937 resultados para TG-DTG
Resumo:
L’accumulation de triglycérides (TG) dans les hépatocytes est caractéristique de la stéatose hépatique non-alcoolique (SHNA). Cette dernière se produit dans diverses conditions dont le facteur commun est le métabolisme anormal des lipides. Le processus conduisant à l'accumulation des lipides dans le foie n’a pas encore été totalement élucidé. Toutefois, des lipides s'accumulent dans le foie lorsque les mécanismes qui favorisent leur exportation (oxydation et sécrétion) sont insuffisants par rapport aux mécanismes qui favorisent leur importation ou leur biosynthèse. De nos jours il est admis que la carence en œstrogènes est associée au développement de la stéatose hépatique. Bien que les résultats des études récentes révèlent l'implication des hormones ovariennes dans l'accumulation de lipides dans le foie, les mécanismes qui sous-tendent ce phénomène doivent encore être étudiés. En conséquence, les trois études présentées dans cette thèse ont été menées sur des rates ovariectomizées (Ovx), comme modèle animal de femmes post-ménopausées, pour étudier les effets du retrait des œstrogènes sur le métabolisme des lipides dans le foie, en considérant l'entraînement physique comme étant un élément positif pouvant contrecarrer ces effets. Il a été démontré que l'entraînement physique peut réduire l'accumulation de graisses dans le foie chez les rates Ovx. Dans la première étude, nous avons montré que chez les rates Ovx nourries à la diète riche en lipides (HF), les contenus de TG hépatiques étaient élevées (P < 0.01) comparativement aux rates Sham, 5 semaines après la chirurgie. Le changement de la diète HF par la diète standard (SD) chez les rates Sham a diminué l’accumulation de lipides dans le foie. Toutefois, chez les rates Ovx, 8 semaines après le changement de la HF par la SD le niveau de TG dans le foie était maintenu aussi élevé que chez les rates nourries continuellement avec la diète HF. Lorsque les TG hépatiques mesurés à la 13e semaine ont été comparés aux valeurs correspondant au retrait initial de la diète HF effectué à la 5e semaine, les niveaux de TG hépatiques chez les animaux Ovx ont été maintenus, indépendamment du changement du régime alimentaire; tandis que chez les rats Sham le passage à la SD a réduit (P < 0.05) les TG dans le foie. Les mêmes comparaisons avec la concentration des TG plasmatiques ont révélé une relation inverse. Ces résultats suggèrent que la résorption des lipides au foie est contrée par l'absence des œstrogènes. Dans cette continuité, nous avons utilisé une approche physiologique dans notre seconde étude pour investiguer la façon dont la carence en œstrogènes entraîne l’accumulation de graisses dans le foie, en nous focalisant sur la voie de l'exportation des lipides du foie. Les résultats de cette étude ont révélé que le retrait des œstrogènes a entraîné une augmentation (P < 0.01) de l’accumulation de lipides dans le foie en concomitance avec la baisse (P < 0.01) de production de VLDL-TG et une réduction l'ARNm et de la teneur en protéines microsomales de transfert des triglycérides (MTP). Tous ces effets ont été corrigés par la supplémentation en œstrogènes chez les rates Ovx. En outre, l'entraînement physique chez les rates Ovx a entraîné une réduction (P < 0.01) de l’accumulation de lipides dans le foie ainsi qu’une diminution (P < 0.01) de production de VLDL-TG accompagnée de celle de l'expression des gènes MTP et DGAT-2 (diacylglycérol acyltransférase-2). Des études récentes suggèrent que le peptide natriurétique auriculaire (ANP) devrait être au centre des intérêts des recherches sur les métabolismes énergétiques et lipidiques. Le ANP est relâché dans le plasma par les cellules cardiaques lorsque stimulée par l’oxytocine et exerce ses fonctions en se liant à son récepteur, le guanylyl cyclase-A (GC-A). En conséquence, dans la troisième étude, nous avons étudié les effets du blocage du système ocytocine-peptide natriurétique auriculaire (OT-ANP) en utilisant un antagoniste de l’ocytocine (OTA), sur l'expression des gènes guanylyl cyclase-A et certains marqueurs de l’inflammation dans le foie de rates Ovx. Nous avons observé une diminution (P < 0.05) de l’ARNm de la GC-A chez les rates Ovx et Sham sédentaires traitées avec l’OTA, tandis qu’une augmentation (P < 0.05) de l'expression de l’ARNm de la protéine C-réactive (CRP) hépatique a été notée chez ces animaux. L’exercice physique n'a apporté aucun changement sur l'expression hépatique de ces gènes que ce soit chez les rates Ovx ou Sham traitées avec l’OTA. En résumé, pour expliquer l’observation selon laquelle l’accumulation et la résorption de lipides dans le foie dépendent des mécanismes associés à des niveaux d’œstrogènes, nos résultats suggèrent que la diminution de production de VLDL-TG induite par une déficience en œstrogènes, pourrait être un des mecanismes responsables de l’accumulation de lipides dans le foie. L’exercice physique quant à lui diminue l'infiltration de lipides dans le foie ainsi que la production de VLDL-TG indépendamment des niveaux d'œstrogènes. En outre, l'expression des récepteurs de l’ANP a diminué par l'OTA chez les rates Ovx et Sham suggérant une action indirecte de l’ocytocine (OT) au niveau du foie indépendamment de la présence ou non des estrogènes. L’axe ocytocine-peptide natriurétique auriculaire, dans des conditions physiologiques normales, protègerait le foie contre l'inflammation à travers la modulation de l’expression de la GC-A.
