Lattice-based Encryption Over Standard Lattices in Hardware

Lattice-based cryptography has gained credence recently as a replacement for current public-key cryptosystems, due to its quantum-resilience, versatility, and relatively low key sizes. To date, encryption based on the learning with errors (LWE) problem has only been investigated from an ideal lattice standpoint, due to its computation and size efficiencies. However, a thorough investigation of standard lattices in practice has yet to be considered. Standard lattices may be preferred to ideal lattices due to their stronger security assumptions and less restrictive parameter selection process. In this paper, an area-optimised hardware architecture of a standard lattice-based cryptographic scheme is proposed. The design is implemented on a FPGA and it is found that both encryption and decryption fit comfortably on a Spartan-6 FPGA. This is the first hardware architecture for standard lattice-based cryptography reported in the literature to date, and thus is a benchmark for future implementations.
Additionally, a revised discrete Gaussian sampler is proposed which is the fastest of its type to date, and also is the first to investigate the cost savings of implementing with lamda_2-bits of precision. Performance results are promising in comparison to the hardware designs of the equivalent ring-LWE scheme, which in addition to providing a stronger security proof; generate 1272 encryptions per second and 4395 decryptions per second.

Multi-standard reconfigurable wireless transmitter architectures

The continuous demand for highly efficient wireless transmitter systems has triggered an increased interest in switching mode techniques to handle the required power amplification. The RF carrier amplitude-burst transmitter, i.e. a wireless transmitter chain where a phase-modulated carrier is modulated in amplitude in an on-off mode, according to some prescribed envelope-to-time conversion, such as pulse-width or sigma-delta modulation, constitutes a promising architecture capable of efficiently transmitting signals of highly demanding complex modulation schemes. However, the tested practical implementations present results that are way behind the theoretically advanced promises (perfect linearity and efficiency). My original contribution to knowledge presented in this thesis is the first thorough study and model of the power efficiency and linearity characteristics that can be actually achieved with this architecture. The analysis starts with a brief revision of the theoretical idealized behavior of these switched-mode amplifier systems, followed by the study of the many sources of impairments that appear when the real system is implemented. In particular, a special attention is paid to the dynamic load modulation caused by the often ignored interaction between the narrowband signal reconstruction filter and the usual single-ended switched-mode power amplifier, which, among many other performance impairments, forces a two transistor implementation. The performance of this architecture is clearly explained based on the presented theory, which is supported by simulations and corresponding measured results of a fully working implementation. The drawn conclusions allow the development of a set of design rules for future improvements, one of which is proposed and verified in this thesis. It suggests a significant modification to this traditional architecture, where now the phase modulated carrier is always on – and thus allowing a single transistor implementation – and the amplitude is impressed into the carrier phase according to a bi-phase code.

Teachers’ reflections on non standard students work

One of the tasks of teaching (Ball, Thames, & Phelps, 2008) concerns the work of interpreting student error and evaluating alternative algorithms used by students. Teachers’ abilities to understand nonstandard student work affects their instructional decisions, the explanations they provide in the classroom, the way they guide their students, and how they conduct mathematical discussions. However, their knowledge or their perceptions of the knowledge may not correspond to the actual level of knowledge that will support flexibility and fluency in a mathematics classroom. In this paper, we focus on Norwegian and Portuguese teachers’ reflections when trying to give sense to students’ use of nonstandard subtraction algorithms and of the mathematics imbedded in such. By discussing teachers’ mathematical knowledge associated with these situations and revealed in their reflections, we can perceive the difficulties teachers have in making sense of students’ solutions that differ from those most commonly reached.

Stable standard essential for prosperity. Speech in the Senate of the United States, February 4, 1878

This speech was given when the United States Senate was considering a bill to authorize the free coinage of the standard silver dollar and to restore its legal tender character. Mr. Bayard argues against the bill in this speech. He is interrupted during his speech multiple times and questioned about his points.

Compact tunable bandstop filters using defected microstrip structure for multi-standard wireless systems

A novel compact tunable bandstop filter using Defected Microstrip Structure (DMS) is presented in this paper. The structure utilizes a modified T shaped DMS which helps in miniaturization of the filter. To verify the concept, one such filter was simulated, designed, fabricated and tested. Measurements on a fabricated tunable filter confirm the accuracy of the design procedure. The tuning range of 20% is achieved, ranging from 2.26 GHz to 2.747 GHz. Tuning is achieved by using NXP BB179 varactor diode. A nonlinear distortion evaluation in a tunable filter was experimentally verified. Experimental verification shows the filter is highly linear.

