Développement d'une nouvelle méthode de caractérisation tissulaire basée sur l'élastographie ultrasonore : application pour le dépistage précoce du cancer du sein

Le cancer du sein est le cancer le plus fréquent chez la femme. Il demeure la cause de mortalité la plus importante chez les femmes âgées entre 35 et 55 ans. Au Canada, plus de 20 000 nouveaux cas sont diagnostiqués chaque année. Les études scientifiques démontrent que l'espérance de vie est étroitement liée à la précocité du diagnostic. Les moyens de diagnostic actuels comme la mammographie, l'échographie et la biopsie comportent certaines limitations. Par exemple, la mammographie permet de diagnostiquer la présence d’une masse suspecte dans le sein, mais ne peut en déterminer la nature (bénigne ou maligne). Les techniques d’imagerie complémentaires comme l'échographie ou l'imagerie par résonance magnétique (IRM) sont alors utilisées en complément, mais elles sont limitées quant à la sensibilité et la spécificité de leur diagnostic, principalement chez les jeunes femmes (< 50 ans) ou celles ayant un parenchyme dense. Par conséquent, nombreuses sont celles qui doivent subir une biopsie alors que leur lésions sont bénignes. Quelques voies de recherche sont privilégiées depuis peu pour réduire l`incertitude du diagnostic par imagerie ultrasonore. Dans ce contexte, l’élastographie dynamique est prometteuse. Cette technique est inspirée du geste médical de palpation et est basée sur la détermination de la rigidité des tissus, sachant que les lésions en général sont plus rigides que le tissu sain environnant. Le principe de cette technique est de générer des ondes de cisaillement et d'en étudier la propagation de ces ondes afin de remonter aux propriétés mécaniques du milieu via un problème inverse préétabli. Cette thèse vise le développement d'une nouvelle méthode d'élastographie dynamique pour le dépistage précoce des lésions mammaires. L'un des principaux problèmes des techniques d'élastographie dynamiques en utilisant la force de radiation est la forte atténuation des ondes de cisaillement. Après quelques longueurs d'onde de propagation, les amplitudes de déplacement diminuent considérablement et leur suivi devient difficile voir impossible. Ce problème affecte grandement la caractérisation des tissus biologiques. En outre, ces techniques ne donnent que l'information sur l'élasticité tandis que des études récentes montrent que certaines lésions bénignes ont les mêmes élasticités que des lésions malignes ce qui affecte la spécificité de ces techniques et motive la quantification de d'autres paramètres mécaniques (e.g.la viscosité). Le premier objectif de cette thèse consiste à optimiser la pression de radiation acoustique afin de rehausser l'amplitude des déplacements générés. Pour ce faire, un modèle analytique de prédiction de la fréquence de génération de la force de radiation a été développé. Une fois validé in vitro, ce modèle a servi pour la prédiction des fréquences optimales pour la génération de la force de radiation dans d'autres expérimentations in vitro et ex vivo sur des échantillons de tissu mammaire obtenus après mastectomie totale. Dans la continuité de ces travaux, un prototype de sonde ultrasonore conçu pour la génération d'un type spécifique d'ondes de cisaillement appelé ''onde de torsion'' a été développé. Le but est d'utiliser la force de radiation optimisée afin de générer des ondes de cisaillement adaptatives, et de monter leur utilité dans l'amélioration de l'amplitude des déplacements. Contrairement aux techniques élastographiques classiques, ce prototype permet la génération des ondes de cisaillement selon des parcours adaptatifs (e.g. circulaire, elliptique,…etc.) dépendamment de la forme de la lésion. L’optimisation des dépôts énergétiques induit une meilleure réponse mécanique du tissu et améliore le rapport signal sur bruit pour une meilleure quantification des paramètres viscoélastiques. Il est aussi question de consolider davantage les travaux de recherches antérieurs par un appui expérimental, et de prouver que ce type particulier d'onde de torsion peut mettre en résonance des structures. Ce phénomène de résonance des structures permet de rehausser davantage le contraste de déplacement entre les masses suspectes et le milieu environnant pour une meilleure détection. Enfin, dans le cadre de la quantification des paramètres viscoélastiques des tissus, la dernière étape consiste à développer un modèle inverse basé sur la propagation des ondes de cisaillement adaptatives pour l'estimation des paramètres viscoélastiques. L'estimation des paramètres viscoélastiques se fait via la résolution d'un problème inverse intégré dans un modèle numérique éléments finis. La robustesse de ce modèle a été étudiée afin de déterminer ces limites d'utilisation. Les résultats obtenus par ce modèle sont comparés à d'autres résultats (mêmes échantillons) obtenus par des méthodes de référence (e.g. Rheospectris) afin d'estimer la précision de la méthode développée. La quantification des paramètres mécaniques des lésions permet d'améliorer la sensibilité et la spécificité du diagnostic. La caractérisation tissulaire permet aussi une meilleure identification du type de lésion (malin ou bénin) ainsi que son évolution. Cette technique aide grandement les cliniciens dans le choix et la planification d'une prise en charge adaptée.

