Evaluation of positioning error-induced pixel shifts on satellite linear push-broom imagery

Georeferencing is one of the major tasks of satellite-borne remote sensing. Compared to traditional indirect methods, direct georeferencing through a Global Positioning System/inertial navigation system requires fewer and simpler steps to obtain exterior orientation parameters of remotely sensed images. However, the pixel shift caused by geographic positioning error, which is generally derived from boresight angle as well as terrain topography variation, can have a great impact on the precision of georeferencing. The distribution of pixel shifts introduced by the positioning error on a satellite linear push-broom image is quantitatively analyzed. We use the variation of the object space coordinate to simulate different kinds of positioning errors and terrain topography. Then a total differential method was applied to establish a rigorous sensor model in order to mathematically obtain the relationship between pixel shift and positioning error. Finally, two simulation experiments are conducted using the imaging parameters of Chang’ E-1 satellite to evaluate two different kinds of positioning errors. The experimental results have shown that with the experimental parameters, the maximum pixel shift could reach 1.74 pixels. The proposed approach can be extended to a generic application for imaging error modeling in remote sensing with terrain variation.

How students view the boundaries between their science and religious education concerning the origins of life and the universe

Internationally in secondary schools, lessons are typically taught by subject specialists, raising the question of how to accommodate teaching which bridges the sciences and humanities. This is the first study to look at how students make sense of the teaching they receive in two subjects (science and religious education) when one subject’s curriculum explicitly refers to cross-disciplinary study and the other does not. Interviews with 61 students in seven schools in England suggested that students perceive a permeable boundary between science and their learning in science lessons and also a permeable boundary between religion and their learning in RE lessons, yet perceive a firm boundary between science lessons and RE lessons. We concluded that it is unreasonable to expect students to transfer instruction about cross-disciplinary perspectives across such impermeable subject boundaries. Finally we consider the implications of these findings for the successful management of cross-disciplinary education.

Influence of implant positioning in extraction sockets on osseointegration: histomorphometric analyses in dogs

Aim To evaluate the influence of implant positioning into extraction sockets on osseointegration. Material and methods Implants were installed immediately into extraction sockets in the mandibles of six Labrador dogs. In the control sites, the implants were positioned in the center of the alveolus, while in the test sites, the implants were positioned 0.8 mm deeper and more lingually. After 4 months of healing, the resorptive patterns of the alveolar crest were evaluated histomorphometrically. Results All implants were integrated in mineralized bone, mainly composed of mature lamellar bone. The alveolar crest underwent resorption at the control as well as at the test sites. After 4 months of healing, at the buccal aspects of the control and test sites, the location of the implant rough/smooth limit to the alveolar crest was 2 +/- 0.9 mm and 0.6 +/- 0.9 mm, respectively (P < 0.05). At the lingual aspect, the bony crest was located 0.4 mm apically and 0.2 mm coronally to the implant rough/smooth limit at the control and test sites, respectively (NS). Conclusions From a clinical point of view, implants installed into extraction sockets should be positioned approximately 1 mm deeper than the level of the buccal alveolar crest and in a lingual position in relation to the center of the alveolus in order to reduce or eliminate the exposure above the alveolar crest of the endosseous (rough) portion of the implant. To cite this article:Caneva M, Salata LA, de Souza SS, Baffone G, Lang NP, Botticelli D. Influence of implant positioning in extraction sockets on osseointegration: histomorphometric analyses in dogs.Clin. Oral Impl. Res. 21, 2010; 43-49.

New mechanical samples positioning system for irradiations on a radial channel at nuclear research reactor in a full-power continuous operation

This paper describes a new mechanical samples positioning system that allows the safe placement and removal of biological samples for prolonged irradiation, in a nuclear reactor during full-power continuous operation. Also presented herein the materials of construction and operating principles. Additionally, this sample positioning system is compared with an existing pneumatic and automated transfer system, already available at the research reactors. The system consists of a mechanical arm with a claw, which can deliver the samples for irradiations without reactor shutdown. It was installed in the lEA-R1 research reactor at Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, Brazil, and for the past 5 years, the system has successfully operated and allowed the conducting of important experiments. As a result of its introduction, the facility has been in a position to positively respond to the increased demand in studies of biology, medicine, physics, engineering, detector/dosimeter calibrations, etc. It is one example of the appropriated technologies that save energy and resources. (C) 2010 Elsevier Ltd. All rights reserved.

How grain boundaries modify the high-temperature dielectric response of ferroelectric electroceramics like BaTiO(3)?

Dielectric properties of BaTiO(3) ferroelectric ceramics were studied over wide frequency and temperature ranges. The materials showed complex dielectric behaviors, which included an anomalous increase of permittivity towards higher temperatures. Important, this property tended however to saturate to values that varied with grain-boundary density. Application of impedance spectroscopy and consideration of the series-layer model allowed a coherent discussion of these and other interesting observations from this work. In particular, analysis of the relationship existing in this model between macroscopic and microscopic dielectric properties rendered possible to account for grain vs. grain-boundary dielectric behaviors, in harmony with microstructure features, and to know the dielectric anomaly strength to be in fact expected from grain boundaries in such polycrystalline materials. (C) 2010 Elsevier Ltd. All rights reserved.

The Relationship Between Watershed Boundaries and Elevation in Maine

http://digitalcommons.colby.edu/atlasofmaine2005/1000/thumbnail.jpg

Punitive damages in Brazilian law and the boundaries between criminal and civil liabilities

This article demonstrates the existence of civil responsibility with punitive purposes in Brazilian Law, explaining how it was introduced by jurisdictional activity in cases involving moral damages. Next, it points out main problems this situation represents to Brazilian Law from the standpoint of our juridical dogmatics and public policies. Additionally, it proposes the execution of an empirical research for comprehension of the structure and fundamentals of jurisprudence on the punitive character of civil responsibility for moral damages and establishes criteria for use in this research based on theories of punishment. Finally, it positions the problem of punitive function of civil responsibility in the broader ambit of relationships and boundaries between civil and criminal responsibility.

A complexidade da gestão em processos de internacionalização: como a cultura Nacional impacta o processo decisório de gestores brasileiros expatriados - o caso de uma empresa estatal do setor de energia

In a world where the companies are trying to compete on a global scale, the positioning strategies direct them to go beyond the geographical boundaries of their base countries, seeking for other markets, as a way to keep globally competitive. These conditions make crucial the roles performed by their managers, exposed to different contexts, mainly economical, political, social and cultural and to face the task to manage enterprises like a challenge, probably bigger than the one found on their base countries. This speech tries to examine how much expatriated Brazilian managers feel the influence of local cultural factors in their decisional processes, taking into consideration that they are embedded in their cultural home countries, and they can suffer an impact by the culture of other countries. With this research it is intended to gather empirical material that will supply clues and allow to advance on studies that will make a relationship between decisional process and local culture, through a case study in a Brazilian state-owned energy company and its subsidiaries in South American countries, hoping that the mentioned studies will somehow contribute to a better understanding of the problems that have been stressed in the last decades. Also considering that the vast majority of the theoretical and empirical material about this matter has its own source on the western developed countries and are, in this way, culture-bounded, we hope to increase the production of studies and researches applied to the Latin American reality, mainly the Brazilian one.