2D silhouette and 3D skeletal models for human detection and tracking

In this paper we propose a statistical model for detection and tracking of human silhouette and the corresponding 3D skeletal structure in gait sequences. We follow a point distribution model (PDM) approach using a Principal Component Analysis (PCA). The problem of non-lineal PCA is partially resolved by applying a different PDM depending of pose estimation; frontal, lateral and diagonal, estimated by Fisher's linear discriminant. Additionally, the fitting is carried out by selecting the closest allowable shape from the training set by means of a nearest neighbor classifier. To improve the performance of the model we develop a human gait analysis to take into account temporal dynamic to track the human body. The incorporation of temporal constraints on the model increase reliability and robustness.

Study of reliability of fibre Bragg grating fibre optic strain sensors for field-test applications

In this paper, the reliability and thus the suitability of optical fibre strain sensors for surface strain measurement in concrete structures was investigated. Two different configurations of optical strain sensors were used each having different mountings making them suitable for different uses in various structures. Due to the very limited time available to install the sensors and take result, commercially packaged sensors were used. In the tests carried out each sensor was mounted onto a concrete beam which was then subjected to a range of known and calibrated loadings. The performance of the optical strain sensors thus evaluated was compared with the results of conventional techniques. This comparison allows for selecting the best performing combination of sensor/mounting, i.e. long-gauge sensor with mounts bolted to threaded rods glued into the concrete for use in future work in a field test where a limited time window was available for installation, testing and post-test demounting. © 2012 Elsevier B.V.

Addressing the technical and market challenges to high wind power integration in Ireland

Over the last decade there has been a rapid global increase in wind power stimulated by energy and climate policies. However, as wind power is inherently variable and stochastic over a range of time scales, additional system balancing is required to ensure system reliability and stability. This paper reviews the technical, policy and market challenges to achieving ambitious wind power penetration targets in Ireland’s All-Island Grid and examines a number of measures proposed to address these challenges. Current government policy in Ireland is to address these challenges with additional grid reinforcement, interconnection and open-cycle gas plant. More recently smart grid combined with demand side management and electric vehicles have also been presented as options to mitigate the variability of wind power. In addition, the transmission system operators have developed wind farm specific grid codes requiring improved turbine controls and wind power forecasting techniques.

Efficient modelling and optimisation of hybrid multilayered plates subject to ballistic impact

Among the key challenges present in the modelling and optimisation of composite structures against impact is the computational expense involved in setting up accurate simulations of the impact event and then performing the iterations required to optimise the designs. It is of more interest to find good designs given the limitations of the resources and time available rather than the best possible design. In this paper, low cost but sufficiently accurate finite element (FE) models were generated in LS Dyna for several experimentally characterised materials by semi-automating the modelling process and using existing material models. These models were then used by an optimisation algorithm to generate new hybrid offspring, leading to minimum weight and/or cost designs from a selection of isotropic metals, polymers and orthotropic fibre-reinforced laminates that countered a specified impact threat. Experimental validation of the optimal designs thus identified was then successfully carried out using a single stage gas gun. With sufficient computational hardware, the techniques developed in this pilot study can further utilise fine meshes, equations of state and sophisticated material models, so that optimal hybrid systems can be identified from a wide range of materials, designs and threats.

The Temporal Focus Scale:Factor structure and association with alcohol use in a sample of Northern Irish school children

The Temporal Focus Scale (TFS) is a 12-item self-report measure of cognitive engagement with the temporal domains of past, present and future. Developed in college student samples, a three-factor structure with adequate reliability and validity was documented in a series of independent studies. We tested the factor structure of the scale in a sample of Northern Irish adolescents and found that our data supported a three factor structure, although there were problems with item 10. Because time perspective measures have been found to relate differentially to various health behaviours, we tested the relations between scores on the TFS and self-reported alcohol use. Results showed that scores on the TFS were not consistent statistical predictors of drinking category in a logistic regression. Results are discussed in terms of scale development, future scale use and the assessment of health-compromising behaviours such as adolescent alcohol consumption. © 2012 The Foundation for Professionals in Services for Adolescents.

