Influência da corrosão no comportamento ao arrancamento de fibras de aço no betão auto-compactável

Quando adicionadas ao betão, a possibilidade de corrosão das fibras de aço , devido à penetração de cloretos e ação da carbonatação, é um parâmetro de durabilidade no betão auto-compactável reforçado com fibras de aço (BACRFA) que requer especial atenção. No BACRFA fendilhado, a corrosão tende a ocorrer nas fibras de aço que atravessam as fissuras, o que pode afetar o seu comportamento à flexão. Deste modo, o estudo do comportamento interfacial fibra/matriz é importante para a compreensão dos efeitos da corrosão das fibras de aço no comportamento mecânico e na durabilidade das estruturas de BACRFA. Com o intuito de avaliar estes efeitos, no presente trabalho desenvolveu-se um ensaio experimental de arrancamento de fibras de aço em BAC fendilhado, sujeitas previamente à ação da corrosão por exposição a um ambiente agressivo de cloretos, sendo a corrosão avaliada por intermédio de técnicas eletroquímicas. Os ensaios eletroquímicos realizados revelaram que a probabilidade de corrosão das fibras de aço num ambiente com cloretos é superior a 90%. No mesmo ambiente, a susceptibilidade para a corros ão das fibras de aço que atravessam uma pseudo-fissura, aumenta com a abertura de fissura provocando um aumento da resistência ao arranque da fibra em BAC fissurado

Macro-nutrientes no lençol freático em Floresta Intacta, Floresta de Manejo e Pastagem no norte de Mato Grosso

A remoção de uma cobertura florestal e sua substituição por outras formas de uso do solo tem sido uma constante no norte do estado de Mato Grosso podendo alterar os ciclos hidrológicos e biogeoquímicos dos ecossistemas. Neste contexto, o presente trabalho visou identificar a variação do fósforo e nitrogênio das águas do lençol freático em áreas de Floresta de Transição madura e intacta (Floresta Intacta), Floresta de Transição Manejada (Floresta Manejada) e Pastagem localizadas no norte de Mato Grosso. Foram realizadas mensalmente medidas do nível do lençol freático, de coletas de amostras de água para análises físico-químicas e medições de precipitação e temperatura do ar, no período de janeiro/2005 a novembro/2006. Verificou-se uma sazonalidade na precipitação e na temperatura do ar. No período de estiagem as águas do lençol freático apresentaram maiores teores de nitrogênio e de fósforo total nas três áreas em estudo. Os maiores valores de nitrogênio e fósforo foram detectados nos ecossistemas florestais (Florestas Intacta e Manejada) como indicativo da função da cobertura vegetal na ciclagem dos nutrientes.

Efluxo de CO2 do solo em floresta de transição Amazônia Cerrado e em área de pastagem

O objetivo deste trabalho foi (a) estimar o efluxo de CO2 do solo em uma Floresta de Transição Amazônica Cerrado e em uma área de Pastagem localizadas no norte do Mato Grosso, e (b) verificar a influência da umidade e temperatura do solo, e serrapilheira acumulada no efluxo de CO2. As medições foram realizadas com aparelho de absorção de CO2 por infravermelho (EGM/WMA-2 PP System, Hitchin Hertz, UK) de maio/2005 a abril/2006. Os valores médios do efluxo de CO2 do solo na Floresta e na área de Pastagem foram de 5,45 e 4,95 µmolm-2s-1, respectivamente. Uma resposta satisfatória do efluxo de CO2 do solo e a serrapilheira acumulada, ocorreu somente na estação seca. Na estação seca o comportamento do efluxo de CO2 do solo foi semelhante na Floresta de Transição Amazônica Cerrado e na área de Pastagem, e na estação úmida os ecossistemas apresentaram comportamentos distintos, e o efluxo de CO2 do solo na área de Pastagem foi superior ao na Floresta de Transição. É essencial que se avalie a influência de outros fatores no efluxo de CO2 em ecossistemas localizados em um mesmo ecótono para a obtenção de novas respostas que contribuíam para esclarecer as dúvidas da emissão de CO2 em nível mundial.

Lugar Próximo

Texto para catálogo de exposição com desenhos de Joaquim Pinto Vieira, Daniel Silvestre Silva, Manuel Mendes, Nuno Sousa, Miguel Bandeira Duarte, José Miguel Cardoso, Paulo Freire de Almeida. A exposição decorreu na Escola de Arquitectura da Universidade do Minho em junho de 2015 e no Palacete da Praça de S. Tiago / Extensão do Museu Alberto Sampaio em outubro de 2015.

