Environmentally friendly reduction of a platinum catalyst precursor supported on polypyrrole

Supported metals are traditionally prepared by impregnating a support material with the metal precursor solution, followed by reduction in hydrogen at elevated temperatures. In this study, a polymeric support has been considered. Polypyrrole (PPy) has been chemically synthesized using FeCl3 as a doping agent, and it has been impregnated with a H2PtCl6 solution to prepare a catalyst precursor. The restricted thermal stability of polypyrrole does not allow using the traditional reduction in hydrogen at elevated temperature, and chemical reduction under mild conditions using sodium borohydride implies environmental concerns. Therefore, cold RF plasma has been considered an environmentally friendly alternative. Ar plasma leads to a more effective reduction of platinum ions in the chloroplatinic complex anchored onto the polypyrrole chain after impregnation than reduction with sodium borohydride, as has been evidenced by XPS. The increase of RF power enhanced the effectiveness of the Ar plasma treatment. A homogeneous distribution of platinum nanoparticles has been observed by TEM after the reduction treatment with plasma. The Pt/polypyrrol catalyst reduced by Ar plasma at 200 watts effectively catalyzed the aqueous reduction of nitrates with H2 to yield N2, with a very low selectivity to undesired nitrites and ammonium by-products.

Reduction of emerging micropollutants, organic matter, nutrients and salinity from real wastewater by combined MBR–NF/RO treatment

To study the possibility of producing better water quality from municipal wastewater, a membrane bioreactor (MBR) pilot plant with flat sheet (FS) and hollow fiber (HF) membranes coupled with another pilot plant equipped with nanofiltration (NF)/reverse osmosis (RO) membranes were operated to treat municipal wastewater from the wastewater treatment plant (WWTP) Rincón de León, Alicante (Spain). This study was focused on improving the quality of the permeate obtained from the MBR process when complemented by NF or RO stages with respect to salinity, organic matter and nutrients. Furthermore, the removal efficiencies of 10 EMPs were evaluated, comparing the reductions achieved between the wastewater treatment by MBR (adsorption to sludge and biodegradation) and the later treatment using NF or RO (mainly size exclusion). The results showed that the high quality of water was obtained which is appropriate for reuse with salinity removal efficiencies higher than 97%, 96% for total organic carbon (TOC), 91% for nitrates View the MathML sourceNO3- and 99% for total phosphorous (TP). High removal efficiencies were obtained for the majority of the analyzed EMP compounds.

NOx storage and reduction over copper-based catalysts. Part 2: Ce0.8M0.2Oδ supports (M = Zr, La, Ce, Pr or Nd)

5% copper catalysts with Ce0.8M0.2Oδ supports (M = Zr, La, Ce, Pr or Nd) have been studied by rapid-scan operando DRIFTS for NOx Storage and Reduction (NSR) with high frequency (30 s) CO, H2 and 50%CO + 50%H2 micropulses. In the absence of reductant pulses, below 200–250 °C NOx was stored on the catalysts as nitrite and nitro groups, and above this temperature nitrates were the main species identified. The thermal stability of the NOx species stored on the catalysts depended on the acid/basic character of the dopant (M more acidic = NOx stored less stable ⇒ Zr4+ < none < Nd3+ < Pr3+ < La3+ ⇐ M more basic = NOx stored more stable). Catalysts regeneration was more efficient with H2 than with CO, and the CO + H2 mixture presented an intermediate behavior, but with smaller differences among the series of catalyst than observed using CO alone. N2 is the main NOx reduction product upon H2 regeneration. The highest NOx removal in NSR experiments performed at 400 °C with CO + H2 pulses was achieved with the catalyst with the most basic dopant (CuO/Ce0.8La0.2Oδ) while the poorest performing catalyst was that with the most acidic dopant (CuO/Ce0.8Zr0.2Oδ). The poor performance of CuO/Ce0.8Zr0.2Oδ in NSR experiments with CO pulses was attributed to its lower oxidation capacity compared to the other catalysts.

Table 1: Main characteristics of the BIOTA observatories included in this study & Table 3: Occurrence of termite taxa at the observatories

