A new Salmonella typhimurium NM5004 strain expressing rat glutathione S-transferase 5-5 : use in detection of genotoxicity of dihaloalkanes using an SOS/umu test system

The Escherichia coli mu operon was subcloned into a pKK233-2 vector containing rat glutathione S-transferase (GST) 5-5 cDNA and the plasmid thus obtained was introduced into Salmonella typhimurium TA1535. The newly developed strain S.typhimurium NM5004, was found to have 52-fold greater GST activity than the original umu strain S.typhimurium TA1535/pSK1002. We compared sensitivities of these two tester strains, NM5004 and TA1535/ pSK1002, for induction of umuC gene expression with several dihaloalkanes which are activated or inactivated by GST 5-5 activity. The induction of umuC gene expression by these chemicals was monitored by measuring the cellular P-galactosidase activity produced by umuC'lacZ fusion gene in these two tester strains. Ethylene dibromide, 1-bromo-2-chloroethane, 1,2-dichloroethane, and methylene dichloride induced umuC gene expression more strongly in the NM5004 strain than the original strain, 4-Nitroquinoline 1-oxide and N-methyl-N'-nitro-N-nitrosoguanidine were found to induce umuC gene expression to similar extents in both strains. In the case of 1-nitropyrene and 2-nitrofluorene, however, NM5004 strain showed weaker umuC gene expression responses than the original TA1535/ pSK1002 strain, 1,2-Epoxy-3-(4'-nitrophenoxy)propane, a known substrate for GST 5-5, was found to inhibit umuC induction caused by 1-bromo-2-chloroethane. These results indicate that this new tester NM5004 strain expressing a mammalian GST theta class enzyme may be useful for studies of environmental chemicals proposed to be activated or inactivated by GST activity.

Test, test, test, transmedia

In this 1972 documentary, The Computer Generation, by John Musilli, artist Stan Vanderbeek talks about the possibility of computers as an artist tool. My aim with drawing on this documentary is to compare the current state of transmedia with previous significant changes in media history, to illustrate how the current state of transmedia is quite diverse.

Implementation of sustainable evidence-based practice for the assessment and management of pain in residential aged care facilities

Pain is common in residential aged care facilities (RACFs). In 2005, the Australian Pain Society developed 27 recommendations for good practice in the identification, assessment, and management of pain in these settings. This study aimed to address implementation of the standards and evaluate outcomes. Five facilities in Australia participated in a comprehensive evaluation of RACF pain practice and outcomes. Pre-existing pain management practices were compared with the 27 recommendations, before an evidence-based pain management program was introduced that included training and education for staff and revised in-house pain-management procedures. Post-implementation audits evaluated the program's success. Aged care staff teams also were assessed on their reports of self-efficacy in pain management. The results show that before the implementation program, the RACFs demonstrated full compliance on 6 to 12 standards. By the project's completion, RACFs demonstrated full compliance with 10 to 23 standards and major improvements toward compliance in the remaining standards. After implementation, the staff also reported better understanding of the standards (p < .001) or of facility pain management guidelines (p < .001), increased confidence in therapies for pain management (p < .001), and increased confidence in their training to assess pain (p < .001) and recognize pain in residents with dementia who are nonverbal (p = .003). The results show that improved evidence-based practice in RACFs can be achieved with appropriate training and education. Investing resources in the aged care workforce via this implementation program has shown improvements in staff self-efficacy and practice.

