A simple and environmentally friendly reflectometric method for the rapid quantitative analysis of captopril in pharmaceutical formulations

This paper describes a simple, environmentally friendly and rapid quantitative spot test procedure for the determination of captopril (CPT) in bulk drug and in pharmaceutical formulations by using diffuse reflectance spectroscopy. The proposed method is based on the reflectance measurements of the orange compound (λ max 490 nm) produced by the spot test reaction between CPT and p-chloranil (CL). Under optimal conditions, calibration curves were obtained for CPT by plotting the optical density of the reflectance signal (A R) vs. the log of the mol L -1 concentration, from 6.91×10 -3 to 1.17×10 -1, with a good coefficient of determination (R 2 = 0.9992). The common excipients used as additives in pharmaceuticals do not interfere in the proposed method. The method was applied to determine CPT in commercial pharmaceutical formulations. The results obtained by the proposed method are compared favorably with those obtained by an official procedure at 95% confidence level. The method validation results showed that the sensitivity and selectivity of the methods were adequated for drug monitoring in industrial quality control laboratories. © 2011 Moment Publication.

Genetic (co)variance components for ratio of lamb weight to ewe metabolic weight as an indicator of ewe efficiency

Data from a multibreed commercial flock located at Mid-West of Brazil, supported by Programa de Melhoramento Genético de Caprinos e Ovinos de Corte (GENECOC), were used to estimate genetic parameters of traits related to ewe productivity by Average Information Restricted Maximum Likelihood method applied to an animal model. The analyzed traits were litter weight at birth (LWB) and at weaning (LWW), ewe weight at weaning (EW) and ewe production efficiency, estimated by WEE=LWW/EW 0.75. The heritabilities were 0.26±0.05, 0.32±0.06, 0.37±0.03 and 0.10±0.02 for LWB, LWW, EW and WEE, respectively. Significant effects for direct heterosis were observed for LWW and EW. Recombination losses were important for EW and WEE. Genetic correlations of LWB with LWW, EW and WEE were 0.68, 0.37 and 0.15, respectively; of LWW with EW and WEE were 0.30 and 0.34, respectively; and between EW and WEE was -0.25. Even though it is a low heritability trait, WEE can be indicated as a selection criteria for improving the ewe productivity without increasing the mature weight of animals due to its genetic correlations with LWW and other traits. © 2011 Elsevier B.V.

Notes on the measurement of poverty by the income method

Includes bibliography

EMG activity of trunk stabilizer muscles during Centering Principle of Pilates Method

This study aimed to analyze the electromyographic (EMG) activity of iliocostalis lumborum (IL), internal oblique (IO) and multifidus (MU) and the antagonist cocontraction (IO/MU and IO/IL) during the performance of Centering Principle of Pilates Method. Participating in this study were eighteen young and physically fit volunteers, without experience in Pilates Method, divided in two groups: low back pain group (LBPG, n = 8) and control group (CG, n = 10). Two isometric contractions of IO muscles (Centering Principle) were performed in upright sitting posture. EMG signal amplitude was calculated by Root Mean Square (RMS), which was normalized by RMS maximum value. The common area method to calculate the antagonist cocontraction index was used. MU and IO activation and IO/MU cocontraction (. p < 0.05) were higher in CG. The CG therefore showed a higher stabilizer muscles recruitment than LBPG during the performance of Centering Principle of Pilates Method. © 2012 Elsevier Ltd.

A useful empirical bayesian method to analyse industrial data from saturated factorial designs

The use of saturated two-level designs is very popular, especially in industrial applications where the cost of experiments is too high. Standard classical approaches are not appropriate to analyze data from saturated designs, since we could only get the estimates of the main factor effects and we would not have degrees of freedom to estimate the variance of the error. In this paper, we propose the use of empirical Bayesian procedures to get inferences for data obtained from saturated designs. The proposed methodology is illustrated assuming a simulated data set. © 2013 Growing Science Ltd. All rights reserved.

Speed estimation for induction motor using neural networks method

This work presents an alternative approach based on neural network method in order to estimate speed of induction motors, using the measurement of primary variables such as voltage and current. Induction motors are very common in many sectors of the industry and assume an important role in the national energy policy. The nowadays methodologies, which are used in diagnosis, condition monitoring and dimensioning of these motors, are based on measure of the speed variable. However, the direct measure of this variable compromises the system control and starting circuit of an electric machinery, reducing its robustness and increasing the implementation costs. Simulation results and experimental data are presented to validate the proposed approach. © 2003-2012 IEEE.

Interação genótipo-ambiente para a produção de leite em bubalinos no Brasil e na Colômbia

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Padrões de dominância manual, podálica e performance motora em gêmeos

