Efeito do preparo do solo e resíduo da colheita de cana-de-açúcar sobre a emissão de CO2

The soil is one of the main C pools in terrestrial ecosystem, capable of storing significant C amounts. Therefore, understanding the factors that contribute to the loss of CO2 from agricultural soils is critical to determine strategies reducing emissions of this gas and help mitigate the greenhouse effect. The purpose of this study was to investigate the effect of soil tillage and sugarcane trash on CO2 emissions, temperature and soil moisture during sugarcane (re)planting, over a study period of 15 days. The following managements were evaluated: no-tillage with crop residues left on the soil surface (NTR); without tillage and without residue (NTNR) and tillage with no residue (TNR). The average soil CO2 emission (FCO2) was lowest in NTR (2.16 µmol m-2 s-1), compared to the managements NTNR (2.90 µmol m-2 s-1) and TNR (3.22 µmol m-2 s-1), indicating that the higher moisture and lower soil temperature variations observed in NTR were responsible for this decrease. During the study period, the lowest daily average FCO2 was recorded in NTR (1.28 µmol m-2 s-1), and the highest in TNR (6.08 µmol m-2 s-1), after rainfall. A loss of soil CO2 was lowest from the management NTR (367 kg ha-1 of CO2-C) and differing significantly (p<0.05) from the managements NTNR (502 kg ha-1 of CO2-C) and TNR (535 kg ha-1 of CO2-C). Soil moisture was the variable that differed most managements and was positively correlated (r = 0.55, p<0.05) with the temporal variations of CO2 emission from NTR and TNR. In addition, the soil temperature differed (p<0.05) only in management NTR (24 °C) compared to NTNR (26 °C) and TNR (26.5 °C), suggesting that under the conditions of this study, sugarcane trash left on the surface induced an average rise in the of soil temperature of 2 ºC.

Segurança no trabalho com agrotóxicos em citros: aplicação com o turbopulverizador e preparo de calda em tanque de 2.000 L

The objectives of this study were: a) to quantify dermal and respiratory exposure resulting from work conditions in the application of pesticides on citrus crops using a air-assisted sprayer and by preparing the spray in a tank with a capacity of2.000 L; b) to evaluate the measures of individual protection for these workers; c) to determine the areas of the worker's body most exposed; and d) to classify the work conditions with and without the protective measures tested, with regard to the occupational safety of the recommendations for the pesticides used in controlling the main pests and diseases of this crop. It was shown that for the tractor driver and sprayer operator applyng pesticides on citrus trees, the most efficient protective measures were the AZR ensemble and the Real cabin. The AZR ensemble was effective in controlling exposure of the spray preparer, because it was sufficient to turn work conditions from unsafe to safe. The area of the body most exposed under the two work conditions studied was the hands of the workers.

Polímeros impressos com íons: fundamentos, estratégias de preparo e aplicações em química analítica

Chemical imprinting technology has been widely used as a valuable tool in selective recognition of a given target analyte (molecule or metal ion), yielding a notable advance in the development of new analytical protocols. Since their discovery, molecularly imprinted polymers (MIPs) have been extensively studied with excellent reviews published. However, studies involving ion imprinted polymers (IIPs), in which metal ions are recognized in the presence of closely related inorganic ions, remain scarce. Thus, this review involved a survey of different synthetic approaches for preparing ion imprinted adsorbents and their application for the development of solid phase extraction methods, metal ion sensors (electrodes and optodes) and selective membranes.

Biodiesel de buriti em trator: desempenho em função do tipo de diesel e da proporção de mistura na operação de preparo do solo

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Componentes agronômicos e índices fisiológicos da mandioca correlacionados ao preparo do solo

Pós-graduação em Agronomia (Agricultura) - FCA

Preparo e aplicação de poliacrilamida molecularmente impressa como adsorvente de glifosato e AMPA

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Comportamento da cana-de-açúcar em duas safras e atributos físicos do solo, sob diferentes tipos de preparo

