Quality-of-Transmission-Aware Manycasting Over Optical Burst-Switched Networks

Many next-generation distributed applications, such as grid computing, require a single source to communicate with a group of destinations. Traditionally, such applications are implemented using multicast communication. A typical multicast session requires creating the shortest-path tree to a fixed number of destinations. The fundamental issue in multicasting data to a fixed set of destinations is receiver blocking. If one of the destinations is not reachable, the entire multicast request (say, grid task request) may fail. Manycasting is a generalized variation of multicasting that provides the freedom to choose the best subset of destinations from a larger set of candidate destinations. We propose an impairment-aware algorithm to provide manycasting service in the optical layer, specifically OBS. We compare the performance of our proposed manycasting algorithm with traditional multicasting and multicast with over provisioning. Our results show a significant improvement in the blocking probability by implementing optical-layer manycasting.

Providing quality of service via opportunistic splitting using stochastic approximation

We consider the problem of wireless channel allocation to multiple users. A slot is given to a user with a highest metric (e.g., channel gain) in that slot. The scheduler may not know the channel states of all the users at the beginning of each slot. In this scenario opportunistic splitting is an attractive solution. However this algorithm requires that the metrics of different users form independent, identically distributed (iid) sequences with same distribution and that their distribution and number be known to the scheduler. This limits the usefulness of opportunistic splitting. In this paper we develop a parametric version of this algorithm. The optimal parameters of the algorithm are learnt online through a stochastic approximation scheme. Our algorithm does not require the metrics of different users to have the same distribution. The statistics of these metrics and the number of users can be unknown and also vary with time. Each metric sequence can be Markov. We prove the convergence of the algorithm and show its utility by scheduling the channel to maximize its throughput while satisfying some fairness and/or quality of service constraints.

Multipath routing to provide quality of service in mobile ad hoc networks

Because of frequent topology changes and node failures, providing quality of service routing in mobile ad hoc networks becomes a very critical issue. The quality of service can be provided by routing the data along multiple paths. Such selection of multiple paths helps to improve reliability and load balancing, reduce delay introduced due to route rediscovery in presence of path failures. There are basically two issues in such a multipath routing Firstly, the sender node needs to obtain the exact topology information. Since the nodes are continuously roaming, obtaining the exact topology information is a tough task. Here, we propose an algorithm which constructs highly accurate network topology with minimum overhead. The second issue is that the paths in the path set should offer best reliability and network throughput. This is achieved in two ways 1) by choice of a proper metric which is a function of residual power, traffic load on the node and in the surrounding medium 2) by allowing the reliable links to be shared between different paths.

Evaluation of the Quality of Drinking Water in Kerala State, India

The quality of tap water from water supplies from 14 districts of Kerala state, India was studied. Parameters like pH, water temperature, total dissolved solids, salinity, nitrates, chloride, hardness, magnesium, calcium, sodium, potassium, fluoride, sulphate, phosphates, and coliform bacteria were enumerated. The results showed that all water samples were contaminated by coliform bacteria. About 20% of the tap water samples from Alappuzha and 15% samples from Palakkad district are above desirable limits prescribed by Bureau of Indian Standards. The contamination of the source water (due to lack of community hygiene) and insufficient treatment are the major cause for the coliform contamination in the state. Water samples from Alappuzha and Palakkad have high ionic and fluoride content which could be attributed to the geology of the region. Water supplied for drinking in rural areas are relatively free of any contamination than the water supplied in urban area by municipalities, which may be attributed higher chances of contamination in urban area due to mismanagement of solid and liquid wastes. The study highlights the need for regular bacteriological enumeration along with water quality in addition to setting up decentralised region specific improved treatment system.

Subchannel allocation and power control in femtocells to provide quality of service

Femtocells are a new concept which improves the coverage and capacity of a cellular system. We consider the problem of channel allocation and power control to different users within a Femtocell. Knowing the channels available, the channel states and the rate requirements of different users the Femtocell base station (FBS), allocates the channels to different users to satisfy their requirements. Also, the Femtocell should use minimal power so as to cause least interference to its neighboring Femtocells and outside users. We develop efficient, low complexity algorithms which can be used online by the Femtocell. The users may want to transmit data or voice. We compare our algorithms with the optimal solutions.

On the quality of hydrogenated amorphous silicon deposited by sputtering

Amorphous hydrogenated silicon (a-Si:H) is well-known material in the global semiconductor industry. The quality of the a-Si:H films is generally decided by silicon and hydrogen bonding configuration (Si-H-x, x=1,2) and hydrogen concentration (C-H). These quality aspects are correlated with the plasma parameters like ion density (N-i) and electron temperature (T-e) of DC, Pulsed DC (PDC) and RF plasmas during the sputter-deposition of a-Si:H thin films. It was found that the N-i and T-e play a major role in deciding Si-H-x bonding configuration and the C-H value in a-Si:H films. We observed a trend in the variation of Si-H and Si-H-2 bonding configurations, and C-H in the films deposited by DC, Pulsed DC and RF reactive sputtering techniques. Ion density and electron energy are higher in RF plasma followed by PDC and DC plasma. Electrons with two different energies were observed in all the plasmas. At a particular hydrogen partial pressure, RF deposited films have higher C-H followed by PDC and then DC deposited films. The maximum energy that can be acquired by the ions was found to be higher in RF plasma. Floating potential (V-f) is more negative in DC plasma, whereas, plasma potential (V-p) is found to be more positive in RF plasma. (C) 2014 Elsevier Ltd. All rights reserved.

