Short-term secular change in height, body mass and Tanner-Whitehouse 3 skeletal maturity of Madeira youth, Portugal

Secular trends in height and weight are reasonably well documented in Europe. Corresponding observations for skeletal maturation are lacking. Aim: To assess secular trends in height, body mass and skeletal maturity of Portuguese children and adolescents and to provide updated reference values for skeletal maturity scores (SMSs). Subjects and methods: Data for 2856 children and adolescents of 4–17 years, 1412 boys and 1444 girls, from The ‘Madeira Growth Study’ (MGS; 1996–1998) and from the‘Healthy Growth of Madeira Children Study’ (CRES; 2006) were used. Height and body mass were measured. Skeletal maturity was assessed with the Tanner-Whitehouse 2 and 3 methods. Results: Children from CRES were taller and heavier than peers from MGS. Differences in height reached 5.8cm in boys and 5.5cm in girls. RUS SMSs did not differ consistently between surveys boys, while higher RUS scores were observed in CRES girls. Adult RUS SMSs for MGS and CRES combined were attained at 15.8 years in boys and 14.8 years in girls. Corresponding ages for adult Carpal SMSs were 14.4 and 14.0, respectively. Conclusion: The short-term trends for height and mass were not entirely consistent with the trends in RUS and Carpal SMSs and SAs.

Length at first maturity of two species of lantern sharks (Etmopterus spinax and Etmopterus pusillus) off southern Portugal

Etmoplerus spinax and Etmopterus pusillus are captured in large quantities in some deep-water fisheries along the Portuguesc coast and are always discarded. Specimens were collected from February 2003 to May 2004 from deep-water fisheries and classified as mature or immature. Maturity ogives were fitted and size at first maturity estimated for each sex of each of each species. Both species are late maturing, with the maturity size varying between 75% and 87% of the maximum observed sizes, depending on species and sex. For both species, females tended to mature at and grow to larger sizes than males. The late maturation of these deep-water shark species make these populations extremely vulnerable to increasing fishing mortality.

Size at maturity and length-weight relationships of the blurred lantern shark Etmopterus bigelowi (Squaliformes: Etmopteridae) caught off southeastern Brazil

The blurred lantern shark Etmopterus bigelowi, a deep-water squaloid shark, is globally widespread in temperate and tropical waters, but there is little available information about its biology owing to its relative rarity of capture and taxonomic confusion with its sibling species Etmopterus pusillus. Specimens used in this study were collected from July to December 2004 as by-catch in the commercial deepwater trawl fishery targeting red shrimp Aristaeomorpha foliacea in the southwestern Atlantic. We examined 55 specimens (22 males and 33 females) ranging in total length (TL) from 31.5 to 73 cm and in total weight from 103 to 1600 g. Length-weight relationships were explored for each sex and significant differences were found in the slope coefficients of the male and female regressions. The size at maturity for each sex was evaluated fitting a logistic regression. Females matured at larger sizes than males, with estimated sizes at first maturity of 56.0 cm TL for females and 45.1 cm TL for males. The present study provides important preliminary information about E. bigelowi that can be incorporated in risk assessment and stock assessment models, essential for efficient management practices aimed at avoiding overexploitation of these vulnerable deep-sea sharks.

Skeletal maturity and socio-economic status in portuguese children and youths: the Madeira growth study

Skeletal maturity is used to evaluate biological maturity status. Information about the association between socio-economic status (SES) and skeletal maturity is limited in Portugal. Aims: The aim of this study is to document the skeletal maturity of youths in Madeira and to evaluate variation in maturity associated with SES. Subjects and methods: The study involved 507 subjects (256 boys and 251 girls) from the Madeira Growth Study, a mixed-longitudinal study of five cohorts (8, 10, 12, 14 and 16 years of age) followed at yearly intervals over 3 years (1996–1998). A total of 1493 observations were made. Skeletal age was estimated from radiographs of the hand and wrist using the Tanner–Whitehouse 2 method (TW2). Social class rankings were based on Graffar’s (1956) method. Five social rankings were subsequently grouped into three SES categories: high, average and low. Results: Median for the radius, ulna and short finger bones (RUS scores) in the total sample of boys and girls increased curvilinearly across age whereas median for the 7 (without pisiform) carpal bones (Carpal scores) increased almost linearly. The 20-bone maturity scores demonstrated distinctive trends by gender: the medians for boys increased almost linearly while the medians for girls increased curvilinearly. SES differences were minimal. Only among children aged 10–11 years were high SES boys and girls advanced in skeletal maturity. Madeira adolescents were advanced in skeletal maturity compared with Belgian reference values. Conclusion: The data suggests population variation in TW2 estimates of skeletal maturation. Skeletal maturity was not related to SES in youths from Madeira.