Caractérisation des lymphocytes T CD4+CD8+ dans le contexte de la sclérose en plaques

Une petite population de lymphocytes T exprimant les deux corécepteurs CD4 et CD8 et appelée double positive (DP), a été détectée dans le sang périphérique de donneurs sains et de patients atteints de diverses pathologies dont la sclérose en plaques (SEP). Nous avons émis l’hypothèse qu’il s’agissait de lymphocytes T hautement activés pouvant contribuer à l’inflammation chronique présente dans la SEP. Nous avons comparé les cellules T DP obtenues du sang de donneurs sains et de patients atteints de la SEP et non traités. La fréquence des cellules DP était similaire chez les patients et les donneurs sains. La proportion de lymphocytes T DP qui exprimaient les chaines du récepteur de l’interleukine-15 (IL-15) était plus élevée que pour les autres populations lymphocytaires. Des mesures d’induction de la phosphorylation du STAT5 (signal transducer and activator of transcription) ont démontré que les cellules DP ont répondu à des doses plus faibles et pour de plus longues périodes à l’IL-15 comparativement aux autres lymphocytes T. Le pourcentage de lymphocytes T DP ayant la capacité de produire l’interféron-gamma et des enzymes lytiques était élevé chez les témoins sains mais ces niveaux étaient significativement réduits chez les patients atteints de la SEP. La caractérisation phénotypique de cellules DP a suggéré que ces cellules ont des propriétés similaires aux lymphocytes T activés. Bien qu’il ne s’agisse que d’une caractérisation partielle, il semble que les lymphocytes T DP perdent une partie de leurs propriétés chez les patients atteints de la SEP.

Studies on Rubber Composition as Passive Acoustic Materials in Underwater Electro Acoustic Tranducer Technology and Their aging Characteristic

The research work has been in the area of compounding and characterization of rubbers for use in under water electro acoustic transducers. The study also covers specific material system such as encapsulation materials, baffle material, seal material, etc. Life prediction techniques of under water rubbers in general have been established with reference to more than one functional property. Ranges of passive materials, besides the active sensing material go into the construction of underwater electro acoustic transducers. Reliability of the transducer is critically dependent on these passive materials. Rubbers are a major class of passive materials. The present work concentrates on these materials. Conventional rubbers are inadequate to meet many of the stringent function specific requirements. There exists a large gap of information in the rubber technology of underwater rubbers, particularly relating to underwater electro acoustic transducers. This study is towards filling up the gaps of information in this crucial area. Water intake into rubber is considered as the single most important issue for the long-term performance of rubbers, especially Neoprene. In this study, the cause and effects of a range of parameters affecting the water absorption by diffusion and permeation have been investigated.