Resumo:
The structural and thermal properties of three different dental composite resins, Filtek (TM) Supreme XT, Filtek (TM) Z-250 and TPHA (R)(3) were investigated in this study. The internal structures of uncured and cured resins with blue light-emitting diodes (LEDs) were examined by Micro-Raman spectroscopy. Thermal analysis techniques as DSC, TG and DTG methods were used to investigate the temperature characteristics, as glass transition (T (g) ), degradation, and the thermal stability of the resins. The results showed that the TPHA (R)(3) and Filtek (TM) Supreme XT presented very similar T (g) values, 48 and 50A degrees C, respectively, while the Filtek (TM) Z-250 composite resin presented a higher one, 58A degrees C. AFM microscope was utilized in order to analyze the sample morphologies, which possess different fillers. The composed resin Filtek (TM) Z-250 has a well interconnected more homogeneous morphology, suggesting a better degree of conversion correlated to the glass phase transition temperature. The modes of vibration of interest in the resin were investigated using Raman spectroscopy. It was possible to observe the bands representative for the C=C (1630 cm(-1)) and C=O(1700 cm(-1)) vibrations were studied with respect to their compositions and polymerization. It was observed that the Filtek (TM) Z -250 resin presents the best result related to the thermal properties and polymerization after light curing among the other resins.
Resumo:
The development and study of detectors sensitive to flammable combustible and toxic gases at low cost is a crucial technology challenge to enable marketable versions to the market in general. Solid state sensors are attractive for commercial purposes by the strength and lifetime, because it isn t consumed in the reaction with the gas. In parallel, the use of synthesis techniques more viable for the applicability on an industrial scale are more attractive to produce commercial products. In this context ceramics with spinel structure were obtained by microwave-assisted combustion for application to flammable fuel gas detectors. Additionally, alternatives organic-reducers were employed to study the influence of those in the synthesis process and the differences in performance and properties of the powders obtained. The organic- reducers were characterized by Thermogravimetry (TG) and Derivative Thermogravimetry (DTG). After synthesis, the samples were heat treated and characterized by Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), analysis by specific area by BET Method and Scanning Electron Microscopy (SEM). Quantification of phases and structural parameters were carried through Rietveld method. The methodology was effective to obtain Ni-Mn mixed oxides. The fuels influenced in obtaining spinel phase and morphology of the samples, however samples calcined at 950 °C there is just the spinel phase in the material regardless of the organic-reducer. Therefore, differences in performance are expected in technological applications when sample equal in phase but with different morphologies are tested
Resumo:
This master thesis aims at developing a new methodology for thermochemical degradation of dry coconut fiber (dp = 0.25mm) using laboratory rotating cylinder reactor with the goal of producing bio-oil. The biomass was characterized by infrared spectroscopy with Fourier transform FTIR, thermogravimetric analysis TG, with evaluation of activation energy the in non-isothermal regime with heating rates of 5 and 10 °C/min, differential themogravimetric analysis DTG, sweeping electron microscopy SEM, higher heating value - HHV, immediate analysis such as evaluated all the amounts of its main constituents, i.e., lignin, cellulose and hemicelluloses. In the process, it was evaluated: reaction temperature (450, 500 and 550oC), carrier gas flow rate (50 and 100 cm³/min) and spin speed (20 and 25 Hz) to condensate the bio-oil. The feed rate of biomass (540 g/h), the rotation of the rotating cylinder (33.7 rpm) and reaction time (30 33 min) were constant. The phases obtained from the process of pyrolysis of dry coconut fiber were bio-oil, char and the gas phase non-condensed. A macroscopic mass balance was applied based on the weight of each phase to evaluate their yield. The highest yield of 20% was obtained from the following conditions: temperature of 500oC, inert gas flow of 100 cm³/min and spin speed of 20 Hz. In that condition, the yield in char was 24.3%, non-condensable gas phase was 37.6% and losses of approximately 22.6%. The following physicochemical properties: density, viscosity, pH, higher heating value, char content, FTIR and CHN analysis were evaluated. The sample obtained in the best operational condition was subjected to a qualitative chromatographic analysis aiming to know the constituents of the produced bio-oil, which were: phenol followed by sirigol, acetovanilona and vinyl guaiacol. The solid phase (char) was characterized through an immediate analysis (evaluation of moisture, volatiles, ashes and fixed carbon), higher heating value and FTIR. The non-condensing gas phase presented as main constituents CO2, CO and H2. The results were compared to the ones mentioned by the literature.
