Mapeamento da isoterma de Curie na Bacia do Parnaíba estimada através da profundidade da base das fontes magnéticas

Located on the western edge of the Brazilian northeast, the Parnaíba Basin is an intra cratonic basin with oil production. This study aims at understanding its genesis and evolution, using aeromagnetic and gravity data. We used the spectral analysis of aeromagnetic data to map the depth to the bottom of the magnetic sources in order to assimilate this depth with the depth of the Curie isotherm, and infer the geothermal gradient. Using the spectral analysis technique, we succeeded in mapping the surface of the depth to the bottom of magnetic sources (SBFM), which marks the depth that occur magnetization. In the Parnaíba Basin the SBFM presented depths around -20,5 and -28,5 , which was consistent with an inversion of the same dataset using the technique of Magnetization Vector Inversion (MVI). Furthermore, SBFM topography correlates well with Moho depth, which was estimated from satellite gravimetric data from the GOCE mission (Gravity Field and Steady-State Ocean Circulation Explorer). Assuming that SBFM coincides with the Curie isotherm of magnetite (ICM), defined as the surface at which magnetite ( ) looses its ferromagnetic properties, it was possible to estimate the geothermal gradient. The geothermal gradient in the basin showed values between 19.2 and 26.5 , allowing to estimate the heat flow for the Parnaíba basin after assuming a conductivity of 2.69 . The resulting heat flow values ranged between 51.6 and 71.3 , which is consistent with values found in other works throughout the South American continent. Lithospheric thickness using an empirical relationship, finding values between -65.8 and -89.2 . We propose that thermal structure of Parnaíba basin is influenced by a deep thermal anomaly. This anomaly has heated the lithosphere beneath the basin and has resulted in relatively thin values for the lithospheric thickness and relatively high surface heat flow values. The origin of the anomaly is not clear, but the correlation between Curie depth and Moho topography, suggests that tectonic extension processes could have played a role.

Estudo de duas pseudoligas de Nb-Cu obtidas pela rota da metalurgia do pó

The Nb-Cu pseudoalloys present themselves as potential substitutes for the alloys from a well known system and already commercially applied, as the W-Cu alloys, used in applications such as heat sinks, electrical contacts and coils for the generation of high magnetic fields. Because it is an immiscible system, where there is mutual insolubility and low wettability of the liquid Cu on the Nb surface, the processing route used in this work was the Powder Metallurgy. Two Nb alloys were used, with additions of 10% and 20% in weight of Cu, and times of 20, 30 and 40 hours for the high energy milling of the starting powders. The milling evolution of the powders is presented through the characterization techniques, such as the LASER diffraction for particle size, XRD, SEM, EDS, DSC, dilatometry, TEM and chemical analysis. After the milling, portions of the loads were submitted to the annealing heat treatment. The process used for the samples consolidation was the hot pressing, which has been applied both on some milled powders samples, as on the annealed powders. Subsequent heat treatments were performed in the samples at temperatures of 1000ºC (solid phase) and 1100ºC (in the Cu liquid phase). All sets of consolidated samples, and also the two sets of the heat treated, were analyzed by XRD, SEM, EDS, density and Vickers microhardness. Moreover, other Nb powder samples with 10% and 20% in weight of Cu obtained by simple mechanical mixing, were consolidated, thermally treated and characterized with the same techniques applied to the others, and the results were compared among themselves. Despite the difficulty of consolidation and densification of the two pseudoalloys of the Nb-Cu system of this study, on the route that passes through the HEM, samples were obtained with densities around 90% of the theoretical density. And, on the processing route of which were only mixed, the values reached up to 97%. Therefore, in this work are also emphasized the processes that made possible these results.

