Direction finding in the presence of a more realistic environment model

Direction-of-arrival (DOA) estimation is susceptible to errors introduced by the presence of real-ground and resonant size scatterers in the vicinity of the antenna array. To compensate for these errors pre-calibration and auto-calibration techniques are presented. The effects of real-ground constituent parameters on the mutual coupling (MC) of wire type antenna arrays for DOA estimation are investigated. This is accomplished by pre-calibration of the antenna array over the real-ground using the finite element method (FEM). The mutual impedance matrix is pre-estimated and used to remove the perturbations in the received terminal voltage. The unperturbed terminal voltage is incorporated in MUSIC algorithm to estimate DOAs. First, MC of quarter wave monopole antenna arrays is investigated. This work augments an existing MC compensation technique for ground-based antennas and proposes reduction in MC for antennas over finite ground as compared to the perfect ground. A factor of 4 decrease in both the real and imaginary parts of the MC is observed when considering a poor ground versus a perfectly conducting one for quarter wave monopoles in the receiving mode. A simulated result to show the compensation of errors direction of arrival (DOA) estimation with actual realization of the environment is also presented. Secondly, investigations for the effects on received MC of λ/2 dipole arrays placed near real-earth are carried out. As a rule of thumb, estimation of mutual coupling can be divided in two regions of antenna height that is very near ground 0

Management Challenges in Nurturing a Safe Work Environment

As engineers, we are trained to use logical, rational problem solving to insure our mines operate at maximum efficiency. We tend to use the same technical approach to design safety into all mining systems. This works well for machines, but not so much for the human component. Recent insights in the field of behavioral economics provide useful ideas for addressing the fact that we are driven by emotions more often than by rational thought. Understanding the nonrational aspect of human behavior is an important piece of any safety system design.

The EU’s Trouble with Mashups: From Disabling to Enabling a Digital Art Form

New tools for editing of digital images, music and films have opened up new possibilities to enable wider circles of society to engage in ’artistic’ activities of different qualities. User-generated content has produced a plethora of new forms of artistic expression. One type of user-generated content is the mashup. Mashups are compositions that combine existing works (often) protected by copyright and transform them into new original creations. The European legislative framework has not yet reacted to the copyright problems provoked by mashups. Neither under the US fair use doctrine, nor under the strict corset of limitations and exceptions in Art 5 (2)-(3) of the Copyright Directive (2001/29/EC) have mashups found room to develop in a safe legal environment. The contribution analyzes the current European legal framework and identifies its insufficiencies with regard to enabling a legal mashup culture. By comparison with the US fair use approach, in particular the parody defense, a recent CJEU judgment serves as a comparative example. Finally, an attempt is made to suggest solutions for the European legislator, based on the policy proposals of the EU Commission’s “Digital Agenda” and more recent policy documents (e.g. “On Content in the Digital Market”, “Licenses for Europe”). In this context, a distinction is made between non-commercial mashup artists and the emerging commercial mashup scene.

