Caracterização de núcleos celulares no adenocarcinoma primário de reto por análise de imagem digital

O câncer colorretal é um tumor maligno freqüente no mundo ocidental. É o terceiro em freqüência e o segundo em mortalidade nos países desenvolvidos. No Brasil está entre as seis neoplasias malignas mais encontradas e a quinta em mortalidade. Dos tumores colorretais, aproximadamente 40% estão localizados no reto. A sobrevida, em cinco anos, dos pacientes operados por câncer do reto varia entre 40% e 50%, estando os principais fatores prognósticos, utilizados na prática clínica corrente, baseados em critérios de avaliação clínico-patológicos. A avaliação das alterações morfométricas e densimétricas nas neoplasias malignas tem, recentemente, sido estudadas e avaliadas através da análise de imagem digital e demonstrado possibilidades de utilização diagnóstica e prognóstica. A assinatura digital é um histograma representativo de conjuntos de características de textura da cromatina do núcleo celular obtida através da imagem computadorizada. O objetivo deste estudo foi a caracterização dos núcleos celulares neoplásicos no adenocarcinoma primário de reto pelo método da assinatura digital e verificar o valor prognóstico das alterações nucleares da textura da cromatina nuclear para esta doença. Foram avaliados, pelo método de análise de imagem digital, 51 casos de pacientes operados no Hospital de Clínicas de Porto Alegre (HCPA) entre 1988 e 1996 e submetidos à ressecção eletiva do adenocarcinoma primário de reto, com seguimento de cinco anos pós-operatório, ou até o óbito antes deste período determinado pela doença, e 22 casos de biópsias normais de reto obtidas de pacientes submetidos a procedimentos endoscópicos, para controle do método da assinatura digital. A partir dos blocos de parafina dos espécimes estocados no Serviço de Patologia do HCPA, foram realizadas lâminas coradas com hematoxilina e eosina das quais foram selecionados 3.635 núcleos dos adenocarcinomas de reto e 2.366 núcleos dos controles da assinatura digital, totalizando 6.001 núcleos estudados por análise de imagem digital. De cada um destes núcleos foram verificadas 93 características, sendo identificadas 11 características cariométricas com maior poder de discriminação entre as células normais e neoplásicas. Desta forma, através da verificação da textura da cromatina nuclear, foram obtidos os histogramas representativos de cada núcleo ou conjunto de núcleos dos grupos ou subgrupos estudados, também no estadiamento modificado de Dukes, dando origem às assinaturas digitais correspondentes. Foram verificadas as assinaturas nucleares, assinaturas de padrão histológico ou de lesões e a distribuição da Densidade Óptica Total. Houve diferença significativa das características entre o grupo normal e o grupo com câncer, com maior significância para três delas, a Área, a Densidade Óptica Total e a Granularidade nuclear. Os valores das assinaturas médias nucleares foram: no grupo normal 0,0009 e nos estadiamentos; 0,9681 no A, 4,6185 no B, 2,3957 no C e 2,1025 no D e diferiram com significância estatística (P=0,001). A maior diferença do normal ocorreu no subgrupo B de Dukes-Turnbull. As assinaturas nucleares e de padrão histológico mostraram-se distintas no grupo normal e adenocarcinoma, assim como a distribuição da Densidade Óptica Total a qual mostra um afastamento progressivo da normalidade no grupo com câncer. Foi possível a caracterização do adenocarcinoma de reto, que apresentou assinaturas digitais específicas. Em relação ao prognóstico, a Densidade Óptica Total representou a variável que obteve o melhor desempenho, além do estadiamento, como preditor do desfecho.

Democracia digital e participação cidadã: um estudo de caso do governo do Estado do Rio Grande do Sul

Este trabalho teve como principal objetivo avaliar o processo participativo digital relativo à segunda edição do Governador Pergunta. Nesse sentido, foram utilizadas algumas das categorias e critérios propostos por Villela (2012) cujos objetivos são a avaliação de processos participativos. A utilização de tais critérios se apoia na concepção de cidadania deliberativa, ampliada por conceitos de democracia digital. Optou-se por analisa-lo a partir de alguns critérios de avaliação de processos participativos deliberativos, quais sejam: Processos de Discussão, Inclusão, Pluralismo e Bem Comum. Os dados foram coletados, em um primeiro momento, por meio de pesquisa bibliográfica. Em seguida, foram realizadas entrevistas junto aos principais atores envolvidos no Gabinete Digital e na consulta pública digital do trânsito do Governador Pergunta. Em suma, os resultados apontam para a existência de espaços para discussão, contudo sem capacidade deliberativa. Entretanto, tal experiência participativa cidadã tratou por renovar e pautar a agenda pública no Estado do Rio Grande do Sul. Por fim, apresentam-se recomendações para o aperfeiçoamento do Gabinete Digital e da ferramenta do Governador Pergunta pela gestão pública.

