A study on the modeling of sandwich functionally graded particulate composites

Dual-phase functionally graded materials are a particular type of composite materials whose properties are tailored to vary continuously, depending on its two constituent's composition distribution, and which use is increasing on the most diverse application fields. These materials are known to provide superior thermal and mechanical performances when compared to the traditional laminated composites, exactly because of this continuous properties variation characteristic, which enables among other advantages smoother stresses distribution profile. In this paper we study the influence of different homogenization schemes, namely the schemes due to Voigt, Hashin-Shtrikman and Mod-Tanaka, which can be used to obtain bounds estimates for the material properties of particulate composite structures. To achieve this goal we also use a set of finite element models based on higher order shear deformation theories and also on first order theory. From the studies carried out, on linear static analyses and on free vibration analyses, it is shown that the bounds estimates are as important as the deformation kinematics basis assumed to analyse these types of multifunctional structures. Concerning to the homogenization schemes studied, it is shown that Mori-Tanaka and Hashin-Shtrikman estimates lead to less conservative results when compared to Voigt rule of mixtures.

Assessment of data-driven modeling strategies for water delivery canals

Conferência: CONTROLO’2012 - 16-18 July 2012 - Funchal

Extraction of volatile oil from aromatic plants with supercritical carbon dioxide: experiments and modeling

An overview of the studies carried out in our laboratories on supercritical fluid extraction (SFE) of volatile oils from seven aromatic plants: pennyroyal (Mentha pulegium L.), fennel seeds (Foeniculum vulgare Mill.), coriander (Coriandrum sativum L.), savory (Satureja fruticosa Beguinot), winter savory (Satureja montana L.), cotton lavender (Santolina chamaecyparisus) and thyme (Thymus vulgaris), is presented. A flow apparatus with a 1 L extractor and two 0.27 L separators was built to perform studies at temperatures ranging from 298 to 353 K and pressures up to 30.0 MPa. The best compromise between yield and composition compared with hydrodistillation (HD) was achieved selecting the optimum experimental conditions of extraction and fractionation. The major differences between HD and SFE oils is the presence of a small percentage of cuticular waxes and the relative amount of thymoquinone, an oxygenated monoterpene with important biological properties, which is present in the oils from thyme and winter savory. On the other hand, the modeling of our data on supercritical extraction of volatile oil from pennyroyal is discussed using Sovova's models. These models have been applied successfully to the other volatile oil extractions. Furthermore, other experimental studies involving supercritical CO2 carried out in our laboratories are also mentioned.

A new least-squares approach to differintegration modeling

Signal Processing, Vol. 86, nº 10

Agile modeling data warehouse development

Most of the traditional software and database development approaches tend to be serial, not evolutionary and certainly not agile, especially on data-oriented aspects. Most of the more commonly used methodologies are strict, meaning they’re composed by several stages each with very specific associated tasks. A clear example is the Rational Unified Process (RUP), divided into Business Modeling, Requirements, Analysis & Design, Implementation, Testing and Deployment. But what happens when the needs of a well design and structured plan, meet the reality of a small starting company that aims to build an entire user experience solution. Here resource control and time productivity is vital, requirements are in constant change, and so is the product itself. In order to succeed in this environment a highly collaborative and evolutionary development approach is mandatory. The implications of constant changing requirements imply an iterative development process. Project focus is on Data Warehouse development and business modeling. This area is usually a tricky one. Business knowledge is part of the enterprise, how they work, their goals, what is relevant for analyses are internal business processes. Throughout this document it will be explained why Agile Modeling development was chosen. How an iterative and evolutionary methodology, allowed for reasonable planning and documentation while permitting development flexibility, from idea to product. More importantly how it was applied on the development of a Retail Focused Data Warehouse. A productized Data Warehouse built on the knowledge of not one but several client needs. One that aims not just to store usual business areas but create an innovative sets of business metrics by joining them with store environment analysis, converting Business Intelligence into Actionable Business Intelligence.

Modeling of a solid-state bipolar blumlein generator for N stages

This paper models an n-stage stacked Blumlein generator for bipolar pulses for various load conditions. Calculation of the voltage amplitudes in time domain at the load and between stages is described for an n-stage generator. For this, the reflection and transmission coefficients are mathematically modeled where impedance discontinuity occurs (i.e., at the junctions between two transmission lines). The mathematical model developed is assessed by comparing simulation results to experimental data from a two-stage Blumlein solid-state prototype.