Beaufort trout MicroPlex:A high-throughput multiplex platform comprising 38 informative microsatellite loci for use in resident and anadromous (sea trout) brown trout Salmo trutta genetic studies

A flexible panel consisting of 38 informative microsatellite markers for Salmo trutta is described. These markers were selected from a pool of over 150 candidate loci that can be readily amplified in four multiplex PCR groups but other permutations are also possible. The basic properties of each markers were assessed in six population samples from both the Burrishoole catchment, in the west of Ireland, and Lough Neagh, in Northern Ireland. A method to assess the relative utility of individual markers for the detection of population genetic structuring is also described. Given its flexibility, technical reliability and high degree of informativeness, the use of this panel of markers is advocated as a standard for S. trutta genetic studies. © 2013 The Authors. Journal of Fish Biology © 2013 The Fisheries Society of the British Isles.

Temper outbursts in Prader-Willi syndrome: causes, behavioural and emotional sequence and responses by carers

Background: Temper outbursts are common in Prader-Willi syndrome but rarely described in detail. This study investigated the phenomenology of temper outbursts in terms of antecedents, sequence of behaviours and emotions and intervention strategies used.

Method: A semi-structured interview about temper outbursts was conducted with the main carers of seven children (9.5 to 16.7 years) and seven adults (24.7 to 47.10 years) with Prader-Willi syndrome (10 male, 4 female). Reliability and validity of the interview results was established.

Results: Various setting events increased and reduced the likelihood of temper outbursts. The most common antecedent was a change to routine or expectation. There were marked similarities in the sequence of behaviours and emotions during temper outbursts, with anger rising quickly followed by expressions of remorse and distress at the end of an outburst.

Discussion: The sequence of behaviours and emotions within outbursts was similar to that described in temper tantrums in typical development. Cognitive and emotional processes are likely to be important in the understanding of temper outbursts with implications for early intervention.

A bridge-monitoring tool based on bridge and vehicle accelerations

Previous research on damage detection based on the response of a structure to a moving load has reported decay in accuracy with increasing load speed. Using a 3D vehicle – bridge interaction model, this paper shows that the area under the filtered acceleration response of the bridge increases with increasing damage, even at highway load speeds. Once a datum reading is established, the area under subsequent readings can be monitored and compared with the baseline reading, if an increase is observed it may indicate the presence of damage. The sensitivity of the proposed approach to road roughness and noise is tested in several damage scenarios. The possibility of identifying damage in the bridge by analysing the acceleration response of the vehicle traversing it is also investigated. While vehicle acceleration is shown to be more sensitive to road roughness and noise and therefore less reliable than direct bridge measurements, damage is successfully identified in favourable scenarios.

A methodological review of the Short Form Health Survey 36 (SF-36) and its derivatives among breast cancer survivors

Purpose: A systematic review of the validity, reliability and sensitivity of the Short Form (SF) health survey measures among breast cancer survivors.
Methods: We searched a number of databases for peer-reviewed papers. The methodological quality of the papers was assessed using the COnsenus-based Standards for the selection of health Measurement INstruments (COSMIN).
Results: The review identified seven papers that assessed the psychometric properties of the SF-36 (n = 5), partial SF-36 (n = 1) and SF-12 (n = 1) among breast cancer survivors. Internal consistency scores for the SF measures ranged from acceptable to good across a range of language and ethnic sub-groups. The SF-36 demonstrated good convergent validity with respective subscales of the Functional Assessment of Cancer Treatment—General scale and two lymphedema-specific measures. Divergent validity between the SF-36 and Lymph-ICF was modest. The SF-36 demonstrated good factor structure in the total breast cancer survivor study samples. However, the factor structure appeared to differ between specific language and ethnic sub-groups. The SF-36 discriminated between survivors who reported or did not report symptoms on the Breast Cancer Prevention Trial Symptom Checklist and SF-36 physical sub-scales, but not mental sub-scales, discriminated between survivors with or without lymphedema. Methodological quality scores varied between and within papers.
Conclusion: Short Form measures appear to provide a reliable and valid indication of general health status among breast cancer survivors though the limited data suggests that particular caution is required when interpreting scores provided by non-English language groups. Further research is required to test the sensitivity or responsiveness of the measure.

