Heterogeneidade espacial e variabilidade temporal de dois reservatórios com diferentes graus de trofia, no Estado de São Paulo

O entendimento da comunidade fitoplanctônica em sistemas instáveis, como por exemplo reservatórios, necessita conhecimento de escalas de variabilidade. Com base nisso, um estudo sobre a heterogeneidade espacial e variabilidade temporal de dois reservatórios com diferentes graus de trofia, no Estado de São Paulo foi realizado em 20 estações no reservatório de Salto Grande e em 19 no reservatório do Lobo, em 3 dias consecutivos, em quatro períodos: outubro de 1999, janeiro, abril e junho e julho de 2000. Para tanto foram determinadas as concentrações de nutrientes totais e dissolvidos, material em suspensão, carbono inorgânico, clorofila a, biomassa, densidade, composição e produtividade primária da comunidade fitoplanctônica e os perfis de oxigênio dissolvido, temperatura, pH e condutividade. Os dois reservatórios tiveram estruturas espaciais semelhantes com a formação de três zonas distintas. A zona de rio, misturada, com menor penetração de luz e maior concentração de nutrientes, a zona de transição, e a zona lacustre, mais estratificada, com maior penetração de luz e menor concentração de nutrientes. Apesar dessa compartimentalização a heterogeneidade espacial no reservatório de Salto Grande foi maior que no reservatório do Lobo, sobretudo em função do gradiente longitudinal de nutrientes e luz. A variabilidade diária (3 dias) nos dois reservatórios não foi significativa na determinação da comunidade fitoplanctônica. A escala de variabilidade sazonal, nos dois reservatórios, foi determinada, principalmente pela variação nos padrões de estratificação e mistura sendo, assim, determinante na composição da comunidade fitoplanctônica. Essa influência foi mais evidente no reservatório do Lobo. A variação temporal e heterogeneidade espacial das mais abundantes espécies e grupos taxonômicos da comunidade fitoplanctônica, (Microcystis aeruginosa, Anabaena crassa e Anabaena circinalis em Salto Grande e Aphanocapsa delicatissima, Coelastrum reticulatum e Aulacoseira granulata no Lobo) nos dois reservatórios foram determinados pelos complexos processos de estratificação e mistura e da disponibilidade de luz. Os resultados obtidos são importantes para o entendimento da variabilidade ambiental de reservatórios tropicais e no planejamento de amostragens que visem o gerenciamento desses sistemas.

Fotodegradação de antibióticos de nitrofurano em condições ambientais

Ao submeter uma solução aquosa de 5-nitro-2-furaldeído (NFA) a fotólise com impulsos de luz de curta duração (produzidos por um laser de estado sólido de Nd-YAG) origina-se uma absorvância (transiente) de curta duração que é atribuída à absorção de luz pelo NFA no estado tripleto mais baixo (3NFA*). O espectro desta absorção de luz apresenta um λmax = 475 ± 5 nm, que se mostrou ser insensível à polaridade do solvente. Em solução aquosa, a absorção do 3NFA* decai para uma absorção transiente de tempo de vida mais longo e que, medida em tempos diferentes (depois do fim do impulso), revelou ser devida a um radical furiloxilo (a de λmax ≈ 375 nm) e ao anião radical NFA•‒ (a de λmax ≈ 400 nm). Estes dois radicais foram gerados independentemente um do outro, o que permitiu confirmar a atribuição daquela absorção de longo tempo de vida (obtida na fotólise de NFA em água) aos radicais furiloxilo e anião radical do NFA. O tempo de vida (τ) do 3NFA* revelou uma dependência em relação à natureza do solvente e à concentração de NFA no estado fundamental. Da propensão do 3NFA* para abstrair um átomo de hidrogénio de solventes (com átomos de H abstraíveis) concluiu-se a natureza (n, π*) do estado tripleto de menor energia do NFA. A dependência de τ em relação à concentração de NFA (no estado fundamental) forneceu evidência cinética em favor da formação de um excímero tripleto que supostamente se dissocia em iões radicais (catião e anião) como é proposto no mecanismo de auto-supressão do 3NFA* por transferência de electrão. O efeito da acididade sobre τ corrobora o mecanismo de auto-supressão por transferência de electrão. A análise cromatográfica e espectroscópica da solução fotolisada de NFA em água permitiu identificar a 5-hidroximetileno-2(5H)-furanona, o ião nitrito e uma substância desconhecida de tR 3.69 minutos como os fotoprodutos maioritários. Apresenta-se evidência conclusiva de que a 5-hidroximetileno-2(5H)-furanona provém do radical furiloxilo. Mostra-se que a substância desconhecida também pode ser obtida na foto-redução de NFA em propan-2-ol e na redução química de NFA por Fe (s) em água (em ambas, conjuntamente com produção de 5-amino-2-furaldeído). Com base na análise por espectroscopia de absorção de RMN de 1H e de 13C (com 2-D HMQC) e vibracional por FT no infravermelho médio, discute-se a possível estrutura da substância de tR 3.69 minutos obtida como um produto da foto-redução de NFA em água. Experiências de sensibilização e supressão do 3NFA* permitiram obter a energia de excitação do estado tripleto como 238 ± 2 kJ mol-1 o que, conjuntamente com o potencial de redução monoelectrónica (E71) do NFA fornece E71 (3NFA* / NFA•‒) = 2.26 V vs. SHE para o potencial de redução monoelectrónica do 3NFA* em solução aquosa neutra. Mostra-se que os aniões inorgânicos (usados como nucleófilos) são mono-oxidados pelo 3NFA* (como é indicado pela observação de NFA•‒ e do radical inorgânico) com constantes de velocidade de segunda-ordem (