Resumo:
The possibility of thermal treatment plants of municipal wastewater is an alternative solution for the final disposition of the sludge produced on small cities as Barueri, a small town of São Paulo State, Brazil. Combustion and pyrolysis of that municipal waste, occurring respectively in air and nitrogen, have been studied by thermogravimetry (TG) and differential thermal analysis (DTA). The main steps of each case were analyzed and Kissinger plots were used to estimate respective activation energies. DTG peaks are more indicated to represent the condition of maximum reaction rates than DTA peaks.
Resumo:
Retinoic acid (RA) and hydroquinone (HQ) assets are widely used in pharmaceutical and cosmetic formulations, for having depigmenting properties and are largely produced in drugstores. To assist in the development of formulations containing the active RA and HQ National Forms of Brazilian Pharmacopoeia (2005 and 2012 ) proposes formulations with different excipients such as cetyl alcohol (AC), cetostearyl alcohol (ACT), methylparaben (MTP), propyl paraben ( PPB), glycerin (GLY), dipropylene glycol (DPG), imidazolidinil urea ( IMD ), cyclomethicone (CCM ), butylated hydroxytoluene (BHT), octyl stearate (ETO), EDTA, decil oleate (ODC) and hydroxipropymethyl celullose (HPMC). One of the difficulties found in most cosmetic formulations is the large number of incompatibilities between the components of the formulations, so the aim this study was to evaluate thermal stability and interactions between these active pharmaceutical ingredients and excipients. The depigmenting agents were analyzed by DSC and TG and excipients were analyzed by TG. The dynamic thermogravimetric curves were obtained on a SHIMADZU thermobalance, model DTG-60, using an alumina crucible, at the heating rate of 10ºC min-1, in the temperature range of 25-900 ºC, under an atmosphere of nitrogen at 50 mL min-1. The DSC curves were obtained using Shimadzu calorimeter, model DSC-60, using aluminum crucible, at the heating rate of 10ºC min-1, in the temperature range of 25-400ºC. The thermogravimetric and calorimetric curves were analyzed using TASYS software SHIMADZU. In this study no were found interactions between AR and the following excipients: MTP, PPB, IMD, ODC, EDTA, CCM, ETO, HPMC. However, were found interactions with the following excipients: AC, ACT, BHT, GLI and DPG. For HQ were found interactions with IMD and DPG. Interactions remained even changing proportions of the mixtures and the ternary. Thus, the studies conducted with excipients of National Formulary from 2005 and 2012 showed that these new excipients do not interact by thermogravimetry with the active pharmaceutical ingredients of this study
Resumo:
Chitin and chitosan are nontoxic, biodegradable and biocompatible polymers produced by renewable natural sources with applications in diverse areas such as: agriculture, textile, pharmaceutical, cosmetics and biomaterials, such as gels, films and other polymeric membranes. Both have attracted greater interest of scientists and researchers as functional polymeric materials. In this context, the objective of this study was to take advantage of the waste of shrimp (Litopenaeus vannamei and Aristeus antennatus) and crabs (Ucides cordatus) from fairs, beach huts and restaurant in Natal/RN for the extraction of chitin and chitosan for the production of membranes by electrospinning process. The extraction was made through demineralization, deproteinization, deodorization and deacetylation. Morphological analyzes (SEM and XRD), Thermal analysis (TG and DTG), Spectroscopy in the Region of the Infrared with Transformed of Fourier (FTIR) analysis Calorimetry Differential Scanning (DSC) and mechanical tests for traction were performed. In (XRD) the semicrystalline structure of chitosan can be verified while the chitin had higher crystallinity. In the thermal analysis showed a dehydration process followed by decomposition, with similar behavior of carbonized material. Chitosan showed temperature of maximum degradation lower than chitin. In the analysis by Differential Scanning Calorimetry (DSC) the curves were coherent to the thermal events of the chitosan membranes. The results obtained with (DD) for chitosan extracted from Litopenaeus vannamei and Aristeus antennatus shrimp were (80.36 and 71.00%) and Ucides cordatus crabs was 74.65%. It can be observed that, with 70:30 solutions (v/v) (TFA/DCM), 60 and 90% CH3COOH, occurred better facilitate the formation of membranes, while 100:00 (v/v) (TFA/DCM) had formation of agglomerates. In relation to the monofilaments diameters of the chitosan membranes, it was noted that the capillary-collector distance of 10 cm and tensions of 25 and 30 kV contributed to the reduction of the diameters of membranes. It was found that the Young s modulus decreases with increasing concentration of chitosan in the membranes. 