DESIGN AND DEVELOPMENT OF COMPACT ASYMMETRIC COPLANAR STRIP FED ANTENNAS

Antennas are indispensable component of any wireless communication device. An antenna is a transducer between the transmitter and the free space waves and vice versa. They efficiently transfer electromagnetic energy from a transmission line into free space. But the present day communication applications require compact and ultra wide band designs which cannot be catered by simple microstrip based designs. PIFAs have solved the problem to some extend, but the field of antennas needs more innovative designs In this thesis the design and development of compact planner antenna are presented. Emphasis is given to the design of the feed as well as the radiator resulting in simple compact uniplanar geometries. The Asymmetric coplanar feed used to excite the antennas is found to be a suitable choice for feeding compact antennas.The main objectives of the study are the design of compact single, dual and multi band antennas with uniplanar structure and extension of the design for practical GSM/WLAN applications and Ultra compact antennas using the above techniques and extension of the design to antennas for practical applications like RFID/DVB-H. All the above objectives are thoroughly studied. Antennas with ultra compact dimensions are obtained as a result of the study. Simple equations are provided to design antennas with the required characteristics. The design equations are verified by designing different antennas for different applications.

Design Considerations of Sonar Projector Arrays with Improved Performance

Systems which employ underwater acoustic energy for observation or communication are called sonar systems. The active and passive sonars are the two types of systems used for the detection and localisation of targets in underwater. Active sonar involves the transmission of an acoustic signal which, when reflected from a target, provides the sonar receiver with a basis for the detection and estimation. Passive sonar bases its detection and estimation on sounds which emanate from the target itself--Machinery noise, flow noise, transmission from its own active sonar etc.Electroacoustic transducers are used in sonar systems for the transmission and detection of acoustic energy. The transducer which is used for the transmission of acoustic energy is called projector and the one used for reception is called hydrophone. Since a single transducer is not sufficient enough for long range and directional transmission, a properly distributed array of transducers are to be used [9-11].The need and requirement for spatial processing to generate the most favourable directivity patterns for transducer systems used in underwater applications have already been analysed by several investigators [12-21].The desired directivity pattern can be either generated by the use of suitable focussing techniques or by an array of non-directional sensor elements, whose arrangements, spacing and the mode of excitation provide the required radiation pattern or by the combination of these.While computing that the directivity pattern, it is assumed strength of the elements are unaffected by the the source acoustic pressure at each source. However, in closely packed a r r a y s , the acoustic interaction effects experienced among the elements will modify the behaviour of individual elements and in turn will reduce the acoust ic source leve 1 wi t h respect to the maximum t heoret i cal va 1ue a s well as degrade the beam pa t tern. Th i s ef fect shou 1d be reduced in systems that are intended to generate high acoustic power output and unperturbed beam patterns [2,22-31].The work herein presented includes an approach for designing efficient and well behaved underwater transd~cer arrays, taking into account the acoustic interaction effect experienced among the closely packed multielement arrays.Architectural modifications reducing the interaction effect different radiating apertures.

Evaluation of laser ablation threshold in polymer samples using pulsed photoacoustic technique

The acoustic signals generated in solids due to interaction with pulsed laser beam is used to determine the ablation threshold of bulk polymer samples of teflon (polytetrafluoroethylene) and nylon under the irradiation from a Q-switched Nd:YAG laser at 1.06µm wavelength. A suitably designed piezoelectric transducer is employed for the detection of photoacoustic (PA) signals generated in this process. It has been observed that an abrupt increase in the amplitude of the PA signal occurs at the ablation threshold. Also there exist distinct values for the threshold corresponding to different mechanisms operative in producing damages like surface morphology, bond breaking and melting processes at different laser energy densities.