Thin films composed of gold nanoparticles dispersed in a dielectric matrix: the influence of the host matrix on the optical and mechanical responses

Gold nanoparticles were dispersed in two different dielectric matrices, TiO2 and Al2O3, using magnetron sputtering and a post-deposition annealing treatment. The main goal of the present work was to study how the two different host dielectric matrices, and the resulting microstructure evolution (including both the nanoparticles and the host matrix itself) promoted by thermal annealing, influenced the physical properties of the films. In particular, the structure and morphology of the nanocomposites were correlated with the optical response of the thin films, namely their localized surface plasmon resonance (LSPR) characteristics. Furthermore, and in order to scan the future application of the two thin film system in different types of sensors (namely biological ones), their functional behaviour (hardness and Young's modulus change) was also evaluated. Despite the similar Au concentrations in both matrices (~ 11 at.%), very different microstructural features were observed, which were found to depend strongly on the annealing temperature. The main structural differences included: (i) the early crystallization of the TiO2 host matrix, while the Al2O3 one remained amorphous up to 800 °C; (ii) different grain size evolution behaviours with the annealing temperature, namely an almost linear increase for the Au:TiO2 system (from 3 to 11 nm), and the approximately constant values observed in the Au:Al2O3 system (4–5 nm). The results from the nanoparticle size distributions were also found to be quite sensitive to the surrounding matrix, suggesting different mechanisms for the nanoparticle growth (particle migration and coalescence dominating in TiO2 and Ostwald ripening in Al2O3). These different clustering behaviours induced different transmittance-LSPR responses and a good mechanical stability, which opens the possibility for future use of these nanocomposite thin film systems in some envisaged applications (e.g. LSPR-biosensors).

Influência da certificação florestal no cumprimento da legislação ambiental e trabalhista na região amazônica

Nas últimas décadas tem surgido uma maior preocupação ambiental advinda das mudanças climáticas e dos desmatamentos contínuos das florestas tropicais. Para conciliar a exploração e a conservação das florestas surgiram alguns mecanismos, entre eles a certificação florestal. No Brasil, ela está presente há mais de uma década, através do FSC (Forest Stewardship Council), uma ONG (Organização Não-Governamental) que estabeleceu um padrão para a certificação do manejo florestal. Este padrão possui nove princípios e o primeiro deles trata da "Obediência às Leis e Princípios do FSC", exigindo o cumprimento e respeito de todas as leis aplicáveis ao país onde opera e obedecer a todos os seus Princípios e Critérios. Neste contexto, este trabalho teve por objetivo verificar a influência da certificação florestal no cumprimento da legislação nas unidades de manejo de florestas nativas. Buscaram-se os dados nos relatórios públicos das unidades de manejo certificadas até 2007. A avaliação foi realizada por meio da identificação e análise das principais não-conformidades, com relação ao primeiro princípio. Verificou-se que os principais problemas estavam relacionados à legislação ambiental e trabalhista. As não-conformidades da legislação trabalhista foram em sua maioria referentes aos problemas com trabalhadores terceirizados e a legislação ambiental referentes às áreas de preservação permanente e falta de autorizações de órgãos ambientais. Caso sejam tomadas ações para resolvê-las, pode-se concluir que a certificação florestal pode contribuir para o atendimento da legislação nas unidades de manejo de florestas nativas.

Optical properties of zirconium oxynitride films: the effect of composition, electronic and crystalline structures

tThis work is devoted to the investigation of zirconium oxynitride (ZrOxNy) films with varied opticalresponses prompted by the variations in their compositional and structural properties. The films wereprepared by dc reactive magnetron sputtering of Zr, using Ar and a reactive gas mixture of N2+ O2(17:3).The colour of the films changed from metallic-like, very bright yellow-pale and golden yellow, for low gasflows to red-brownish for intermediate gas flows. Associated to this colour change there was a significantdecrease of brightness. With further increase of the reactive gas flow, the colour of the samples changedfrom red-brownish to dark blue or even to interference colourations. The variations in composition dis-closed the existence of four different zones, which were found to be closely related with the variationsin the crystalline structure. XRD analysis revealed the change from a B1 NaCl face-centred cubic zirco-nium nitride-type phase for films prepared with low reactive gas flows, towards a poorly crystallizedover-stoichiometric nitride phase, which may be similar to that of Zr3N4with some probable oxygeninclusions within nitrogen positions, for films prepared with intermediate reactive gas flows. For highreactive gas flows, the films developed an oxynitride-type phase, similar to that of -Zr2ON2with someoxygen atoms occupying some of the nitrogen positions, evolving to a ZrO2monoclinic type structurewithin the zone where films were prepared with relatively high reactive gas flows. The analysis carriedout by reflected electron energy loss spectroscopy (REELS) revealed a continuous depopulation of thed-band and an opening of an energy gap between the valence band (2p) and the Fermi level close to 5 eV.The ZrN-based coatings (zone I and II) presented intrinsic colourations, with a decrease in brightness anda colour change from bright yellow to golden yellow, red brownish and dark blue. Associated to thesechanges, there was also a shift of the reflectivity minimum to lower energies, with the increase of thenon-metallic content. The samples lying in the two last zones (zone III, oxynitride and zone IV, oxide films)revealed a typical semi-transparent-optical behaviour showing interference-like colourations only dueto the complete depopulation of the d band at the Fermi level. The samples lying in these zones presentedalso an increase of the optical bandgap from 2 to 3.6 eV.