Sonic intelligence as a virtual therapeutic environment

This paper reports on the results of a research project, on comparing one virtual collaborative environment with a first-person visual immersion (first-perspective interaction) and a second one where the user interacts through a sound-kinetic virtual representation of himself (avatar), as a stress-coping environment in real-life situations. Recent developments in coping research are proposing a shift from a trait-oriented approach of coping to a more situation-specific treatment. We defined as real-life situation a target-oriented situation that demands a complex coping skills inventory of high self-efficacy and internal or external "locus of control" strategies. The participants were 90 normal adults with healthy or impaired coping skills, 25-40 years of age, randomly spread across two groups. There was the same number of participants across groups and gender balance within groups. All two groups went through two phases. In Phase I, Solo, one participant was assessed using a three-stage assessment inspired by the transactional stress theory of Lazarus and the stress inoculation theory of Meichenbaum. In Phase I, each participant was given a coping skills measurement within the time course of various hypothetical stressful encounters performed in two different conditions and a control group. In Condition A, the participant was given a virtual stress assessment scenario relative to a first-person perspective (VRFP). In Condition B, the participant was given a virtual stress assessment scenario relative to a behaviorally realistic motion controlled avatar with sonic feedback (VRSA). In Condition C, the No Treatment Condition (NTC), the participant received just an interview. In Phase II, all three groups were mixed and exercised the same tasks but with two participants in pairs. The results showed that the VRSA group performed notably better in terms of cognitive appraisals, emotions and attributions than the other two groups in Phase I (VRSA, 92%; VRFP, 85%; NTC, 34%). In Phase II, the difference again favored the VRSA group against the other two. These results indicate that a virtual collaborative environment seems to be a consistent coping environment, tapping two classes of stress: (a) aversive or ambiguous situations, and (b) loss or failure situations in relation to the stress inoculation theory. In terms of coping behaviors, a distinction is made between self-directed and environment-directed strategies. A great advantage of the virtual collaborative environment with the behaviorally enhanced sound-kinetic avatar is the consideration of team coping intentions in different stages. Even if the aim is to tap transactional processes in real-life situations, it might be better to conduct research using a sound-kinetic avatar based collaborative environment than a virtual first-person perspective scenario alone. The VE consisted of two dual-processor PC systems, a video splitter, a digital camera and two stereoscopic CRT displays. The system was programmed in C++ and VRScape Immersive Cluster from VRCO, which created an artificial environment that encodes the user's motion from a video camera, targeted at the face of the users and physiological sensors attached to the body.

Digital Technologies and Traditional Cultural Expressions : A Positive Look at a Difficult Relationship

Digital technologies have often been perceived as imperilling traditional cultural expressions (TCE). This angst has interlinked technical and socio-cultural dimensions. On the technical side, it is related to the affordances of digital media that allow, among other things, instantaneous access to information without real location constraints, data transport at the speed of light and effortless reproduction of the original without any loss of quality. In a socio-cultural context, digital technologies have been regarded as the epitome of globalisation forces - not only driving and deepening the process of globalisation itself but also spreading its effects. The present article examines the validity of these claims and sketches a number of ways in which digital technologies may act as benevolent factors. We illustrate in particular that some digital technologies can be instrumentalised to protect TCE forms, reflecting more appropriately the specificities of TCE as a complex process of creation of identity and culture. The article also seeks to reveal that digital technologies - and more specifically the Internet and the World Wide Web - have had a profound impact on the ways cultural content is created, disseminated, accessed and consumed. We argue that this environment may have generated various opportunities for better accommodating TCE, especially in their dynamic sense of human creativity.

Cultural Protectionism 2.0 : Updating Cultural Policy Tools for the Digital Age

This chapter explores cultural protectionism 2.0, i.e. the normative dimensions of cultural diversity policies in the global digital space, asking what adjustments are needed and in fact, how feasible the entire project of diversity regulation in this environment may be. The complexities of the shift from offline to online and from analogue to digital, and the inherent policy challenges are illustrated with some (positive and negative) instances of existing media initiatives. Taking into account the specificities of cyberspace and in a forward-looking manner, the chapter suggests some adjustments to current media policy practices in order to better serve the goal of sustainably diverse cultural environment.

Updating Cultural Law and Policy for the Digital Age

The chapter is an enquiry of the possibly failing or changed rationales of cultural protectionism in the digital age. It seeks to identify the adjustments needed, so that cultural policy could still serve its benevolent goals and effectively contribute to sustaining a cultural environment that is diverse and vibrant.