Design and Development of Instrumentation Systems to determine the Dry Rubber Content in Natural Rubber Latex

Hevea latex is a natural biological liquid of very complex composition .Besides rubber hydrocarbons,it contains many proteinous and resinous substances,carbohydrates,inorganic matter,water,and others.The Dry Rubber Content (DRC) of latex varies according to season, tapping system,weather,soil conditions ,clone,age of the tree etc. The true DRC of the latex must be determined to ensure fair prices for the latex during commercial exchange.The DRC of Hevea latex is a very familiar term to all in the rubber industry.It has been the basis for incentive payments to tappers who bring in more than the daily agreed poundage of latex.It is an important parameter for rubber and latex processing industries for automation and verious decesion making processes.This thesis embodies the efforts made by me to determine the DRC of rubber latex following different analytical tools such as MIR absorption,thermal analysis.dielectric spectroscopy and NIR reflectance.The rubber industry is still Looking for a compact instrument that is accurate economical,easy to use and environment friendly.I hope the results presented in this thesis will help to realise this goal in the near future.

Studies on underwater propagation development of programmable arrays

The thesis presented here includes the designing of underwater transducer arrays, taking into account the ‘interaction effects’ [30] among the closely packed radiators. Methods of minimizing the ‘interaction effects‘ by modifying the radiating aperture, are investigated. The need for this study arises as it is one of the important peculiar limitations that stands in the way of achieving maximum range of transmission of acoustic signals. Application of the modified array format for the generation of narrow beam low frequency sound waves, through nonlinear interactions, is discussed. Other techniques that can be advantageously exploited in array synthesis are also investigated

Design And Development Of A Named Entity Based Question Answering System For Malayalam Language

This is a Named Entity Based Question Answering System for Malayalam Language. Although a vast amount of information is available today in digital form, no effective information access mechanism exists to provide humans with convenient information access. Information Retrieval and Question Answering systems are the two mechanisms available now for information access. Information systems typically return a long list of documents in response to a user’s query which are to be skimmed by the user to determine whether they contain an answer. But a Question Answering System allows the user to state his/her information need as a natural language question and receives most appropriate answer in a word or a sentence or a paragraph. This system is based on Named Entity Tagging and Question Classification. Document tagging extracts useful information from the documents which will be used in finding the answer to the question. Question Classification extracts useful information from the question to determine the type of the question and the way in which the question is to be answered. Various Machine Learning methods are used to tag the documents. Rule-Based Approach is used for Question Classification. Malayalam belongs to the Dravidian family of languages and is one of the four major languages of this family. It is one of the 22 Scheduled Languages of India with official language status in the state of Kerala. It is spoken by 40 million people. Malayalam is a morphologically rich agglutinative language and relatively of free word order. Also Malayalam has a productive morphology that allows the creation of complex words which are often highly ambiguous. Document tagging tools such as Parts-of-Speech Tagger, Phrase Chunker, Named Entity Tagger, and Compound Word Splitter are developed as a part of this research work. No such tools were available for Malayalam language. Finite State Transducer, High Order Conditional Random Field, Artificial Immunity System Principles, and Support Vector Machines are the techniques used for the design of these document preprocessing tools. This research work describes how the Named Entity is used to represent the documents. Single sentence questions are used to test the system. Overall Precision and Recall obtained are 88.5% and 85.9% respectively. This work can be extended in several directions. The coverage of non-factoid questions can be increased and also it can be extended to include open domain applications. Reference Resolution and Word Sense Disambiguation techniques are suggested as the future enhancements

Lead free heterogeneous multilayers with giant magneto electric coupling for microelectronics/microelectromechanical systems applications

Lead free magneto electrics with a strong sub resonant (broad frequency range) magneto electric coupling coefficient (MECC) is the goal of the day which can revolutionise the microelectronics and microelectromechanical systems (MEMS) industry. We report giant resonant MECC in lead free nanograined Barium Titanate–CoFe (Alloy)-Barium Titanate [BTO-CoFe-BTO] sandwiched thin films. The resonant MECC values obtained here are the highest values recorded in thin films/ multilayers. Sub-resonant MECC values are quite comparable to the highest MECC reported in 2-2 layered structures. MECC got enhanced by two orders at a low frequency resonance. The results show the potential of these thin films for transducer, magnetic field assisted energy harvesters, switching devices, and storage applications. Some possible device integration techniques are also discussed