Síntese de ferritas de cobalto e níquel dopadas com zinco e caracterização de suas propriedades eletromagnéticas

This work shows that the synthesis by combustion is a prominent alternative to obtain ceramic powders of higher oxides, nanostructured and of high purity, as the ferrites of formulas Co(1-x)Zn(x)Fe2O4 e Ni(1-x)Zn(x)Fe2O4 with x ranging from 0.2 mols, in a range from 0.2 ≤ x ≥ 1.0 mol, that presents magnetic properties in coexistence of ferroelectric and ferrimagnetic states, which can be used in antennas of micro tapes and selective surfaces of low frequency in a range of miniaturized microwaves, without performance loss. The obtainment occurred through the combustion process, followed by appropriate physical processes and ordered to the utilization of the substrate sinterization process, it gave us a ceramic material, of high purity degree in a nanometric scale. The Vibrating Sample Magnetometer (VSM) analysis showed that those ferritic materials presents parameters, as materials hysteresis, that have own behavior of magnetic materials of good quality, in which the magnetization states can be suddenly changed with a relatively small variation of the field intensity, having large applications on the electronics field. The X-ray Diffraction (XRD) analysis of the ceramic powders synthesized at 900 °C, characterize its structural and geometrical properties, the crystallite size and the interplanar spacing. Other analysis were developed, as Scanning Electron Microscopy (SEM), X-ray Fluorescence (XRF), electric permittivity and the tangent loss, in high frequencies, through the equipment ZVB - 14 Vector Network Analyzer 10 MHz-14 GHz, of ROHDE & SCHWART.

Influência da interação dipolar nas fases magnéticas de nanopartículas esféricas com estrutura núcleo@camada

Bi-magnetic core@shell nanoparticle has attracted attention several researchers because great applicability that they offer. The possibility of combining different functionalities of magnetic materials make them a key piece in many areas as in data processing permanent magnets and biomagnetics sistems. These nanoparticles are controlled by intrinsic properties of the core and shell materials as well as the interactions between them, besides size and geometry effects. Thus, it was developed in this thesis a theoretical study about dipolar interaction contribution between materials different magnetic properties in bi-magnetic core@shell nanoparticles conventional spherical geometry. The materials were analyzed CoFe2O4, MnFe2O4 e CoFe2 in various combinations and sizes. The results show that the impact of the core dipole field in the shell cause reverse magnetization early its, before of the core, in nanoparticle of CoFe2O4(22nm)@CoFe2(2nm), thereby causing a decrease coercivity field of 65% in comparection with simple nanoparticle of CoFe2O4 (HC=13.6 KOe) of same diameter. The large core anisotropy in conventional nanoparticle makes it the a stable dipolar field source in the shell, that varies length scale of the order of the core radius. Furthermore, the impact of dipolar field is greatly enhanced by the geometrical constraints and by magnetics properties of both core@shell materials. In systems with core coated with a thin shell of thickness less than the exchange length, the interaction interface can hold reversal the shell occurring an uniform magnetization reversal, however this effect only is relevant on systems where the dipole field effects is weak compared with the exchange interaction.

Influência da interação dipolar nas fases magnéticas de nanopartículas esféricas com estrutura núcleo@camada

Bi-magnetic core@shell nanoparticle has attracted attention several researchers because great applicability that they offer. The possibility of combining different functionalities of magnetic materials make them a key piece in many areas as in data processing permanent magnets and biomagnetics sistems. These nanoparticles are controlled by intrinsic properties of the core and shell materials as well as the interactions between them, besides size and geometry effects. Thus, it was developed in this thesis a theoretical study about dipolar interaction contribution between materials different magnetic properties in bi-magnetic core@shell nanoparticles conventional spherical geometry. The materials were analyzed CoFe2O4, MnFe2O4 e CoFe2 in various combinations and sizes. The results show that the impact of the core dipole field in the shell cause reverse magnetization early its, before of the core, in nanoparticle of CoFe2O4(22nm)@CoFe2(2nm), thereby causing a decrease coercivity field of 65% in comparection with simple nanoparticle of CoFe2O4 (HC=13.6 KOe) of same diameter. The large core anisotropy in conventional nanoparticle makes it the a stable dipolar field source in the shell, that varies length scale of the order of the core radius. Furthermore, the impact of dipolar field is greatly enhanced by the geometrical constraints and by magnetics properties of both core@shell materials. In systems with core coated with a thin shell of thickness less than the exchange length, the interaction interface can hold reversal the shell occurring an uniform magnetization reversal, however this effect only is relevant on systems where the dipole field effects is weak compared with the exchange interaction.