Digital repository implementation: a toolbox for streamlined success

Purpose – The purpose of this paper is to describe the tools and strategies that were employed by C/W MARS to successfully develop and implement the Digital Treasures digital repository. Design/methodology/approach – This paper outlines the planning and subsequent technical issues that arise when implementing a digitization project on the scale of the large, multi-type, automated library network. Workflow solutions addressed include synchronous online metadata record submissions from multiple library sources and the delivery of collection-level use statistics to participating library administrators. The importance of standards-based descriptive metadata and the role of project collaboration are also discussed. Findings – From the time of its initial planning, the Digital Treasures repository was fully implemented in six months. The discernable and statistically quantified online discovery and access of actual digital objects greatly assisted libraries unsure of their own staffing costs/benefits to join the repository. Originality/value – This case study may serve as a possible example of initial planning, workflow and final implementation strategies for new repositories in both the general and library consortium environment. Keywords – Digital repositories, Library networks, Data management. Paper type – Case study

Arte y nuevas tecnologías : acerca de la producción, modalidades expositivas y diversas aplicaciones de la imagen digital

Se propone la producción y posterior análisis de obras digitales que presenta una elaboración teórica-práctica intrínseca como sustento de las nuevas categorías y neologismos surgidos dentro del ámbito artístico digital. Se estudian distintas aplicaciones, modalidades de creación, exposición y transferencia al medio como así también las posibilidades relacionales que surgen entre imagen digital, objeto artístico y diseño de productos traspasando las fronteras de campos disciplinares como Arte y Diseño. La metodología empleada se concentra en enfoques sociológicos y semiótico-pragmáticos que permiten realizar un análisis profundo de las obras digitales en sí mismas y en relación a los contextos de producción, circulación, exposición y consumo.

Metadata Visualization of Cultural Heritage Information within a Collaborative Environment

Cultural content on the Web is available in various domains (cultural objects, datasets, geospatial data, moving images, scholarly texts and visual resources), concerns various topics, is written in different languages, targeted to both laymen and experts, and provided by different communities (libraries, archives museums and information industry) and individuals (Figure 1). The integration of information technologies and cultural heritage content on the Web is expected to have an impact on everyday life from the point of view of institutions, communities and individuals. In particular, collaborative environment scan recreate 3D navigable worlds that can offer new insights into our cultural heritage (Chan 2007). However, the main barrier is to find and relate cultural heritage information by end-users of cultural contents, as well as by organisations and communities managing and producing them. In this paper, we explore several visualisation techniques for supporting cultural interfaces, where the role of metadata is essential for supporting the search and communication among end-users (Figure 2). A conceptual framework was developed to integrate the data, purpose, technology, impact, and form components of a collaborative environment, Our preliminary results show that collaborative environments can help with cultural heritage information sharing and communication tasks because of the way in which they provide a visual context to end-users. They can be regarded as distributed virtual reality systems that offer graphically realised, potentially infinite, digital information landscapes. Moreover, collaborative environments also provide a new way of interaction between an end-user and a cultural heritage data set. Finally, the visualisation of metadata of a dataset plays an important role in helping end-users in their search for heritage contents on the Web.