An evidence-based program to improve analgesic practice and pain outcomes in residential aged care facilities

Pain is common in individuals living in residential aged care facilities (RACFs), and a number of obstacles have been identified as recurring barriers to adequate pain management. To address this, the Australian Pain Society developed 27 recommendations for comprehensive good practice in the identification, assessment, and management of pain. This study reviewed preexisting pain management practice at five Australian RACFs and identified changes needed to implement the recommendations and then implemented an evidence-based program that aimed to facilitate better pain management. The program involved staff training and education and revised in-house pain-management procedures. Reviews occurred before and after the program and included the assessment of 282 residents for analgesic use and pain status. Analgesic use improved after the program (P<.001), with a decrease in residents receiving no analgesics (from 15% to 6%) and an increase in residents receiving around-the-clock plus as-needed analgesics (from 24% to 43%). There were improvements in pain relief for residents with scores indicative of pain, with Abbey pain scale (P=.005), Pain Assessment in Advanced Dementia Scale (P=.001), and Non-communicative Patient's Pain Assessment Instrument scale (P<.001) scores all improving. Although physical function declined as expected, Medical Outcomes Study 36-item Short-Form Survey bodily pain scores also showed improvement (P=.001). Better evidence-based practice and outcomes in RACFs can be achieved with appropriate training and education. Investing resources in the aged care workforce using this program improved analgesic practice and pain relief in participating sites. Further attention to the continued targeted pain management training of aged care staff is likely to improve pain-focused care for residents.

Supporting residents’ expression of sexuality : the initial construction of a sexuality assessment tool for residential aged care facilities

Background: Sexuality is a key component of quality of life and well-being and a need to express one’s sexuality continues into old age. Staff and families in residential aged care facilities often find expressions of sexuality by residents, particularly those living with dementia, challenging and facilities often struggle to address individuals’ needs in this area. This paper describes the development of an assessment tool which enables residential aged care facilities to identify how supportive their organisation is of all residents’ expression of their sexuality, and thereby improve where required. Methods: Multi-phase design using qualitative methods and a Delphi technique. Tool items were derived from the literature and verified by qualitative interviews with aged care facility staff, residents and families. The final item pool was confirmed via a reactive Delphi process. Results: A final item pool of sixty-nine items grouped into seven key areas allows facilities to score their compliance with the areas identified as being supportive of older people’s expression of their sexuality in a residential aged care environment. Conclusions: The sexuality assessment tool (SexAT) guides practice to support the normalization of sexuality in aged care homes and assists facilities to identify where enhancements to the environment, policies, procedures and practices, information and education/training are required. The tool also enables facilities to monitor initiatives in these areas over time.

Reproducibility of subjective appetite ratings and ad libitum test meal energy intake in overweight and obese males

Background To determine whether changes in appetite and energy intake (EI) can be detected and play a role in the effectiveness of interventions, it is necessary to identify their variability under normal conditions. We assessed the reproducibility of subjective appetite ratings and ad libitum test meal EI after a standardised pre-load in overweight and obese males. Methods Fifteen overweight and obese males (BMI 30.3 ± 4.9 kg/m2, aged 34.9 ± 10.6 years) completed two identical test days, 7 days apart. Participants were provided with a standardised fixed breakfast (1676 kJ) and 5 h later an ad libitum pasta lunch. An electronic appetite rating system was used to assess subjective ratings before and after the fixed breakfast, and periodically during the postprandial period. EI was assessed at the ad libitum lunch meal. Sample size estimates for paired design studies were calculated. Results Appetite ratings demonstrated a consistent oscillating pattern between test days, and were more reproducible for mean postprandial than fasting ratings. The correlation between ad libitum EI on the two test days was r = 0.78 (P < 0.01). Using a paired design and a power of 0.8, a minimum of 12 participants would be needed to detect a 10 mm change in 5 h postprandial mean ratings and 17 to detect a 500 kJ difference in ad libitum EI. Conclusion Intra-individual variability of appetite and ad libitum test meal EI in overweight and obese males is comparable to previous reports in normal weight adults. Sample size requirements for studies vary depending on the parameter of interest and sensitivity needed.

