Impacts of Internal Curing on Concrete Properties, TR-676, 2015

Conventional concrete is typically cured using external methods. External curing prevents drying of the surface, allows the mixture to stay warm and moist, and results in continued cement hydration (Taylor 2014). Internal curing is a relatively recent technique that has been developed to prolong cement hydration by providing internal water reservoirs in a concrete mixture that do not adversely affect the concrete mixture’s fresh or hardened physical properties. Internal curing grew out of the need for more durable structural concretes that were resistant to shrinkage cracking. Joint spacing for concrete overlays can be increased if slab warping is reduced or eliminated. One of the most promising potential benefits from using internal curing for concrete overlays, then, is the reduced number of joints due to increased joint spacing (Wei and Hansen 2008).

GUS gene expression driven by a citrus promoter in transgenic tobacco and 'Valencia' sweet orange

The objective of this work was the transformation of tobacco and 'Valencia' sweet orange with the GUS gene driven by the citrus phenylalanine ammonia-lyase (PAL) gene promoter (CsPP). Transformation was accomplished by co-cultivation of tobacco and 'Valência' sweet orange explants with Agrobacterium tumefaciens containing the binary vector CsPP-GUS/2201. After plant transformation and regeneration, histochemical analyses using GUS staining revealed that CsPP promoter preferentially, but not exclusively, conferred gene expression in xylem tissues of tobacco. Weaker GUS staining was also detected throughout the petiole region in tobacco and citrus CsPP transgenic plants.

Portland Cement Concrete Curing Compound Performance Phase I and Phase II, MLR-02-03, 2003

Testing the efficiency of Portland Cement Concrete (PCC) curing compounds is currently done following Test Method Iowa 901-D, May 2002. Concrete test specimens are prepared from mortar materials and are wet cured 5 hours before the curing compound is applied. All brands of curing compound submitted to the Iowa Department of Transportation are laboratory tested for comparative performance under the same test conditions. These conditions are different than field PCC paving conditions. Phase I tests followed Test Method Iowa 901-D, but modified the application amounts of the curing compound. Test results showed that the application of two coats of one-half thickness each increased efficiency compared to one full thickness coat. Phase II tests also used the modified application amounts, used a concrete mix (instead of a mortar mix) and applied curing compound a few minutes after molding. Measurements of losses, during spraying of the curing compound, were noted and were found to be significant. Test results showed that application amounts, testing techniques, concrete specimen mix design and spray losses do influence the curing compound efficiency. The significance of the spray losses indicates that the conventional test method being used (Iowa 901 D) should be revised.

Examination of Curing Criteria for Cold In-Place Recycling, TR-553, 2008

Cold In-Place Recycling (CIR) has been used widely in rehabilitating the rural highways because it improves a long-term pavement performance. A CIR layer is normally covered by a hot mix asphalt (HMA) overlay in order to protect it from water ingress and traffic abrasion and obtain the required pavement structure and texture. Curing is the term currently used for the period of time that a CIR layer should remain exposed to drying conditions before an HMA overlay is placed. The industry standard for curing time is 10 days to 14 days or a maximum moisture content of 1.5 percent, which appear to be very conservative. When the exposed CIR layer is required to carry traffic for many weeks before the wearing surface is placed, it increases the risk of a premature failure in both CIR layer and overlay. This study was performed to explore technically sound ways to identify minimum in-place CIR properties necessary to permit placement of the HMA overlay. To represent the curing process of CIR pavement in the field construction, three different laboratory curing procedures were examined: 1) uncovered, 2) semi-covered and 3) covered specimens. The indirect tensile strength of specimens in all three curing conditions did not increase during an early stage of curing but increased during a later stage of curing usually when the moisture content falls below 1.5%. Dynamic modulus and flow number increased as curing time increased and moisture contents decreased. For the same curing time, CIR-foam specimens exhibited the higher tensile strength and less moisture content than CIR-emulsion. The laboratory test results concluded that the method of curing temperature and length of the curing period significantly affect the properties of the CIR mixtures. The moisture loss index was developed to predict the moisture condition in the field and, in the future, this index be calibrated with the measurements of temperature and moisture of a CIR layer in the field.