Numerical 3D modeling of heat transfer in human tissues for microwave radiometry monitoring of Brown fat metabolismo

Background: Brown adipose tissue (BAT) plays an important role in whole body metabolism and could potentially mediate weight gain and insulin sensitivity. Although some imaging techniques allow BAT detection, there are currently no viable methods for continuous acquisition of BAT energy expenditure. We present a non-invasive technique for long term monitoring of BAT metabolism using microwave radiometry. Methods: A multilayer 3D computational model was created in HFSS™ with 1.5 mm skin, 3-10 mm subcutaneous fat, 200 mm muscle and a BAT region (2-6 cm3) located between fat and muscle. Based on this model, a log-spiral antenna was designed and optimized to maximize reception of thermal emissions from the target (BAT). The power absorption patterns calculated in HFSS™ were combined with simulated thermal distributions computed in COMSOL® to predict radiometric signal measured from an ultra-low-noise microwave radiometer. The power received by the antenna was characterized as a function of different levels of BAT metabolism under cold and noradrenergic stimulation. Results: The optimized frequency band was 1.5-2.2 GHz, with averaged antenna efficiency of 19%. The simulated power received by the radiometric antenna increased 2-9 mdBm (noradrenergic stimulus) and 4-15 mdBm (cold stimulus) corresponding to increased 15-fold BAT metabolism. Conclusions: Results demonstrated the ability to detect thermal radiation from small volumes (2-6 cm3) of BAT located up to 12 mm deep and to monitor small changes (0.5°C) in BAT metabolism. As such, the developed miniature radiometric antenna sensor appears suitable for non-invasive long term monitoring of BAT metabolism.

Modeling radionuclides dispersion and deposition downwind of a coal-fired power plant

In this study the inhalation doses and respective risk are calculated for the population living within a 20 km radius of a coal-fired power plant. The dispersion and deposition of natural radionuclides were simulated by a Gaussian dispersion model estimating the ground level activity concentration. The annual effective dose and total risk were 0.03205 mSv/y and 1.25 x 10-8, respectively. The effective dose is lower than the limit established by the ICRP and the risk is lower than the limit proposed by the U.S. EPA, which means that the considered exposure does not pose any risk for the public health.

Mathematical modeling and simulation of heat flow through pultrusion die assembly system for thermoset composites

Pultrusion is an industrial process used to produce glass fibers reinforced polymers profiles. These materials are worldwide used when performing characteristics, such as great electrical and magnetic insulation, high strength to weight ratio, corrosion and weather resistance, long service life and minimal maintenance are required. In this study, we present the results of the modelling and simulation of heat flow through a pultrusion die by means of Finite Element Analysis (FEA). The numerical simulation was calibrated based on temperature profiles computed from thermographic measurements carried out during pultrusion manufacturing process. Obtained results have shown a maximum deviation of 7%, which is considered to be acceptable for this type of analysis, and is below to the 10% value, previously specified as maximum deviation. © 2011, Advanced Engineering Solutions.

Epidemia de dengue en Nicaragua, 1985

En el segundo semestre de 1985, coincidiendo con el período de lluvias se produjo en Nicaragua una epidemia de Dengue en la que se reportaron 17,483 casos. La mayor morbilidad y las más elevadas tasas de ataque se registraron entre Agosto y Noviembre, siendo afectadas fundamentalmente las regiones II (León y Chinandega), III (Managua) y IV (Masaya, Granada, Carazo, Rivas) que acumularon el 89% de los reportes. Estas regiones se corresponden precisamente con las zonas más densamente pobladas ubicadas en la costa del Pacífico, en donde se encuentran los núcleos urbanos mas importantes y populosos del país. León y Chinandega fueron las ciudades mas afectadas, pues reportaron el 41% del total de casos registrados. El 66.8% de los casos eran adultos y el 57.6% del sexo femenino. La tasa global de ataque para el país fue de 55.24 x 10.000 habitantes. Una campaña de lucha antivectorial, fue iniciada de inmediato, manteniéndose en forma intensiva hasta el mes de Octubre. Al final de este período la morbilidad disminuyó considerablemente y la enfermedad entró en una fase de escasos reportes y posiblemente de endemia. Se reportaron 7 adultos fallecidos que fueron considerados como portadores de una FHD/SCD por un grupo mixto de patólogos y clínicos teniendo en cuenta la experiencia adquirida en los pacientes adultos durante la epidemia ocurrida en Cuba en 1981. El brote fue interpretado como una epidemia de Dengue Clásico en la cual se produjeron 7 casos fatales. Se aislaron los serotipos 1 y 2 del Dengue en sueros de fase aguda de pacientes y el serotipo 1 en el de uno de los fallecidos.

Brote de dengue en San Jose de Guaribe, Venezuela: reporte preliminar

Comunicamos nuestra experiencia de un brote de dengue en el Municipio San José de Guaribe, Estado Guárico a mediados de Septiembre y comienzo de Octubre de 1990. Un total de 97 casos sin muertes y el estudio serológico en una muestra problacional mostró virus tipo 2. La pronta intervención y la efectividad de las medidas de control, una atención médica oportuna y un diagnóstico scrológico temprano contribuyeron al control del brote. Esta es la primera descripción de un brote de dengue en el Estado Guárico, Venezuela.