O método de gêmeos envolve a análise diferencial de gêmeos monozigóticos (MZs) e dizigóticos (DZs) a fim de determinar a proporção de variância em um determinado traço atribuível a fatores genéticos e ambientais. Sendo geneticamente idênticos, os gêmeos MZs tendem a apresentar alto índice de concordância em vários atributos comportamentais, enquanto que, os DZs, compartilham 50 % da carga genética, manifestando um reduzido grau de concordância. Todavia, pesquisadores têm investigado possíveis mecanismos genéticos subjacentes do desenvolvimento cerebral para dominância manual e, não têm encontrado utilidade no método de gêmeos, pois, desde 1924, em todos os estudos de dominância manual em gêmeos, a taxa de discordância para o canhotismo e destrimanismo têm sido similares em MZs e DZs. Além disso, frequentemente gêmeos mostram taxa mais alta de prevalência para o canhotismo que os não gêmeos. O objetivo deste estudo foi investigar as possíveis diferenças entre gêmeos destros e canhotos (MZs e DZs combinados) e não gêmeos em variáveis fenótipicas específicas relacionadas à dominância manual, incluindo dominância podálica (chute de penalty), consistência de dominância manual, canhotismo familiar (CF+), postura manual e medidas de habilidades motoras em três testes : Batidas digitais, Tabuleiro de Annett e Pontilhar Pontinhos. Foram avaliados 286 gêmeos ( 255 destros, 34 canhotos) e, 251 não gêmeos (141 destros e 110 canhotos). A análise dos dados revelou o aumento de canhotismo no sexo masculino em três vezes mais do que no feminino. Além disto, destros e canhotos gêmeos foram mais mistos em suas dominâncias manuais e apontaram alta incidência de CF+ entre parentes de primeiro grau que não gêmeos canhotos e destros. Em concordância com estudos anteriores, a frequência de chute contralateral foi mais alta nos mistos do que nos que apresentaram consistência na dominância manual, especialmente entre os canhotos. No que diz respeito à habilidade manual, não foram encontradas diferenças significativas nos três testes de habilidade manual. Conforme as expectativas, destros e canhotos foram mais proficientes na manipulação do estímulo com suas mãos dominantes. Em todas as três medidas, em contraste com os destros, os canhotos (gêmeos e não gêmeos) apresentaram redução entre as assimetrias manuais. Por extensão, o aumento da prevalência de canhotismo entre gêmeos não poderia ser atribuída a influências patológicas, inversão de assimetria ou ordem de nascimento. É possível, levar em consideração, observando a diferença robusta em dominância manual mista que, o padrão de lateralização neuromotora, pode ser mais difusamente organizado nos hemisférios dos gêmeos que em não gêmeos, mas, esta sugestão requer evidência direta, pelo menos a partir de testes de neuro-imagem.

Influence of Tapered and External Hexagon Connections on Bone Stresses Around Tilted Dental Implants: Three-Dimensional Finite Element Method With Statistical Analysis

Background: The purpose of this study is to analyze the tension distribution on bone tissue around implants with different angulations (0 degrees, 17 degrees, and 30 degrees) and connections (external hexagon and tapered) through the use of three-dimensional finite element and statistical analyses.Methods: Twelve different configurations of three-dimensional finite element models, including three inclinations of the implants (0 degrees, 17 degrees, and 30 degrees), two connections (an external hexagon and a tapered), and two load applications (axial and oblique), were simulated. The maximum principal stress values for cortical bone were measured at the mesial, distal, buccal, and lingual regions around the implant for each analyzed situation, totaling 48 groups. Loads of 200 and 100 N were applied at the occlusal surface in the axial and oblique directions, respectively. Maximum principal stress values were measured at the bone crest and statistically analyzed using analysis of variance. Stress patterns in the bone tissue around the implant were analyzed qualitatively.Results: The results demonstrated that under the oblique loading process, the external hexagon connection showed significantly higher stress concentrations in the bone tissue (P < 0.05) compared with the tapered connection. Moreover, the buccal and mesial regions of the cortical bone concentrated significantly higher stress (P < 0.005) to the external hexagon implant type. Under the oblique loading direction, the increased external hexagon implant angulation induced a significantly higher stress concentration (P = 0.045).Conclusions: The study results show that: 1) the oblique load was more damaging to bone tissue, mainly when associated with external hexagon implants; and 2) there was a higher stress concentration on the buccal region in comparison to all other regions under oblique load.

Toxicidade do cloridrato de doxorrubicina na dose de 120mg/m², em cadelas com tumor venéreo transmissível

Pós-graduação em Cirurgia Veterinária - FCAV

Maize leaf phytotoxicity and grain yield are affected by nitrogen source and application method

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Tar reduction in downdraft biomass gasifier using a primary method

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sequential sampling of Euschistus heros (Heteroptera: Pentatomidae) in soybean

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Genetic parameters and trends of morphometric traits of GIFT tilapia under selection for weight gain

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influence of soil texture in the recovery of Toxocara canis eggs by a flotation method

In epidemiological surveys, the evaluation of soil contamination by Toxocara canis eggs requires a quick and easy method for the isolation of parasite eggs from soil samples. The efficiency of flotation methods is influenced by sample size, soil texture, degree of soil contamination, pretreatment, flotation solutions and time of flotation. This investigation was designed to evaluate the influence of soil texture in the recovery of T. canis eggs with the centrifugal flotation technique of Dada (Dada, B.J.O., 1979. A new technique for the recovery of Toxocara eggs from soil. J. Helminthol., 53: 141-144). Four types of soil (clay silt, sandy, silty clay and sand) were artificially contaminated with T. canis eggs (200 eggs per gram). Zinc sulphate (specific gravity 1.20) and sodium dichromate (specific gravity 1.35) were used as flotation solutions. Twenty replicated examinations were performed for each type of soil and flotation solution. There was a statistically significant difference in the results depending on soil type. The highest recovery percentages were observed in soils rich in sand (62.5% for sand and 38.0% for sandy soil). Differences were also observed with different flotation solutions. Sodium dichromate solution was more efficient for recovering T. canis eggs, regardless of the soil texture. © 1994.