Development of Electrochemical and Fluorescent Sensors

Chemical sensors have growing interest in the determination of food additives, which are creating toxicity and may cause serious health concern, drugs and metal ions. A chemical sensor can be defined as a device that transforms chemical information, ranging from the concentration of a specific sample component to total composition analysis, into an analytically useful signal. The chemical information may be generated from a chemical reaction of the analyte or from a physical property of the system investigated. Two main steps involved in the functioning of a chemical sensor are recognition and transduction. Chemical sensors employ specific transduction techniques to yield analyte information. The most widely used techniques employed in chemical sensors are optical absorption, luminescence, redox potential etc. According to the operating principle of the transducer, chemical sensors may be classified as electrochemical sensors, optical sensors, mass sensitive sensors, heat sensitive sensors etc. Electrochemical sensors are devices that transform the effect of the electrochemical interaction between analyte and electrode into a useful signal. They are very widespread as they use simple instrumentation, very good sensitivity with wide linear concentration ranges, rapid analysis time and simultaneous determination of several analytes. These include voltammetric, potentiometric and amperometric sensors. Fluorescence sensing of chemical and biochemical analytes is an active area of research. Any phenomenon that results in a change of fluorescence intensity, anisotropy or lifetime can be used for sensing. The fluorophores are mixed with the analyte solution and excited at its corresponding wavelength. The change in fluorescence intensity (enhancement or quenching) is directly related to the concentration of the analyte. Fluorescence quenching refers to any process that decreases the fluorescence intensity of a sample. A variety of molecular rearrangements, energy transfer, ground-state complex formation and collisional quenching. Generally, fluorescence quenching can occur by two different mechanisms, dynamic quenching and static quenching. The thesis presents the development of voltammetric and fluorescent sensors for the analysis of pharmaceuticals, food additives metal ions. The developed sensors were successfully applied for the determination of analytes in real samples. Chemical sensors have multidisciplinary applications. The development and application of voltammetric and optical sensors continue to be an exciting and expanding area of research in analytical chemistry. The synthesis of biocompatible fluorophores and their use in clinical analysis, and the development of disposable sensors for clinical analysis is still a challenging task. The ability to make sensitive and selective measurements and the requirement of less expensive equipment make electrochemical and fluorescence based sensors attractive.

The role of Ken&Barbie in JAK/STAT signalling during development of Drosophila melanogaster