Short-term secular change in height, body mass and Tanner-Whitehouse 3 skeletal maturity of Madeira youth, Portugal

Secular trends in height and weight are reasonably well documented in Europe. Corresponding observations for skeletal maturation are lacking. Aim: To assess secular trends in height, body mass and skeletal maturity of Portuguese children and adolescents and to provide updated reference values for skeletal maturity scores (SMSs). Subjects and methods: Data for 2856 children and adolescents of 4–17 years, 1412 boys and 1444 girls, from The ‘Madeira Growth Study’ (MGS; 1996–1998) and from the‘Healthy Growth of Madeira Children Study’ (CRES; 2006) were used. Height and body mass were measured. Skeletal maturity was assessed with the Tanner-Whitehouse 2 and 3 methods. Results: Children from CRES were taller and heavier than peers from MGS. Differences in height reached 5.8cm in boys and 5.5cm in girls. RUS SMSs did not differ consistently between surveys boys, while higher RUS scores were observed in CRES girls. Adult RUS SMSs for MGS and CRES combined were attained at 15.8 years in boys and 14.8 years in girls. Corresponding ages for adult Carpal SMSs were 14.4 and 14.0, respectively. Conclusion: The short-term trends for height and mass were not entirely consistent with the trends in RUS and Carpal SMSs and SAs.

Maturity index and cold storage effects on postharvest quality of 'Packham's Triumph' and 'Rocha' pears.

Pears have been grown in the south region of Brazil, where the climatic conditions are favourable. The aim of this work was to determine the harvest maturity index as well as maximum storage period of 'Packham's Triumph? and 'Rocha' pears to maintain quality attributes. The ?Packham?s Triumph? fruit were harvested from a commercial orchard at 7 days intervals and flesh firmness was used as a maturity index (MI1=76, MI2=67 and MI3=58 N). ?Rocha? pears were harvested twice and they were considered as MI1 and MI3 because of the firmness values. The fruit were stored at 1±1C and 90-95% RH for 15, 30, 45 and 60 days and evaluated at the end of each storage period and after five days at room temperature (24±1C), simulating a helflife period. Flesh firmness, water loss, peduncle dehydration, epidermis colour, soluble solids, titratable acidity were measured. ?Packham?s? pears harvested at MI1 and MI2 showed firmness loss after 30 days of cold storage, whereas fruit harvested at MI3 retained the initial values, resulting in firmer fruit after 60 days (P<0.001). Fruit harvested in MI3 had less firmness loss after 5 days at room temperature following 45 and 60 days of cold storage. ?Rocha? pears harvested in MI1 and MI3 showed firmness reduction during cold storage, which was intensified at room temperature. Maximum values of water loss approached 6%. Fruit peduncles of both cultivars dehydrated after 60 days of cold storage, but their colour remained green, independent of harvest maturity index. ?Packham?s Triumph? and ?Rocha? pears harvested at MI3 showed better quality attributes after 60 days of cold storage plus 5 days of shelf-life than fruit harvested at other maturity stages.

Using ontology for the representational analysis of process modelling techniques

Selecting an appropriate business process modelling technique forms an important task within the methodological challenges of a business process management project. While a plethora of available techniques has been developed over the last decades, there is an obvious shortage of well-accepted reference frameworks that can be used to evaluate and compare the capabilities of the different techniques. Academic progress has been made at least in the area of representational analyses that use ontology as a benchmark for such evaluations. This paper reflects on the comprehensive experiences with the application of a model based on the Bunge ontology in this context. A brief overview of the underlying research model characterizes the different steps in such a research project. A comparative summary of previous representational analyses of process modelling techniques over time gives insights into the relative maturity of selected process modelling techniques. Based on these experiences suggestions are made as to where ontology-based representational analyses could be further developed and what limitations are inherent to such analyses.