Design and test of a custom instrumented leg press for injury and recovery intervention

There is an increasing desire and emphasis to integrate assessment tools into the everyday training environment of athletes. These tools are intended to fine-tune athlete development, enhance performance and aid in the development of individualised programmes for athletes. The areas of workload monitoring, skill development and injury assessment are expected to benefit from such tools. This paper describes the development of an instrumented leg press and its application to testing leg dominance with a cohort of athletes. The developed instrumented leg press is a 45° reclining sled-type leg press with dual force plates, a displacement sensor and a CCD camera. A custom software client was developed using C#. The software client enabled near-real-time display of forces beneath each limb together with displacement of the quad track roller system and video feedback of the exercise. In recording mode, the collection of athlete particulars is prompted at the start of the exercise, and pre-set thresholds are used subsequently to separate the data into epochs from each exercise repetition. The leg press was evaluated in a controlled study of a cohort of physically active adults who performed a series of leg press exercises. The leg press exercises were undertaken at a set cadence with nominal applied loads of 50%, 100% and 150% of body weight without feedback. A significant asymmetry in loading of the limbs was observed in healthy adults during both the eccentric and concentric phases of the leg press exercise (P < .05). Mean forces were significantly higher beneath the non-dominant limb (4–10%) and during the concentric phase of the muscle action (5%). Given that symmetrical loading is often emphasized during strength training and remains a common goal in sports rehabilitation, these findings highlight the clinical potential for this instrumented leg press system to monitor symmetry in lower-limb loading during progressive strength training and sports rehabilitation protocols.

Are empowered women more likely to deliver in facilities? An explorative study using the Nepal Demographic and Health Survey 2011

Development literature has argued that empowering women can effectively increase the utilisation of maternal health care. This study examines this hypothesis in the context of Nepal where only 28% of women delivered in facilities. The two-level random intercept logit models were fitted for data from the Nepal Demographic and Health Surveys 2011. Women‟s empowerment was quantified with a single index constructed from many variables. These variables captured different aspects of women‟s lives and decision-making in their households, and were combined using the principal component analysis method. The results confirmed a positive relationship between women‟s as an inevitable product of the economic development process.

"The red dress or the blue?" How do staff perceive that they support decision making for people with dementia living in residential aged care facilities?

Respect for a person's right to make choices and participate in decision making is generally seen as central to quality of life and well-being. When a person moves into a residential aged care facility (RACF), however, decision making becomes more complicated, particularly if the person has a diagnosis of dementia. Little is known about how staff in RACFs perceive that they support decision making for people with dementia within their everyday practice, and this article seeks to address this knowledge gap. The article reports on the findings of a qualitative study conducted in the states of Victoria and Queensland, Australia with 80 direct care staff members. Findings revealed that the participants utilized a number of strategies in their intention to support decision making for people with dementia, and had an overall perception that "a little effort goes a long way."

A new ambiguity acceptance test threshold determination method with controllable failure rate

The ambiguity acceptance test is an important quality control procedure in high precision GNSS data processing. Although the ambiguity acceptance test methods have been extensively investigated, its threshold determine method is still not well understood. Currently, the threshold is determined with the empirical approach or the fixed failure rate (FF-) approach. The empirical approach is simple but lacking in theoretical basis, while the FF-approach is theoretical rigorous but computationally demanding. Hence, the key of the threshold determination problem is how to efficiently determine the threshold in a reasonable way. In this study, a new threshold determination method named threshold function method is proposed to reduce the complexity of the FF-approach. The threshold function method simplifies the FF-approach by a modeling procedure and an approximation procedure. The modeling procedure uses a rational function model to describe the relationship between the FF-difference test threshold and the integer least-squares (ILS) success rate. The approximation procedure replaces the ILS success rate with the easy-to-calculate integer bootstrapping (IB) success rate. Corresponding modeling error and approximation error are analysed with simulation data to avoid nuisance biases and unrealistic stochastic model impact. The results indicate the proposed method can greatly simplify the FF-approach without introducing significant modeling error. The threshold function method makes the fixed failure rate threshold determination method feasible for real-time applications.