Application of Evidence Theory and Discounting Techniques to Aerospace Design

Critical decisions are made by decision-makers throughout
the life-cycle of large-scale projects. These decisions are crucial as they
have a direct impact upon the outcome and the success of projects. To aid
decision-makers in the decision making process we present an evidential
reasoning framework. This approach utilizes the Dezert-Smarandache
theory to fuse heterogeneous evidence sources that suffer from levels
of uncertainty, imprecision and conflicts to provide beliefs for decision
options. To analyze the impact of source reliability and priority upon
the decision making process, a reliability discounting technique and a
priority discounting technique, are applied. A maximal consistent subset
is constructed to aid in dening where discounting should be applied.
Application of the evidential reasoning framework is illustrated using a
case study based in the Aerospace domain.

Environmental Operations Management and its links with Proactivity and Performance: A study of the UK Food Industry

Two important strands of research within the literature on Environmental Operations Management (EOM) relate to environmental approach and performance. Often in this research the links between environmental approach, environmental performance and EOM are considered separately with little consideration given to the interrelationships between them. This study develops and tests a theoretical framework that combines these two strands to explore how UK food manufacturers approach EOM. The framework considers the relationships between an environmentally pro-active strategic orientation, EOM and environmental and cost performance. A cross-sectional survey was developed to collect data from a sample of 1200 food manufacturing firms located within the UK. Responses were sought from production and operations managers who are knowledgeable about the environmental operations practices within their firms. A total of 149 complete and useable responses were obtained. The reliability and validity of the scales used in the survey were tested using exploratory factor analysis, prior to the testing of the hypotheses underpinning the theoretical framework using hierarchical regression analysis. Our results generate support for a link between environmental proactivity, environmental practices and performance, consistent with the natural resource-based view (NRBV) and a number of studies in the extant literature. In considering environmental proactivity as a standalone concept that influences the implementation of environmental practices outlined in the NRBV, our study generates some novel insights into these links. Further our results provide some interesting insights for managers within the food industry who can identify the potential benefits of certain practices for performance within this unique context.

Dup discourses on violence and their impact on the northern ireland peace process

This paper analyses the Democratic Unionist Party's (DUP) discourses about paramilitary violence in Northern Ireland. Drawing on narrative analysis of DUP discourses reported in Northern Ireland's largest unionist newspaper, the News Letter (1998-2006), it explores the relationship between the party's identity, its discourses about republican and loyalist paramilitaries, and the impact of these words on the DUP's electoral success and on the peace process. The paper argues that these discourses may haunt the progress of peace-building, not least because the DUP will find it hard to disentangle itself from a history of scepticism and nay-saying even as it takes a leading role in a devolved Executive designed by an Agreement it longscorned.

“How Can a Woman Who Has Been Raped Be Believed?”: Andrea Dworkin, Sexual Violence and the Ethics of Belief

In June 2000, Andrea Dworkin, an American feminist activist and author, published an account of being raped in a Paris hotel room a year earlier. The story was met with widespread disbelief, including from feminist readers. This article explores the reasons for this disbelief, asking how and why narratives of rape are granted – or denied – truth status by their readers. The article argues for understanding the conferral of belief as a narrative transaction involving the actions of both narrator and reader. It posits that Dworkin was widely seen as an unreliable narrator but argues that for ideologically charged narratives such as rape narratives judgements of reliability and belief inevitably draw upon the normative standpoint of the reader. I suggest that there are opposing criteria for establishing the truth of rape narratives; a ‘factual’ or legal model, which sees rape narratives as requiring scrutiny, and an ‘experiential’ model, located within certain strands of feminist politics, which emphasises the ethical importance of believing women’s narratives. The article finishes with a consideration of the place of belief within an ethics of reading and reception of rape narratives.

Performance and Fault Tolerance of Preconditioned Iterative Solvers on Low-Power ARM Architectures

As the complexity of computing systems grows, reliability and energy are two crucial challenges asking for holistic solutions. In this paper, we investigate the interplay among concurrency, power dissipation, energy consumption and voltage-frequency scaling for a key numerical kernel for the solution of sparse linear systems. Concretely, we leverage a task-parallel implementation of the Conjugate Gradient method, equipped with an state-of-the-art pre-conditioner embedded in the ILUPACK software, and target a low-power multi core processor from ARM.In addition, we perform a theoretical analysis on the impact of a technique like Near Threshold Voltage Computing (NTVC) from the points of view of increased hardware concurrency and error rate.