Behaviour and strength of hollow flange channel sections under torsion and bending

Hollow flange channel section is a cold-formed high-strength and thin-walled steel section with a unique shape including two rectangular hollow flanges and a slender web. Due to its mono-symmetric characteristics, it will also be subjected to torsion when subjected to transverse loads in practical applications. Past research on steel beams subject to torsion has concentrated on open sections while very few steel design standards give suitable design rules for torsion design. Since the hollow flange channel section is different from conventional open sections, its torsional behaviour remains unknown to researchers. Therefore the elastic behaviour of hollow flange channel sections subject to uniform and non-uniform torsion, and combined torsion and bending was investigated using the solutions of appropriate differential equilibrium equations. The section torsion shear flow, warping normal stress distribution, and section constants including torsion constant and warping constant were obtained. The results were compared with those from finite element analyses that verified the accuracy of analytical solutions. Parametric studies were undertaken for simply supported beams subject to a uniformly distributed torque and a uniformly distributed transverse load applied away from the shear centre. This paper presents the details of this research into the elastic behaviour and strength of hollow flange channel sections subject to torsion and bending and the results.

Establishment and management of salt-tolerant amenity grasses to reduce urban salinity effect

This project built upon the successful outcomes of a previous project (TU02005) by adding to the database of salt tolerance among warm season turfgrass cultivars, through further hydroponic screening trials. Hydroponic screening trials focussed on new cultivars or cultivars that were not possible to cover in the time available under TU02005, including: 11 new cultivars of Paspalum vaginatum; 13 cultivars of Cynodon dactylon; six cultivars of Stenotaphrum secundatum; one accession of Cynodon transvaalensis; 12 Cynodon dactylon x transvaalensis hybrids; two cultivars of Sporobolus virginicus; five cultivars of Zoysia japonica; one cultivar of Z. macrantha, one common form of Z. tenuifolia and one Z. japonica x tenuifolia hybrid. The relative salinity tolerance of different turfgrasses is quantified in terms of their growth response to increasing levels of salinity, often defined by the salt level that equates to a 50% reduction in shoot yield, or alternatively the threshold salinity. The most salt tolerant species in these trials were Sporobolus virginicus and Paspalum vaginatum, consistent with the findings from TU02005 (Loch, Poulter et al. 2006). Cynodon dactylon showed the largest range in threshold values with some cultivars highly sensitive to salt, while others were tolerant to levels approaching that of the more halophytic grasses. Coupled with the observational and anecdotal evidence of high drought tolerance, this species and other intermediately tolerant species provide options for site specific situations in which soil salinity is coupled with additional challenges such as shade and high traffic conditions. By recognising the fact that a salt tolerant grass is not the complete solution to salinity problems, this project has been able to further investigate sustainable long-term establishment and management practices that maximise the ability of the selected grass to survive and grow under a particular set of salinity and usage parameters. Salt-tolerant turf grasses with potential for special use situations were trialled under field conditions at three sites within the Gold Coast City Council, while three sites, established under TU02005 within the Redland City Council boundaries were monitored for continued grass survival. Several randomised block experiments within Gold Coast City were established to compare the health and longevity of seashore paspalum (Paspalum vaginatum), Manila grass (Zoysia matrella), as well as the more tolerant cultivars of other species like buffalo grass (Stenotaphrum secundatum) and green couch (Cynodon dactylon). Whilst scientific results were difficult to achieve in the field situation, where conditions cannot be controlled, these trials provided valuable observational evidence of the likely survival of these species. Alternatives to laying full sod such as sprigging were investigated, and were found to be more appropriate for areas of low traffic as the establishment time is greater. Trials under controlled and protected conditions successfully achieved a full cover of Paspalum vaginatum from sprigs in a 10 week time frame. Salt affected sites are often associated with poor soil structure. Part of the research investigated techniques for the alleviation of soil compaction frequently found on saline sites. Various methods of soil de-compaction were investigated on highly compacted heavy clay soil in Redlands City. It was found that the heavy duplex soil of marine clay sediments required the most aggressive of treatments in order to achieve limited short-term effects. Interestingly, a well constructed sports field showed a far greater and longer term response to de-compaction operations, highlighting the importance of appropriate construction in the successful establishment and management of turfgrasses on salt affected sites. Fertiliser trials in this project determined plant demand for nitrogen (N) to species level. This work produced data that can be used as a guide when fertilising, in order to produce optimal growth and quality in the major turf grass species used in public parkland. An experiment commenced during TU02005 and monitored further in this project, investigated six representative warm-season turfgrasses to determine the optimum maintenance requirements for fertiliser N in south-east Queensland. In doing so, we recognised that optimum level is also related to use and intensity of use, with high profile well-used parks requiring higher maintenance N than low profile parks where maintaining botanical composition at a lower level of turf quality might be acceptable. Kikuyu (Pennisetum clandestinum) seemed to require the greatest N input (300-400 kg N/ha/year), followed by the green couch (Cynodon dactylon) cultivars ‘Wintergreen’ and ‘FLoraTeX’ requiring approximately 300 kg N/ha/year for optimal condition and growth. ‘Sir Walter’ (Stenotaphrum secundatum) and ‘Sea Isle 1’ (Paspalum vaginatum) had a moderate requirement of approximately 200 kg/ha/year. ‘Aussiblue’ (Digitaria didactyla)maintained optimal growth and quality at 100-200 kg N/ha/year. A set of guidelines has been prepared to provide various options from the construction and establishment of new grounds, through to the remediation of existing parklands by supporting the growth of endemic grasses. They describe a best management process through which salt affected sites should be assessed, remediated and managed. These guidelines, or Best Management Practices, will be readily available to councils. Previously, some high salinity sites have been turfed several times over a number of years (and Council budgets) for a 100% failure record. By eliminating this budgetary waste through targeted workable solutions, local authorities will be more amenable to investing appropriate amounts into these areas. In some cases, this will lead to cost savings as well as resulting in better quality turf. In all cases, however, improved turf quality will be of benefit to ratepayers, directly through increased local use of open space in parks and sportsfields and indirectly by attracting tourists and other visitors to the region bringing associated economic benefits. At the same time, environmental degradation and erosion of soil in bare areas will be greatly reduced.