Pigmentos a base de Cobalto para aplicação em revestimentos cerâmicos

Ceramic pigments that own mainly the spinel structure AB2O4 are becoming a matter of great scientific and technological interest due to the ability of accommodate different cations in its structure, allowing different dopings and thus obtaining different colors. Studies on ceramic pigments currently are being directed to the development of stable and pigments obtained at low temperatures and with greater reproducibility. This work aims at the use of inorganic pigments for applications in ceramic tiles, investigating the influence of doping and calcination temperature on the coloring pigments and ceramic glazes. the based pigments of CoCr2O4, CoAl2O4, Co0,8Zn0,2Cr2O4 and Co0,8Zn0,2Al2O4 were synthesized by a chemical route using commercial gelatin as organic precursor. The materials were characterized by thermogravimetric analysis (TG), X-ray diffraction (XRD), infrared spectroscopy (FTIR) spectroscopy scanning electron microscopy (SEM) in the UVVisible region and colorimetry. The results confirmed the feasibility of synthesis used, the route presented pigments crystal structures and the desired phases were obtained from 500 °C with increased crystallinity and the crystallite size. The pigments have hues ranging from green to violet according to their doping and calcination temperatures.

Micropartículas de quitosana estruturadas com aerosil®: estabilidade, adsorção, encapsulação e liberação de substâncias ativas

Biodegradable microspheres used as controlled release systems are important in pharmaceutics. Chitosan biopolymer represents an attractive biomaterial alternative because of its physicochemical and biological characteristics. Chitosan microspheres are expected to become promising carrier systems for drug and vaccine delivery, especially for non-invasive ways oral, mucosal and transdermal routes. Controlling the swelling rate and swelling capacity of the hydrogel and improving the fragile nature of microspheres under acidic conditions are the key challenges that need to be overcomed in order to enable the exploration of the full pharmaceutical potential use of these microparticles. Many studies have focused on the modification of chitosan microsphere structures with cross-linkers, various polymers blends and new organic-inorganic hybrid systems in order to obtain improved properties. In this work, microspheres made of chitosan and nanosized hydrophobic silica (Aerosil R972) were produced by a method consisting of two steps. First, a preparation of a macroscopically homogeneous chitosan-hydrophobic silica dispersion was prepared followed by spray drying. FTIR spectroscopy, X-ray powder diffraction, differential scanning calorimetry, thermal gravimetric analysis, scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (TEM) were used to characterize the microspheres. Also, the were conducted acid stability, moisture sorption capacity, release properties and biological assays. The chitosan-hydrophobic silica composite microspheres showed improved thermal degradation, lower water affinity, better acid stability and ability to retard rifampicin and propranolol hydrochloride (drug models) release under simulated physiological conditions. In vitro biocompatibility studies indicated low cytotoxicity and low capacity to activate cell production of the pro-inflammatory mediator nitric oxide. The results show here encourage further studies on the use of the new chitosan-hydrophobic silica composite microspheres as drug carrier systems via oral or nasal routes.