A percepção de valor de uma biblioteca médica digital para o embasamento das condutos assistenciais adotadas em um hospital privado no Rio de Janeiro

Este estudo foi desenvolvido em um hospital privado, no Rio de Janeiro, com o intuito de demonstrar o valor de uma biblioteca médica digital, como ferramenta de suporte para fundamentação científica das condutas assistenciais adotadas pela equipe médica, que resultaram em glosas técnicas e perda de faturamento para a instituição. Para isso, por meio do método revisão integrativa, foi coletada a literatura clínica referente às glosas, ocorridas durante o período de janeiro a setembro de 2014, e analisada sob a perspectiva do modelo conceitual apresentado pela Cochrane (LEFEBVRE et al., 2011) que identifica o nível da evidência científica e estabelece o seu grau de recomendação para a prática clínica. Durante a análise de conteúdo, considerando as técnicas propostas por Bardin (1977), foram identificadas as evidências científicas que conferem valor à prática assistencial, conforme proposto pelo modelo conceitual. Além disso, o valor dos itens glosados foi incluído na análise dos resultados, reforçando a tendência do estudo para a validação do modelo conceitual que recomenda a prática clínica baseada em evidências científicas para geração de resultados mais efetivos e de melhor custo/benefício na saúde. Com base nos achados, são discutidas as implicações teóricas e práticas, assim como sugestões para futuros estudos sobre o tema.

An evaluation of the Business Model Canvas by technology-oriented startups in Brazil : a qualitative study about the usage of the tool by Brazilian entrepreneurs

The following paper was conducted with the support of several entrepreneurs and startups from Brazil. The aim of the research was to find out which impact the Business Model Canvas, further abbreviated as BMC, has on technology-oriented startups in Brazil. The first step of the study was identify some general concepts of entrepreneurship, as well as the conditions and environment of the country. Afterwards, it was focused on defining and comparing different business model tools and concepts to the BMC. After the literature review and meeting with several professionals in the area of entrepreneurship and startups, a questionnaire was formulated in order to conduct the qualitative study and identify the main impact of the tool. The questionnaire was answered by ten startups. In order to check the validity and credibility of the research outcomes, theory and investigator triangulation was used. As a result, the usage of the BMC could be evaluated by obtaining the outcomes and the theory, which showed that Brazilian tech startups are using Osterwalder’s model for the reason of idea creation and testing, validating and pivoting their business model. Interestingly, the research revealed that the entrepreneurs are using the tool often not in the traditional way of printing it, but rather applying it as a thinking approach. Besides, the entrepreneurs are focusing mostly on developing a strong Value Proposition, Customer Segment and sustainable Revenue Streams, while afterwards the remaining building blocks are built. Moreover, the research showed that the startups are using also other concepts, such as the Customer Development Process or Build-Measure-Learn Feedback Loop. These methodologies are often applied together with the BMC and helps to identify the most sustainable components of the business idea. Keywords: Business

Touch ‘n’ sketch: pen and fingers on a multi-touch sketch application for tablet PC’s

In many creative and technical areas, professionals make use of paper sketches for developing and expressing concepts and models. Paper offers an almost constraint free environment where they have as much freedom to express themselves as they need. However, paper does have some disadvantages, such as size and not being able to manipulate the content (other than remove it or scratch it), which can be overcome by creating systems that can offer the same freedom people have from paper but none of the disadvantages and limitations. Only in recent years has the technology become massively available that allows doing precisely that, with the development in touch‐sensitive screens that also have the ability to interact with a stylus. In this project a prototype was created with the objective of finding a set of the most useful and usable interactions, which are composed of combinations of multi‐touch and pen. The project selected Computer Aided Software Engineering (CASE) tools as its application domain, because it addresses a solid and well‐defined discipline with still sufficient room for new developments. This was the result from the area research conducted to find an application domain, which involved analyzing sketching tools from several possible areas and domains. User studies were conducted using Model Driven Inquiry (MDI) to have a better understanding of the human sketch creation activities and concepts devised. Then the prototype was implemented, through which it was possible to execute user evaluations of the interaction concepts created. Results validated most interactions, in the face of limited testing only being possible at the time. Users had more problems using the pen, however handwriting and ink recognition were very effective, and users quickly learned the manipulations and gestures from the Natural User Interface (NUI).