Cell-cell interactions during embryonic development are crucial in the co-ordination of growth, differentiation and maintenance of many different cell types. To achieve this co-ordination each cell must properly translate signals received from neighbouring cells, into spatially and temporally appropriate developmental responses. A surprisingly limited number of signal pathways are responsible for the differentiation of enormous variety of cell types. As a result, pathways are frequently 'reused' during development. Thus, in mammals the JAK/STAT pathway is required during early embryogenesis, mammary gland formation, hematopoiesis and, finally, plays a pivotal role in immune response. In the canonical way, the JAK/STAT pathway is represented by a transmembrane receptor associated with a Janus kinase (JAK), which upon stimulation by an extra-cellular ligand, phosphorylates itself, the receptor and, finally, the signal transducer and activator of transcription (STAT) molecules. Phosphorylated STATs dimerise and translocate to the nucleus where they activate transcription of target genes. The JAK/STAT pathway has been conserved throughout evolution, and all known components are present in the genome of Drosophila melanogaster. Besides hematopoietic and immunity functions, the pathway is also required during development for processes including embryonic segmentation, tracheal morphogenesis, posterior spiracle formation etc. This study describes Drosophila Ken&Barbie (Ken) as a selective regulator of JAK/STAT signalling. ken mutations identified in a screen for modulators of an eye overgrowth phenotype, caused by over-expression of the pathway ligand unpaired, also interact genetically with the pathway receptor domeless (dome) and the transcription factor stat92E. Over-expression of Ken can phenocopy developmental defects known to be caused by the loss of JAK/STAT signalling. These genetic interactions suggest that Ken may function as a negative regulator of the pathway. Ken has C-terminal Zn-finger domain, presumably for DNA binding, and N-terminal BTB/POZ domain, often found in transcriptional repressors. Using EGFP-fused construct expressed in vivo revealed nuclear accumulation of Ken. Therefore, it is proposed that Ken may act as a suppresser of STAT92E target genes. An in vitro assay, termed SELEX, determined that Ken specifically binds to a DNA sequence, with the essential for DNA recognition core overlapping that of STAT92E. This interesting observation suggests that not all STAT92E sites may also allow Ken binding. Strikingly, when effects of ectopic Ken on the expression of putative JAK/STAT pathway target genes were examined, only a subset of the genes tested, namely vvl, trh and kni, were down-regulated by Ken, whereas some others, such as eve and fj, appeared to be unresponsive. Further analysis of vvl, one of the genes susceptible to ectopic Ken, was undertaken. In the developing hindgut, expression of vvl is JAK/STAT pathway dependent, but remains repressed in the posterior spiracles, despite the stimulation of STAT92E by Upd in their primordia. Importantly, ken is also expressed in the developing posterior spiracles. Strikingly, up-regulation of vvl is observed in these tissues in ken mutant embryos. These imply that while ectopic Ken is sufficient to repress the expression of vvl in the hindgut, endogenous Ken is also necessary to prevent its activation in the posterior spiracles. It is therefore conceivable that ectopic vvl expression in the posterior spiracles of the ken mutants may be the result of de-repression of endogenous STAT92E activity. Another consequence of these observations is a fine balance that must exist between STAT92E and Ken activities. Apparently, endogenous level of Ken is sufficient to repress vvl, but not other, as yet unidentified, JAK/STAT pathway targets, whose presumable activation by STAT92E is required for posterior spiracle development as the embryos mutant for dome, the receptor of the pathway, show severe spiracle defects. These defects are also observed in the embryos mis-expressing Ken. Though it is possible that the posterior spiracle phenotype caused by higher levels of Ken results from a JAK/STAT pathway independent activity, it seems to be more likely that Ken acts in a dosage dependent manner, and extra Ken is able to further antagonise JAK/STAT pathway target genes. While STAT92E binding sites required for target gene expression have been poorly characterised, the existence of genome data allows the prediction of candidate STAT92E sites present in target genes promoters to be attempted. When a 6kb region containing the putative regulatory domains flanking the vvl locus are examined, only a single potential STAT92E binding site located 825bp upstream of the translational start can be detected. Strikingly, this site also includes a perfect Ken binding sequence. Such an in silico observation, though consistent with both Ken DNA binding assay in vitro and regulation of STAT92E target genes in vivo, however, requires further analysis. The JAK/STAT pathway is implicated in a variety of processes during embryonic and larval development as well as in imago. In each case, stimulation of the same transcription factor results in different developmental outcomes. While many potential mechanisms have been proposed and demonstrated to explain such pleiotropy, the present study indicates that Ken may represent another mechanism, with which signal transduction pathways are controlled. Ken selectively down-regulates a subset of potential target genes and so modifies the transcriptional profile generated by activated STAT92E - a mechanism, which may be partially responsible for differences in the morphogenetic processes elicited by JAK/STAT signalling during development.

Characterization of the role of Drosophila JAK/STAT signalling in cellular proliferation