90% CH3COOH contributed to the increase in the deformation resulting in more flexible material. The membranes with 5% chitosan 70:30 (v/v) (TFA/DCM) had higher tensile strength
Resumo:
Sweeteners provide a pleasant sensation of sweetness that helps the sensory quality of the human diet, can be divided into natural sweeteners such as fructose, galactose, glucose, lactose and sucrose, and articial sweeteners such as aspartame, cyclamate and saccharin. This work aimed to study the thermal stability of natural and artificial sweeteners in atmospheres of nitrogen and syntetic air using thermogravimetry (TG), derivative thermogravimetry (DTG), Differential Thermal Analysis (DTA) and Differential Scanning Calorimetry (DSC). Among the natural sweeteners analyzed showed higher thermal stability for the lactose and sucrose, which showed initial decomposition temperatures near 220 ° C, taking advantage of the lactose has a higher melting point (213 ° C) compared to sucrose (191 ° C). The lower thermal stability was observed for fructose, it has the lowest melting point (122 °C) and the lower initial decomposition temperature (170 °C). Of the artificial sweeteners studied showed higher thermal stability for sodium saccharin, which had the highest melting point (364 ° C) as well as the largest initial decomposition temperature (466 ° C under nitrogen and 435 ° C in air). The lower thermal stability was observed for aspartame, which showed lower initial decomposition temperature (158 ° C under nitrogen and 170 ° C under air). For commercial sweeteners showed higher thermal stability for the sweeteners L and C, which showed initial temperature of thermal decomposition near 220 ° C and melting points near 215 ° C. The lower thermal stability was observed for the sweetener P, which showed initial decomposition temperature at 160 ° C and melting point of 130 °C. Sweeteners B, D, E, I, J, N and O had low thermal stability, with the initial temperature of decomposition starts near 160 °C, probably due to the presence of aspartame, even if they have as the main constituent of the lactose, wich is the most stable of natural sweeteners. According to the results we could also realize that all commercial sweeteners are in its composition by at least a natural sweeteners and are always found in large proportions, and lactose is the main constituent of 60% of the total recorded
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
The jeriva is a well-known fruit, which belongs to the Arecaceae family, Syagrus romanzoffiana species frequently found in Brazil. Extraction of the jeriva oil was carried out, and the fatty acid profile of this oil indicates the linoleic and oleic acid presence, around 29.35 and 28.89%, respectively. Thermogravimetry (TG), derivative thermogravimetry (DTG), and differential scanning calorimetry (DSC) were used to characterize this oil. Additionally, this oil was evaluated by DSC from 25 to -80 A degrees C, and the crystallization behavior was verified. Details concerning the thermal behavior as well as data of kinetic parameters of these stages have been described here. The obtained data were evaluated, and the values were plotted in activation energy (E (a)/kJ mol(-1)) in function of the conversion degree (alpha).
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Foram preparados os ditizonatos de Hg (I), Ag (I) e Bi (III). Termogravimetria (TG), termogravimetria derivada (DTG), calorimetria exploratória diferencial (DSC), difratometria de raios X pelo método do pó e análise elementar foram usados para caracterizar e para estudar a estabilidade térmica e a decomposição térmica da ditizona e destes ditizonatos.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)