Biological behaviour of thin films consisting of Au nanoparticles dispersed in a TiO2 dielectric matrix

In this work it was studied the possible use of thin films, composed of Au nanoparticles (NPs) embedded in a TiO2 matrix, in biological applications, by evaluating their interaction with a well-known protein, Bovine Serum Albumin (BSA), as well as with microbial cells (Candida albicans). The films were produced by one-step reactive DC magnetron sputtering followed by heat-treatment. The samples revealed a composition of 8.3 at.% of Au and a stoichiometric TiO2 matrix. The annealing promoted grain size increase of the Au NPs from 3 nm (at 300 °C) to 7 nm (at 500 °C) and a progressive crystallization of the TiO2 matrix to anatase. A broad localized surface plasmon resonance (LSPR) absorption band (λ = 580–720 nm) was clearly observed in the sample annealed at 500 °C, being less intense at 300 °C. The biological tests indicated that the BSA adhesion is dependent on surface nanostructure morphology, which in turn depends on the annealing temperature that changed the roughness and wettability of the films. The Au:TiO2 thin films also induced a significant change of the microbial cell membrane integrity, and ultimately the cell viability, which in turn affected the adhesion on its surface. The microstructural changes (structure, grain size and surface morphology) of the Au:TiO2 films promoted by heat-treatment shaped the amount of BSA adhered and affected cell viability.

Thin films composed of Ag nanoclusters dispersed in TiO2: Influence of composition and thermal annealing on the microstructure and physical responses

Noble metal powders containing gold and silver have been used for many centuries, providing different colours in the windows of the medieval cathedrals and in ancient Roman glasses. Nowadays, the interest in nanocomposite materials containing noble nanoparticles embedded in dielectric matrices is related with their potential use for a wide range of advanced technological applications. They have been proposed for environmental and biological sensing, tailoring colour of functional coatings, or for surface enhanced Raman spectroscopy. Most of these applications rely on the so-called localised surface plasmon resonance absorption, which is governed by the type of the noble metal nanoparticles, their distribution, size and shape and as well as of the dielectric characteristics of the host matrix. The aim of this work is to study the influence of the composition and thermal annealing on the morphological and structural changes of thin films composed of Ag metal clusters embedded in a dielectric TiO2 matrix. Since changes in size, shape and distribution of the clusters are fundamental parameters for tailoring the properties of plasmonic materials, a set of films with different Ag concentrations was prepared. The optical properties and the thermal behaviour of the films were correlated with the structural and morphological changes promoted by annealing. The films were deposited by DC magnetron sputtering and in order to promote the clustering of the Ag nanoparticles the as-deposited samples were subjected to an in-air annealing protocol. It was demonstrated that the clustering of metallic Ag affects the optical response spectrum and the thermal behaviour of the films.

The influence of nitrogen and oxygen additions on the thermal characteristics of aluminium-based thin films

The ternary aluminium oxynitride (AlNxOy) system offers the possibility to obtain a wide range of properties by tailoring the ratio between pure Al, AlNx and AlOy and therefore opening a significant number of possible applications. In this work the thermal behaviour of AlNxOy thin films was analysed by modulated infrared radiometry (MIRR), taking as reference the binary AlOy and AlNx systems. MIRR is a non-contact and non-destructive thermal wave measurement technique based on the excitation, propagation and detection of temperature oscillations of very small amplitudes. The intended change of the partial pressure of the reactive gas (N2 and/or O2) influenced the target condition and hence the deposition characteristics which, altogether, affected the composition and microstructure of the films. Based on the MIRR measurements and their qualitative and quantitative interpretation, some correlations between the thermal transport properties of the films and their chemical/physical properties have been found. Furthermore, the potential of such technique applied in this oxynitride system, which present a wide range of different physical responses, is also discussed. The experimental results obtained are consistent with those reported in previous works and show a high potential to fulfil the demands needed for the possible applications of the systems studied. They are clearly indicative of an adequate thermal response if this particular thin film system is aimed to be applied in small sensor devices or in electrodes for biosignal acquisition, such as those for electroencephalography or electromyography as it is the case of the main research area that is being developed in the group.