Evolução morfotectônica da porção centro-sul da Bacia Paraíba

Recent endogenous processes provide dynamic movements in the lithosphere and generate the varied forms of relief, even in areas of passive continental margins, such as the research area of this work located in northeastern Brazil. The reactivation of Precambrian basement structures, after the breakup between South America and Africa in the Cretaceous played an important role in the evolution of basins, which provided generated forms of relief. These morphodynamic characteristics can be easily observed in marginal basins that exhibit strong evidence fault reactivations. The purpose of this study is to investigate the influence of morphotectonic processes in the landscape structuring of Paraíba Basin. Therefore, we used aeromagnetic, high–resolution images of the Shuttle Radar Topographic Mission–SRTM, structural geological data, deep well data and geological field data. Based on the results of the data was observed that some preexisting structures in the crystalline basement coincide with magnetic and topographic lineaments interpreted as fault reactivation of the Post–Miocene units in the Paraíba Basin. Faults that offset lithostratigraphic units provided evidence that tectonic activity associated with the deposition and erosion in the Paraíba Basin occurred from Cretaceous to the Quaternary. The neotectonic activity that occurred in Paraíba Basin was able to influence the deposition of sedimentary units and landforms. It indicates that the deposition of post–Cretaceous units was influenced by reactivation of Precambrian basement structures in this part of the Brazilian continental margin.

Anisotropia magnética em nanofilmes com assimetria cristalográfica

This Thesis comprises a theoretical study about the influence of the magnetocrystalline anisotropy on the static and dynamic magnetic properties of nanofilms: monolayers and trilayers coupled through the bilinear and biquadratic exchange fields, for situations in which the systems are grown in unusual [hkl] asymmetric directions. Using a theory based on a realistic phenomenological model for description of nanometric systems, we consider the total free magnetic energy including the Zeeman interaction, cubic and uniaxial anisotropies, demagnetizing and surface anysotropy energies, as well as the exchange terms. Numerical calculations are conducted by minimizing the total magnetic energy from the determination of equilibrium static configurations. We consider experimental parameters found in the literature to illustrate our results for Fe/Cr/Fe trilayer systems. In particular, a total of six different magnetic scenarios are analyzed for three regimens of exchange fields and the [211] and [321] asymmetric growth directions. After numerically minimize the total energy, we use the equilibrium configurations to calculate magnetization and magnetoresistance curves with the respective magnetic phases and corresponding critical fields. These results are also used to establish the boundary for occurrence of saturated states. Within the context of the spin waves, we solve the equation of motion for these systems in order to find the respective associated dispersion relations. The results show similar magnetization and magnetoresistance curves for both [211] and [321] growth scenarios, including an equivalent magnetic transition behavior. However, the combination of those peculiar symmetries and influence of the exchange energies results in attractive properties, including the generation of magnetic states as a function of the asymmetric degree imposed in the [hkl] growth orientations. There is also an increasing incompatibility between the values of saturation fields of magnetization and magnetoresistance for the cases in which a magnetic field acts along intermediate cubic anisotropic axes, particularly in the situations where the bilinear and biquadratic exchange fields are comparable. The dispersion relations and static results are consistent, the corresponding magnetic states are also present in both acoustic and optical modes. Furthermore, Goldstone excitations are also observed for that particular cases of a magnetic field acting in the intermediate axes, an effect related to transitions of second order and to the spontaneous symmetry breaking imposed by the combination of the biquadratic energy with the cubic and uniaxial anisotropies.

Trasporte eléctrico y magnetismo en sistemas electrodo - aislante - electrodo: hacia el desarrollo de dispositivos del tipo juntura tunel.

