InterInterpretação das lesões ortopédicas dos ocupantes dos veículos na reconstrução forense dos acidentes de viação

Road Traffic accidents are the leading cause of violent death and a major cause of death and sequelae in young and economically active population in developed and developing countries. Numbers that can only be compared to wars, which exemplifies the consequences of these lesions in economic and social terms. In 2002, about 1.2 million people died in traffic accidents, and in 2020, it is estimated that this number will double according to the World Health Organization (WHO). Only a small percentage of these are generated by vehicle faults or adverse conditions. The vast majority of accidents are caused by carelessness, negligence or malpractice of drivers or pedestrians, which makes the reconstruction of accidents a key step in the investigation and prevention of further accidents.

Driver Aggression as a Function of Status Concurrence: An Analysis of Horn-Honking Responses

Various field experiments were conducted to examine the influence of social status on aggression in road traffic. Horn-honking response times of subjects blocked by an experimental car at traffic lights were considered to be an indicator of the degree of aggression. During an initial experiment, the status of the frustrator was varied and an inverse relation was observed between status and aggression towards the frustrator. On the other hand, in a more recent experiment higher status aggressors were found to behave more aggressively. In our study we combined the two designs, i.e., we varied the status of the frustrator and at the same time measured the status of the aggressor. Neither results of the former experiments could be replicated, but we observed a reduction in aggression when frustrator and aggressor were of similar social status.

Acoustical and emission characteristics of small, high-speed internal combustion engines. Final report.

National Highway Traffic Safety Administration, Office of Research and Development, Washington, D.C.

Evaluation of ARMCO sound barriers on two bridges on I-495. Final report.

Virginia Department of Highways and Transportation, Richmond

Data base for light-weight automotive power plants - Volume I: executive summary. Final report.

National Highway Traffic Safety Administration, Office of Passenger Vehicle Research, Washington, D.C.

Life cycle costs of quieter truck tires. Final report.

Transportation Department, Office of Noise Abatement, Washington, D.C.

Data base for light-weight automotive diesel power plants - Volume II: discussion and results. Final report.

National Highway Traffic Safety Administration, Office of Passenger Vehicle Research, Washington, D.C.

Data base for light-weight automotive diesel power plants - Volume III: miscellaneous data. Final report.

National Highway Traffic Safety Administration, Office of Passenger Vehicle Research, Washington, D.C.

Workshop on ride quality, 1976. Proceedings and findings. Summary report.

Transportation Department, Washington, D.C.

Acute alcohol consumption and mechanism of injury

Objective: The purpose of this study was to determine whether injury mechanism among injured patients is differentially distributed as a function of acute alcohol consumption (quantity, type, and drinking setting). Method: A cross-sectional study was conducted between October 2000 and October 2001 in the Gold Coast Hospital Emergency Department, Queensland, Australia. Data were collected quarterly over a 12-month period. Every injured patient who presented to the emergency department during the study period for treatment of an injury sustained less than 24 hours prior to presentation was approached for interview. The final sample comprised 593 injured patients (males = 377). Three measures of alcohol consumption in the 6 hours prior to injury were obtained from self-report: quantity, beverage type, and drinking setting. The main outcome measure was mechanism of injury which was categorized into six groups: road traffic crash (RTC), being hit by or against something, fall, cut/piercing, overdose/poisoning, and miscellaneous. Injury intent was also measured (intentional vs unintentional). Results: After controlling for relevant confounding variables, neither quantity nor type of alcohol was significantly associated with injury mechanism. However, drinking setting (i.e., licensed premise) was significantly associated with increased odds of sustaining an intentional versus unintentional injury (odds ratio [OR] = 2.79, 95% confidence interval [CI] = 1.4-5.6); injury through being hit by/against something versus other injury types (OR = 2.59, 95% CI = 1.4-4.9); and reduced odds of sustaining an injury through RTC versus non-RTC (OR = 0.02, 95% CI = 0.004-0.9), compared with not drinking alcohol prior to injury. Conclusions: No previous analytical studies have examined the relationship between injury mechanism and acute alcohol consumption (quantity, type, and setting) across all types of injury and all injury severities while controlling for potentially important confounders (demographic and situational confounders, risk-taking behavior, substance use, and usual drinking patterns). These data suggest that among injured patients, mechanism of injury is not differentially distributed as a function of quantity or type of acute alcohol consumption but may be differentially distributed as a function of drinking setting (i.e., RTC, intentional injury, being hit). Therefore, prevention strategies that focus primarily on the quantity and type of alcohol consumed should be directed generically across injury mechanisms and not limited to particular cause of injury campaigns.

Does anticipation training affect drivers' risk taking?

Skill and risk taking are argued to be independent and to require different remedial programs. However, it is possible to contend that skill-based training could be associated with an increase, a decrease, or no change in fisk-taking behavior. In 3 experiments, the authors examined the influence of a skill-based training program (hazard perception) on the fisk-taking behavior of car drivers (using video-based driving simulations). Experiment 1 demonstrated a decrease in risk taking for novice drivers. In Experiment 2, the authors examined the possibilities that the skills training might operate through either a nonspecific reduction in risk taking or a specific improvement in hazard perception. Evidence supported the latter. These findings were replicated in a more ecological context in Experiment 3, which compared advanced and nonadvanced police drivers.

