Avaliação da efetividade de cimentos resinosos auto-adesivos aplicados sob diferentes pré-tratamentos da dentina radicular na resistência adesiva de pinos de fibra de vidro

Pós-graduação em Ciências Odontológicas - FOAR

Variação, herdabilidade e ganhos genéticos em progênies de Eucalyptus tereticornis aos 25 anos de idade em Batatais-SP

The wood of Eucalyptus tereticornis is intensively used for timber, structures, buildings, poles, posts and coal. The aim of this study was to estimate genetic parameters and genetic and phenotypic correlations in growth and stem form traits of 52 open-pollinated progenies of E. tereticornis sampled from three Australian populations (20 progenies from Helenvale, 19 from Ravenshoe and 13 from Mt. Garnet). The progenies were compared with three commercial control also from Australian. The experimental design used was the compact family block, with the effect of provenance allocated in the plots and progenies within provenances in the subplots. Ten repetitions of the 52 treatments, sub-plots with six plants and the spacing of 3 x 2 m was used. At 25 years of age it was measured the diameter at breast height (DBH), total height, true volume and the stem form. We found genetic variation amon and within the three provenances and the possibility of obtaining high gains from mass selection and individual among and within progenies. The provenance Helenvale showed the best development for DBH, height and volume. The traits DBH, height and volume showed high genetic correlations (> 0.9), indicating the possibility to use the indirect selection. The coefficient of heritability on a progeny mean for the traits DBH and height was median, being 0.31 and 0.30, respectively. The expected genetic gain with the selection were estimated at 12.4% for DBH and 8.5 % for plant height. These results will subsidize the transformation of the provenance and progeny test in a seedling seed orchard and a clonal seed orchard.

Effect of root canal preparation, type of endodontic post and mechanical cycling on root fracture strength

Objective: To evaluate the impact of the type of root canal preparation, intraradicular post and mechanical cycling on the fracture strength of roots. Material and Methods: Eighty human single rooted teeth were divided into 8 groups according to the instruments used for root canal preparation (manual or rotary instruments), the type of intraradicular post (fiber posts-FRC and cast post and core-CPC) and the use of mechanical cycling (MC) as follows: Manual and FRC; Manual, FRC and MC; Manual and CPC; Manual, CPC and MC; Rotary and FRC; Rotary, FRC and MC; Rotary and CPC; Rotary, CPC and MC. The filling was performed by lateral compactation. All root canals were prepared for a post with a 10 mm length, using the custom # 2 bur of the glass fiber post system. For mechanical cycling, the protocol was applied as follows: an angle of incidence of 45 degrees, 37 degrees C, 88 N, 4 Hz, 2 million pulses. All groups were submitted to fracture strength test in a 45 degrees device with 1 mm/min cross-head speed until failure occurred. Results: The 3-way ANOVA showed that the root canal preparation strategy (p<0.03) and post type (p<0.0001) affected the fracture strength results, while mechanical cycling (p=0.29) did not. Conclusion: The root canal preparation strategy only influenced the root fracture strength when restoring with a fiber post and mechanical cycling, so it does not seem to be an important factor in this scenario.

Effect of the interfacial area measurement parameters on the push-out strength between fiber post and dentin

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeitos do tipo de sistema adesivo e região do dente sobre a resistência adesiva à dentina

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Contribuição das redes de T.I. para formulação da estratégia e gestão das empresas

Pós-graduação em Engenharia de Produção - FEB

Anatomização de pinos de fibra de vidro: estudo de propriedades mecânicas na interface restauradora adesiva

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of tensile tetention of Y-TZP crowns after long-term aging: Effect of the core substrate and crown surface conditioning

