Periprosthetic fracture torque for short versus standard cemented hip stems : an experimental in vitro study

In an attempt to preserve proximal femoral bone stock and achieve a better fit in smaller femora, especially in the Asian population, several new shorter stem designs have become available. We investigated the torque to periprosthetic femoral fracture of the Exeter short stem compared with the conventional length Exeter stem in a Sawbone model. 42 stems; 21 shorter and 21 conventional stems both with three different offsets were cemented in a composite Sawbone model and torqued to fracture. Results showed that Sawbone femurs break at a statistically significantly lower torque to failure with a shorter compared to conventional length Exeter stem of the same offset. Both standard and short stem designs are safe to use as the torque to failure is 7-10 times that seen in activities of daily living.

Commissioning of a new commercial plastic scintillator system for radiotherapy

Introduction Since 1992 there have been several articles published on research on plastic scintillators for use in radiotherapy. Plastic scintillators are said to be tissue equivalent, temperature independent and dose rate independent [1]. Although their properties were found to be promising for measurements in megavoltage X-ray beams there were some technical difficulties with regards to its commercialisation. Standard Imaging has produced the first commercial system which is now available for use in a clinical setting. The Exradin W1 scintillator device uses a dual fibre system where one fibre is connected to the Plastic Scintillator and the other fibre only measures Cerenkov radiation [2]. This paper presents results obtained during commissioning of this dosimeter system. Methods All tests were performed on a Novalis Tx linear accelerator equipped with a 6 MV SRS photon beam and conventional 6 and 18 MV X-ray beams. The following measurements were performed in a Virtual Water phantom at a depth of dose maximum. Linearity: The dose delivered was varied between 0.2 and 3.0 Gy for the same field conditions. Dose rate dependence: For this test the repetition rate of the linac was varied between 100 and 1,000 MU/min. A nominal dose of 1.0 Gy was delivered for each rate. Reproducibility: A total of five irradiations for the same setup. Results The W1 detector gave a highly linear relationship between dose and the number of Monitor Units delivered for a 10 9 10 cm2 field size at a SSD of 100 cm. The linearity was within 1 % for the high dose end and about 2 % for the very low dose end. For the dose rate dependence, the dose measured as a function of repetition the rate (100–1,000 MU/min) gave a maximum deviation of 0.9 %. The reproducibility was found to be better than 0.5 %. Discussion and conclusions The results for this system look promising so far being a new dosimetry system available for clinical use. However, further investigation is needed to produce a full characterisation prior to use in megavoltage X-ray beams.

Measuring multidisciplinary team effectiveness in a ward-based healthcare setting : development of the Team Functioning Assessment Tool

Nontechnical skills relating to team functioning are vital to the effective delivery of patient care and safety. In this study, we develop a reliable behavioral marker tool for assessing nontechnical skills that are critical to the success of ward-based multidisciplinary healthcare teams. The Team Functioning Assessment Tool (TFAT) was developed and refined using a literature review, focus groups, card-sorting exercise, field observations, and final questionnaire evaluation and refinement process. Results demonstrated that Clinical Planning, Executive Tasks, and Team Relations are important facets of effective multidisciplinary healthcare team functioning. The TFAT was also shown to yield acceptable inter-rater agreement.

Radiographer commenting of trauma radiographs : a survey of the benefits, barriers and enablers to participation in an Australian healthcare setting