Técnicas de procesado digital de señal aplicadas a acelerómetros

En este proyecto se estudian y analizan las diferentes técnicas de procesado digital de señal aplicadas a acelerómetros. Se hace uso de una tarjeta de prototipado, basada en DSP, para realizar las diferentes pruebas. El proyecto se basa, principalmente, en realizar filtrado digital en señales provenientes de un acelerómetro en concreto, el 1201F, cuyo campo de aplicación es básicamente la automoción. Una vez estudiadas la teoría de procesado y las características de los filtros, diseñamos una aplicación basándonos sobre todo en el entorno en el que se desarrollaría una aplicación de este tipo. A lo largo del diseño, se explican las diferentes fases: diseño por ordenador (Matlab), diseño de los filtros en el DSP (C), pruebas sobre el DSP sin el acelerómetro, calibración del acelerómetro, pruebas finales sobre el acelerómetro... Las herramientas utilizadas son: la plataforma Kit de evaluación 21-161N de Analog Devices (equipado con el entorno de desarrollo Visual DSP 4.5++), el acelerómetro 1201F, el sistema de calibración de acelerómetros CS-18-LF de Spektra y los programas software MATLAB 7.5 y CoolEditPRO 2.0. Se realizan únicamente filtros IIR de 2º orden, de todos los tipos (Butterworth, Chebyshev I y II y Elípticos). Realizamos filtros de banda estrecha, paso-banda y banda eliminada, de varios tipos, dentro del fondo de escala que permite el acelerómetro. Una vez realizadas todas las pruebas, tanto simulaciones como físicas, se seleccionan los filtros que presentan un mejor funcionamiento y se analizan para obtener conclusiones. Como se dispone de un entorno adecuado para ello, se combinan los filtros entre sí de varias maneras, para obtener filtros de mayor orden (estructura paralelo). De esta forma, a partir de filtros paso-banda, podemos obtener otras configuraciones que nos darán mayor flexibilidad. El objetivo de este proyecto no se basa sólo en obtener buenos resultados en el filtrado, sino también de aprovechar las facilidades del entorno y las herramientas de las que disponemos para realizar el diseño más eficiente posible. In this project, we study and analize digital signal processing in order to design an accelerometer-based application. We use a hardware card of evaluation, based on DSP, to make different tests. This project is based in design digital filters for an automotion application. The accelerometer type is 1201F. First, we study digital processing theory and main parameters of real filters, to make a design based on the application environment. Along the application, we comment all the different steps: computer design (Matlab), filter design on the DSP (C language), simulation test on the DSP without the accelerometer, accelerometer calibration, final tests on the accelerometer... Hardware and software tools used are: Kit of Evaluation 21-161-N, based on DSP, of Analog Devices (equiped with software development tool Visual DSP 4.5++), 1201-F accelerometer, CS-18-LF calibration system of SPEKTRA and software tools MATLAB 7.5 and CoolEditPRO 2.0. We only perform 2nd orden IIR filters, all-type : Butterworth, Chebyshev I and II and Ellyptics. We perform bandpass and stopband filters, with very narrow band, taking advantage of the accelerometer's full scale. Once all the evidence, both simulations and physical, are finished, filters having better performance and analyzed and selected to draw conclusions. As there is a suitable environment for it, the filters are combined together in different ways to obtain higher order filters (parallel structure). Thus, from band-pass filters, we can obtain many configurations that will give us greater flexibility. The purpose of this project is not only based on good results in filtering, but also to exploit the facilities of the environment and the available tools to make the most efficient design possible.

Android en el Hogar Digital usando UPnP y Redes LonWorks

Este Proyecto Final de Carrera se centra principalmente en el estudio de las tecnologías aplicadas al Hogar Digital (HD) y así poder desarrollar nuevas herramientas aplicadas a este Sector. La primera tecnología estudiada es LonWorks que se escogió porque en la EUITT se cuenta con un entorno domótico donde se aplica esta tecnología, materializado como una maqueta de una instalación LonWorks en un HD. Sobre este entorno se ha desarrollado una nueva forma de gestionar y controlar los elementos de una Red LonWorks mediante la tecnología Universal Plug & Play (UPnP). Los dispositivos LonWorks han sido recubiertos con una capa con la que se consigue tratar los elementos LonWorks como dispositivos UPnP, pudiendo de esta manera trabajar bajo un mismo formato de dispositivo. Este formato está definido por un documento denominado Descripción del Dispositivo UPnP. Por tanto, no es necesario conocer el estado de los dispositivos de la Red LonWorks, sino únicamente trabajar bajo una Red UPnP, creando nuevos dispositivos UPnP, puntos de Control y servicios a partir de los elementos LonWorks. Una vez realizado el recubrimiento del sistema LonWorks con UPnP, se ha definido y desarrollado una aplicación para Android que, permite controlar los elementos de la maqueta del HD desde un Smartphone o una Tablet. El acceso a la Red LonWorks de la maqueta del HD se hace a través de la interfaz Web Services SOAP/XML del dispositivo iLON100. ABSTRACT. This Final Degree Project is mainly focused on the study of the technologies applied to Digital Home and thus be able to develop new tools applied to this area. The first study is LonWorks technology which was chosen because the EUITT has a domotic environment where this technology is applied, materialized as a demonstrator of a LonWorks installation in HD. With this environment has developed a new way to manage and control the elements of a LonWorks network through technology by Universal Plug & Play (UPnP). LonWorks devices are covered with a layer and it is achieved LonWorks elements treat as UPnP devices. In this way the LonWorks elements can work under one device format. This format is defined by a document called UPnP Device Description. Therefore, it isn't necessary to know the state of the LonWorks network devices, but only work under an UPnP network, creating new UPnP devices, control points and services from LonWorks elements. After backfill of LonWorks system with UPnP, have being defined and developed an Android application that allow controlling the elements of the mockup of HD from Smartphone or a Tablet. The LonWorks network Access of the mockup of HD is done through the Web Interface Services SOAP / XML iLON100 device.