Síntese e caracterização de pigmentos nanométricos encapsulados pelos métodos dos precursores poliméricos, hidrotermal de microondas e co-precipitação associado à química sol-gel convencional

The demand for materials with high consistency obtained at relatively low temperatures has been leveraging the search for chemical processes substituents of the conventional ceramic method. This paper aims to obtain nanosized pigments encapsulated (core-shell) the basis of TiO2 doped with transition metals (Fe, Co, Ni, Al) through three (3) methods of synthesis: polymeric precursors (Pechini); hydrothermal microwave, and co-precipitation associated with the sol-gel chemistry. The study was motivated by the simplicity, speed and low power consumption characteristic of these methods. Systems costs are affordable because they allow achieving good control of microstructure, combined with high purity, controlled stoichiometric phases and allowing to obtain particles of nanometer size. The physical, chemical, morphological, structural and optical properties of the materials obtained were analyzed using different techniques for materials characterization. The powder pigments were tested in discoloration and degradation using a photoreactor through the solution of Remazol yellow dye gold (NNI), such as filtration, resulting in a separation of solution and the filter pigments available for further UV-Vis measurements . Different calcination temperatures taken after obtaining the post, the different methods were: 400 º C and 1000 º C. Using a fixed concentration of 10% (Fe, Al, Ni, Co) mass relative to the mass of titanium technologically and economically enabling the study. By transmission electron microscopy (TEM) technique was possible to analyze and confirm the structural formation nanosized particles of encapsulated pigment, TiO2 having the diameter of 20 nm to 100 nm, and thickness of coated layer of Fe, Ni and Co between 2 nm and 10 nm. The method of synthesis more efficient has been studied in the work co-precipitation associated with sol-gel chemistry, in which the best results were achieved without the need for the obtainment of powders the calcination process

Extração, caracterização e avaliação bioativa do extrato de Arrabidaea chica

The use of plants for medicinal purposes is ancient, with widespread application in medicinal drugs. Although plants are promising sources for the discovery of new molecules of pharmacological interest, estimates show that only 17% of them have been studied for their possible use in medicine. Thus, biodiversity of Brazilian flora represents an immense potential for economic use by the pharmaceutical industry. The plant Arrabidaea chica, popularly known as “pariri”, is common in the Amazon region, and it is assigned several medicinal properties. The leaves of this plant are rich in anthocyanins, which are phenolic compounds with high antioxidant power. Antioxidant compounds play a vital role in the prevention of neurological and cardiovascular diseases, cancer and diabetes, among others. Within the anthocyanins found in Arrabidaea chica, stands out Carajurin (6,7-dihydroxy-5,4’- dimethoxy-flavilium), which is the major pigment encountered in this plant. The present work aimed to study on supercritical extraction and conventional extraction (solid-liquid extraction) in leaves of Arrabidaea chica, evaluating the efficiency of the extractive processes, antioxidant activity and quantification of Carajurin contained in the extracts. Supercritical extraction used CO2 as solvent with addition of co-solvent (ethanol/water mixture) and were conducted by the dynamic method in a fixed bed extractor. The trials followed a 24-1 fractional factorial design, the dependent variables were: process yield, concentration of Carajurin and antioxidant activity; and independent variables were: pressure, temperature, concentration of co-solvent (v/v) and concentration of water in the co-solvent mixture (v/v). Yields (mass of dry extract/mass of raw material used) obtained from supercritical extraction ranged from 15.1% to 32%, and the best result was obtained at 250 bar and 40 °C, co-solvent concentration equal to 30% and concentration of water in the co-solvent mixture equal to 50%. Through statistical analysis, it was found that the concentration of co-solvent revealed significant effect on the yield. Yields obtained from conventional extractions were of 8.1% (water) and 5.5% (ethanol). Through HPLC (High-performance liquid chromatography) analysis, Carajurin was quantified in all the extracts and concentration values (Carajurin mass/mass of dry extract) ranged between 1% and 2.21% for supercritical extraction. For conventional extraction, Carajurin was not detected in the aqueous extract, while the ethanol extract showed Carajurin content of 7.04%, and therefore, more selective in Carajurin than the supercritical extraction. Evaluation of antioxidant power (radical 2,2-diphenyl-1-picrylhydrazyl – DPPH – sequestration method) of the supercritical extracts resulted in EC50 values (effective concentration which neutralizes 50% of free radicals) ranged from 38.34 to 86.13 μg/mL, while conventional extraction resulted in EC50 values of 167.34 (water) and 42.58 (ethanol) μg/mL. As for the quantification of total phenolic content (Folin-Ciocalteau analysis) of the supercritical extracts resulted in values ranged from 48.93 and 88.62 mg GAE/g extract (GAE = Gallic Acid Equivalents), while solid-liquid extraction resulted in values of 37.63 (water) and 80.54 (ethanol) mg GAE/g extract. The good antioxidant activity cannot be attributed solely to the presence of Carajurin, but also the existence of other compounds and antioxidants in Arrabidaea chica. By optimizing the experimental design, it was possible to identify the experiment that presented the best result considering the four dependent variables together. This experiment was performed under the following conditions: pressure of 200 bar, temperature of 40 °C, co-solvent concentration equal to 30% and concentration of water in the co-solvent mixture equal to 30%. It is concluded that, within the studied range, it is possible to purchase the optimum result using milder operating conditions, which implies lower costs and greater ease of operation.