Depleting the curriculum: teaching digital platforms and curricular impoverishment

The paper aims at showing how curricular complexity tends to be depleted by the use of digital platforms based on the SCORM (Sharable Content Object Reference Model) standard, which was created with the main purpose of recycling content as it is supposed to be independent both from the context of learning and the supporting technology also deemed to be neutral, all surrounded by a rhetoric of innovation and “pedagogical” innovation. The starting point of the discussion is García Perez’s model of Traditional Didactics as a simple tool to show almost graphically that any ancient didactic model is far richer in terms of complexity than the linearity, in disguise most of the times but still visible under a not so sophisticated critical lens, of the interaction human-(reusable) content that is the basis of the SCORM standard. The paper also addresses some of the more common deliberate mix-ups related to those digital platforms, such as learning and teaching, content and learning object, systems of automatic teaching and learning management systems.

Robótica e educação: uma possibilidade de inserção sócio-digital

This paper presents a reflection on the use of robotics in education technology and the fostering of social and digital inclusion, unveiling a new field that has been outlined today. Robotics constitutes a tool still little known and not regulated at national level in education, there is little experience involving the tool in the Northeast. This research aims to reveal one of the first experiments with educational level robotics in Rio Grande do Norte. We present a field research conducted in a public school chancellor for a major institute of science and technology education of the state from seeking review of the robotics course, understand how they work and show their use in school and shows that contributions were generated for digital inclusion category students, based on speeches by teachers, engineers, management and students. As part of gathering information, we used the focus group technique, applied in two stages, one with groups of students, teachers and other school administration, as well as comments directed to the times when the robotics course was being finalized. As a result, we found that the school, through the robotics course is a provider of social and digital inclusion, since it awakens in the sample of students in this research knowledge enabler of social change. And that despite the student category do not understand the depth of meaning of inclusion, the same report in daily actions that integrate technology into their social context in harmony, enjoying its cultural citizenship in full

RoboEduc: especificação de um software educacional para ensino da robótica às crianças como uma ferramenta de inclusão digital

Because of social exclusion in Brazil and having as focus the digital inclusion, was started in Federal University of Rio Grande do Norte a project that could talk, at the same time, about concepts of collaborative learning and educational robotics , focused on children digitally excluded. In this context was created a methodology that approaches many subjects as technological elements (e. g. informatics and robotics) and school subjects (e. g. Portuguese, Mathematics, Geography, History), contextualized in everyday situations. We observed educational concepts of collaborative learning and the development of capacities from those students, as group work, logical knowledge and learning ability. This paper proposes an educational software for robotics teaching called RoboEduc, created to be used by children digitally excluded from primary school. Its introduction prioritizes a friendly interface, that makes the concepts of robotics and programming easy and fun to be taught. With this new tool, users without informatics or robotics previous knowledge are able to control a robot, previously set with Lego kits, or even program it to carry some activities out. This paper provides the implementation of the second version of the software. This version presents the control of the robot already used. After were implemented the different levels of programming linked to the many learning levels of the users and their different interfaces and functions. Nowadays, has been implemented the third version, with the improvement of each one of the mentioned stages. In order to validate, prove and test the efficience of the developed methodology to the RoboEduc, were made experiments, through practice of robotics, with children for fourth and fifth grades of primary school at the City School Professor Ascendino de Almeida, in the suburb of Natal (west zone), Rio Grande do Norte. As a preliminary result of the current technology, we verified that the use of robots associated with a well elaborated software can be spread to users that know very little about the subject, without the necessity of previous advanced technology knowledges. Therefore, they showed to be accessible and efficient tools in the process of digital inclusion

Análise da imagem digital para estimativa da área foliar em plantas de laranja Pêra