El Entorno Aumentado: Imperativo informacional para una ecología digital de lo arquitectónico

Esta tesis se suma a los intentos teóricos de clarificar la impronta del dominio digital en lo arquitectónico. Propone una cartografía crítica para reconstruir el proceso de tal convergencia considerando aquellos acontecimientos reveladores que lo han pautado. La integración de la extensión digital propia las tecnologías de la información y la comunicación en el contexto tradicional arquitectónico ha supuesto el advenimiento de un ecosistema artificial complejo. A esta realidad o proceso concurrente se la denomina el Entorno Aumentado. La línea principal de investigación explora el desarrollo de la interacción hombre-máquina, en sendas trayectorias sincrónicas convergentes. El análisis se aborda por tanto desde la consideración de esa naturaleza dual, atendiendo simultáneamente a la humanización del dominio digital o cómo la computación se adapta a la condición natural de ser humano, y a la digitalización del ser humano o cómo éste asume el imperativo digital. El análisis resulta vertebrado desde la condición panóptica del punto de observación del acontecimiento: la cuarta pared, entendida como pantalla y punto de inflexión que estructura la convergencia de los entornos físico y digital. La reflexión acometida sobre la construcción del Entorno Aumentado procura la verificación de la tesis, que es central en esta investigación: la multiplicación dimensional del lugar físico mediante su extensión con un campo informacional procedente del dominio digital, y sus efectos en la construcción de la nueva ecología digital propia del Entorno Aumentado. Esta circunstancia se produce tras la eclosión de la Revolución Digital en la segunda mitad del siglo XX, el consecuente incremento de la interacción entre los entornos digital y físico, y el alcance de un nivel superior de comunicación en los procesos arquitectónicos. Los síntomas del Entorno Aumentado se hacen notar en nuestra contemporaneidad; en ese sentido, la tesis alcanza un diagnóstico del cambio. La fractura y obsolescencia del límite espacio-temporal establecido por las dicotomías históricas privado-público, casa-ciudad, trabajo-ocio,…etc., o la vigencia del proyecto procedimental son algunas de sus consecuencias en el modo de abordar la disciplina arquitectónica. Abstract This dissertation aims to complete the theoretical attempts to clarify the digital domain imprint on the architectural realm. It constructs a critical cartography to reconstruct the process of such convergence, considering those principal events who have scheduled it. The integration of TIC’s digital extension through the traditional architectural context has meant the advent of an artificial complex ecosystem. This reality or concurrent process is called The Augmented Environment. The key research attempt explores man-machine interaction process in both synchronous converging trajectories. The analysis therefore addresses from the consideration of this dual nature, focusing simultaneously in humanizing digital domain process or how the computer fits the natural condition of human beings, and in digitalizing human beings or how it affords the digital imperative. The analysis is structured from the panoptic condition of the event scope: the fourth wall as screen that structures the convergence of physical and digital environments. The examination of The Augmented Environment’s assembly pretends the verification of the central point of this research: the dimensional multiplication of physical space by extending informational fields from the digital domain, and its effects on the construction of the Augmented Environment new digital ecology. This circumstance occurs after the arrival of the Digital Revolution in the second half of the twentieth century, with the consequent increase in the interaction between digital and physical environments, and the reach of a higher level of communication in architectural processes. The Augmented Environment signs are alive nowadays; in that sense, the thesis reaches a diagnostic of the changes. The fracture and obsolescence of the time-space limit established by historic dichotomies as private-public, home-city, working-leisure...etc., or the validity of the procedural design are some of its consequences on the architectural discipline.