Der Janus Kinase / signal transducer and activator of transcription (JAK/STAT) Signal- transduktionsweg wird für viele Entwicklungsvorgänge benötigt und spielt eine zentrale Rolle bei der Hämatopoese und bei der Immunantwort. Obwohl der JAK/STAT-Signalweg in den vergangenen Jahren Gegenstand intensiver Forschung war, erschwert die Redundanz des Signalwegs bei Wirbeltieren genetische Untersuchungen zur Identifizierung derjenigen Mechanismen, die den JAK/STAT-Signalweg regulieren. Der JAK/STAT-Signaltransduktionsweg ist evolutionär konserviert und ebenfalls bei der Taufliege Drosophila melanogaster vorhanden. Im Gegensatz zu Wirbeltieren ist der Signaltransduktionsweg von Drosophila weniger redundant und beinhaltet folgende Hauptkomponenten: den Liganden Unpaired (Upd), den Transmembranrezeptor Domeless (Dome), die einzige JAK-Tyrosinkinase Hopscotch (hop), sowie den Transkriptionsfaktor STAT92E. In der vorliegenden Arbeit wird die Rolle des JAK/STAT-Signalwegs bei der zellulären Proliferation mithilfe der Modellsysteme der Flügel- und der Augen-Imaginalscheiben von Drosophila charakterisiert. "Loss-of-function"- und "Gain-of-function"-Experimente zur Verminderung beziehungs-weise Erhöhung der Signalaktivität zeigten, dass der JAK/STAT-Signalweg eine Rolle bei der zellulären Proliferation der Flügel-Imaginalscheiben spielte, ohne die Zellgröße oder Apoptose zu verändern. Bei der Flügelentwicklung während des zweiten und des frühen dritten Larvalstadiums war die Aktivität des JAK/STAT-Signalwegs sowohl notwendig für die zelluläre Proliferation als auch hinreichend, um Überproliferation anzutreiben. Allerdings änderte sich während der späten dritten Larvalstadien die JAK/STAT-Signalaktivität, sodass endogene STAT92E-Mengen einen anti-proliferativen Effekt im gleichen Gewebe aufwiesen. Weiterhin reichte die ektopische Aktivierung des JAK/STAT-Signalwegs zu diesem späten Entwicklungszeitpunkt aus, um die Mitose zu inhibieren und die Zellen in der Phase G2 des Zellzyklus zu arretieren. Diese Ergebnisse legen den Schluss nahe, dass der JAK/STAT-Signalweg sowohl pro-proliferativ in frühen Flügelscheiben als auch anti-proliferativ zu späten Stadien der Flügelscheiben-Entwicklung wirken kann. Dieser späte anti-proliferative Effekt wurde durch einen nicht-kanonischen Mechanismus der STAT92E-Aktivierung vermittelt, da späte hop defiziente Zellverbände im Vergleich zu Wildtyp-Zellen keine Veränderungen im Ausmaß der zellulären Proliferation aufwiesen. Ferner konnte gezeigt werden, dass eine während der Larvalstadien exprimierte dominant-negative und im N-Terminus deletierte Form von STAT92E (?NSTAT92E) nicht für den anti-proliferativen Effekt verantwortlich ist. Diese Tatsache ist ein weiteres Indiz dafür, dass das vollständige STAT92E den späten anti-proliferativen Effekt verursacht. Um Modulatoren für die von JAK/STAT vermittelte zelluläre Proliferation zu identifieren, wurde ein P-Element-basierter genetischer Interaktions-Screen in einem sensibilisierten genetischen Hintergrund durchgeführt. Insgesamt wurden dazu 2267 unabhängige P-Element-Insertionen auf ihre Wechselwirkung mit der JAK/STAT-Signalaktivität untersucht und 24 interagierende Loci identifiziert. Diese Kandidaten können in folgende Gruppen eingeordnet werden: Zellzyklusproteine, Transkriptionsfaktoren, DNA und RNA bindende Proteine, ein Mikro-RNA-Gen, Komponenten anderer Signaltransduktionswege und Zelladhäsionsproteine. In den meisten Fällen wurden mehrere Allele der interagierenden Kandidatengene getestet. 18 Kandidatengene mit übereinstimmend interagierenden Allelen wurden dann zur weiteren Analyse ausgewählt. Von diesen 18 Kandidaten-Loci wurden 7 mögliche JAK/STAT-Signalwegskomponenten und 6 neue Zielgene des Signalwegs gefunden. Zusammenfassend wurde das Verständnis um STAT92E verbessert. Dieses Protein hat die gleiche Funktion wie das STAT3-Protein der Wirbeltiere und treibt die zelluläre Proliferation voran. Analog zu STAT1 hat STAT92E aber auch einen anti-proliferativen Effekt. Ferner wurden 24 mögliche Modulatoren der JAK/STAT-Signalaktivität identifiziert. Die Charakterisierung dieser Wechselwirkungen eröffnet vielversprechende Wege zu dem Verständnis, wie JAK/STAT die zelluläre Proliferation reguliert und könnte bei der Entwicklung von neuartigen therapeutischen Targets zur Behandlung von Krebskrankheiten und Entwicklungsstörungen beitragen.