Privacy architectures in social networks’ state-of-the-art survey

The use of social networking has exploded, with millions of people using various web- and mobile-based services around the world. This increase in social networking use has led to user anxiety related to privacy and the unauthorised exposure of personal information. Large-scale sharing in virtual spaces means that researchers, designers and developers now need to re-consider the issues and challenges of maintaining privacy when using social networking services. This paper provides a comprehensive survey of the current state-of-the-art privacy in social networks for both desktop and mobile uses and devices from various architectural vantage points. The survey will assist researchers and analysts in academia and industry to move towards mitigating many of the privacy issues in social networks.

Geoinformatics for Urbanisation and Urban Sprawl Pattern Analysis

Urbanisation is the increase in the population of cities in proportion to the region's rural population. Urbanisation in India is very rapid with urban population growing at around 2.3 percent per annum. Urban sprawl refers to the dispersed development along highways or surrounding the city and in rural countryside with implications such as loss of agricultural land, open space and ecologically sensitive habitats. Sprawl is thus a pattern and pace of land use in which the rate of land consumed for urban purposes exceeds the rate of population growth resulting in an inefficient and consumptive use of land and its associated resources. This unprecedented urbanisation trend due to burgeoning population has posed serious challenges to the decision makers in the city planning and management process involving plethora of issues like infrastructure development, traffic congestion, and basic amenities (electricity, water, and sanitation), etc. In this context, to aid the decision makers in following the holistic approaches in the city and urban planning, the pattern, analysis, visualization of urban growth and its impact on natural resources has gained importance. This communication, analyses the urbanisation pattern and trends using temporal remote sensing data based on supervised learning using maximum likelihood estimation of multivariate normal density parameters and Bayesian classification approach. The technique is implemented for Greater Bangalore – one of the fastest growing city in the World, with Landsat data of 1973, 1992 and 2000, IRS LISS-3 data of 1999, 2006 and MODIS data of 2002 and 2007. The study shows that there has been a growth of 466% in urban areas of Greater Bangalore across 35 years (1973 to 2007). The study unravels the pattern of growth in Greater Bangalore and its implication on local climate and also on the natural resources, necessitating appropriate strategies for the sustainable management.