Churchill as Chancellor of the Exchequer (1924–9) and the return to the gold standard

The general election of 29 October 1924 saw Winston Churchill return to Parliament as Constitutionalist MP for Epping after two years in the political wilderness. It also saw Stanley Baldwin swept back to Number 10 on a Conservative landslide. Speculation about whether Baldwin would cement Churchill’s drift from the Liberal fold by offering him office surfaced during the election campaign. Churchill nevertheless thought ‘it very unlikely that I shall be invited to join the Government, as owing to the size of the majority it will probably be composed only of impeccable Conservatives’. [ 1 ] Because of his anti-socialist credentials, his ability to reassure wavering Liberals through his opposition to protectionism – dropped by Baldwin after its rejection in the 1923 general election – and concern he could prove a rallying point for backbench malcontents, there was however much to commend giving Churchill a post. To his surprise, Baldwin offered Churchill the long-coveted office of Chancellor of the Exchequer, briefly held by his father before his ill-conceived resignation in 1887. Having arranged a meeting with his Labour predecessor, Philip Snowden, about outstanding business the new Chancellor set to work. Marking his political transition, a few days later Churchill resigned from the National Liberal Club.

Winston Churchill as Chancellor of the Exchequer (1924-9) and the Return to the Gold Standard

This revisits Churchill's decision, as Chancellor of the Exchequer 1924-29, to restore the Gold Standard in 1925. This is considered within the wider context of the overall aims of Churchill's policies, including his efforts to: tackle Anglo-American economic and financial relations in the aftermath of the Great War; address budgetary pressures; widen the tax base through innovations such as the Betting Duty; spread the social burden of taxes; and revive the economy, not least through his de-rating scheme.

Translation and Psychometric Evaluation of a Standard Chinese Version of the Body Appreciation Scale-2

The present study examined the factorial and construct validity of a Standard Chinese translation of the Body Appreciation Scale (BAS-2; Tylka & Wood-Barcalow, 2015b). Participants were 191 women and 154 men from mainland China who were resident in Hong Kong at the time of recruitment. Results of confirmatory factor analysis indicated that the one-dimensional model of the BAS-2, in which all 10 items loaded onto the same factor, had adequate fit and was invariant across sex. Body appreciation scores had good internal consistency and were significantly correlated with self-esteem and life satisfaction, and, in women, with weight discrepancy and body mass index. There were no significant differences in body appreciation scores between women and men. The present findings suggest that the Standard Chinese translation of the BAS-2 has the same one-dimensional factor structure as its parent scale and may facilitate cross-cultural studies of positive body image.

Strength prediction of single- and double-lap joints by standard and extended finite element modelling

The structural integrity of multi-component structures is usually determined by the strength and durability of their unions. Adhesive bonding is often chosen over welding, riveting and bolting, due to the reduction of stress concentrations, reduced weight penalty and easy manufacturing, amongst other issues. In the past decades, the Finite Element Method (FEM) has been used for the simulation and strength prediction of bonded structures, by strength of materials or fracture mechanics-based criteria. Cohesive-zone models (CZMs) have already proved to be an effective tool in modelling damage growth, surpassing a few limitations of the aforementioned techniques. Despite this fact, they still suffer from the restriction of damage growth only at predefined growth paths. The eXtended Finite Element Method (XFEM) is a recent improvement of the FEM, developed to allow the growth of discontinuities within bulk solids along an arbitrary path, by enriching degrees of freedom with special displacement functions, thus overcoming the main restriction of CZMs. These two techniques were tested to simulate adhesively bonded single- and double-lap joints. The comparative evaluation of the two methods showed their capabilities and/or limitations for this specific purpose.

The effect of method, standard and sample components on the total antioxidant capacity of commercial waters assessed by optical conventional assays

The total antioxidant capacity (TAC) of 28 flavoured water samples was assessed by ferric reducing antioxidant potential (FRAP), oxygen radical absorbance capacity (ORAC), trolox equivalent antioxidant capacity (TEAC) and total reactive antioxidant potential (TRAP) methods. It was observed that flavoured waters had higher antioxidant activity than the corresponding natural ones. The observed differences were attributed to flavours, juice and vitamins. Generally, higher TAC contents were obtained on lemon waters and lower values on guava and raspberry flavoured waters. Lower and higher TACs were obtained by TRAP and ORAC method, respectively. Statistical analysis suggested that vitamins and flavours increased the antioxidant content of the commercial waters.