Introduction Radiographer abnormality detection systems that highlight abnormalities on trauma radiographs (‘red dot’ system) have been operating for more than 30 years. Recently, a number of pitfalls have been identified. These limitations initiated the evolution of a radiographer commenting system, whereby a radiographer provides a brief description of abnormalities identified in emergency healthcare settings. This study investigated radiographers' participation in abnormality detection systems, their perceptions of benefits, barriers and enablers to radiographer commenting, and perceptions of potential radiographer image interpretation services for emergency settings. Methods A cross-sectional survey was implemented. Participants included radiographers from four metropolitan hospitals in Queensland, Australia. Conventional descriptive statistics, histograms and thematic analysis were undertaken. Results Seventy-three surveys were completed and included in the analysis (68% response rate); 30 (41%) of respondents reported participating in abnormality detection in 20% or less of examinations, and 26(36%) reported participating in 80% or more of examinations. Five overarching perceived benefits of radiographer commenting were identified: assisting multidisciplinary teams, patient care, radiographer ability, professional benefits and quality of imaging. Frequently reported perceived barriers included ‘difficulty accessing image interpretation education’, ‘lack of time’ and ‘low confidence in interpreting radiographs’. Perceived enablers included ‘access to image interpretation education’ and ‘support from radiologist colleagues’. Conclusions A range of factors are likely to contribute to the successful implementation of radiographer commenting in addition to abnormality detection in emergency settings. Effective image interpretation education amenable to completion by radiographers would likely prove valuable in preparing radiographers for participation in abnormality detection and commenting systems in emergency settings.

A protocol for a pragmatic randomized controlled trial evaluating outcomes of emergency nurse practitioner service

Aim To evaluate emergency nurse practitioner service effectiveness on outcomes related to quality of care and service responsiveness. Background Increasing service pressures in the emergency setting have resulted in the adoption of service innovation models; the most common and rapidly expanding of these is the emergency nurse practitioner. The delivery of high quality patient care in the emergency department is one of the most important service indicators to be measured in health services today. The rapid uptake of emergency nurse practitioner service in Australia has outpaced the capacity to evaluate this model in outcomes related to safety and quality of patient care. Design Pragmatic randomized controlled trial at one site with 260 participants. Methods This protocol describes a definitive prospective randomized controlled trial, which will examine the impact of emergency nurse practitioner service on key patient care and service indicators. The study control will be standard emergency department care. The intervention will be emergency nurse practitioner service. The primary outcome measure is pain score reduction and time to analgesia. Secondary outcome measures are waiting time, number of patients who did not wait, length of stay in the emergency department and representations within 48 hours. Discussion Scant research enquiry evaluating emergency nurse practitioner service on patient effectiveness and service responsiveness exists currently. This study is a unique trial that will test the effectiveness of the emergency nurse practitioner service on patients who present to the emergency department with pain. The research will provide an opportunity to further evaluate emergency nurse practitioner models of care and build research capacity into the workforce.

Setting aside default judgment - whether applicant must file affidavit providing direct evidence of defence 'on the merits'

In Prus-Butwilowicz v Moxey [2002] QDC 166 the court examined the question whether an applicant for an order setting aside a default judgment was required to file an affidavit providing direct evidence of a defence 'on the merits' and whether the position had changed under the Uniform Civil Procedure Rules 1999 (Qld).

Efficient extension of standard Schnorr/RSA signatures into Universal Designated-Verifier Signatures

Universal Designated-Verifier Signature (UDVS) schemes are digital signature schemes with additional functionality which allows any holder of a signature to designate the signature to any desired designated-verifier such that the designated-verifier can verify that the message was signed by the signer, but is unable to convince anyone else of this fact. Since UDVS schemes reduce to standard signatures when no verifier designation is performed, it is natural to ask how to extend the classical Schnorr or RSA signature schemes into UDVS schemes, so that the existing key generation and signing implementation infrastructure for these schemes can be used without modification. We show how this can be efficiently achieved, and provide proofs of security for our schemes in the random oracle model.