Objetivou-se, com o trabalho, avaliar dois métodos de estimativa da área foliar, em plantas de laranja Pêra, pela análise da imagem digital obtida com scanner e câmera fotográfica digital. Para determinar a área das folhas, um grupo de discos foi colocado sobre um leitor de scanner, sendo que a imagem obtida foi armazenada. Os mesmos grupos de discos foram fixados sobre cartolina branca e fotografados com câmera fotográfica digital. As imagens obtidas da câmera fotográfica e do scanner foram processadas utilizando ferramentas de um editor de imagem que permite a contagem de pixels de determinada cor, no caso verde. Para a comparação dos métodos, os discos foram submetidos a integrador óptico de área foliar modelo LICOR-3100, utilizando os mesmos agrupamentos. Foram coletadas 20 folhas (cinco em cada quadrante da planta) por parcela de um experimento para comparação de fertilizantes comerciais e doses de zinco, aplicados via foliar, em plantas de sete anos de idade. O experimento foi composto de sete tratamentos e quatro repetições, num total de 28 parcelas. Os dois métodos apresentaram alta correlação com a área estimada pelo integrador óptico de área, considerado como método de referência. O método da análise da imagem obtida com câmera fotográfica, na resolução de 5.0 megapixel, foi mais precisa quando comparada à área estimada pelo integrador óptico de área.

Quantitative fractography under light microscopy: A digital image processing approach

This work is an example of the improvement on quantitative fractography by means of digital image processing and light microscopy. Two techniques are presented to investigate the quantitative fracture behavior of Ti-4Al-4V heat-treated alloy specimens, under Charpy impact testing. The first technique is the Minkowski method for fractal dimension measurement from surface profiles, revealing the multifractal character of Ti-4Al-4V fracture. It was not observed a clear positive correlation of fractal values against Charpy energies for Ti-4Al-4V alloy specimens, due to their ductility, microstructural heterogeneities and the dynamic loading characteristics at region near the V-notch. The second technique provides an entire elevation map of fracture surface by extracting in-focus regions for each picture from a stack of images acquired at successive focus positions, then computing the surface roughness. Extended-focus reconstruction has been used to explain the behavior along fracture surface. Since these techniques are based on light microscopy, their inherent low cost is very interesting for failure investigations.

Digital radiography using digital detector arrays fulfills critical applications for offshore pipelines

Digital radiography in the inspection of welded pipes to be installed under deep water offshore gas and oil pipelines, like a presalt in Brazil, in the paper has been investigated. The aim is to use digital radiography for nondestructive testing of welds as it is already in use in the medical, aerospace, security, automotive, and petrochemical sectors. Among the current options, the DDA (Digital Detector Array) is considered as one of the best solutions to replace industrial films, as well as to increase the sensitivity to reduce the inspection cycle time. This paper shows the results of this new technique, comparing it to radiography with industrial films systems. In this paper, 20 test specimens of longitudinal welded pipe joints, specially prepared with artificial defects like cracks, lack of fusion, lack of penetration, and porosities and slag inclusions with varying dimensions and in 06 different base metal wall thicknesses, were tested and a comparison of the techniques was made. These experiments verified the purposed rules for parameter definitions and selections to control the required digital radiographic image quality as described in the draft international standard ISO/DIS 10893-7. This draft is first standard establishing the parameters for digital radiography on weld seam of welded steel pipes for pressure purposes to be used on gas and oil pipelines.

Generating VHDL-AMS models of digital-to-analogue converters from MATLAB (R)/SIMULINK (R)

Today, the trend within the electronics industry is for the use of rapid and advanced simulation methodologies in association with synthesis toolsets. This paper presents an approach developed to support mixed-signal circuit design and analysis. The methodology proposed shows a novel approach to the problem of developing behvioural model descriptions of mixed-signal circuit topologies, by construction of a set of subsystems, that supports the automated mapping of MATLAB (R)/SINIULINK (R) models to structural VHDL-AMS descriptions. The tool developed, named (MSSV)-S-2, reads a SIMULINK (R) model file and translates it to a structural VHDL-AMS code. It also creates the file structure required to simulate the translated model in the SystemVision (TM). To validate the methodology and the developed program, the DAC08, AD7524 and AD5450 data converters were studied and initially modelled in MATLAB (R)/SIMULINK (R). The VHDL-AMS code generated automatically by (MSSV)-S-2, (MATLAB (R)/SIMULINK (R) to SystemVision (TM)), was then simulated in the SystemVision (TM). The simulation results show that the proposed approach, which is based on VHDL-AMS descriptions of the original model library elements, allows for the behavioural level simulation of complex mixed-signal circuits.

Comparison between embossed digital imaging and unprocessed film-based radiography in detecting periodontal bone defects: an in vitro study

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Recursive hierarchic segmentation analysis of bone mineral density changes on digital panoramic images

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)