Examination of Curing Criteria for Cold In-Place Recycling Phase 2: Measuring Temperature, Moisture, Deflection and Distress from CIR Test Section, TR-590, 2009

The previous research performed laboratory experiments to measure the impacts of the curing on the indirect tensile strength of both CIR-foam and CIR-emulsion mixtures. However, a fundamental question was raised during the previous research regarding a relationship between the field moisture content and the laboratory moisture content. Therefore, during this research, both temperature and moisture conditions were measured in the field by embedding the sensors at a midpoint and a bottom of the CIR layer. The main objectives of the research are to: (1) measure the moisture levels throughout a CIR layer and (2) develop a moisture loss index to determine the optimum curing time of CIR layer before HMA overlay. To develop a set of moisture loss indices, the moisture contents and temperatures of CIR-foam and CIR-emulsion layers were monitored for five months. Based on the limited field experiment, the following conclusions are derived: 1. The moisture content of the CIR layer can be monitored accurately using the capacitance type moisture sensor. 2. The moisture loss index for CIR layers is a viable tool in determining the optimum timing for an overlay without measuring actual moisture contents. 3. The modulus back-calculated based on the deflection measured by FWD seemed to be in a good agreement with the stiffness measured by geo-gauge. 4. The geo-gauge should be considered for measuring the stiffness of CIR layer that can be used to determine the timing of an overlay. 5. The stiffness of CIR-foam layer increased as a curing time increased and it seemed to be more influenced by a temperature than moisture content. The developed sets of moisture loss indices based on the field measurements will help pavement engineers determine an optimum timing of an overlay without continually measuring moisture conditions in the field using a nuclear gauge.

Examination of Curing Criteria for Cold In-Place Recycling (Phase 3: Calibration of Moisture Loss Indices and Development of Stiffness Gain Model), TR-609, 2011

In the previous study, moisture loss indices were developed based on the field measurements from one CIR-foam and one CIR-emulsion construction sites. To calibrate these moisture loss indices, additional CIR construction sites were monitored using embedded moisture and temperature sensors. In addition, to determine the optimum timing of an HMA overlay on the CIR layer, the potential of using the stiffness of CIR layer measured by geo-gauge instead of the moisture measurement by a nuclear gauge was explored. Based on the monitoring the moisture and stiffness from seven CIR project sites, the following conclusions are derived: 1. In some cases, the in-situ stiffness remained constant and, in other cases, despite some rainfalls, stiffness of the CIR layers steadily increased during the curing time. 2. The stiffness measured by geo-gauge was affected by a significant amount of rainfall. 3. The moisture indices developed for CIR sites can be used for predicting moisture level in a typical CIR project. The initial moisture content and temperature were the most significant factors in predicting the future moisture content in the CIR layer. 4. The stiffness of a CIR layer is an extremely useful tool for contractors to use for timing their HMA overlay. To determine the optimal timing of an HMA overlay, it is recommended that the moisture loss index should be used in conjunction with the stiffness of the CIR layer.

Tobacco and tuberculosis

Smoking is not only the most important source of avoidable disability and death, but a risk factor for TB infection, disease and death. Even passive smoking exposure may increase the risk of infection and disease in adults and children exposed to TB. Considering the increase in tobacco consumption in developing countries, where the prevalence of TB is the highest, smoking may be responsible for a large part of the burden of disease. Therefore, medical advice and counselling in smoking cessation is an important activity for all care providers engaged in management of TB

Tobacco and cannabis smoking cessation can lead to intoxication with clozapine or olanzapine

Plasma levels of clozapine and olanzapine are lower in smokers than in nonsmokers, which is mainly due to induction of cytochrome P4501A2 (CYP1A2) by some smoke constituents. Smoking cessation in patients treated with antipsychotic drugs that are CYP1A2 substrates may result in increased plasma levels of the drug and, consequently, in adverse drug effects. Two cases of patients who smoked tobacco and cannabis are reported. The first patient, who was receiving clozapine treatment, developed confusion after tobacco and cannabis smoking cessation, which was related to increased clozapine plasma levels. The second patient, who was receiving olanzapine treatment, showed important extrapyramidal motor symptoms after reducing his tobacco consumption. The clinical implication of these observations is that smoking patients treated with CYP1A2 substrate antipsychotics should regularly be monitored with regard to their smoking consumption in order to adjust doses in cases of a reduction or increase in smoking.

Treating tobacco use and dependence in clinical practice.

Physicians are in a unique position to advise smokers to quit by the ability to integrate the various aspects of nicotine dependence. This review provides an overview of the intervention strategies for smokers presented in a primary care setting. The strategies that are used for smoking cessation counselling differ according to the patient's readiness to quit. For smokers who do not intend to give up smoking, physicians should inform about tobacco use and the benefits of cessation. For smokers who are dissonant, physicians should use motivational strategies, such as discussing the barriers to successful cessation and their solutions. For smokers who are ready to quit, the physician should show strong support, help set a date to quit, prescribe pharmaceutical therapies for nicotine dependence, such as nicotine replacement therapy (i.e., gum, transdermal patch, nasal spray, mouth inhaler, lozenges, and micro and sublingual tablets) and/or bupropion (an atypical antidepressant thought to work by blocking the neural re-uptake of dopamine and/or noradrenaline), with instructions for use, and suggest behavioural strategies to prevent relapse. The efficacy of all of these pharmacotherapies is comparable, roughly doubling the cessation rates over control conditions.