Chemical gas sensors based on functionalized self-actuated piezo-resistive cantilevers

Der Schwerpunkt dieser Arbeit liegt in der Anwendung funktionalisierter Mikrocantilever mit integrierter bimorpher Aktuation und piezo-resistiver Detektion als chemische Gassensoren für den schnellen, tragbaren und preisgünstigen Nachweis verschiedener flüchtiger Substanzen. Besondere Beachtung erfährt die Verbesserung der Cantilever-Arbeitsleistung durch den Betrieb in speziellen Modi. Weiterer Schwerpunkt liegt in der Untersuchung von spezifischen Sorptionswechselwirkungen und Anwendung von innovativen Funktionsschichten, die bedeutend auf die Sensorselektivität wirken.

Relations and Transductions Realized by Restarting Automata

Gegenstand der vorliegenden Arbeit ist die Analyse verschiedener Formalismen zur Berechnung binärer Wortrelationen. Dabei ist die Grundlage aller hier ausgeführten Betrachtungen das Modell der Restart-Automaten, welches 1995 von Jancar et. al. eingeführt wurde. Zum einen wird das bereits für Restart-Automaten bekannte Konzept der input/output- und proper-Relationen weiterführend untersucht, sowie auf Systeme von zwei parallel arbeitenden und miteinander kommunizierenden Restart-Automaten (PC-Systeme) erweitert. Zum anderen wird eine Variante der Restart-Automaten eingeführt, die sich an klassischen Automatenmodellen zur Berechnung von Relationen orientiert. Mit Hilfe dieser Mechanismen kann gezeigt werden, dass einige Klassen, die durch input/output- und proper-Relationen von Restart Automaten definiert werden, mit den traditionellen Relationsklassen der Rationalen Relationen und der Pushdown-Relationen übereinstimmen. Weiterhin stellt sich heraus, dass das Konzept der parallel kommunizierenden Automaten äußerst mächtig ist, da bereits die Klasse der proper-Relationen von monotonen PC-Systemen alle berechenbaren Relationen umfasst. Der Haupteil der Arbeit beschäftigt sich mit den so genannten Restart-Transducern, welche um eine Ausgabefunktion erweiterte Restart-Automaten sind. Es zeigt sich, dass sich insbesondere dieses Modell mit seinen verschiedenen Erweiterungen und Einschränkungen dazu eignet, eine umfassende Hierarchie von Relationsklassen zu etablieren. In erster Linie seien hier die verschiedenen Typen von monotonen Restart-Transducern erwähnt, mit deren Hilfe viele interessante neue und bekannte Relationsklassen innerhalb der längenbeschränkten Pushdown-Relationen charakterisiert werden. Abschließend wird, im Kontrast zu den vorhergehenden Modellen, das nicht auf Restart-Automaten basierende Konzept des Übersetzens durch Beobachtung ("Transducing by Observing") zur Relationsberechnung eingeführt. Dieser, den Restart-Transducern nicht unähnliche Mechanismus, wird im weitesten Sinne dazu genutzt, einen anderen Blickwinkel auf die von Restart-Transducern definierten Relationen einzunehmen, sowie eine obere Schranke für die Berechnungskraft der Restart-Transducer zu gewinnen.