La presente tesis es un estudio dedicado a la optimización y desarrollo de sistemas del tipo juntura túnel. La metodología utilizada para la realización de la tesis consistió, en primer lugar, en la optimización de las componentes independientes de la juntura túnel: electrodo y barrera aislante. Posteriormente se optimizaron los procesos de fabricación para el desarrollo y caracterización de dispositivos del tipo juntura túnel en su forma final. En la primera parte de la tesis se analizan detalladamente los resultados obtenidos de la caracterización eléctrica y topografica de barreras aislantes en sistemas electrodo - barrera. Los sistemas bicapas estudiados, GdBa_2Cu_3_7/SrTiO_3, Nb/Ba_0,05Sr_0,95TiO_3 y YBa_2Cu_3O_7/SrTiO_3, fueron caracterizados utilizando un microscopio de fuerza atómica en modo conductor. Se propuso un modelo fenomenológico basado en los resultados experimentales, que permitió la obtención de parámetros críticos para el desarrollo de dispositivos del tipo juntura túnel con nuevas funcionalidades. La información obtenida de la caracterización de los sistemas bicapas (homogeneidad de crecimiento, baja densidad de defectos y de pinholes) indican un muy buen control de los parámetros de crecimiento de las barreras. Por otro lado, se obtuvo un buen comportamiento aislante para espesores mayores a 2 nm sin la presencia de pinholes en la barrera. La similitud en la estequiometría de las barreras (SrTiO_3) permitió comparar los distintos sistemas estudiados en términos de conductividad eléctrica. Se verificó que el modelo fenomenológico permite comparar la conductividad eléctrica de los sistemas mediante uno de los parámetros definidos en el modelo fenomenológico (obtenido de los ajustes lineales de las curvas I(V)). De los 3 sistemas estudiados, las bicapas GdBa_2Cu_3O_7/SrTiO_3 presentaron un mayor valor de longitud de atenuación de los portadores de carga a través de la barrera y una muy baja densidad de defectos superficiales. Las bicapas YBa_2Cu_3O_7/SrTiO_3 y Nb/Ba_0,05Sr_0,95TiO_3 permitieron validar el modelo fenomenológico propuesto para el análisis de la respuesta corriente - voltaje obtenida con el microscopio de fuerza atómica en modo conductor. La segunda parte de la tesis abarca conceptos de magnetismo y microfabricación para el desarrollo de junturas túnel magnéticas. Durante la caracterización de las películas ferromagnéticas individuales de Co_90Fe_10 (CoFe) se logró aumentar valor del campo coercitivo de films de 10 nm de espesor al incrementar la temperatura de depósito. Esto se debe a un aumento del tamaño de grano de los films. El aumento de la temperatura del sustrato durante el crecimiento influye en la morfología y las propiedades magnéticas de los films de CoFe favoreciendo la formación de granos y la pérdida del eje preferencial de magnetización. Estos resultados permitieron la fabricación de sistemas Co_90Fe_10/M_gO/Co_90Fe_10 con distintas orientaciones relativas accesibles con campo magnético para el estudio del acople magnético entre los films de CoFe. La caracterización eléctrica de estos sistemas, particularmente la respuesta corriente - voltaje obtenida con el microscopio de fuerza atómica en modo conductor, indicó que las propiedades de transporte eléctrico de las junturas presentan un alto grado de reproducibilidad. Se analizó además la inuencia del sustrato utilizado en la corriente túnel que atraviesa la barrera aislante. Por otro lado, se discuten los fenómenos relacionados a la optimización de las propiedades magnéticas de electrodos ferromagnéticos para la fabricación de junturas túnel Co_90Fe_10/MgO/Co_90Fe_10 y Co_90Fe_10/MgO /Fe_20Ni_80. En particular, se estudió el acople magnético entre capas ferromagnéticas y la inuencia del sustrato utilizado para el crecimiento de las tricapas. La optimización de los electrodos magnéticos involucró el análisis de la inuencia de la presencia de un aislante entre dos capas magnéticas en el acople de los electrodos. Se logró el desacople de films de 10 nm de Co_90Fe_10 y Fe_20Ni_80 separados por un espaciador de MgO de 2 nm. Finalmente se detallan los pasos para la fabricación de una red de junturas túnel magnéticas y su caracterización eléctrica a bajas temperaturas. El sistema estudiado fue la tricapa Co_90Fe_10 (10 nm)/M_gO (8 nm)/ Fe_20Ni_80 (10 nm) crecido sobre un sustrato de M_gO. La caracterización eléctrica confirmó la buena calidad de la junturas fabricadas. Las junturas obtenidas presentaron un comportamiento altamente resistivo (~ MΩ). Las mediciones de la corriente túnel en función de la temperatura permitieron descartar la presencia de pinholes en la barrera. El transporte de los portadores de carga es por efecto túnel a través de la barrera aislante. Las curvas de conductancia diferencial permitieron calcular el valor medio de la altura de la barrera de potencial (φ = 3.1 eV) a partir del modelo de Brinkman. Los resultados obtenidos en cada uno de los capítulos se complementan y son relevantes para la optimización de junturas túnel, debido a que brindan información crítica para su correcto funcionamiento. En la presente tesis se lograron obtener los primeros avances para la fabricación de arreglos de junturas túnel que permitan el desarrollo de dispositivos.