Enhancement of a body area network to support smart health monitoring at the digital home

The deployment of home-based smart health services requires effective and reliable systems for personal and environmental data management. ooperation between Home Area Networks (HAN) and Body Area Networks (BAN) can provide smart systems with ad hoc reasoning information to support health care. This paper details the implementation of an architecture that integrates BAN, HAN and intelligent agents to manage physiological and environmental data to proactively detect risk situations at the digital home. The system monitors dynamic situations and timely adjusts its behavior to detect user risks concerning to health. Thus, this work provides a reasoning framework to infer appropriate solutions in cases of health risk episodes. Proposed smart health monitoring approach integrates complex reasoning according to home environment, user profile and physiological parameters defined by a scalable ontology. As a result, health care demands can be detected to activate adequate internal mechanisms and report public health services for requested actions.

Sistema de autenticación accesible para el hogar digital

El Hogar Digital Accesible (HDA) de la ETSIST nace con el propósito de acercar las nuevas Tecnologías de la Información a las personas que precisan de necesidades concretas de accesibilidad y usabilidad, dotándoles de herramientas que les permitan aumentar su calidad de vida, confort, seguridad y autonomía. El entorno del HDA consta de elementos de control para puertas, persianas, iluminación, agua o gas, sensores de temperatura, incendios, gas, sistemas de climatización, sistemas de entretenimiento y sistemas de seguridad tales como detectores de presencia y alarmas. Todo ello apoyado sobre una arquitectura de red que proporciona una pasarela residencial y un acceso a banda ancha. El objetivo principal de este PFG ha sido el desarrollo de un sistema de autenticación para el Hogar Digital Accesible de bajo coste. La idea de integrar un sistema de autenticación en el HDA, surge de la necesidad de proteger de accesos no deseados determinados servicios disponibles dentro de un ámbito privado. Algunos de estos servicios pueden ser tales como el acceso a la lectura de los mensajes disponibles en el contestador automático, el uso de equipos multimedia, la desconexión de alarmas de seguridad o simplemente la configuración de ambientes según el usuario que esté autenticado (intensidad de luz, temperatura de la sala, etc.). En el desarrollo han primado los principios de accesibilidad, usabilidad y seguridad necesarios para la creación de un entorno no invasivo, que permitiera acreditar la identidad del usuario frente al sistema HDA. Se ha planteado como posible solución, un sistema basado en el reconocimiento de un trazo realizado por el usuario. Este trazo se usará como clave de cara a validar a los usuarios. El usuario deberá repetir el trazado que registró en el sistema para autenticarse. Durante la ejecución del presente PFG, se justificará la elección de este mecanismo de autenticación frente a otras alternativas disponibles en el mercado. Para probar la aplicación, se ha podido contar con dos periféricos de distintas gamas, el uDraw creado para la PS3 que se compone de una tableta digitalizadora y un lápiz que permite recoger los trazos realizados por el usuario de forma inalámbrica y la tableta digitalizadora Bamboo de Wacom. La herramienta desarrollada permite a su vez, la posibilidad de ser usada por otro tipo de dispositivos como es el caso del reloj con acelerómetro de 3 ejes de Texas Instruments Chronos eZ430 capaz de trasladar los movimientos del usuario al puntero de un ratón. El PFG se encuentra dividido en tres grandes bloques de flujo de trabajo. El primero se centra en el análisis del sistema y las tecnologías que lo componen, incluyendo los distintos algoritmos disponibles para realizar la autenticación basada en reconocimiento de patrones aplicados a imágenes que mejor se adaptan a las necesidades del usuario. En el segundo bloque se recoge una versión de prueba basada en el análisis y el diseño UML realizado previamente, sobre la que se efectuaron pruebas de concepto y se comprobó la viabilidad del proyecto. El último bloque incluye la verificación y validación del sistema mediante pruebas que certifican que se han alcanzado los niveles de calidad necesarios para la consecución