Estudo sobre o diagnóstico laboratorial e sintomas do dengue, durante epidemia ocorrida na região de Ribeirão Preto, SP, Brasil

Uma epidemia de dengue tipo 1 se iniciou em Novembro de 1990 na Região de Ribeirão Preto, Norte do Estado de São Paulo. Foram confirmados por exames laboratoriais cerca de 3.500 casos até fevereiro de 1991. A Unidade de Pesquisa em Virologia da Faculdade de Medicina de Ribeirão Preto - USP, estudou soros de 502 pessoas suspeitas de apresentarem dengue. Fez-se o diagnóstico sorológico através do método da inibição da hemaglutinação (HAI) para dengue tipo 1 em 19% dos analisados. Passou-se a utlilizar um teste imuno-enzimático para dengue em culturas celulares infectadas (EIA-ICC), que permite identificação simultânea de IgG e IgM. O EIA-ICC embora menos sensível quando comparado ao HAI (89%), mostrou-se mais eficiente, porque: dispensou a obtenção de segundas amostras séricas para o diagnóstico; trata-se de técnica simples, podendo ser efetuada em apenas 5 horas. O vírus dengue tipo 1 foi isolado do sangue de 21 pacientes, por inoculação em células de mosquitos C6/36. Fez-se a identificação dos vírus isolados por método de imunofluorescência indireta, utilizando anti-soro contra todos os flavivirus e anticorpos monoclonais tipo-específicos de dengue. Os sintomas mais freqüentemente observados em 71 indivíduos com diagnóstico de dengue confirmado foram febre (90% dos casos), mialgias (57%) e artralgias (41%)

Epidemia de febre clássica de dengue causada pelo sorotipo 2 em Araguaiana, Tocantins, Brasil

Registramos a ocorrência de epidemia de dengue causada pelo sorotipo 2 (DEN 2) na cidade de Araguaina, estado do Tocantins (TO) situado no Brasil central. Quatrocentos indíviduos de 74 famílias, residentes nos bairros S. João, Araguaina Sul e Neblina foram entrevistados e sangrados, independentemente de terem adoecido ou não. Os soros tanto de adultos quanto de crianças de ambos os sexos foram usados para pesquisa de anticorpos inibidores da hemaglutinação (IH) e IgM através de ensaio imunoenzimático (MAC ELISA). Nas casas onde haviam doentes no momento do inquérito, sangue total também foi colhido para tentativa de isolamento de vírus. O quadro clínico apresentado pelos pacientes foi caracterizado por febre, cefaléia, mialgias, artralgias e exantema do tipo máculo-papular não pruriginoso. A infecção foi mais frequente em mulheres (33.9%) do que nos homens (23.8%), ocorrendo em todas as faixas etárias, inclusive em crianças com menos de um ano de idade, bem como em maiores de 70 anos. Um total de 1105 mosquitos (56 fêmeas e 45 machos de Culex quinquefasciatus e 567 fêmeas e 437 machos de Aedes aegypti) foram obtidos a partir de larvas coletadas em Araguaina. As fêmeas de Ae. aegypti obtidas das larvas fizeram repasto sangüíneo em 8 pacientes febris. O diagnóstico laboratorial foi feito por isolamento de vírus (cultura de células de Aedes albopictus, clone C6/36) e por sorologia (IH e MAC ELISA). Foram isoladas 5 amostras de DEN 2 de pacientes febris e tipadas por imunofluorescência indireta usando anticorpos monoclonais de dengue. Nenhuma amostra viral foi isolada de mosquitos. Outrossim, comprovou-se infecção em 111 pessoas sangradas, o que revelou um índice de positividade de 27.75% (111 em 400), sendo que 66.2% das famílias estudadas apresentaram pelo menos um indivíduo positivo. Ocorreram ainda, 26.1% de infecções assintomáti-cas. Por outro lado, a correlação de positividade entre os dois testes usados (IH e MAC ELISA) foi de 94.6%. Estimamos que ocorreram aproximadamente 83.250 casos da doença, entre 15 de março a 31 de maio de 1991. Esta é a primeira epidemia de DEN 2 em um estado da Amazônia Brasileira, portanto em área endêmica de febre amarela, e a primeira evidência da interiorização do DEN 2, até então restrito ao Rio de Janeiro.

Dengue epidemic in the state of Rio de Janeiro, Brazil: virological and epidemiological aspects

Laboratorial studies were carried out on 3178 patients with signs and symptoms suggestive of dengue infection from April 1986 to December 1987 in the State of Rio de Janeiro, Brazil. The epidemic had two peaks following the first virus isolation and affected the inhabitants of 17 counties. Both sex and all age groups were affected. Dengue virus type 1 was isolated from 1039 sera and the number of confirmed cases was increased to 1874 (59%) by MAC-ELISA. Isolation rate confirmed cases reached 80% in the specimens obtained until the 4th day after the onset of disease and viraemia ranged from 10 3.0 to 10(8.5) TCID50/ml.

Distributed controllers modeling through Petri nets with multi-asynchronous-channels

This paper proposes the concept of multi-asynchronous-channel for Petri nets. Petri nets extended with multi-asynchronous-channels and time-domains support the specification of distributed controllers, where each controller has a synchronous execution but the global system is asynchronous (globally-asynchronous locally-synchronous systems). Each multi-asynchronous-channel specify the interaction between two or more distributed controllers. These channels, together with the time-domain concept, ensure the creation of network-independent models to support implementations using heterogeneous communication networks. The created models support not only the systems documentation but also their validation and implementation through simulation tools, verification tools, and automatic code generators. An application example illustrates the use of a Petri net class extended with the proposed channels. © 2015 IEEE.