Transformerless PV inverters - recent test results and a discussion of DC current injection and safety issues

With the variety of PV inverter types and the number of transformerless PV inverters on the Australian market increasing, we revisit some of the issues associated with these topologies. A recent electric shock incident in Queensland (luckily without serious outcome) associated with a transformerless PV system, highlights the need for earthing PV array structures and PV module frames to prevent capacitive leakage currents causing electric shock. The presented test results of the relevant voltages associated with leakage currents of five transformerless PV inverters stress this requirement, which is currently being addressed by both the Clean Energy Council and Standards Australia. DC current injection tests were performed on the same five inverters and were used to develop preliminary recommendations for a more meaningful DC current test procedure for AS4777 Part 2. The test circuit, methodology and results are presented and discussed. A notable temperature dependency of DC current injections with three of the five inverters suggests that DC current injection should be tested at high and low internal inverter temperatures whereas the power dependency noted only for one inverter does not seem to justify recommendations for a (rather involved) standard test procedure at different power levels.

Reliability in the Parameterization of the Functional Reach Test in Elderly Stroke Patients: A Pilot Study

BACKGROUND: Postural instability is one of the major complications found in stroke survivors. Parameterising the functional reach test (FRT) could be useful in clinical practice and basic research. OBJECTIVES: To analyse the reliability, sensitivity, and specificity in the FRT parameterisation using inertial sensors for recording kinematic variables in patients who have suffered a stroke. DESIGN: Cross-sectional study. While performing FRT, two inertial sensors were placed on the patient's back (lumbar and trunk). PARTICIPANTS: Five subjects over 65 who suffer from a stroke. MEASUREMENTS: FRT measures, lumbosacral/thoracic maximum angular displacement, maximum time of lumbosacral/thoracic angular displacement, time return initial position, and total time. Speed and acceleration of the movements were calculated indirectly. RESULTS: FRT measure is  12.75±2.06 cm. Intrasubject reliability values range from 0.829 (time to return initial position (lumbar sensor)) to 0.891 (lumbosacral maximum angular displacement). Intersubject reliability values range from 0.821 (time to return initial position (lumbar sensor)) to 0.883 (lumbosacral maximum angular displacement). FRT's reliability was 0.987 (0.983-0.992) and 0.983 (0.979-0.989) intersubject and intrasubject, respectively. CONCLUSION: The main conclusion could be that the inertial sensors are a tool with excellent reliability and validity in the parameterization of the FRT in people who have had a stroke.

Potentially inappropriate prescribing in older patients discharged from acute care hospitals to residential aged care facilities

Background The frequency of prescribing potentially inappropriate medications (PIMs) in older patients remains high despite evidence of adverse outcomes from their use. Little is known about whether admission to hospital has any effect on appropriateness of prescribing. Objectives This study aimed to identify the prevalence and nature of PIMs and explore the association of risk factors for receiving a PIM. Methods This was a prospective study of 206 patients discharged to residential aged care facilities (RACFs) from acute care. All patients were aged at least 70 years and were admitted between July 2005 and May 2010; their admission and discharge medications were evaluated. Results Mean patient age was 84.8 ± 6.7 years; the majority (57%) were older than 85 years and mean (SD) Frailty Index was 0.42 (0.15). At least one PIM was identified in 112 (54.4%) patients on admission and 102 (49.5%) patients on discharge. Of all medications prescribed at admission (1728), 10.8% were PIMs and at discharge of 1759 medications, 9.6% were PIMs. Of total 187 PIMs on admission, 56 (30%) were stopped and 131 were continued; 32 new PIMs were introduced. Of the potential risk factors considered, in-hospital cognitive decline and frailty status were the only significant predictors of PIMs. Conclusion Although, admission to hospital is an opportunity to review the indications for specific medications, a high prevalence of inappropriate drug use was observed. The only associations with PIM use were the frailty status and in-hospital cognitive decline. Additional studies are needed to further evaluate this association.