de los objetivos planteados, generando finalmente la documentación necesaria. Como resultado del trabajo realizado, se ha obtenido un sistema que plantea una arquitectura fácilmente ampliable lograda a través del uso de técnicas como la introspección, que permiten separar la lógica de la capa de negocio del código que la implementa, pudiendo de forma simple e intuitiva sustituir código mediante ficheros de configuración, lo que hace que el sistema sea flexible y escalable. Tras la realización del PFG, se puede concluir que el producto final obtenido ha respondido de forma satisfactoria alcanzando los niveles de calidad requeridos, siendo capaz de proporcionar un sistema de autenticación alternativo a los convencionales, manteniendo unas cotas de seguridad elevadas y haciendo de la accesibilidad y el precio sus características más reseñables. ABSTRACT. Accessible Digital Home (HDA) of the ETSIST was created with the aim of bringing the latest information and communications technologies closer to the people who has special needs of accessibility and usability increasing their quality of life, comfort, security and autonomy. The HDA environment has different control elements for doors, blinds, lighting, water or gas, temperature sensors, fire protection systems, gas flashover, air conditioning systems, entertainments systems and security systems such as intruders detectors and alarms. Everything supported by an architecture net which provides a broadband residential services gateway. The main goal of this PFG was the development of a low-cost authentication system for the Accessible Digital Home. The idea of integrating an authentication system on the HDA, stems from the need to safeguard certain private key network resources from unauthorized access. Some of said resources are the access to the answering machine messages, the use of multimedia devices, the alarms deactivation or the parameter settings for each environment as programmed by the authenticated user (light intensity, room temperature, etc.). During the development priority was given to concepts like accessibility, usability and security. All of them necessary to create a non invasive environment that allows the users to certify their identity. A system based on stroke pattern recognition, was considered as a possible solution. This stroke is used as a key to validate users. The user must repeat the stroke that was saved on the system to validate access. The selection of this authentication mechanism among the others available options will be justified during this PFG. Two peripherals with different ranges were used to test the application. One of them was uDraw design for the PS3. It is wireless and is formed by a pen and a drawing tablet that allow us to register the different strokes drawn by the user. The other one was the Wacom Bamboo tablet, that supports the same functionality but with better accuracy. The developed tool allows another kind of peripherals like the 3-axes accelerometer digital wristwatch Texas Instruments Chronos eZ430 capable of transfering user movements to the mouse cursor. The PFG is divided by three big blocks that represent different workflows. The first block is focused on the system analysis and the technologies related to it, including algorithms for image pattern recognition that fits the user's needs. The second block describes how the beta version was developed based on the UML analysis and design previously done. It was tested and the viability of the project was verified. The last block contains the system verification and validation. These processes certify that the requirements have been fulfilled as well as the quality levels needed to reach the planned goals. Finally all the documentation has been produced. As a result of the work, an expandable system has been created, due to the introspection that provides the opportunity to separate the business logic from the code that implements it. With this technique, the code could be replaced throughout configuration files which makes the system flexible and highly scalable. Once the PFG has finished, it must therefore be concluded that the final product has been a success and high levels of quality have been achieved. This authentication tool gives us a low-cost alternative to the conventional ones. The new authentication system remains security levels reasonably high giving particular emphasis to the accessibility and the price.