Sweet Corn Cultivar Trial

The 2011 sweet corn cultivar trial evaluated 20 sugary enhanced (se) and synergistic (se/sh2) cultivars having bicolored kernels to identify good production and ear characteristics for local marketing or short-distance shipping.

Yields of Corn, Soybeans, and Alfalfa in Western Iowa: 1990 to 2011

The ISU Western Research Farm, Castana, Iowa is one of the oldest in Iowa dating to 1946. It also has a unique location in the loess hills of western Iowa. The research farm was set up to study the deep loess soils, particularly crop production and soil conservation methods. Although the work at the research farm has transitioned away from traditional plot work, yields of major crops grown at the farm, and climate data are collected each year. Crop yields are a reflection of current technologies and weather. In western Iowa, rainfall is especially critical and is often the limiting factor.

Seasonal and Rotational Influences on Corn Nitrogen Requirements

This project was designed to study the N fertilization needs in continuous corn (CC) and corn rotated with soybean (SC) as influenced by location and climate. Multiple rates of fertilizer N were spring applied, with the intent to measure yield response to N within each rotation on a yearly basis for multiple years at multiple sites across Iowa. This will allow determination of N requirements for each rotation, differences that exist between the two rotations, responses to applied N across different soils and climatic conditions, and evaluation of tools used to adjust N application.

Evaluation of a Blended Refuge for Corn Rootworm

The purpose of this study was to evaluate the effectiveness of the blended refuge concept against corn rootworms. The treatments evaluated include a pure stand of Herculex XTRA (HXX), a pure stand of Roundup Ready 2 (RR2), a pure stand of RR2 with Force 3G applied overtop, and two treatments with the refuge in a bag concept–one with 95 percent HXX and a 5 percent RR2 blended refuge and the other with 90 percent HXX and a 10 percent RR2 blended refuge.

Placement Methods of Phosphorus and Potassium for Corn and Soybean Managed with No-till and Chisel-plow/Disk Tillage

No-till management limits the incorporation of crop residue and fertilizer with soil resulting in wetter, colder soils and the accumulation of organic matter, phosphorus (P), and potassium (K) near the soil surface. Banding of P and K could be more effective than broadcast fertilization by counteracting stratification, applying nutrients in the root zone (starter effect), and minimizing reactions with the soil that may reduce their availability to plants. Therefore, this long-term study was established in 1994 to evaluate P and K fertilizer placement methods and grain yield of corn-soybean rotations managed with notill and chisel-plow/disk tillage.

Corn Response to Sulfur Application Rate

Historically, sulfur (S) application has not been recommended on Iowa soils for corn and soybean production. Soils supply, or a combination from sources such as soil organic matter, profile sulfate, manure, and precipitation have met crop S needs. However, over the past few years, S deficiencies in alfalfa and corn have been documented. Large crop yield responses have been measured in some fields containing soils with low organic matter, side-slope landscape position, or coarse soil texture, especially in northeastern Iowa. The objective of this study was to determine S response in corn and soybean in north-central Iowa.

Effects of Seed Treatments and a Soil-applied Nematicide on Corn Yields and Nematode Population Densities

Plant-parasitic nematodes are microscopic worms that feed on plants. Almost every nematode that feeds on corn is capable of feeding on many other plants. These nematode parasites are thought to be native to most Iowa soils and to have fed upon native plants before corn was grown as a cultivated crop. Population densities (numbers) of most species of plant-parasitic nematodes that feed on corn have to increase to damaging levels (called damage thresholds) before yield loss occurs. Products that are currently available to manage plant-parasitic nematodes on corn in the state include the soil-applied insecticide/nematicide Counter® and two relatively new protectant seed treatments, Avicta® and Votivo®. Counter® is a contact and systematic nematicide with the active ingredient terbufos. Avicta® is a contact nematicide (active ingredient abamectin) that moves on the surface of the root, and Votivo® is a special strain of the natural soil bacterium Bacillus firmus that grows on the root. Counter® is available from AMVAC, Avicta® from Syngenta Seedcare, and Votivo® from Bayer CropScience. The objective of this experiment was to assess and compare the nematode population densities and yields of corn growing in plots with and without the seed-treatment nematode protectants and the soil-applied nematicide Counter®.