Materiais bionanocompósitos a base de argilominerais e hidróxidos duplos lamelares como sistemas de liberação de fármacos

Bionanocomposites systems clay base (montmorillonite and sepiolite), layered double hidroxides and biopolymers (carboxymethylcellulose and zein) were evaluated as topical delivery systems with antibacterial activity and as oral delivery systems. For this study, neomycin, a topical antibiotic, indicated mainly for open wound infections. The drug amoxicillin, an antibiotic indicated mainly for throat infections, were also used in this study. Both antibiotics were used as model drugs. Initially, drugs were incorporated directly into the biopolymer matrix, comprising the combination of carboxymethylcellulos and zein, being conformed as movies and balls and evaluated for their antibacterial activity and controlled release simulating gastrointestinal fluids. Moreover, hybrids materials have been prepared where the neomycin drug was incorporated into the lamellar inorganic solids, such as montmorillonite by ion exchange reaction, and the fibrous type, such as sepiolite by adsorption in aqueous solution. But the drug amoxicillin was incorporated into layered double hydroxides by anion exchange and montmorillonite by cation exchange. The resulting hybrids were in turn combined with the biopolymer matrix yielding bionanocomposites shaped materials such as films were tested for their antibacterial activity, and the shaped materials beads were tested for their release in the gastrointestinal fluids. Through the analysis of various physico-chemical techniques, we observed the interactions between the studied materials, the formation of hybrids materials, obtaining the bionanocomposites materials and material efficiency when applied in controlled release of drugs both topical and use oral mainly influenced by the presence of zein, are promising as topical delivery systems and oral drugs.

Caracterización de un modelo murino de glaucoma: implicación funcional de la señalización del receptor P2X7 en procesos neurodegenerativos de la retina

El glaucoma es una de las causas más comunes de discapacidad visual y una de las enfermedades neurodegenerativas oculares más frecuentes de pérdida irreversible de visión. La afectación originada en la retina se caracteriza por la degeneración de las células ganglionares y la pérdida de axones. La presión intraocular es un factor de riesgo importante en el glaucoma, entre otros factores, implicando mecanismos bioquímicos que desencadenan la muerte de las células ganglionares. El ratón DBA/2J es un modelo de hipertensión ocular y de degeneración de las células ganglionares de la retina (CGR). Las características principales de éste son la dispersión del pigmento del iris (IPD) y la atrofia del estroma del iris (ISA) que conducen a la patogénesis del glaucoma. Los mecanismos bioquímicos que comprometen al sistema purinérgico en procesos patológicos como la degeneración glaucomatosa han sido estudiados en los últimos años, siendo de gran relevancia como posibles dianas farmacológicas para el tratamiento de diferentes neuropatías. Los receptores P2X comprenden una familia de siete canales iónicos de membrana activados por ligando (P2X1-7) que se activan por el ATP extracelular (ATPe). En particular, los receptores P2X7 podrían estar involucrados en la regulación de la transmisión sináptica y la muerte neuronal en la retina. Además, la excitotoxicidad mediada por ATP a través de la activación del receptor P2X7 sugiere su posible implicación en la degeneración neuronal y la pérdida de la función visual en las retinas glaucomatosas. Tan importante como la presencia de este receptor purinérgico es estudiar los niveles de ATP extracelular de la retina, así como evaluar los cambios en la expresión del transportador de nucleótidos vesicular (VNUT) y los niveles de ecto-nucleotidasa (E-NPP1) en este modelo murino de glaucoma durante el desarrollo de la enfermedad...