Trasporte eléctrico y magnetismo en sistemas electrodo - aislante - electrodo: hacia el desarrollo de dispositivos del tipo juntura tunel.

La presente tesis es un estudio dedicado a la optimización y desarrollo de sistemas del tipo juntura túnel. La metodología utilizada para la realización de la tesis consistió, en primer lugar, en la optimización de las componentes independientes de la juntura túnel: electrodo y barrera aislante. Posteriormente se optimizaron los procesos de fabricación para el desarrollo y caracterización de dispositivos del tipo juntura túnel en su forma final. En la primera parte de la tesis se analizan detalladamente los resultados obtenidos de la caracterización eléctrica y topografica de barreras aislantes en sistemas electrodo - barrera. Los sistemas bicapas estudiados, GdBa_2Cu_3_7/SrTiO_3, Nb/Ba_0,05Sr_0,95TiO_3 y YBa_2Cu_3O_7/SrTiO_3, fueron caracterizados utilizando un microscopio de fuerza atómica en modo conductor. Se propuso un modelo fenomenológico basado en los resultados experimentales, que permitió la obtención de parámetros críticos para el desarrollo de dispositivos del tipo juntura túnel con nuevas funcionalidades. La información obtenida de la caracterización de los sistemas bicapas (homogeneidad de crecimiento, baja densidad de defectos y de pinholes) indican un muy buen control de los parámetros de crecimiento de las barreras. Por otro lado, se obtuvo un buen comportamiento aislante para espesores mayores a 2 nm sin la presencia de pinholes en la barrera. La similitud en la estequiometría de las barreras (SrTiO_3) permitió comparar los distintos sistemas estudiados en términos de conductividad eléctrica. Se verificó que el modelo fenomenológico permite comparar la conductividad eléctrica de los sistemas mediante uno de los parámetros definidos en el modelo fenomenológico (obtenido de los ajustes lineales de las curvas I(V)). De los 3 sistemas estudiados, las bicapas GdBa_2Cu_3O_7/SrTiO_3 presentaron un mayor valor de longitud de atenuación de los portadores de carga a través de la barrera y una muy baja densidad de defectos superficiales. Las bicapas YBa_2Cu_3O_7/SrTiO_3 y Nb/Ba_0,05Sr_0,95TiO_3 permitieron validar el modelo fenomenológico propuesto para el análisis de la respuesta corriente - voltaje obtenida con el microscopio de fuerza atómica en modo conductor. La segunda parte de la tesis abarca conceptos de magnetismo y microfabricación para el desarrollo de junturas túnel magnéticas. Durante la caracterización de las películas ferromagnéticas individuales de Co_90Fe_10 (CoFe) se logró aumentar valor del campo coercitivo de films de 10 nm de espesor al incrementar la temperatura de depósito. Esto se debe a un aumento del tamaño de grano de los films. El aumento de la temperatura del sustrato durante el crecimiento influye en la morfología y las propiedades magnéticas de los films de CoFe favoreciendo la formación de granos y la pérdida del eje preferencial de magnetización. Estos resultados permitieron la fabricación de sistemas Co_90Fe_10/M_gO/Co_90Fe_10 con distintas orientaciones relativas accesibles con campo magnético para el estudio del acople magnético entre los films