Measuring the global burden of disease and epidemiological transitions: 2002-2030

Any planning process for health development ought to be based on a thorough understanding of the health needs of the population. This should be sufficiently comprehensive to include the causes of premature death and of disability, as well as the major risk factors that underlie disease and injury. To be truly useful to inform health-policy debates, such an assessment is needed across a large number of diseases, injuries and risk factors, in order to guide prioritization. The results of the original Global Burden of Disease Study and, particularly, those of its 2000-2002 update provide a conceptual and methodological framework to quantify and compare the health of populations using a summary measure of both mortality and disability: the disability-adjusted life-year (DALY). Globally, it appears that about 5 6 million deaths occur each year, 10. 5 million (almost all in poor countries) in children. Of the child deaths, about one-fifth result from perinatal causes such as birth asphyxia and birth trauma, and only slightly less from lower respiratory infections. Annually, diarrhoeal diseases kill over 1.5 million children, and malaria, measles and HIV/AIDS each claim between 500,000 and 800,000 children. HIV/AIDS is the fourth leading cause of death world-wide (2.9 million deaths) and the leading cause in Africa. The top three causes of death globally are ischaemic heart disease (7.2 million deaths), stroke (5.5 million) and lower respiratory diseases (3.9 million). Chronic obstructive lung diseases (COPD) cause almost as many deaths as HIV/AIDS (2.7 million). The leading causes of DALY, on the other hand, include causes that are common at young ages [perinatal conditions (7. 1 % of global DALY), lower respiratory infections (6.7%), and diarrhoeal diseases (4.7%)] as well as depression (4.1%). Ischaemic heart disease and stroke rank sixth and seventh, retrospectively, as causes of global disease burden, followed by road traffic accidents, malaria and tuberculosis. Projections to 2030 indicate that, although these major vascular diseases will remain leading causes of global disease burden, with HIV/AIDS the leading cause, diarrhoeal diseases and lower respiratory infections will be outranked by COPD, in part reflecting the projected increases in death and disability from tobacco use.

Efficiently computing weighted proximity relationships in spatial databases

Spatial data mining recently emerges from a number of real applications, such as real-estate marketing, urban planning, weather forecasting, medical image analysis, road traffic accident analysis, etc. It demands for efficient solutions for many new, expensive, and complicated problems. In this paper, we investigate the problem of evaluating the top k distinguished “features” for a “cluster” based on weighted proximity relationships between the cluster and features. We measure proximity in an average fashion to address possible nonuniform data distribution in a cluster. Combining a standard multi-step paradigm with new lower and upper proximity bounds, we presented an efficient algorithm to solve the problem. The algorithm is implemented in several different modes. Our experiment results not only give a comparison among them but also illustrate the efficiency of the algorithm.

Using process mapping and business process simulation to support a process-based approach to change in a public sector organisation

A case study demonstrates the use of a process-based approach to change regarding the implementation of an information system for road traffic accident reporting in a UK police force. The supporting tools of process mapping and business process simulation are used in the change process and assist in communicating the current process design and people's roles in the overall performance of that design. The simulation model is also used to predict the performance of new designs incorporating the use of information technology. The approach is seen to have a number of advantages in the context of a public sector organisation. These include the ability for personnel to move from a traditional grouping of staff in occupational groups with relationships defined by reporting requirements to a view of their role in a process, which delivers a performance to a customer. By running the simulation through time it is also possible to gauge how changes at an operational level can lead to the meeting of strategic targets over time. Also the ability of simulation to proof new designs was seen as particularly important in a government agency were past failures of information technology investments had contributed to a more risk averse approach to their implementation. © 2004 Elsevier Ltd. All rights reserved.

Modeling geometric rules in object based models:an XML / GML approach

Most object-based approaches to Geographical Information Systems (GIS) have concentrated on the representation of geometric properties of objects in terms of fixed geometry. In our road traffic marking application domain we have a requirement to represent the static locations of the road markings but also enforce the associated regulations, which are typically geometric in nature. For example a give way line of a pedestrian crossing in the UK must be within 1100-3000 mm of the edge of the crossing pattern. In previous studies of the application of spatial rules (often called 'business logic') in GIS emphasis has been placed on the representation of topological constraints and data integrity checks. There is very little GIS literature that describes models for geometric rules, although there are some examples in the Computer Aided Design (CAD) literature. This paper introduces some of the ideas from so called variational CAD models to the GIS application domain, and extends these using a Geography Markup Language (GML) based representation. In our application we have an additional requirement; the geometric rules are often changed and vary from country to country so should be represented in a flexible manner. In this paper we describe an elegant solution to the representation of geometric rules, such as requiring lines to be offset from other objects. The method uses a feature-property model embraced in GML 3.1 and extends the possible relationships in feature collections to permit the application of parameterized geometric constraints to sub features. We show the parametric rule model we have developed and discuss the advantage of using simple parametric expressions in the rule base. We discuss the possibilities and limitations of our approach and relate our data model to GML 3.1. © 2006 Springer-Verlag Berlin Heidelberg.