Autoeficacia y competencias clave de la administración pública chilena: un estudio preliminar en la formación media técnico profesional

Chile ha aumentado la cobertura en la Educación Media Técnico–Profesional, sin embargo existen problemas que impiden mejorar su calidad: excesiva desregularización, favoreciendo el crecimiento inorgánico de especialidades; desconexión con las necesidades de competencias del trabajo; centros deficientes; carencias de evaluaciones de calidad de la educación y docentes poco capacitados (Sepúlveda, 2009). El año 2005, se validaron diez competencias transversales de la administración pública, que cumplen con los criterios de pertinencia y legitimidad, con alta transversalidad horizontal (todas las instituciones públicas) y vertical (todos los estamentos) (Vergara y Meneses, 2005). Esta tesis se orienta al conocimiento del enfoque de competencias laborales y de la teoría social cognitiva, en específico de la creencia de autoeficacia, con el fin de generar un instrumento que permita plasmar creencias de autoeficacia, en relación a las competencias transversales identificadas por la Administración Pública Chilena para técnicos-profesionales...

El vaciado del natural vida, muerte y aura en la escultura

Como término artístico, denominamos vaciado del natural al procedimiento por medio del cual se obtiene, a través de un proceso de moldes, una copia tridimensional precisa en cuanto a volumen y a texturas de cualquier elemento de la naturaleza, sea vivo o inerte, orgánico o inorgánico. El término también es utilizado para definir el producto resultante de la práctica de este procedimiento. Si aplicamos esta definición en sentido estricto, no podría considerarse vaciado del natural la reproducción por medio de moldes de elementos manufacturados por el hombre. No obstante, en la reproducción de elementos artificiales o manufacturados, se considera aplicable el término vaciado del natural a la reproducción de objetos que han sido creados para una función distinta de la artística que se pretende con su vaciado, como pueda ser una silla o una guitarra. Este procedimiento se ha aplicado habitualmente en la creación escultórica y a este ámbito se dirige el enfoque de la investigación. No obstante, por diversas causas, el procedimiento ha sido muy útil a otras áreas de conocimiento como la arqueología o la medicina y la evolución de su aplicación ha estado intrínsecamente unida a los creadores plásticos con los que se ha producido una estrecha colaboración. Esta se ha producido en las dos direcciones, acudiendo las ciencias que así lo requerían a los artistas como conocedores de la técnica y los procesos e incorporando los artistas a su trabajo las innovaciones desarrolladas por otras áreas e inspirándose en sus resultados. Esta estrecha colaboración hace que en la investigación se traten aspectos que atañen a otras áreas de conocimiento y se analicen sus conexiones con el arte. El objetivo de la presente investigación es desarrollar un estudio desde los posibles orígenes de este procedimiento y analizar su utilización a lo largo de la historia en el entorno socio-cultural de la civilización occidental. Para ello se acude a la documentación escrita que revela y analiza la utilización del vaciado del natural y se investigan las pruebas físicas que la demuestran (moldes, positivos, huellas del natural)...

Albinismo en Gallotia caesaris gomerae

[ES] El albinismo en reptiles no es una cualidad citada ampliamente. En lacértidos es aún menos frecuente, con descripciones de supuestos ejemplares albinos cuyas características cromáticas no parecen responder fielmente a las descripciones de este carácter que se define como una ausencia congénita de pigmento (melanina) en todo el cuerpo (incluido el globo ocular) motivada por causas genéticas {SOLOMON et al., 1996).

Functional alkali tantalate 2D structures for microelectronics and related applications