Standard commercial education robotic platform: intermediate solution to teaching robotics

Teaching robotics to students at the beginning of their studies has become a huge challenge. Simulation environments can be an effective solution to that challenge where students can interact with simulated robots and have the first contact with robotic constraints. From our previous experience with simulation environments it was possible to observe that students with lower background knowledge in robotics where able to deal with a limited number of constraints, implement a simulated robotic platform and study several sensors. The question is: after this first phase what should be the best approach? Should the student start developing their own hardware? Hardware development is a very important part of an engineer's education but it can also be a difficult phase that could lead to discouragement and loss of motivation in some students. Considering the previous constraints and first year engineering students’ high abandonment rate it is important to develop teaching strategies to deal with this problem in a feasible way. The solution that we propose is the integration of a low-cost standard robotic platform WowWee Rovio as an intermediate solution between the simulation phase and the stage where the students can develop their own robots. This approach will allow the students to keep working in robotic areas such as: cooperative behaviour, perception, navigation and data fusion. The propose approach proved to be a motivation step not only for the students but also for the teachers. Students and teachers were able to reach an agreement between the level of demand imposed by the teachers and satisfaction/motivation of the students.

Octopus Standard Automated Perimetry, Pulsar Perimetry, Moorfields Motion Displacement Test and Heidelberg Retinal Tomography in Glaucoma Detection - A Comparison of Diagnostic Accuracy

Purpose: To investigate the accuracy of 4 clinical instruments in the detection of glaucomatous damage. Methods: 102 eyes of 55 test subjects (Age mean = 66.5yrs, range = [39; 89]) underwent Heidelberg Retinal Tomography (HRTIII), (disc area<2.43); and standard automated perimetry (SAP) using Octopus (Dynamic); Pulsar (TOP); and Moorfields Motion Displacement Test (MDT) (ESTA strategy). Eyes were separated into three groups 1) Healthy (H): IOP<21mmHg and healthy discs (clinical examination), 39 subjects, 78 eyes; 2) Glaucoma suspect (GS): Suspicious discs (clinical examination), 12 subjects, 15 eyes; 3) Glaucoma (G): progressive structural or functional loss, 14 subjects, 20 eyes. Clinical diagnostic precision was examined using the cut-off associated with the p<5% normative limit of MD (Octopus/Pulsar), PTD (MDT) and MRA (HRT) analysis. The sensitivity, specificity and accuracy were calculated for each instrument. Results: See table Conclusions: Despite the advantage of defining glaucoma suspects using clinical optic disc examination, the HRT did not yield significantly higher accuracy than functional measures. HRT, MDT and Octopus SAP yielded higher accuracy than Pulsar perimetry, although results did not reach statistical significance. Further studies are required to investigate the structure-function correlations between these instruments.

Armourstone revetments : will standard design criteria prevent failure? /

Bank stabilization structures are used to prevent the loss of valuable land within the urban environment and the decision for the type of structure used depends on the properties of the stream. In the urban areas of Southern Ontario there is a preference for the use of armourstone blocks as bank stabilization. The armourstone revetment is a free standing stone structure with large blocks of stone layered vertically and offset from one another. During fieldwork at Forty Mile Creek in Grimsby, Ontario armourstone failure was identified by the removal of two stones within one column from the wall. Since the footer stones were still in place, toe scour was eliminated as a cause of failure. Through theoretical, field, and experimental work the process of suction has been identified as a mode of failure for the armourstone wall and the process of suction works similarly to quarrying large blocks of rock off bedrock streambeds. The theory of lateral suction has previously not been taken into consideration for the design of these walls. The physical and hydraulic evidence found in the field and studied during experimental work indicate that the armourstone wall is vulnerable to the process of suction. The forces exerted by the flow and the resistance of the block determine the stability of the armourstone block within the wall. The design of the armourstone wall, high surface velocities, and short pulses of faster flowing water within the profile could contribute to armourstone failure by providing the forces needed for suction to occur, therefore adjustments to the design of the wall should be made in order to limit the effect.