de CoFe. La caracterización eléctrica de estos sistemas, particularmente la respuesta corriente - voltaje obtenida con el microscopio de fuerza atómica en modo conductor, indicó que las propiedades de transporte eléctrico de las junturas presentan un alto grado de reproducibilidad. Se analizó además la inuencia del sustrato utilizado en la corriente túnel que atraviesa la barrera aislante. Por otro lado, se discuten los fenómenos relacionados a la optimización de las propiedades magnéticas de electrodos ferromagnéticos para la fabricación de junturas túnel Co_90Fe_10/MgO/Co_90Fe_10 y Co_90Fe_10/MgO /Fe_20Ni_80. En particular, se estudió el acople magnético entre capas ferromagnéticas y la inuencia del sustrato utilizado para el crecimiento de las tricapas. La optimización de los electrodos magnéticos involucró el análisis de la inuencia de la presencia de un aislante entre dos capas magnéticas en el acople de los electrodos. Se logró el desacople de films de 10 nm de Co_90Fe_10 y Fe_20Ni_80 separados por un espaciador de MgO de 2 nm. Finalmente se detallan los pasos para la fabricación de una red de junturas túnel magnéticas y su caracterización eléctrica a bajas temperaturas. El sistema estudiado fue la tricapa Co_90Fe_10 (10 nm)/M_gO (8 nm)/ Fe_20Ni_80 (10 nm) crecido sobre un sustrato de M_gO. La caracterización eléctrica confirmó la buena calidad de la junturas fabricadas. Las junturas obtenidas presentaron un comportamiento altamente resistivo (~ MΩ). Las mediciones de la corriente túnel en función de la temperatura permitieron descartar la presencia de pinholes en la barrera. El transporte de los portadores de carga es por efecto túnel a través de la barrera aislante. Las curvas de conductancia diferencial permitieron calcular el valor medio de la altura de la barrera de potencial (φ = 3.1 eV) a partir del modelo de Brinkman. Los resultados obtenidos en cada uno de los capítulos se complementan y son relevantes para la optimización de junturas túnel, debido a que brindan información crítica para su correcto funcionamiento. En la presente tesis se lograron obtener los primeros avances para la fabricación de arreglos de junturas túnel que permitan el desarrollo de dispositivos.

Magnetómetro para medida de campos electromagnéticos débiles en la banda ELF

La invención comprende un sistema para la medición de campos electromagnéticos débiles, en la banda de frecuencias comprendida entre 1 a 100 Hz, donde se localizan señales derivadas de la resonancia natural que ocurre entre la tierra y la ionosfera, las resonancias de Schumann. El sistema está compuesto por un núcleo de material ferromagnético (1) y un conjunto de bobinas separadas entre sí (2), conectadas mediante cables unifilares (8). Un cable de par trenzado (3) conecta el sensor a un sistema electrónico de medida (4) compuesto por un amplificador diferencial (5) al que se acoplan cada par trenzado, en una bifurcación coaxial con las mallas comunes (20), (21) mediante conectores coaxiales (22), (23) y con salida a un convertidor analógico digital (6). La geometría, estructura y materiales del sistema, le confieren sus propiedades de sensibilidad y ancho de banda.