Alkali tantalates and niobates, including K(Ta / Nb)O3, Li(Ta / Nb)O3 and Na(Ta / Nb)O3, are a very promising ferroic family of lead-free compounds with perovskite-like structures. Their versatile properties make them potentially interesting for current and future application in microelectronics, photocatalysis, energy and biomedics. Among them potassium tantalate, KTaO3 (KTO), has been raising interest as an alternative for the well-known strontium titanate, SrTiO3 (STO). KTO is a perovskite oxide with a quantum paraelectric behaviour when electrically stimulated and a highly polarizable lattice, giving opportunity to tailor its properties via external or internal stimuli. However problems related with the fabrication of either bulk or 2D nanostructures makes KTO not yet a viable alternative to STO. Within this context and to contribute scientifically to the leverage tantalate based compounds applications, the main goals of this thesis are: i) to produce and characterise thin films of alkali tantalates by chemical solution deposition on rigid Si based substrates, at reduced temperatures to be compatible with Si technology, ii) to fulfil scientific knowledge gaps in these relevant functional materials related to their energetics and ii) to exploit alternative applications for alkali tantalates, as photocatalysis. In what concerns the synthesis attention was given to the understanding of the phase formation in potassium tantalate synthesized via distinct routes, to control the crystallization of desired perovskite structure and to avoid low temperature pyrochlore or K-deficient phases. The phase formation process in alkali tantalates is far from being deeply analysed, as in the case of Pb-containing perovskites, therefore the work was initially focused on the process-phase relationship to identify the driving forces responsible to regulate the synthesis. Comparison of phase formation paths in conventional solid-state reaction and sol-gel method was conducted. The structural analyses revealed that intermediate pyrochlore K2Ta2O6 structure is not formed at any stage of the reaction using conventional solid-state reaction. On the other hand in the solution based processes, as alkoxide-based route, the crystallization of the perovskite occurs through the intermediate pyrochlore phase; at low temperatures pyrochlore is dominant and it is transformed to perovskite at >800 °C. The kinetic analysis carried out by using Johnson-MehlAvrami-Kolmogorow model and quantitative X-ray diffraction (XRD) demonstrated that in sol-gel derived powders the crystallization occurs in two stages: i) at early stage of the reaction dominated by primary nucleation, the mechanism is phase-boundary controlled, and ii) at the second stage the low value of Avrami exponent, n ~ 0.3, does not follow any reported category, thus not permitting an easy identification of the mechanism. Then, in collaboration with Prof. Alexandra Navrotsky group from the University of California at Davis (USA), thermodynamic studies were conducted, using high temperature oxide melt solution calorimetry. The enthalpies of formation of three structures: pyrochlore, perovskite and tetragonal tungsten bronze K6Ta10.8O30 (TTB) were calculated. The enthalpies of formation from corresponding oxides, ∆Hfox, for KTaO3, KTa2.2O6 and K6Ta10.8O30 are -203.63 ± 2.84 kJ/mol, - 358.02 ± 3.74 kJ/mol, and -1252.34 ± 10.10 kJ/mol, respectively, whereas from elements, ∆Hfel, for KTaO3, KTa2.2O6 and K6Ta10.8O30 are -1408.96 ± 3.73 kJ/mol, -2790.82 ± 6.06 kJ/mol, and -13393.04 ± 31.15 kJ/mol, respectively. The possible decomposition reactions of K-deficient KTa2.2O6 pyrochlore to KTaO3 perovskite and Ta2O5 (reaction 1) or to TTB K6Ta10.8O30 and Ta2O5 (reaction 2) were proposed, and the enthalpies were calculated to be 308.79 ± 4.41 kJ/mol and 895.79 ± 8.64 kJ/mol for reaction 1 and reaction 2, respectively. The reactions are strongly endothermic, indicating that these decompositions are energetically unfavourable, since it is unlikely that any entropy term could override such a large positive enthalpy. The energetic studies prove that pyrochlore is energetically more stable phase than perovskite at low temperature. Thus, the local order of the amorphous precipitates drives the crystallization into the most favourable structure that is the pyrochlore one with similar local organization; the distance between nearest neighbours in the amorphous or short-range ordered phase is very close to that in pyrochlore. Taking into account the stoichiometric deviation in KTO system, the selection of the most appropriate fabrication / deposition technique in thin films technology is a key issue, especially concerning complex ferroelectric oxides. Chemical solution deposition has been widely reported as a processing method to growth KTO thin films, but classical alkoxide route allows to crystallize perovskite phase at temperatures >800 °C, while the temperature endurance of platinized Si wafers is ~700 °C. Therefore, alternative diol-based routes, with distinct potassium carboxylate precursors, was developed aiming to stabilize the precursor solution, to avoid using toxic solvents and to decrease the crystallization temperature of the perovskite phase. Studies on powders revealed that in the case of KTOac (solution based on potassium acetate), a mixture of perovskite and pyrochlore phases is detected at temperature as low as 450 °C, and gradual transformation into monophasic perovskite structure occurs as temperature increases up to 750 °C, however the desired monophasic KTaO3 perovskite phase is not achieved. In the case of KTOacac (solution with potassium acetylacetonate), a broad peak is detected at temperatures <650 °C, characteristic of amorphous structures, while at higher temperatures diffraction lines from pyrochlore and perovskite phases are visible and a monophasic perovskite KTaO3 is formed at >700 °C. Infrared analysis indicated that the differences are due to a strong deformation of the carbonate-based structures upon heating. A series of thin films of alkali tantalates were spin-coated onto Si-based substrates using diol-based routes. Interestingly, monophasic perovskite KTaO3 films deposited using KTOacac solution were obtained at temperature as low as 650 °C; films were annealed in rapid thermal furnace in oxygen atmosphere for 5 min with heating rate 30 °C/sec. Other compositions of the tantalum based system as LiTaO3 (LTO) and NaTaO3 (NTO), were successfully derived as well, onto Si substrates at 650 °C as well. The ferroelectric character of LTO at room temperature was proved. Some of dielectric properties of KTO could not be measured in parallel capacitor configuration due to either substrate-film or filmelectrode interfaces. Thus, further studies have to be conducted to overcome this issue. Application-oriented studies have also been conducted; two case studies: i) photocatalytic activity of alkali tantalates and niobates for decomposition of pollutant, and ii) bioactivity of alkali tantalate ferroelectric films as functional coatings for bone regeneration. Much attention has been recently paid to develop new type of photocatalytic materials, and tantalum and niobium oxide based compositions have demonstrated to be active photocatalysts for water splitting due to high potential of the conduction bands. Thus, various powders of alkali tantalates and niobates families were tested as catalysts for methylene blue degradation. Results showed promising activities for some of the tested compounds, and KNbO3 is the most active among them, reaching over 50 % degradation of the dye after 7 h under UVA exposure. However further modifications of powders can improve the performance. In the context of bone regeneration, it is important to have platforms that with appropriate stimuli can support the attachment and direct the growth, proliferation and differentiation of the cells. In lieu of this here we exploited an alternative strategy for bone implants or repairs, based on charged mediating signals for bone regeneration. This strategy includes coating metallic 316L-type stainless steel (316L-SST) substrates with charged, functionalized via electrical charging or UV-light irradiation, ferroelectric LiTaO3 layers. It was demonstrated that the formation of surface calcium phosphates and protein adsorption is considerably enhanced for 316L-SST functionalized ferroelectric coatings. Our approach can be viewed as a set of guidelines for the development of platforms electrically functionalized that can stimulate tissue regeneration promoting direct integration of the implant in the host tissue by bone ingrowth and, hence contributing ultimately to reduce implant failure.