This study evaluated the effect of the core substrate type (dentin and composite resin) on the retention of crowns made of yttrium oxide stabilized tetragonal zirconia polycrystal (Y-TZP), submitted to three inner surface conditionings. For this purpose, 72 freshly extracted molars were embedded in acrylic resin, perpendicular to the long axis, and prepared for full crowns: 36 specimens had crown preparations in dentin; the remaining 36 teeth had the crowns removed, and crown preparations were reconstructed with composite resin plus fiber posts with dimensions identical to the prepared dentin. The preparations were impressed using addition silicone, and 72 Y-TZP copings for the tensile test were produced. Cementation was performed with a dual-cured cement containing phosphate monomers. For cementation, the crown preparation (dentin or resin) was conditioned with the adhesive system, and the ceramic was subjected to one of three surface treatments: isopropyl alcohol, tribochemical silica coating, or thin low-fusing glassy porcelain layer application plus silanization. After 24 hours, all specimens were submitted to thermocycling (6000 cycles) and placed in a special tensile testing device in a universal testing machine to determine failure loads. The failure modes of all samples were analyzed under a stereomicroscope. Two-way analysis of variance showed that the surface treatment and substrate type (alpha=0.05) affected the tensile retention results. The dentin substrate presented the highest tensile retention values, regardless of the surface treatment. When the substrate was resin, the tribochemical silica coating and low-fusing glaze application plus silanization groups showed the higher retention values.

Desempenho motor de escolares com dislexia, transtornos e dificuldades de aprendizagem

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Projeto e construção de uma célula de carga acoplada a uma grampeadeira

Due to greater productivity in the auto industry and the high competition in the current market, employees are required to perform repeated movements and often, with short intervals of rest. This daily exposure causes muscle tension and overloads occasional, thus creating problems and psychosocial stress. Currently companies are concerned with the welfare of the employee, where the main focus is product quality and life of the worker, thus justifying such a study. Therefore , this technical work to assist the master's thesis of graduate student Daniel Rodriguez , was developed with the objective is to analyze , develop, design and construct a coupled to a load cell device simulating a stitcher to be used in an industry the posts stapling upholstery of seats . Are the stages of design and construction detailed in this work and its positive results in relation to the technical part of the study

Patentes patéticas

The objective of this project is to publish a book of scientific dissemination aimed at the subject of intellectual or industrial property, in particular patent, and its approval process. Based on a series of weekly blog posts published by its author, Patentes Patéticas use scientific, literary journalism and humour techniques to analyze a selection of U.S. patents that stand out for their questionable utility and criticize the number of patents granted as a metric of technological innovation in a country

As vazões de outorga das bacias hidrográficas dos rios Aguapeí e Peixe

This work presents procedures for getting data to estimate grant flow by means of statistical and hydrological methods, acquired during the graduate course, of some streams in the watersheds of Aguapeí and Peixe rivers, in order to make available this data set to Sao Paulo State water and electrical energy department – DAEE and to the Committees of Aguapeí and Peixe watersheds. This study was performed using discharge data and the were a selection process to identify some faults in the historical series. Finally it was calculated the 7-day moving averages, Q7 and some characteristics discharges like Q90 and Q95. Taking into account the average discharge en seven days in a 10-year recurrence interval, it was estimated the grant flow of some streams. Data were generated for six posts inside the Aguapei and Peixe watersheds

O léxico e a moda: anglicismos nas manifestações linguísticas do blog The Blonde Salad

Within the discussion of fashionblogs and their contributions to scientific studies, we start from the speech of Barthes (2006) about the relevance of the lexicon in the construction of Fashion and we met the theorists of Lexicology / Lexicography to define Anglicism (BIDERMAN, 2001), and the observation of its prestige in the Italian Language (ROGATO, 2008; BISETTO, 2003) and in the blog The Blonde Salad. Confronting this theoretical framework, we conducted a brief analysis of the anglicisms collected from posts of the first year of existence of such fashionblog, as a result of this work.

Contaminação do lençol freático por hidrocarbonetos na região de Avaré - SP

Pós-graduação em Engenharia Civil e Ambiental - FEB

A repercussão midiática das mensagens na camisa do corinthians nos sites esportivos Lance Net, Globo Esporte e ESPN

Pós-graduação em Comunicação - FAAC