Fusion of multi resolution remote sensing data for urban sprawl analysis

Urban population is growing at around 2.3 percent per annum in India. This is leading to urbanisation and often fuelling the dispersed development in the outskirts of urban and village centres with impacts such as loss of agricultural land, open space, and ecologically sensitive habitats. This type of upsurge is very much prevalent and persistent in most places, often inferred as sprawl. The direct implication of such urban sprawl is the change in land use and land cover of the region and lack of basic amenities, since planners are unable to visualise this type of growth patterns. This growth is normally left out in all government surveys (even in national population census), as this cannot be grouped under either urban or rural centre. The investigation of patterns of growth is very crucial from regional planning point of view to provide basic amenities in the region. The growth patterns of urban sprawl can be analysed and understood with the availability of temporal multi-sensor, multi-resolution spatial data. In order to optimise these spectral and spatial resolutions, image fusion techniques are required. This aids in integrating a lower spatial resolution multispectral (MSS) image (for example, IKONOS MSS bands of 4m spatial resolution) with a higher spatial resolution panchromatic (PAN) image (IKONOS PAN band of 1m spatial resolution) based on a simple spectral preservation fusion technique - the Smoothing Filter-based Intensity Modulation (SFIM). Spatial details are modulated to a co-registered lower resolution MSS image without altering its spectral properties and contrast by using a ratio between a higher resolution image and its low pass filtered (smoothing filter) image. The visual evaluation and statistical analysis confirms that SFIM is a superior fusion technique for improving spatial detail of MSS images with the preservation of spectral properties.

The island of Kauai, Hawaii's progressive shoreline setback and coastal protection ordinance

Approximately two-thirds of coastal and Great Lakes states have some type of shoreline construction setback or construction control line requiring development to be a certain distance from the shoreline or other coastal feature (OCRM, 2008). Nineteen of 30 coastal states currently use erosion rates for new construction close to the shoreline. Seven states established setback distances based on expected years from the shoreline: the remainder specify a fixed setback distance (Heinz Report, 2000). Following public hearings by the County of Kauai Planning Commission and Kauai County Council, the ‘Shoreline Setback and Coastal Protection Ordinance’ was signed by the Mayor of Kauai on January 25, 2008. After a year of experience implementing this progressive, balanced shoreline setback ordinance several amendments were recently incorporated into the Ordinance (#887; Bill #2319 Draft 3). The Kauai Planning Department is presently drafting several more amendments to improve the effectiveness of the Ordinance. The intent of shoreline setbacks is to establish a buffer zone to protect shorefront development from loss due to coastal erosion - for a period of time; to provide protection from storm waves; to allow the natural dynamic cycles of erosion and accretion of beaches and dunes to occur; to maintain beach and dune habitat; and, to maintain lateral beach access and open space for the enjoyment of the natural shoreline environment. In addition, a primary goal of the Kauai setback ordinance is to avoid armoring or hardening of the shore which along eroding coasts has been documented to ultimately eliminate the fronting beach. (PDF contains 4 pages)

Una aproximación psicosocial al conflicto vasco. Construyendo la paz en espacio abierto

450 p.

Designing conformational control of human tissue transglutaminase

Understanding the mechanisms of enzymes is crucial for our understanding of their role in biology and for designing methods to perturb or harness their activities for medical treatments, industrial processes, or biological engineering. One aspect of enzymes that makes them difficult to fully understand is that they are in constant motion, and these motions and the conformations adopted throughout these transitions often play a role in their function.

Traditionally, it has been difficult to isolate a protein in a particular conformation to determine what role each form plays in the reaction or biology of that enzyme. A new technology, computational protein design, makes the isolation of various conformations possible, and therefore is an extremely powerful tool in enabling a fuller understanding of the role a protein conformation plays in various biological processes.