Plasma nanoscience : setting directions, tackling grand challenges

This review paper presents historical perspectives, recent advances and future directions in the multidisciplinary research field of plasma nanoscience. The current status and future challenges are presented using a three-dimensional framework. The first and the largest dimension covers the most important classes of nanoscale objects (nanostructures, nanofeatures and nanoassemblies/nanoarchitectures) and materials systems, namely carbon nanotubes, nanofibres, graphene, graphene nanoribbons, graphene nanoflakes, nanodiamond and related carbon-based nanostructures; metal, silicon and other inorganic nanoparticles and nanostructures; soft organic nanomaterials; nano-biomaterials; biological objects and nanoscale plasma etching. In the second dimension, we discuss the most common types of plasmas and plasma reactors used in nanoscale plasma synthesis and processing. These include low-temperature non-equilibrium plasmas at low and high pressures, thermal plasmas, high-pressure microplasmas, plasmas in liquids and plasma–liquid interactions, high-energy-density plasmas, and ionized physical vapour deposition as well as some other plasma-enhanced nanofabrication techniques. In the third dimension, we outline some of the 'Grand Science Challenges' and 'Grand Socio-economic Challenges' to which significant contributions from plasma nanoscience-related research can be expected in the near future. The urgent need for a stronger focus on practical, outcome-oriented research to tackle the grand challenges is emphasized and concisely formulated as from controlled complexity to practical simplicity in solving grand challenges.

Lattice-based threshold-changeability for standard CRT secret-sharing schemes

We consider the problem of increasing the threshold parameter of a secret-sharing scheme after the setup (share distribution) phase, without further communication between the dealer and the shareholders. Previous solutions to this problem require one to start off with a non-standard scheme designed specifically for this purpose, or to have secure channels between shareholders. In contrast, we show how to increase the threshold parameter of the standard CRT secret-sharing scheme without secure channels between the shareholders. Our method can thus be applied to existing CRT schemes even if they were set up without consideration to future threshold increases. Our method is a positive cryptographic application for lattice reduction algorithms, and we also use techniques from lattice theory (geometry of numbers) to prove statements about the correctness and information-theoretic security of our constructions.

Lattice-based threshold-changeability for standard Shamir secret-sharing schemes

We consider the problem of increasing the threshold parameter of a secret-sharing scheme after the setup (share distribution) phase, without further communication between the dealer and the shareholders. Previous solutions to this problem require one to start off with a non-standard scheme designed specifically for this purpose, or to have communication between shareholders. In contrast, we show how to increase the threshold parameter of the standard Shamir secret-sharing scheme without communication between the shareholders. Our technique can thus be applied to existing Shamir schemes even if they were set up without consideration to future threshold increases. Our method is a new positive cryptographic application for lattice reduction algorithms, inspired by recent work on lattice-based list decoding of Reed-Solomon codes with noise bounded in the Lee norm. We use fundamental results from the theory of lattices (Geometry of Numbers) to prove quantitative statements about the information-theoretic security of our construction. These lattice-based security proof techniques may be of independent interest.

Setting the research agenda in IHRM

Firstly, on behalf of the secretariat that has coordinated these meetings every two years since 1985, our thanks to the organising committee here at the University of Economics in Cracow, Poland, for hosting this conference. I was asked to offer comment on the research agenda. There are many famous names to refer to. Two Australian colleagues here today are Peter Dowling and Helen De Cieri, longtime stalwarts of the field of IHRM. I acknowledge their contributions over many years, along with Randy Schuler and Denise Welch, and Dennis Briscoe. Other names such as Rosalie Tung, Pawan Bhudwhar, Michael Morley, Paul Sparrow and Wayne Cascio are known to us all. Their books have become classics. One example is the 700 page benchmark 2012 work by Chris Brewster and Wolfgang Mayrhofer, Handbook of Research on Comparative Human Resource Management (Brewster & Mayrhofer, 2012). More recently, in a book published by Cambridge University press in 2014, Mustafa Özbilgin, Dimitria Groutsis and William Harvey offer students a very accessible overview of the basics in IHRM (Ozbilgin, Groutsis, & Harvey, 2014). As for a research agenda, there are excellent literature reviews to which I would refer you, such as those by people who over the years have been frequent participants at this conference (Tarique & Schuler, 2010), (Farndale, Scullion, & Sparrow, 2010), and (Scullion & Collings, 2011).