Termites are the most important soil ecosystem engineers of semi-arid and arid habitats. They enhance decomposition processes as well as the subsequent mineralisation of nutrients by bacteria and fungi. Through their construction of galleries, nests and mounds, they promote soil turnover and influence the distribution of nutrients and also alter texture and hydrological properties of soils, thereby affecting the heterogeneity of their ecosystem. The main aim of the present thesis was to define the impact of termites on ecosys-tem functioning in a semi-arid ecosystem. In a baseline study, I assessed the diversity of termite taxa in relation to the amount of precipitation, the vegetation patterns and the land use systems at several sites in Namibia. Subsequently, I focussed on a species that is highly abundant in many African savannas, the fungus growing and mound building species Macro-termes michaelseni (Sjöstedt, 1914). I asked how this species influences the spatial hetero-geneity of soil and vegetation patterns. From repeated samplings at 13 sites in Namibia, I obtained 17 termite taxa of 15 genera. While the type of land use seems to have a minor effect on the termite fauna, the mean annual precipitation explained 96% and the Simpson index of vascular plant diversity 81% of the variation in taxa diversity. The number of termite taxa increased with both of these explanation variables. In contrast to former studies on Macrotermes mounds in several regions of Africa that I reviewed, soil analyses from M. michaelseni mounds in the central Namibian savanna revealed that they contain much higher nitrogen contents when compared to their parent material. Further analyses revealed that nitrate forms a major component of the nitrogen content in termite mounds. As nitrate solves easily in water, evaporation processes are most probably responsible for the transport of solved nitrates to the mound surface and their accumulation there. The analysed mounds in central Namibia contained higher sand propor-tions compared to the mounds of the former studies. Through the higher percentage of coarse and middle sized pores, water moves more easily in sandy soils compared to more clayey soils. In consequence, evaporation-driven nitrate accumulation can occur in the studied mounds at high rates. ff...

Identifying sources of subsurface nitrate pollution with stable nitrogen isotopes /

"Contract no. 68-03-2450."

Plutonium nitrate shipping packages /

"RFP-437 ; UC-2 General, Miscellaneous, and Progress Reports ; TID-4500 (34th Ed.)."

Muscle Shoals. Hearings, Sixty-eighth Congress, first session, on S. 139, S. 2372, S. 2747, S. 3214, and H.R. 518, bills relative to the completion of Muscle Shoals.

George W. Norris, chairman.

On the behavior of nitrate in paddy soils.

Reprint from Japan. Agric. exper. station, Tokyo. Bulletin. v. 1, no. 2, Oct. 1907

Nitrate and water supply: source and control; proceedings.

Mode of access: Internet.

Nitrate-nitrogen concentrations in ground water from three selected areas in Kansas /

Mode of access: Internet.

Nitrate and nitrite variation in ground water /

Cover title.

Dynamic modeling and monitoring of water, sediment, nutrients, and pesticides in agricultural watersheds during storm events /

"Contract report 655"--Cover.

Watershed monitoring for the Lake Decatur watershed, 2003-2006 /

"June 2008."

An Australian comparison of specialist care of acute myocardial infarction

Objective. To determine whether patients hospitalized with acute myocardial infarction (AMI) in an Australian setting receive better pharmacological care if managed by cardiologists than by non-cardiologists. Design. Retrospective chart review of patients hospitalized between 1 January 1997 and 30 June 1998, undertaken by abstractors blind to study objectives. Setting. One tertiary and two community hospitals in south-east Queensland, Australia, in which all patients admitted with AMI were cared for by cardiologists and general physicians, respectively. Study participants. Two cohorts of consecutive patients satisfying diagnostic criteria for AMI: 184 in the tertiary hospital and 207 in the community hospitals. Main outcome measures. Frequency of use, in highly eligible patients, of thrombolysis, P-blockers, aspirin, angiotensin-converting enzyme (ACE) inhibitors, lipid-lowering agents, nitrates, and calcium antagonists. Cohorts were compared for differences in prognostic factors or illness severity. Results. In community hospital patients, there was greater use of thrombolysis [100% versus 83% in the tertiary hospital; difference 17%, 95% confidence interval (CI) 11-26%; P < 0.001] and of ACE inhibitors (84% versus 66%; difference 18%, 95% CI 3-34%; P = 0.02), and lower median length of stay (6.0 days versus 7.0 days; P = 0.001) compared with tertiary hospital patients. Frequency of use of other drugs, and adjusted rates of death and re-infarction were the same for both cohorts. Conclusions. With respect to pharmacological management of patients hospitalized with AMI, cardiologists and general physicians appear to provide care of similar quality and achieve equivalent outcomes. Further studies are required to confirm the generalizability of these results to Australian practice as a whole.

Synthesis, characterization, and electrical conduction of 10 mol% Dy2O3 doped CeO2 ceramics

Well-densified 10 mol% Dy2O3-doped CeO2 (20DDC) ceramics with average grain sizes of similar to 0.12-1.5 mu m were fabricated by pressureless sintering at 950-1550 degrees C using a reactive powder thermally decomposed from a carbonate precursor, which was synthesized via a carbonate coprecipitation method employing nitrates as the starting salts and ammonium carbonate as the precipitant. Electrical conductivity of the ceramics, measured by the dc three-point impedance method, shows a V-shape curve against the average grain size. The sample with the smallest grain size of 0.12 mu m exhibits a high conductivity of similar to 10(-1.74) S/cm at the measurement temperature of 700 degrees C, which is about the same conduction level of the micro-grained 10 mol% Sm2O3- or Gd2O3-doped CeO2, two leading electrolyte materials. (c) 2004 Elsevier Ltd. All rights reserved.