One such protein that undergoes large structural shifts during different activities is human type II transglutaminase (TG2). TG2 is an enzyme that exists in two dramatically different conformational states: (1) an open, extended form, which is adopted upon the binding of calcium, and (2) a closed, compact form, which is adopted upon the binding of GTP or GDP. TG2 possess two separate active sites, each with a radically different activity. This open, calcium-bound form of TG2 is believed to act as a transglutaminse, where it catalyzes the formation of an isopeptide bond between the sidechain of a peptide-bound glutamine and a primary amine. The closed, GTP-bound conformation is believed to act as a GTPase. TG2 is also implicated in a variety of biological and pathological processes.

To better understand the effects of TG2’s conformations on its activities and pathological processes, we set out to design variants of TG2 isolated in either the closed or open conformations. We were able to design open-locked and closed-biased TG2 variants, and use these designs to unseat the current understanding of the activities and their concurrent conformations of TG2 and explore each conformation’s role in celiac disease models. This work also enabled us to help explain older confusing results in regards to this enzyme and its activities. The new model for TG2 activity has immense implications for our understanding of its functional capabilities in various environments, and for our ability to understand which conformations need to be inhibited in the design of new drugs for diseases in which TG2’s activities are believed to elicit pathological effects.

ICF靶场中光束口径与列阵间隔的研究

从靶场反射镜架模块的机械结构设计布局所需几何空间的角度出发，根据大口径、列阵器件的特殊要求，给出符合“神光Ⅲ”装置总体技术要求的ICF靶场光束口径与列阵间隔之间的关系，得出靶场△纵、△横应满足的公式．

星载激光相干测高计的参量设计

为使星载激光高度计实现高空间分辨力、高距离精度,提出了联合采用调频光纤激光器和相干测距的方法。详细讨论了这种方法的实现方案,并对方案中的激光发射功率、望远镜口径以及脉冲宽度对距离精度及信噪比的影响进行数值模拟。对系统参量进行分析,得到了相关参量的关系和优化的参量。结果表明,当望远镜口径为400 mm时,啁啾调频速率为1 MHz/μs,脉冲时间宽度150~350μs,发射功率10 W左右时,基于相干测距的星载激光高度计可以实现距离精度小于15 cm的技术指标。

Práticas sociais de efetivação e reivindicação do direito à saúde : uma análise do Brasil e Portugal

Com as transformações do Estado-Providência e das sociedades contemporâneas no que concerne ao exercício de direitos, observam-se alterações substantivas na estrutura, dimensões de ação e estratégias próprias dos mecanismos de reivindicação. No caso do direito à saúde, a análise dos casos de Brasil e Portugal permite discutir a interface entre Estado, sociedade e instituições jurídicas a partir da dimensão da cultura de participação dos cidadãos, das redes de solidariedade que constituem no espaço local e na utilização de mecanismos estatais e não-estatais. A respeito do arcabouço jurídico-institucional similar, a diversidade de repertórios de ação coletiva para reivindicar a efetivar este direito em ambos os países foi a tônica desta pesquisa, que se desenvolveu em 2011 em ambas as localidades. O objetivo do trabalho consiste em discutir as estratégias e formas de efetivação da saúde como direito, de modo a refletir sobre as oportunidades políticas e a cultura política de cada experiência. Para tal, foi realizada uma pesquisa qualitativa e quantitativa, com o objetivo de discutir os desafios de efetivação do direito à saúde com foco no acesso à justiça e nos repertórios de ação coletiva. As hipóteses foram: a) há diferenças no que concerne aos itinerários do cuidado em saúde, ora enfatizando a centralidade do Estado no cuidado (Brasil), ora responsabilidade o indivíduo pela sua própria saúde (Portugal), o que enseja impactos na própria cultura de participação dos indivíduos em ambos os países; b) há diferenças no que concerne à relação ente Judiciário e sociedade, ora estabelecendo políticas de proximidade com o cidadão (Brasil), ora estabelecendo políticas de desjudicialização (Portugal), o que enseja repercussões na própria forma como os indivíduos concebem o sistema judicial e o ativam em seu cotidiano; c) os sistemas de saúde de ambos os países foram construídos por influência predominantemente internacional (Portugal) ou dos movimentos sociais (Brasil), de modo que isto permitiu constituir em cada um destes países formas distintas de lidar com o direito à saúde pelos cidadãos. Os resultados videnciam que a complexidade da eleição do mecanismo estatal ou não-estatal está fortemente relacionada à cultura política dos cidadãos, além de fatores políticos e econômicos oriundos das oportunidades políticas de cada um dos países