E-business adoption in construction : international review on impediments

The adoption of e-business by the Australian construction industry lags other service and product industries. It is assumed that slow adoption rate does not reflect the maturity of the technology but is due to adoption impediments peculiar to the nature of construction. This chapter examines impediments to the uptake of e-business nationally and internationally. A systematic and extensive literature search of impediments (also referred to as obstacles, impediments or hindrances) to adoption has been undertaken and the findings discussed in this chapter. This review included more that 200 documents and these have been published in a searchable database as part of a larger research initiative funded by the Cooperative Research Centre for Construction Innovation. The influence of levels of e-business maturity seen in other sectors such as retail, tourism and manufacturing was also captured and a number of major impediments were identified some including: privacy, trust, uncertainty of financial returns, lack of reliable measurement, fraud, lack of support and system maintenance. A total of 23 impediments were assessed in terms of impact to organisational type and size across reviewed documents. With this information it was possible to develop a reference framework for measuring maturity levels and readiness to uptake e-business in construction. Results have also shown that impediments to e-business adoption work differently according to organisational type and culture. Areas of training and people development need to be addressed. This would include a more sensitive approach to the nature of construction organisations, especially to those small and medium enterprises. Raising levels of awareness and creating trust for on-line collaboration are other aspects that need attention, which current studies confirm as lacking. An empirical study within construction, to validate these findings, forms the subsequent phase of this research.

Barriers to e-business adoption in construction: international literature review

The adoption of e-business by the Australian construction industry lags other service and product industries. It is assumed that slow adoption rate does not reflect the maturity of the technology but is due to adoption barriers peculiar to the nature of construction. This paper examines impediments to the uptake of e-business nationally and internationally. A systematic and extensive literature search of barriers (also referred to as obstacles, impediments or hindrances) to adoption has been undertaken and the findings discussed in this paper. This review included more that 200 documents and these have been published in a searchable database as part of a larger research initiative funded by the Cooperative Research Centre for Construction Innovation. The influence of levels of e-business maturity seen in other sectors such as retail, tourism and manufacturing was also captured and a number of major barriers were identified some including: privacy, trust, uncertainty of financial returns, lack of reliable measurement, fraud, lack of support and system maintenance. A total of 23 barriers were assessed in terms of impact to organisational type and size across reviewed documents. With this information it was possible to develop a reference framework for measuring maturity levels and readiness to uptake e-business in construction. Results have also shown that barriers to e-business adoption work differently according to organisational type and culture. Areas of training and people development need to be addressed. This would include a more sensitive approach to the nature of construction organisations, especially to those small and medium enterprises. Raising levels of awareness and creating trust for on-line collaboration are other aspects that need attention, which current studies confirm as lacking. An empirical study within construction, to validate these findings, forms the subsequent phase of this research.

Lateral bone density variations in the scoliotic spine

Adolescent Idiopathic Scoliosis (AIS) is the most common deformity of the spine, affecting 2-4% of the population. Previous studies have shown that the vertebrae in scoliotic spines undergo abnormal shape changes, however there has been little exploration of how scoliosis affects bone density distribution within the vertebrae. In this study, existing CT scans of 53 female idiopathic scoliosis patients with right-sided main thoracic curves were used to measure the lateral (right to left) bone density profile at mid-height through each vertebral body. Five key bone density profile measures were identified from each normalised bone density distribution, and multiple regression analysis was performed to explore the relationship between bone density distribution and patient demographics (age, height, weight, body mass index (BMI), skeletal maturity, time since Menarche, vertebral level, and scoliosis curve severity). Results showed a marked convex/concave asymmetry in bone density for vertebral levels at or near the apex of the scoliotic curve. At the apical vertebra, mean bone density at the left side (concave) cortical shell was 23.5% higher than for the right (convex) cortical shell, and cancellous bone density along the central 60% of the lateral path from convex to concave increased by 13.8%. The centre of mass of the bone density profile at the thoracic curve apex was located 53.8% of the distance along the lateral path, indicating a shift of nearly 4% toward the concavity of the deformity. These lateral bone density gradients tapered off when moving away from the apical vertebra. Multi-linear regressions showed that the right cortical shell peak bone density is significantly correlated with skeletal maturity, with each Risser increment corresponding to an increase in mineral equivalent bone density of 4-5%. There were also statistically significant relationships between patient height, weight and BMI, and the gradient of cancellous bone density along the central 60% of the lateral path. Bone density gradient is positively correlated with weight, and negatively correlated with height and BMI, such that at the apical vertebra, a unit decrease in BMI corresponds to an almost 100% increase in bone density gradient.