Cannabis and tobacco co-consumptions: can cannabis consumers quit cigarette smoking?

Purpose: To assess the relation between cannabis and tobacco consumption among adolescents in Switzerland and whether cannabis and tobacco co-users can quit cigarette smoking. Methods: Based on individual interviews and focus groups, 22 youths aged 15-20 discussed cannabis consumption behaviours. Twenty (14 males) were cannabis consumers - of which 18 also smoked tobacco and 2 quit tobacco smoking - and 2 were former cannabis consumers (both females and daily smokers). Data were transcribed verbatim and analyzed using Atlas.ti qualitative analysis software. Results: Among the co-consumers, 9 started with tobacco, 7 with cannabis, and 2 with both. The main consumption mode among all cannabis consumers is joints, while other ways of consuming such as food preparations and water pipes are rare and experimental. Joints always mix cannabis with tobacco for 3 reasons: to burn correctly, pure cannabis is too strong, and smoking cannabis alone is too expensive. Two cannabis consumers - one former tobacco smoker and one occasional tobacco smoker - consider rolling tobacco less addictive than cigarette tobacco alone, and hence use it in their joints. Overall cannabis is considered 'natural' and less harmful to health than tobacco. Thus, many users describe their wish, in the longer term, to quit tobacco consumption without excluding occasional cannabis consumption. Nonetheless, all coconsumers declare that they smoke cigarettes as a substitute for cannabis: For example, "If I don't have a joint, I need fags; if I don't have fags, I need joints; and if I don't have anything, I go crazy!" or "About 20 minutes after smoking a joint we feel like smoking something again, because in the joint there is pure tobacco without a filter as in cigarettes, and that creates a crazy dependency!". Finally, all co-consumers state that the consumption of one of the substances increases when trying to diminish the other: "A few months ago I stopped smoking joints for a month. Well I was smoking more than a pack [of cigarettes] a day." Similarly, the 2 former cannabis consumers increased their cigarette use since quitting cannabis. Conclusions: The majority of cannabis users co-consume tobacco as a way of compensating for one substance or the other. Using tobacco within joints implies that there is a risk that even occasional joints can revive nicotine addiction. Consequently, health professionals wishing to help adolescents in substance use cessation and prevention efforts should consider both substances in a global perspective. Sources of Support: Dept. of Public Health of the canton of Vaud.

Adding tobacco to cannabis: its frequency and likely implications.

INTRODUCTION: Young cannabis users are at increased risk of later cigarette initiation and progression to nicotine addiction. The present study addresses the frequency at which mulling (adding tobacco to cannabis smoked as joints) is performed and in which way this practice varies according to cigarette smoking status. METHODS: Data were issued from the Swiss 2007 European School Survey Project on Alcohol and other Drugs (ESPAD). A total of 881 past month cannabis users (mean age 15 years, boys 60.1%) were inquired on mulling using an anonymous self-administered questionnaire. Participants were further grouped according to their cigarette smoking status (daily, occasional, former, and never-smokers). RESULTS: Four of every 5 cannabis users depicted mulling as frequently performed. The highest occurrence was found among daily cigarette smokers (DSC; 90.3%), while former cigarette smokers reported the lowest (58.9%). The multinomial logistic regression showed DSC more likely reporting mulling as frequent compared with never-smokers (risk ratio = 3.56 [95% CI 1.55-8.21]). Conclusions: Mulling appears to be a very common process among young cannabis users, especially among concomitant cigarette smokers. Nevertheless, the majority of cigarette abstainers also reported frequently adding tobacco to the cannabis they smoke. Because it may represent a significant exposition to nicotine, mulling should be taken into account when assessing substance use among adolescents and in supporting their quitting attempts.

Division of Tobacco Use prevention and Control 2014-2018 Strategic Plan,

The Division of Tobacco Use Prevention and Control works to reduce tobacco use and the toll of tobacco-caused disease and death by preventing youth from starting, helping Iowans to quit, and preventing exposure to secondhand smoke. Tobacco is the leading preventable cause of death for Iowans, taking the lives of more than 4,400 adults each year. Estimated annual health care costs in Iowa directly related to tobacco use now total $1 billion.