Manopt, a matlab toolbox for optimization on manifolds

Optimization on manifolds is a rapidly developing branch of nonlinear optimization. Its focus is on problems where the smooth geometry of the search space can be leveraged to design effcient numerical algorithms. In particular, optimization on manifolds is well-suited to deal with rank and orthogonality constraints. Such structured constraints appear pervasively in machine learning applications, including low-rank matrix completion, sensor network localization, camera network registration, independent component analysis, metric learning, dimensionality reduction and so on. The Manopt toolbox, available at www.manopt.org, is a user-friendly, documented piece of software dedicated to simplify experimenting with state of the art Riemannian optimization algorithms. By dealing internally with most of the differential geometry, the package aims particularly at lowering the entrance barrier. © 2014 Nicolas Boumal.

秸秆覆盖量对夏玉米产量影响的试验研究

通过对夏玉米在露天和干旱棚控水2种土壤水分状况下生长状况的观测,发现秸秆覆盖夏玉米有明显增产效应,作物水分利用效率均得到了不同程度提高。通过对0、3000、6000、9000、12000 kg/hm2五种处理下玉米状况的对比,得出6000 kg/hm2为渭河平原地区最适宜夏玉米田秸秆覆盖量。在6000 kg/hm2覆盖量下,露天小区夏玉米可增产5.61%。试验证明,渭河平原地区秸秆覆盖夏玉米,增产潜力大,是一种值得推广的玉米增产措施。