Bubble geometry and chaotic pricing behaviour

This paper is a deductive theoretical enquiry into the flow of effects from the geometry of price bubbles/busts, to price indices, to pricing behaviours of sellers and buyers, and back to price bubbles/busts. The intent of the analysis is to suggest analytical approaches to identify the presence, maturity, and/or sustainability of a price bubble. We present a pricing model to emulate market behaviour, including numeric examples and charts of the interaction of supply and demand. The model extends into dynamic market solutions myopic (single- and multi-period) backward looking rational expectations to demonstrate how buyers and sellers interact to affect supply and demand and to show how capital gain expectations can be a destabilising influence – i.e. the lagged effects of past price gains can drive the market price away from long-run market-worth. Investing based on the outputs of past price-based valuation models appear to be more of a game-of-chance than a sound investment strategy.

Improving the Traversal of Large Hierarchical Process Repositories

Business Process Management (BPM) has increased in popularity and maturity in recent years. Large enterprises engage use process management approaches to model, manage and refine repositories of process models that detail the whole enterprise. These process models can run to the thousands in number, and may contain large hierarchies of tasks and control structures that become cumbersome to maintain. Tools are therefore needed to effectively traverse this process model space in an efficient manner, otherwise the repositories remain hard to use, and thus are lowered in their effectiveness. In this paper we analyse a range of BPM tools for their effectiveness in handling large process models. We establish that the present set of commercial tools is lacking in key areas regarding visualisation of, and interaction with, large process models. We then present six tool functionalities for the development of advanced business process visualisation and interaction, presenting a design for a tool that will exploit the latest advances in 2D and 3D computer graphics to enable fast and efficient search, traversal and modification of process models.

Conceptualisation and facilitation of SOA governance

As organisations strive to improve their capabilities in the areas of Service Management and Service-oriented Architectures (SOA), SOA Governance is becoming an increasingly important success factor. However, the concept of SOA Governance is complex and not well-understood, and the adoption of an adequate SOA Governance approach in an organisation can be difficult. Tools that support SOA Governance mostly have a technical bias and rarely address organisational aspects. In this paper, we contribute to the field by specifying a conceptual meta model for SOA Governance that integrates the structure of major IT and SOA Governance frameworks into one consolidated view. By presenting this conceptualisation and a corresponding prototypical implementation of a tool that supports SOA Governance maturity assessment, reference framework exploration and company-specific tailoring of SOA Governance, we provide insights into the first step of a Design Science research project, i.e. the development of an important IT artefact.

Creating an asset registry for railway electrical traction equipment with open standards

An asset registry arguably forms the core system that needs to be in place before other systems can operate or interoperate. Most systems have rudimentary asset registry functionality that store assets, relationships, or characteristics, and this leads to different asset management systems storing similar sets of data in multiple locations in an organisation. As organisations have been slowly moving their information architecture toward a service-oriented architecture, they have also been consolidating their multiple data stores, to form a “single point of truth”. As part of a strategy to integrate several asset management systems in an Australian railway organisation, a case study for developing a consolidated asset registry was conducted. A decision was made to use the MIMOSA OSA-EAI CRIS data model as well as the OSA-EAI Reference Data in building the platform due to the standard’s relative maturity and completeness. A pilot study of electrical traction equipment was selected, and the data sources feeding into the asset registry were primarily diagrammatic based. This paper presents the pitfalls encountered, approaches taken, and lessons learned during the development of the asset registry.