Microstructural evolution of Au/TiO2 nanocomposite films: The influence of Au concentration and thermal annealing

Nanocomposite thin films consisting of a dielectric matrix, such as titanium oxide (TiO2), with embedded gold (Au) nanoparticles were prepared and will be analysed and discussed in detail in the present work. The evolution of morphological and structural features was studied for a wide range of Au concentrations and for annealing treatments in air, for temperatures ranging from 200 to 800 °C. Major findings revealed that for low Au atomic concentrations (at.%), there are only traces of clustering, and just for relatively high annealing temperatures, T ≥ 500 °C. Furthermore, the number of Au nanoparticles is extremely low, even for the highest annealing temperature, T = 800 °C. It is noteworthy that the TiO2 matrix also crystallizes in the anatase phase for annealing temperatures above 300 °C. For intermediate Au contents (5 at.% ≤ CAu ≤ 15 at.%), the formation of gold nanoclusters was much more evident, beginning at lower annealing temperatures (T ≥ 200 °C) with sizes ranging from 2 to 25 nm as the temperature increased. A change in the matrix crystallization from anatase to rutile was also observed in this intermediate range of compositions. For the highest Au concentrations (> 20 at.%), the films tended to form relatively larger clusters, with sizes above 20 nm (for T ≥ 400 °C). It is demonstrated that the structural and morphological characteristics of the films are strongly affected by the annealing temperature, as well as by the particular amounts, size and distribution of the Au nanoparticles dispersed in the TiO2 matrix.

Evolution of the functional properties of titanium–silver thin films for biomedical applications: Influence of in-vacuum annealing

In this work, the thermal stability of TiAgx thin films, deposited by magnetron sputtering, was evaluated, envisaging their application in biomedical devices, namely as electrodes for biosignal acquisition. Based on the composition and microstructural characterization, a set of four representative TiAgx thin films was selected in order to infer whether they are thermally stable in terms of functional properties. In order to achieve this purpose, the structural and morphological evolution of the films with annealing temperature was correlated with their electrical, mechanical and thermal properties. Two distinct zones were identified and two samples from each zone were extensively analysed. In the first zone (zone I), Ti was the main component (Ti-rich zone) while in the second, zone II, the Ag content was more significant. The selected samples were annealed in vacuum at four different temperatures up to 500 oC. For the samples produced within zone I, small microstructural changes were observed due to the recrystallization of the Ti structure and grain size increment. Also, no significant changes were observed with annealing temperature regarding the f l ’ functional properties, being thermally stable up to 500 oC. For higher Ag contents (zone II) the energy supplied by thermal treatments was sufficient to activate the crystallization of Ti-Ag intermetallic phases. A strong increase of the grain size of these phases was also reported. The structural and morphological organization proved to be determinant for the physical responses of the TiAgx system. The hardness and Y g’s modulus were significantly improved with the formation of the intermetallic phases. The silver addition and annealing treatments also played an important role in the electrical conductivity of the films, which was once again improved by the formation of Ti-Ag phases. The thermal diffusivity of the films was practically unchanged with the heat-treatment. This set of results shows that this intermetallic-like thin film system has good thermal stability up to high temperatures (as high as 500 oC), which in case of the highest Ag content zone is particularly evident for electrical and mechanical properties, showing an important improvement. Hardness increases about three times, while resistivity values become half of those from the lowest Ag contents zone. These set of characteristics are consistent with the targeted applications, namely in terms of biomedical sensing devices.

Efeito da adição de Zr no endurecimento de ligas Al-Sc

Dissertação de mestrado integrado em Engenharia de Materiais

O ensino da flauta de bisel em grupo como inovação pedagógica: Uma investigação-ação no 2.º Ciclo do Ensino Básico

Tese de Doutoramento em Estudos da Criança (Especialidade em Educação Musical)

O ensino de piano em grupo para uma nova literacia musical. Impactos de um projeto de investigação-ação numa escola pública

Tese de Doutoramento em Estudos da Criança (Especialidade em Educação Musical)