Crescimento celular e produção de carotenoides pela microalga haematococcus pluvialis

O crescimento celular da microalga Haematococcus pluvialis e a bioprodução de carotenoides são influenciados pelas diferentes condições de cultivo. Dentre os corantes naturais, a astaxantina tem importante aplicação farmacêutica, cosmética e na indústria de alimentos. Este pigmento além de colorir, possui propriedades biológicas, dentre elas a atividade antioxidante. A produção de astaxantina através do cultivo de H. pluvialis pode alcançar até 4% do peso seco da microalga. O objetivo desse trabalho foi avaliar o crescimento celular, bem como a produção de carotenoides pela microalga Haematococcus pluvialis em diferentes condições de cultivo e a atividade antioxidante dos extratos carotenogênicos. Foram utilizados os meios autotróficos Blue Green-11 (BG-11), BAR (Barbera Medium) e BBM (Bold Basal Medium) e os meios mixotróficos BBM e glicose e BBM e acetato de sódio, empregando 10 ou 20% de inóculo em pHs iniciais de 6, 7 ou 8, aeração de 0,30 L.min-1 , sob iluminância de 6 Klx, 24±1ºC durante 15 dias em fotobiorreatores de 1 L. A concentração celular foi avaliada diariamente através de leitura de absorvância a 560 nm. A ruptura celular foi realizada através de 0,05 g de células secas com 2 mL de dimetilsulfóxido e a concentração de carotenoides totais determinada a partir de leitura espectrofotométrica a 474 nm. Os meios de cultivo BG-11, BBM e glicose e BBM e acetato de sódio apresentaram, respectivamente, o maior crescimento celular e produção de carotenoides totais de 0,64, 1,18 e 0,68 g.L-1 , e 3026,66, 2623,12 e 2635,38 µg.g-1 , empregando 10% de inóculo em pH inicial de 7. Com base nesses resultados, foram selecionados esses três meios para dar continuidade ao trabalho. O meio de cultivo BBM e acetato de sódio obteve o melhor valor de concentração celular máxima, com 1,29±0,07 g.L-1 e de carotenoides totais 5653,56 µg.g-1 empregando pH inicial de 7 e concentração de inóculo de 20%. Este meio foi selecionado para a realização dos cultivos com injeção de 30 % de CO2 uma vez ao dia durante 1 hora, realizados durante 22 dias, em pH inicial de 7 e 20% de inóculo, com 30% de injeção de CO2 uma vez ao dia durante 1 hora. Nestas condições o crescimento celular alcançou o máximo de 1,13 g.L-1 (10 dias), carotenoides totais específicos de 2949,91 µg.g-1 e volumétricos de 764,79 µg.g-1 .L-1 (22 dias). A capacidade antioxidante dos extratos carotenogênicos também foi avaliada pelos métodos DPPH, FRAP e ABTS, não sendo possível quantificá-la através do DPPH e FRAP. Por outro lado, utilizando o método ABTS, em 90 minutos de reação, o poder de inibição encontrado foi de 35,70 % μg-1 . Assim, a condição que mais se destaca é a utilização do meio de cultivo BBM e acetato de sódio, com pH inicial 7, com 20% de inóculo, 0,30 L.min-1 de aeração, 6 Klx e 24±1ºC, uma vez que o crescimento celular e a bioprodução de carotenoides foi significativamente superior quando comparada às demais condições estudadas. Além disso, os carotenoides produzidos pela H. pluvialis, nesta condição, apresentaram capacidade antioxidativa.