Low Complexity Power and Scheduling Policies for Wireless Networks to Provide Quality of Service

We consider optimal power allocation policies for a single server, multiuser system. The power is consumed in transmission of data only. The transmission channel may experience multipath fading. We obtain very efficient, low computational complexity algorithms which minimize power and ensure stability of the data queues. We also obtain policies when the users may have mean delay constraints. If the power required is a linear function of rate then we exploit linearity and obtain linear programs with low complexity.

Extended ageing time and temperature effects on quality of sub-primal cuts of boxed beef

[EN]Most of the information indicating ageing improves tenderness has been collected on the loin and rib-eye muscles over relatively short ageing times, assuming that all muscles will react similarly. In the present study, the effect of extended ageing times on instrumental texture (56 d) and sensory characteristics (42 d) of six different beef sub-primals [striploin (SL), inside round (IR), outside round (OR), eye of round (ER), blade eye (BE) and chuck tender (CT)] was studied. The effects of two ageing temperatures (1and 58C) were also compared. In general, ageing increased tenderness (P<0.05) of SL, BE, ER and CT sub-primals, although BE shear force increased after 42 d of ageing. On the other hand, ageing had no effect on IR tenderness (P<0.05) and resulted in a decrease in tenderness of OR (P<0.05) until day 35, with a later increase after 42 d of ageing. Increasing ageing temperature (58C) had limited effect on tenderness, but ageing time and temperature increases led to lower flavour and higher off-flavour intensity (P<0.05) of the studied sub-primals. These results suggest that cutspecific maximum ageing times and rigid adherence to temperature maximums would be of benefit to optimize postslaughter processes and meat quality

Interim report on surface water resources and quality of waters in Lee County, Florida

Report seeks to address following questions: 1. Where within Lee County are surface supplies of water located? 2. What are the variations in this supply? 3. What can be done to provide better answers to questions 1 and 2 than are available at the present time? (PDF contains 76 pages.)

Evaluation of the quantity and quality of the water resources of Volusia County, Florida

This report amplifies and refines some of the data already issued covering the water resources of Volusia County, which were published as Report of Investigations No. 21. The work in the report was accomplished as a cooperative program between the Department of Natural Resources, the U. S. Geological Survey and the Board of County Commissioners of Volusia County. Volusia County is almost totally dependent upon the water which falls upon the county and has a recharge area contained along the western portion and the central portions of the county. Excellent water is produced in the areal recharge and it is anticipated that this data will expand the existing knowledge of the water resources to permit the development of a great capacity for existing utilities and to offset and solve some of the problems now in the area. (PDF has 71 pages.)

The impacts of leadership in the quality of municipal public services: case study of a portuguese municipal council

[EN]The present research work, based on some of the components of the Common Assessment Framework, sets to analyse the influence held by leadership in specific factors that constitute the organisational climate, and also the impact that these factors have on the quality of municipal public services. For the purposes of this study, we propose Likert’s exploitative autocratic and participative leadership styles to explain the genesis, structure and workflow. As far as the organisational climate is concerned, the variables used are motivation, satisfaction, empowerment, conflict and stress. The main conclusions that arose was that a participative leader confers higher relevance to the quality of service, through motivation, satisfaction, empowerment and human resources positive results, than an exploitative autocratic leader. Performed contributions are based on the empiric research hereby presented, and new research guidelines are proposed. The research methodology used was qualitative, based on the case study.

Multirating decision model validation: the relevance of the quality of the securitization issues

Rating enables the information asymmetry existing in the issuer-investor relationship to be reduced, particularly for issues with a high degree of complexity, as is the case of securitizations. However, there may be a serious conflict of interest between the issuer’s choice and remuneration of the agency and the credit rating awarded, resulting in lower quality and information power of the published rating. In this paper, we propose an explicative model of the number of ratings requested, by analyzing the relevance of the number of ratings to measure the reliability, where multirating is shown to be associated to the quality, size, liquidity and the degree of information asymmetry relating to the issue. Thus, we consider that the regulatory changes that foster the widespread publication of simultaneous ratings could help to alleviate the problem of rating model arbitrage and the crisis of confidence in credit ratings in general and in the securitization issues, in particular.

Improvement in the nutritive quality of soyabean meal by co-ensiling with under-utilized fish discards

Improvement in the nutritive value of soybean meal was investigated by Co-ensiling it with underutilized trash fish discards (gizzard shad)at different proportions. The following proportions of gizzard shad to soybean meal were used; (a) 100% gizzard shad + acid combination (b)80% gizzard shad +20% soybean meal & 10% WB (c) 60% gizzard shad + 40% soybean meal & 10% WB (d) 100% gizzard shad without acid combination. Co-ensiling was achieved by adding sufficient acid to produce a paste. Products were neutralized by addition of 2% (by weight) calcium hydroxide and drying was affected by freeze-drying.The dried silage products were stored at low temperatures. Products were analysed for proximate composition and amino acid composition.The amino acid composition and ration of essential amino acid. Non essential amino acid (EAA/NEAA) was used as index of nutritive quality. Also essential amino acid profile of the co-ensiled products were compared with essential amino acid requirement of some warmwater fish species to estimate their nutritive usefulness for these species

The effect of traditional handling, processing and storage methods on the quality of dried fish in small scale fisheries in Nigeria

Most of the fish marketed throughout Nigeria are in either smoked or dried form. The technological requirement for other forms of preservation like chilling and freezing cannot be afforded by the small scale fisher folk. Considerable quantities of fish processed for distant consumer markets are lost at handling, processing, storage and marketing stages. Significant losses occur through infestation by mites, insects, fungal infestation and fragmentation during transportation. This paper attempts to describe the effect of these losses on fish quality and suggests methods of protecting fish from agents of deterioration