over tilde (1) -> W (Z) over tilde (1) and (Z) over tilde (2) -> h (Z) over tilde (1) are expected to dominate the chargino and neutralino branching fractions. By searching for lb (b) over tilde + is not an element of(T) events from (W) over tilde (+/-)(1)Z(2) production, we show that LHC14 with 100 fb(-1) of integrated luminosity becomes sensitive to chargino masses in the range m((W) over tilde1) similar to 450-550 GeV corresponding to m (g) over tilde similar to 1.5-2 TeV in models with gaugino mass unification. For 10(3) fb(-1), LHC14 is sensitive to the Wh channel for m((W) over tilde1) similar to 300-800 GeV, corresponding to m (g) over tilde similar to 1-2.8 TeV, which is comparable to the reach for gluino pair production followed by cascade decays. The Wh + is not an element of(T) search channel opens up a new complementary avenue for SUSY searches at LHC, and serves to point to SUSYas the origin of any new physics discovered via multijet and multilepton + is not an element of(T) channels.