An application of the Driver Behaviour Questionnaire in a large Australian organisational fleeting setting : can it predict crashes and demerit point loss?

This study reports on the utilisation of the Manchester Driver Behaviour Questionnaire (DBQ) to examine the self-reported driving behaviours of a large sample of Australian fleet drivers (N = 3414). Surveys were completed by employees before they commenced a one day safety workshop intervention. Factor analysis techniques identified a three factor solution similar to previous research, which was comprised of: (a) errors, (b) highway-code violations and (c) aggressive driving violations. Two items traditionally related with highway-code violations were found to be associated with aggressive driving behaviours among the current sample. Multivariate analyses revealed that exposure to the road, errors and self-reported offences predicted crashes at work in the last 12 months, while gender, highway violations and crashes predicted offences incurred while at work. Importantly, those who received more fines at work were at an increased risk of crashing the work vehicle. However, overall, the DBQ demonstrated limited efficacy at predicting these two outcomes. This paper outlines the major findings of the study in regards to identifying and predicting aberrant driving behaviours and also highlights implications regarding the future utilisation of the DBQ within fleet settings.

Alignment and differences between the Australian Water Accounting Standard and the Water Accounting Framework for the Minerals Industry

In 2012, the Bureau of Meteorology under the banner of the Water Accounting Standards Board released the Australian Water Accounting Standard 1 (AWAS 1). This standard has been in development since 2007 with key milestones being the release of the Preliminary Australian Water Accounting Standard in 2009, and the exposure draft of the Australian Water Accounting Standard in 2010. Throughout this period, the Minerals Council of Australia’s Water Accounting Framework has developed concurrently with the Australian standards and the standards have informed elements of the framework. However, the framework is not identical to the standard as the objectives between the two are different. The objective of the Water Accounting Framework is to create consistency in water reporting of the minerals industry and to assist companies reporting to corporate sustainability initiatives. The objective of AWAS 1 is to provide information to water management bodies to facilitate decisions about the allocation of water resources. Companies are to report on an annual basis, not only physical flows of water but contractual requirements to supply and obtain water, regardless of whether the transaction has been fulfilled in the reporting period. In contrast, the Water Accounting Framework only reports on flows that have physically happened. The paper will provide summary information on aspects of AWAS 1 that are most relevant to the minerals industry, show the alignment and differences between AWAS 1 and the Water Accounting Framework and explain how to obtain the information for the AWAS 1 reporting statements.

Herpes simplex 2 risk among women in a polygynous setting in rural West Africa

OBJECTIVES: To determine risk factors for herpes simplex 2 (HSV2) infection in women in a polygynous rural Gambian population. METHODS: Data from women who participated in a cross-sectional survey of reproductive health were matched to their own and, for women who had been or were married (ever-married), their spouses' data collected in a cross-sectional survey of fertility interests, including information on marital histories. RESULTS: Data were available on 150 never-married and 525 ever-married women. HSV2 prevalence was 16% amongst never-married women and 36% amongst ever-married women. For ever-married women, their own personal characteristics (age, ethnicity and genital cutting status) and events from their husbands' marriage history were important determinants of HSV2 infection. Women whose husbands married for the first time over age 35 were at greater risk than women whose husbands married by age 24 [odds ratio (OR) 2.72, 95% confidence interval (CI) 1.20-6.10]. Women whose husband reported interest in a new marriage were more likely to be HSV2 positive (OR 1.91, 95% CI 1.18-3.09). Women whose husbands were currently monogamous but had had previous marriages (OR 2.76, 95% CI 1.30-5.88) and women in currently polygynous marriages (OR 2.88, 95% CI 1.66-5.01) were three times as likely to be HSV2 positive as women who were their husband's only wife ever. CONCLUSION: Much transmission of HSV2 in this setting occurs within marriage where opportunity for personal protection is limited. High levels of transmission within marriage may undermine the impact of sexual behaviour change programmes aiming to reduce HSV2 and HIV incidence and complicate their evaluation.