Alcaptonúria: relato de caso

Introdução: A alcaptonúria é uma doença rara do metabolismo da fenilalanina e tirosina. As manifestações oculares desta doença são comuns, afectam várias estruturas oculares e podem auxiliar no diagnóstico da doença. Métodos: Descrição clínica de um doente com alcaptonúria Resultados: Homem 70 anos, que recorreu ao serviço de urgência por queixa de baixa acuidade visual progressiva. Apresentava lesões hiperpigmentadas na conjuntiva, esclera e córnea perilímbica e pressão intraocular elevada. Como antecedentes pessoais referia o diagnóstico de artropatia ocronótica, litíase renal e lesões hiperpigmentadas na pele. Estabeleceu-se o diagnóstico de alcaptonúria e glaucoma secundário. Conclusōes:. Várias estruturas oculares são afectadas, sendo a hiperpigmentação da esclera, sobretudo na área interpalpebral, a principal manifestação ocular e a deposição de pigmento em “oil drop” na córnea perilímbica considerada patognomónica da doença. É fundamental conhecer esta patologia, seus achados clínicos e tê-la em consideração no diagnóstico diferencial de hiperpigmentação das estruturas oculares.

Estudo comparativo de dois tipos de cultivo: monocultivo (camarões) versus cultivo integrado (algas/camarões)

The integrated culture of seaweed and aquatic animals is an ancient practice in Asian countries. The expansion of this practice to western countries is consequence of the recognition of this system as a sustainable alternative that allows economical diversification and mitigation of environmental impacts generated by effluents of aquaculture. This study evaluated the growth of the seaweed Gracilaria caudata and of the shrimp Litopenaeus vannamei in monoculture (shrimps) and integrated culture (shrimps and algae) systems, and accessed the effect of the seaweed in the water quality. There were two treatments in the experiment: monoculture (shrimps) and integrated culture (shrimps/ algae). The organisms were cultured in 6 aquaria (10L) filled with seawater (35.0±0.0 PSU and 28.1±0.4°C) for 28 days. The nutrients of water (PO43-, NH4+, NO2-, NO3- and DIN), the biomass and the relative growth rate (RGR, % day-1) of seaweed and shrimps were measured weekly. The parameters pH, temperature, salinity and dissolved oxygen were measured daily. The concentration of NH4+ in integrated culture (62.8±25.2µM) was lower (Mann-Whitney p<0.001) than in monoculture (85.6±24.3µM). The mean of PO4- in monoculture (10.4±4.6µM) was markedly higher (Mann-Whitney; p=0.024) than that in integrated culture (8.7±4.1µM). The level of dissolved oxygen in integrated culture (6.0±0.6mg/L) was higher (t-Student; P=0.014) than that in shrimp monoculture (5.8±0.6mg/L). The mean values of the parameters pH, NO2-, NO3- and DIN were 7.5±0.2, 10.1±12.2µM, 24.5±3.2µM and 120.17±30.76µM in monoculture, and 7.5±0.2, 10.5±13.2µM, 27.4±3.5µM and 100.76±49.59µM in integrated culture. There were not differences in these parameters between treatments. The biomass and RGR of seaweed reached 15.0±1.9g and 7.4±2.8% day-1 at the end of the experiment. The performance of shrimp was favorable in monoculture (1.5±0.8g; 5.7±1.6% dia-1) and in integrated culture (1.5±0.7g; 5.2±1.2% dia-1), and the rate of survival was 100% in both treatments. The tolerance and favorable performance of Gracilaria caudata suggest that this seaweed might be integrated into shrimp (Litopenaeus vannamei) culture systems