克隆植物东方草莓对异质生境的适应对策

克隆植物被认为比非克隆植物更宜于利用异质性环境。在复杂的空间异质环境中，克隆植物可能形成了各种有效利用环境异质性的适应对策。对于克隆植物适应机制的研究，前人已做了大量的工作，特别是从形态和生物量分配等方面对简单异质生境下克隆植物的克隆整合和克隆分工进行了详细的研究。本研究以分布广泛的克隆植物东方草莓（Fragaria orientalis）作为研究对象，应用野外调查和实验生态学方法，采用多对比度单资源模型和不同向双资源模型，从形态和生理生态的角度，研究复杂异质生境下克隆植物的整合和分工及其耗益问题，分析不同类型的生境对克隆植物整合和分工的修饰作用，进而探讨克隆植物对异质生境的适应策略。克隆构型和分株种群特征是植物克隆生长及其生态适应对策研究的基本内容。本文通过野外调查，研究在不同光照条件下东方草莓克隆构型、分株种群特征以及点分布格局。结果表明：东方草莓的克隆构型随光照发生相应的变化，低光照下其匍匐茎节间长和分枝角度均增大而分枝强度减小；随光照减弱，东方草莓分株种群的生物量、根冠比和分株种群密度显著降低；不同光照下东方草莓分株均以随机分布为主但不同尺度下有所差异，其分布格局强度依次为旷地<林缘<林下。结合克隆植物对资源的利用对策，探讨了克隆构型和分株种群特征以及分布格局随环境条件变化的生态适应意义。不同生境斑块条件下克隆植物可能采取不同的适应对策。采用盆栽实验，研究不同水分对比度下克隆整合及其生理生态特征，并对单向和交互资源中东方草莓的克隆整合做了对比研究。结果显示：高的水分对比度能够促进东方草莓的克隆整合，并能刺激相连分株增加光合作用，东方草莓体内的氧化—抗氧化系统也II随对比度做出相应的反应。耗-益分析表明胁迫分株的受益是以供给分株的损耗为代价的，但从克隆片段总体来说是受益的。单向资源中东方草莓生长的绝对值高于交互资源，但耗-益分析表明生长于交互资源下东方草莓的克隆整合获益大于生长于单向资源下东方草莓的克隆整合获益。长期生长于特定生境的克隆植物，在进化过程中其克隆整合和克隆分工在对资源异质性的适应策略方面可能有所侧重。采用盆栽实验对来自不同海拔梯度的东方草莓的克隆整合和克隆分工对异质资源的适应对策进行了研究。实验结果表明，来自高海拔的东方草莓可塑性较差。来自两个海拔的东方草莓对切断匍匐茎的表现有所差异，总体上切断匍匐茎对来自高海拔的东方草莓影响更大些。另外，来自高海拔的东方草莓表现出更高的克隆分工。IIIClonal plants are known to be more suitable for the habitats of heterogeneousresources than nonclonal plants, perhaps due to their well developed adaptivestrategies to environmental heterogeneity. Many studies have been done on theadaptive mechanisms of clonal plants, especially on the clonal integration anddivision of labor with morphology and biomass allocation under simpleheterogeneous habitats. Based on field surveys, laboratory experiments, multi-contrastunidirectional resource model and reciprocal resource model, Fragaria orientalis, aRosaceae stoloniferous herb that widely distributes in China, was used to study thisplant’s morphological and physiological responses to complicated heterogeneoushabitats in terms of its clonal integration, division of labor and cost-benefit, as well astheir modifications by different habitats, so as to better understand the adaptivestrategies of clonal plants under heterogeneous environments.Clonal architecture and ramet population characteristics are of the major concernin the studies on growth and adaptive strategies of clonal plants. Clonal architecture,ramet population characteristics and spatial point pattern of F. orientalis underdifferent light intensity were studied with field observations. The results showed that,clonal architecture changed with light availability: Internode-lengths and branchangels of stolons were larger while branch intensities were smaller under lower lightintensity than those under higher light intensity; Biomass of ramet population,root-shoot ratio and density of ramet population decreased significantly with reduce oflight intensity; Under all light intensities, spatial pattern of ramets was mainlyrandomly distributed but it changed with different scales, with pattern intensity as:open space < forest edge < understory. Adaptation significance of the clonal architecture, the ramet population characteristics and the spatial pattern changing withdifferent environments was discussed according to these results.Clonal plants may take different adaptive strategies under different patches. Withpot culture, clonal integration and physiological parameters of F. orientalis underdifferent water contrasts were studied, and clonal integration under unilateralresources and reciprocal resources were also compared. The results suggested that,high water contrast improve the clonal integration of F. orientalis and increase thephotosynthesis of connected ramets. Oxidative and antioxidative system of F.orientalis also responded with changing water contrasts. According to cost-benefitanalysis, the drought-stressed ramets obtained benefits from the connectedwell-watered ramets, and as a whole, the clonal fragment could also get benefits.Growth of F. orientalis in homogeneous resources was better than that inheterogeneous resources, but the whole plant got more benefit through clonalintegration in heterogeneous resources than in homogeneous resources.Pot culture experiments were also used to study the adaptive strategies inutilizing heterogeneous resources by the plant populations from different altitudes.The results showed that, F. orientalis from alpine zones were shorter and lessexpanded with poorer clonal plasticity than those from middle mountains. F.orientalis from two different altitudes showed different responses to stolon severing,and as a whole, stolon severing had more influence on F. orientalis from alpine zones.In addition, F. orientalis from alpine zones exhibited higher division of labor, whichsuggested that clonal plants from different habitats develop their own adaptivemechanisms in their clonal integration and division of labor in response toenvironmental heterogeneity.

Mesoscopic simulation of the impregnating process of unidirectional fibrous preform in resin transfer molding

The resin transfer molding has gained popularity in the preparation of fiber-reinforced polymer-matrix composites because of its high efficiency and low pollution. The non-uniform inter-tow and intra-tow flows are regarded as the reason of void formation in RTM. According to the process characteristics, the axisymmetric model was developed to study the interaction between the flow in the inter-tow space and that in the intra-tow space. The flow behavior inside the fiber tows was formulated using Brinkman's equation, while that in the open space around the fiber tows was formulated by Stokes' equation. The volume of fluid (VOF) method was applied to track the flow front, and the effects of filling velocity, resin viscosity, inter-tow dimension and intra-tow permeability on fluid pressure and flow front were analyzed. The results show that the flow front difference between the inter-tow and intra-tow becomes larger with the decrease of intra-tow permeability, as well as the increase of filling velocity and inter-tow dimension.