Characterization of defect removal in hydrogenated and deuterated amorphous silicon thin film transistors

Thin film transistors (TFTs) utilizing an hydrogenated amorphous silicon (a-Si:H) channel layer exhibit a shift in the threshold voltage with time under the application of a gate bias voltage due to the creation of metastable defects. These defects are removed by annealing the device with zero gate bias applied. The defect removal process can be characterized by a thermalization energy which is, in turn, dependent upon an attempt-to-escape frequency for defect removal. The threshold voltage of both hydrogenated and deuterated amorphous silicon (a-Si:D) TFTs has been measured as a function of annealing time and temperature. Using a molecular dynamics simulation of hydrogen and deuterium in a silicon network in the H2 * configuration, it is shown that the experimental results are consistent with an attempt-to-escape frequency of (4.4 ± 0.3) × 1013 Hz and (5.7 ± 0.3) × 1013 Hz for a-Si:H and a-Si:D respectively which is attributed to the oscillation of the Si-H and Si-D bonds. Using this approach, it becomes possible to describe defect removal in hydrogenated and deuterated material by the thermalization energies of (1.552 ± 0.003) eV and (1.559 ± 0.003) eV respectively. This correlates with the energy per atom of the Si-H and Si-D bonds. © 2006 Elsevier B.V. All rights reserved.

Paper re-use: Toner-print removal by laser ablation

This article explores the possibility of using a laser to remove toner-print from office paper. Removal of print would allow paper to be re-used instead of being recycled or disposed into a landfill. This might reduce climate change gas emissions per tonne of office paper by between 45% and 95%. Although there is little previous research on the area, a number of related articles on paper conservation methods using laser radiation can be found in literature. Different authors have studied the effects of laser energy on blank paper and its application for cleaning soiled paper. However, this study examines toner-print removal from paper by laser ablation. In this article a laser in the visible range is applied to a single toner-paper combination with a range of energy fluences. Results are evaluated by means of colour measurements under the L*a*b* colour space and SEM images. Analysis of the samples reveals that there are parameters under which it is possible to remove toner from paper without causing significant discolouration or damage to the substrate. This means that it is technically possible to remove toner-print for paper re-use.

Influence of formulated diets with varying protein levels on growth and ammonia excretion in the fry of Indian major carp, Cirrhina mrigala

The influence of formulated isocaloric diets of different protein levels (30, 35, 40, 45 and 50%) on the growth and ammonia excretion of the Indian major carp Cirrhina mrigala fry was studied for a rearing period of four weeks in the laboratory. Fishmeal, groundnut oilcake and silkworm pupae formed the source of protein in all the diets. As the dietary protein level increased from 30 to 40%, the growth and conversion efficiency increased significantly. Further increase in the protein level resulted in decrease in growth and conversion efficiency. Growth rate, weight gain (%), and gross and net feed conversion efficiencies were maximum at 40% dietary protein level. Ammonia excretion was directly proportional to the level of protein in the diet.

Removal of fungus and prevention of fungal reinfestation in stored dry salted fish

A simple and effective method is described for converting dry fish products infested with fungus and red halophilic bacteria to acceptable ones. Washing, drying and then smearing with a mixture of 3% sodium propionate in dry, refined salt in a ratio of 1 part mixture: 10 parts dry fish resulted in the fish having a shelf life of 5 months.

Chitosan for removal of mercury from water

Chitosan from prawn waste was used for the removal of mercury from solutions. Mercuric chloride solutions containing 250, 500, 1000, 10000 and 100000 ng of Hg super(+2)/ml were treated with chitosan samples of different particle size for different periods. The effect of initial concentration of mercury in the solution, particle size of chitosan and time of treatment on the adsorption of Hg super(+2) was studied. The residual mercury content after treatment for ten min. with chitosan of 40 mesh size from a solution of initial concentration 10000 ng/ml was 10 ng/ml whereas it was 50 ng/ml for chitosan of larger particle size (10-20 mesh). From solutions of lower concentrations complete removal of mercury was possible by chitosan treatment. Though the particle size and time of treatment have significant effect, the concentration of mercury in solution is more influential on the removal of mercury from solution.

Effect of nitrite, ammonia, and temperature on P. monodon larvae

P. monodon larvae were studied for the effects of temperature, ammonia, and nitrite on survival. Toxicity levels of nitrite were found to vary with larval stage. Larvae could tolerate ammonia up to about 10 ppm, with the effect more clearly shown by the zoea stage. Survival and growth were not significantly affected by temperature, although moulting was enhanced at temperatures higher than 29 C. Larvae of P. monodon have lower tolerance toward nitrite and ammonia compared to postlarvae. Although high survival was obtained at low levels of nitrite and ammonia, it is still necessary to know their effects on metabolism, in order to examine possible biochemical parameters for diagnosing sublethal toxicity or stress.

Gill lesions associated with acute exposure to ammonia

Histopathological effects of ammonia on the gills of milkfish (Chanos chanos ) fingerlings were examined qualitatively.

Acute toxicity of un-ionized ammonia to milkfish (Chanos chanos) fingerlings

The acute toxicity of un-ionized ammonia to milkfish (Chanos chanos) fingerlings was determined using a static bioassay system. Median lethal concentrations found show that milkfish fingerlings have a high tolerance to ammonia and it is unlikely that levels as high as those employed for the acute exposure would be found to occur under natural conditions. Although the threat of acute toxicological effects induced by ammonia are remote, such conditions might be encountered in stressed natural environments or in heavily loaded aquaculture systems.

Acute toxicity of unionized ammonia to milkfish (Chanos chanos Forsskal) fry

The study was conducted to determine the effects of varying concentrations of ammonia to milkfish fry. Two runs of static 96h bioassays were conducted to determine the median lethal concentration (LC 50) of unionized ammonia (NH₃) to milkfish fry. Test concentrations were based on exploratory 24h and 48h bioassays and were made in three replicates. Reagent grade ammonium chloride (NH₄Cl) was used to adjust the level of unionized ammonia. The 96h median lethal concentration, determined by the Reed Muench method was calculated at 28.029 ppm NH₃ 29.69 ppm. Even at high concentrations of unionized ammonia, most of the fry mortality occurred after 48 to 96 hours exposure. Severe gill damage occurs only at concentrations above 20 ppm, especially above the LC 50. The high LC 50 value obtain shows that milkfish fry has great tolerance to ammonia, that even fry with severely-damaged gills can still recover days after it is returned to favorable culture condition. The result suggest that observed mortalities of milkfish fry under culture conditions are not due to ammonia toxicity.