Sistema de realidade aumentada no procedimento cirúrgico de remoção de pedras nos rins

A inovação tecnológica e as facilidades que gera tem tido um impacto crescente em diversas área, inclusivamente na medicina. A rápida evolução por parte de algumas tecnologias, como é o caso da Realidade Aumentada (RA), criam excelentes oportunidades, nomeadamente para intervenções cirúrgicas laparoscópicas, que apresentam especialmente problemas ao nível da exposição do doente a radiação. O presente documento detalha todo o processo de investigação e desenvolvimento realizado com a pretensão de criar um sistema de navegação por RA que auxilie o procedimento cirúrgico laparoscópico de remoção de pedras nos rins. Com este objetivo em perspetiva, e numa parceria com a empresa ECmedica LTD, foram desenvolvidos quatro protótipo funcionais. Com o intuito de compreender as melhores práticas de sistemas de input, interface e sistema de registo a aplicar, estes integraram aspetos inovadores tais como a utilização de uma sonda ultra-som, como substituta do raioX, e um registo feito através de sensores magnéticos. Apoiados numa metodologia de design centrado no utilizador e em instrumentos de análise como entrevistas e observação natural, os protótipos foram testados, obtendo respostas esclarecedoras relativamente ao objetivos dos protótipos. Foi observado que a RA é vista pelos médicos como uma solução com potencial, com as soluções apresentadas ao nível de inputs, interface e registo a serem bem recebidas. A projeção bidimensional oferecida pela imagem ultra-som foi encarada como insuficientes, sendo sugerida a sua substituição por um aumento tridimensional capaz de facilitar a correta inserção da agulha.

Random path sampling applied to vector models of magnetism

The recently reported Monte Carlo Random Path Sampling method (RPS) is here improved and its application is expanded to the study of the 2D and 3D Ising and discrete Heisenberg models. The methodology was implemented to allow use in both CPU-based high-performance computing infrastructures (C/MPI) and GPU-based (CUDA) parallel computation, with significant computational performance gains. Convergence is discussed, both in terms of free energy and magnetization dependence on field/temperature. From the calculated magnetization-energy joint density of states, fast calculations of field and temperature dependent thermodynamic properties are performed, including the effects of anisotropy on coercivity, and the magnetocaloric effect. The emergence of first-order magneto-volume transitions in the compressible Ising model is interpreted using the Landau theory of phase transitions. Using metallic Gadolinium as a real-world example, the possibility of using RPS as a tool for computational magnetic materials design is discussed. Experimental magnetic and structural properties of a Gadolinium single crystal are compared to RPS-based calculations using microscopic parameters obtained from Density Functional Theory.

Coupling of magnetic, strain and electric polarization fields in the structure of multiferroic material