The tillage comprises on average 25% of the cost of deploying a reed, so this cost reduction measures are desirable since they do not compromise the quality of the operation and longevity of sugarcane. The objective was to evaluate the effect of different tillage systems in Acrustox, correlating soil physical properties and characteristics of sugarcane agroindustrial plant cane and ratoon cane. We used five types of soil tillage, over experimental design in blocks with five replications. The particle size was measured every 0.1 m to 0.4 m depth, through deformed soil samples collected at the end of the first growth cycle of the culture. For other soil physical properties: bulk density, total porosity and water content, assessments were performed at the end of each cycle, collecting soil samples in layers of 0-0.20 to 0.21-0.40 m, in addition to performing the penetration resistance, using a penetrometer impact. The response of sugarcane depending on the types of tillage was determined from the evaluation of productivity per hectare of stem (TCH), sugar (TPH), the values of pol % cane (AP), sugar total recoverable (ATR) and fiber samples collected at harvest stalk of sugarcane plant and ratoon cane. In the tillage studied, there was a change of the physical attributes of the soil, causing reduced productivity in 2009/2010 crop, compared with the 2008/2009 season. In tillage system of furrowing direct lowest result was observed for TCH, especially in 2009/2010 crop, when the difference with conventional tillage was 20.53 Mg ha(-1).

Avaliação da temperatura gerada e do tempo gasto durante o preparo do tecido ósseo com a utilização de brocas de diferentes sistemas de implantes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da infiltração marginal em restaurações de resinas compostas para dentes posteriores: efeito de material, preparo cavitário e condicionamento do esmalte a nível cervical

Pós-graduação em Odontologia Restauradora - ICT

Infiltração de água em um podzólico vermelho-escuro sob dois métodos de preparo, usando chuva simulada com duas intensidades

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desempenho de semeadora-adubadora em função do preparo de solo e espaçamento da cultura do milho

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Indicadores de produção científica na concepção teórica da indexação: uma análise bibliométrica do periódico The Indexer

In the context of university libraries, optimization services, streamlining processes and consistency of processing and organization of informational content are strongly influenced by the indexing policy adopted by the information system. This discussion has proposed to perform a theoretical and methodological research on the subject cataloging in order to contribute to the definition of indexing policy elements in medical university library. To achieve our objective, we applied three instruments: Organizational Culture, Individual Verbal Protocol and Evaluation of Indexing. Considers the importance of developing an indexing policy for improvements in processes and services offered by university libraries, as well as the retrieval.

Visibilidade dos pesquisadores no periódico Scientometrics a partir da perspectiva brasileira: um estudo de cocitação

This research aims at verifying the authors who have given basis to the brazilian researches internationally inserted in the area of Bibliometrics and Scientometrics through the analysis of citation and co-citation of the brazilian articles published in the journal Scientometrics. We used the Scopus data base, with the terms Scientometrics in source title and Brasil or Brazil in affiliation country. We found 53 articles, with 741 references and 19 authors cited 3 or more times. In general, the researchers come from the biologic and health areas. Using the Ucinet software, we build the co-citation network and calculated its indicators. We calculated the co-citation normalized index. The density and average of normalized degree centrality were 65,5%. We concluded the research highlighting the significant presence of brazilians (32%) and the dialogicity occurring between cited Brazilians and foreigners within a balance, where brazilians already dialog with renowned international researchers of the Bibliometrics and Scientometrics area.

As ações do PIBID Pedagogia e suas relações com o preparo prático para a docência nos anos iniciais do ensino fundamental

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência do uso de hipoclorito de sódio 2,5% e extrato glicólico de sálvia 20% durante o preparo biomecânico sobre a resistência adesiva de retentores intra- radiculares: avaliação através do teste de push-out

The aim of this study it was to evaluate the use of irrigating solution used during root canal preparation on the adhesive cementation of prefabricated fiberglass pins. The bond strength between different regions of the root and the fiberglass pins cemented into the root canal were evaluated by push-out assay. For this study, 36 human teeth were used, all equally prepared. The irrigating solutions used for biomechanical preparation were: saline solution, sodium hypochlorite 2,5% and glycolic extract of salvia 20%. The dual cure resin cement was used for cementation of pins. After cementation, specimens were sectioned to give 3 slices of approximately 2 mm each (cervical, middle and apical), which were submitted to mechanical push-out test. Were performed ANOVA and Tukey's test with a significance level of 5%, for the analysis of mechanical test. Comparing the thirds we observed that the only solution that presented statistical difference in the bond strength was sodium hypochlorite, which showed higher values for the middle and apical third compared with the cervical third, but when compared without taking into consideration the dental thirds, solutions studied showed no differences in bond strength. Therefore, it was concluded that the solutions studied can be used during endodontic treatment without causing harmful effects on the final adhesive restoration