Evaluation of Bt and Non-Bt Corn with and without Soil Insecticides for Control of Corn Rootworm

The purpose of this study was to evaluate the effectiveness of Bt corn and soil insecticides, either alone or in combination, for the control of corn rootworm. Evaluation of Bt hybrids included SmartStax, SmartStax with a blended refuge (refuge in the bag), and Herculex XTRA. Soil insecticides evaluated were SmartChoice-SB, Counter-SB, Aztec, and Force.

Effects of Seed Treatments and a Soil-applied Nematicide on Corn Yields and Nematode Population Densities

Plant-parasitic nematodes are microscopic worms that feed on plants. Almost every nematode that feeds on corn is capable of feeding on many other plants. These nematode parasites are thought to be native to most Iowa soils and to have fed on native plants before corn was grown as a cultivated crop. Population densities (numbers) of most species of plant-parasitic nematodes that feed on corn have to increase to damaging levels (called damage thresholds) before yield loss occurs.

Drought Tolerant Corn Strip Trial

The strip trial was designed to evaluate new drought tolerant corn hybrids for yield. Three of these drought tolerant hybrids were planted with other hybrids for comparison.

Effectiveness of Foliar Fungicides by Timing on Hybrid Corn in Iowa

Fungicide use on hybrid corn has increased considerably in the past three growing seasons primarily due to reports of increased yields, even in the absence of disease and higher corn prices. A number of fungicides are registered for use on corn. The objectives of this project were to 1) evaluate the yield response of hybrid corn to foliar fungicide application, 2) compare the yield response of various products and timing of application, and 3) to assess the effect of fungicide application on stalk rot development.

Effectiveness of Foliar Fungicides by Timing on Hybrid Corn

Fungicides were rarely used on hybrid corn prior to 2007, however, in the past few years some farmers have made fungicides a regular input in their crop production, particularly as the value of grain has increased. Fungicides are recommended for foliar disease management to protect yield potential. There have also been reports of increased yields in the absence of disease. A number of fungicides are registered for use on corn. The objectives of this project were to evaluate the yield response of hybrid corn to foliar fungicide application at various timings.

Seasonal and Rotational Influences on Corn Nitrogen Requirements

This project was designed to study the N fertilization needs in continuous corn (CC) and corn rotated with soybean (SC) as influenced by location and climate. Multiple rates of fertilizer N were spring applied, with the intent to measure yield response to N within each rotation on a yearly basis for multiple years at multiple sites across Iowa. This will allow the determination of N requirements for each rotation, differences that exist between the two rotations, responses to applied N across different soils and climatic conditions, and evaluation of tools used to adjust N application.

Evaluation of the attack rates and level of damages by the fall armyworm, Spodoptera frugiperda (Lepidoptera: Noctuidae), affecting corn-crops in the northeast of Argentina

The fall armyworm (FAW) is the most important threat to corn crops in Argentina, and there exists very little up-to-date information on its actual pest status because the available literature was published more than 20 years ago. Therefore, field surveys were carried out in the northeast of Argentina, in order to establish the attack rates and injury levels of the pest in relation to the crop phenology. The study was carried out at two localities: Colonia Benítez, an agricultural region, and Tapenagá, a cattle-raising area. At each site two 1-ha plots were sown either with a Bt-corn expressing Cry 1F protein or with an untransformed corn germplasm. Optimal and late sowing was assayed and FAW larval abundance, relative age composition, attack rates and level of damage to corn were recorded. At the moment of the field experiments, Bt-corn was not affected by FAW larvae. However, untransformed germplasms were severely affected by FAW larvae, with an average of attacked plants of 18% or more. In contrast to data obtained 30 years ago, higher values of FAW density were registered. Levels of damage to corn plants were higher after the V4 stage. It was found that the sowing date affected the infestation levels and early seeding avoided high armyworm densities that develop later in the season; in northern Argentina, this was only relevant in agricultural areas.

Determination of the mechanical properties of corn grains and olive fruits required in DEM simulations

Discrete element method (DEM) is a numerical technique widely used for simulating the mechanical behavior of granular materials involved in many food and agricultural industry processes. Additionally, this technique is also a powerful tool to understand many complex phenomena related to the mechanics of granular materials. However, to make use of the potential of this technique it is necessary to develop DEM models capable of representing accurately the reality. For that, among some other questions, it is essential that the values of the microscopic material properties used to define the numerical model are accurately determined.