The comprehensive study on the coupling of magnetism, electrical polarization and the crystalline lattice with the off-stoichiometric effects in self-doped multiferroic hexagonal h-LuMnxO3±δ (0.92≤x≤1.12) ceramic oxides was carried out for the PhD work. There is a complex coupling of the three ferroic degrees. The cancelation of the magnetic moments of ions in the antiferromagnetic order, electric polarization with specific vortex/antivortex topology and lattice properties have pushed researchers to find out ways to disclose the underlying physics and chemistry of magneto-electric and magneto-elastic couplings of h-RMnO3 multiferroic materials. In this research work, self-doping of Lu-sites or Mn-sites of h-LuMnxO3±δ ceramics prepared via solid state route was done to pave a way for deeper understanding of the antiferromagnetic transition, the weak ferromagnetism often reported in the same crystalline lattices and the ferroelectric properties coupled to the imposed lattice changes. Accordingly to the aim of the PhD thesis, the objectives set for the sintering study in the first chapter on experimental results were two. First, study of sintering off-stoichiometric samples within conditions reported in the bibliography and also extracted from the phase diagrams of the LuMnxO3±δ, with a multiple firings ending with a last high temperature step at 1300ºC for 24 hours. Second, explore longer annealing times of up to 240 hours at the fixed temperature of 1300 ºC in a search for improving the properties of the solid solution under study. All series of LuMnxO3±δ ceramics for each annealing time were characterized to tentatively build a framework enabling comparison of measured properties with results of others available in literature. XRD and Rietveld refinement of data give the evolution the lattice parameters as a function to x. Shrinkage of the lattice parameters with increasing x values was observed, the stability limit of the solid solution being determined by analysis of lattice parameters. The evolution of grain size and presence of secondary phases have been investigated by means of TEM, SEM, EDS and EBSD techniques. The dependencies of grain growth and regression of secondary phases on composition x and time were further characterized. Magnetic susceptibility of samples and magnetic irreversibility were extensively examined in the present work. The dependency of magnetic susceptibility, Neel ordering transition and important magnetic parameters are determined and compared to observation in other multiferroics in the following chapter of the thesis. As a tool of high sensitivity to detect minor traces of the secondary phase hausmannite, magnetic measurements are suggested for cross-checking of phase diagrams. Difficulty of previous studies on interpreting the magnetic anomaly below 43 K in h-RMnO3 oxides was discussed and assigned to the Mn3O4 phase, with supported of the electron microscopy. Magneto-electric coupling where AFM ordering is coupled to dielectric polarization is investigated as a function of x and of sintering condition via frequency and temperature dependent complex dielectric constant measurements in the final chapter of the thesis. Within the limits of solid solubility, the crystalline lattice of off-stoichiometric ceramics was shown to preserve the magneto-electric coupling at TN. It represents the first research work on magneto-electric coupling modified by vacancy doping to author’s knowledge. Studied lattices would reveal distortions at the atomic scale imposed by local changes of x dependent on sintering conditions which were widely inspected by using TEM/STEM methods, complemented with EDS and EELS spectroscopy all together to provide comprehensive information on cross coupling of distortions, inhomogeneity and electronic structure assembled and discussed in a specific chapter. Internal interfaces inside crystalline grains were examined. Qualitative explanations of the measured magnetic and ferroelectric properties were established in relation to observed nanoscale features of h-LuMnxO3±δ ceramics. Ferroelectric domains and topological defects are displayed both in TEM and AFM/PFM images, the later technique being used to look at size, distribution and switching of ferroelectric domains influenced by vacancy doping at the micron scale bridging to complementary TEM studies on the atomic structure of ferroelectric domains. In support to experimental study, DFT simulations using Wien2K code have been carried out in order to interpret the results of EELS spectra of O K-edge and to obtain information on the cation hybridization to oxygen ions. The L3,2 edges of Mn is used to access the oxidation state of the Mn ions inside crystalline grains. In addition, rehybridization driven ferroelectricity is also evaluated by comparing the partial density of states of the orbitals of all ions of the samples, also the polarization was calculated and correlated to the off-stoichiometric effect.

Critical magnetic elds in superconducting systems with semi-metallic bands

In this work, we study the Zeeman splitting effects in the parallel magnetic field versus temperature phase diagram of two-dimensional superconductors with one graphene-like band and the orbital effects of perpendicular magnetic fields in isotropic two-dimensional semi-metallic superconductors. We show that when parallel magnetic fields are applied to graphene and as the intraband interaction decreases to a critical value, the width of the metastability region present in the phase diagram decreases, vanishing completely at that critical value. In the case of two-band superconductors with one graphene-like band, a new critical interaction, associated primarily with the graphene-like band, is required in order for a second metastability region to be present in the phase diagram. For intermediate values of this interaction, a low-temperature first-order transition line bifurcates at an intermediate temperature into a first-order transition between superconducting phases and a second-order transition line between the normal and the superconducting states. In our study on the upper critical fields in generic semi-metallic superconductors, we find that the pair propagator decays faster than that of a superconductor with a metallic band. As result, the zero field band gap equation does not have solution for weak intraband interactions, meaning that there is a critical intraband interaction value in order for a superconducting phase to be present in semi-metallic superconductors. Finally, we show that the out-of-plane critical magnetic field versus temperature phase diagram displays a positive curvature, contrasting with the parabolic-like behaviour typical of metallic superconductors.

Desenvolvimento de magnetizador para tratamento magnético da água

Dissertação (mestrado)—Universidade de Brasília, Faculdade Gama, Programa de Pós-Graduação em Engenharia Biomédica, 2015.