Effets d'un appareil d'avancement mandibulaire calibré sur le bruxisme relié au sommeil

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal

Étude pilote des effets du Tandem Forsus Maxillary Corrector sur la croissance des maxillaires

Objectif : Récemment, un nouvel appareil issu de la technologie du Forsus™ et visant à corriger les malocclusions de classe III a été mis sur le marché et se popularise dans la pratique orthodontique : le Tandem Forsus Maxillary Corrector (TFMC). L’objectif de la présente étude est de mesurer les effets squelettiques, l’influence réelle sur la croissance, et les effets dento-alvéolaires du port du TFMC. Matériel et méthodes : 14 patients présentant une malocclusion de classe III (âge moyen de 9 ans 6 mois) traités par le même orthodontiste ont participé à cette étude prospective. Le groupe consiste en 10 garçons et 4 filles. Le Tandem Forsus Maxillary Corrector est porté de 12 à 14 heures par jour jusqu’à l’obtention d’une surcorrection du surplomb horizontal et une relation dentaire de classe I. Le traitement est généralement d’une durée de 8 à 9 mois. Des radiographies céphalométriques latérales prises avant (T1) et après (T2) le traitement ont été analysées afin de déterminer les changements dentaires et squelettiques. Les résultats ont été comparés à un groupe contrôle composé de 42 enfants provenant du Centre de croissance de l’Université de Montréal. Les radiographies ont été tracées et analysées de manière aveugle à l’aide du logiciel Dolphin Imaging (ver 11.0, Patterson Dental, Chatsworth, California). L’erreur sur la méthode a été évaluée avec la formule de Dahlberg, le coefficient de corrélation intra-classe et l’indice de Bland-Altman. L’effet du traitement a été évalué à l’aide du test t pour échantillons appariés. L’effet de la croissance pour le groupe contrôle a été calculé à l’aide d’un test t pour échantillons indépendants. Résultats : L’utilisation du TFMC produit un mouvement antérieur et une rotation antihoraire du maxillaire. De plus, il procline les incisives supérieures et rétrocline les incisives inférieures. Une rotation antihoraire du plan occlusal contribue aussi à la correction de la malocclusion de classe III. Par contre, le TFMC ne semble pas avoir pour effet de restreindre la croissance mandibulaire. Conclusion : La présente étude tend à démontrer que le port de l’appareil TFMC a un effet orthopédique et dento-alvéolaire significatif lors du traitement correctif des malocclusions modérées de classe III.

Une évaluation de la dimension de la lumière de boîtiers 0,018" provenant de quatre différents manufacturiers. Existe-t-il un standard dans l’industrie?

Introduction: The objective of this experimental research was to evaluate the slot’s vertical dimension and profile of four different 0.018″ self-ligating brackets and to identify the level of tolerance accepted by manufacturers during the fabrication process. It was then possible to calculate and compare the torque play of those brackets using the measured values and the nominal values. Material and Methods: Twenty-five 0.018″ self-ligating brackets of upper left central incisors from the following manufacturers, Speed® (Strite Industries, Cambridge, Ontario, Canada), InOvationR® (GAC, Bohemia, NY, USA), CarriereLX® (Ortho Organizers, Carlsbad, CA, USA) and SmartClip® (3M Unitek, Monrovia, CA, USA), were evaluated using electron microscopy with 150X images. The height of each bracket was measured at every 100 microns of depth from the lingual wall at five different levels. A Student T test was then used to compare our results with the manufacturer’s stated value of 0.018″. To determine if there was a significant difference between the four manufacturers, analysis of variance (ANOVA) was performed at the significance level of p<0.05. The torque play was then calculated using geometrical formulas. Results: On average, Speed brackets were oversized by 2.7%[MV 0.0185″ (SD:0.002)], InOvationR by 3.7% [MV 0.0187″ (SD:0.002)], CarriereLX by 3.2% [MV 0.0186″ (SD:0.002)] and SmartClipSL by 5.0% [MV 0.0189″ (SD:0.002)]. The height of all brackets was significantly higher than the nominal value of 0.018″ (p<0.001). The slot of SmartClip brackets was significantly larger than those of the other three manufacturers (p<0.001). None of the brackets studied had parallel gingival and occlusal walls; some were convergent and others divergent. These variations can induce a torque play up to 4.5 degrees with a 0.017″x0.025″ wire and 8.0 degrees with a 0.016″x0.022″ wire. Conclusion: All studied brackets were oversized. None of the brackets studied had parallel gingival and occlusal walls and there was no standard between manufacturers for the geometry of their slots. These variations can cause a slight increase of the torque play between the wire and the bracket compared with the nominal value.

El uso de sangre fresca total en cardiopatías congénitas complejas

Objetivos: Describir si el uso de sangre fresca total (SFT) intraoperatoria en pacientes llevados a procedimientos RACHS 3 y 4 en la Fundación Cardioinfantil, disminuye el sangrado postoperatorio y el volumen de transfusión de elementos sanguíneos, en comparación a aquellos en quienes no se usa SFT. Materiales y métodos: Se realizó un estudio de cohorte histórica, tomando una población menor de 1 año expuesta a la sangre fresca total y comparándola con una población de similares características, llevadas a procedimientos de riesgo similar no expuesta. Los análisis se realizaron mediante pruebas estándar para variables continuas y discretas. Un valor de p menor a 0.05 fue aceptado como signficativo. Resultados: 46 pacientes expuestos a SFT y se compararon con 50 pacientes no expuestos. La principal diferencia entre los grupos fue la edad, siendo mayor en el grupo de no expuestos (3.8 años vs 0.9; p<0.001). El volumen de sangrado postoperatorio fue similar, sin embargo los pacientes expuestos a SFT recibieron mayor volumen de transfusiones, sin ser una diferencia estadísticamente significativa (155cc vs 203cc, P=0.9). No hubo diferencia significativa en complicaciones o mortalidad. Conclusiones: En nuestro estudio no se encontró una disminución en el volumen de sangrado postoperatorio en los pacientes menores de 1 año, sometidos a cirugías catalogadas como RACHS 3 y 4, expuestos a SFT, sin embargo se necesitan estudios clínicos controlados que respondan definitivamente a la pregunta.

Análisis de los componentes de la cadena de suministro y global manufacturing y su relación con el desempeño organizacional en el sector manufacturero

El presente trabajo tiene como objetivo mostrar la relación que existe entre la cadena de suministro, global manufacturing y su relación con el desempeño organizacional en el sector manufacturero. El proyecto va a estar divido en tres grandes partes, en primer lugar estará el marco conceptual donde se especificarán los conceptos más significativos que abarcan la investigación, seguido del marco teórico donde se expondrán las teorías y estudios encontrados, analizados y estudiados con el fin de desembocar en la tercer parte que serán las conclusiones y recomendaciones que se darán a partir de los análisis y teorías que compactan el tema de la relación existente entre la cadena de suministro, global manufacturing y el desempeño organizacional.

Determinación del perfil de exposición potencial a contaminantes químicos mediante el uso de metodologías de evaluación simplificada en trabajadores de autopartes en el barrio La Paz, Bogotá 2015

Las actividades de mantenimiento automotriz en el sector de autopartes conlleva el uso de agentes químicos bajo diversas circunstancias de exposición, tanto en las condiciones de manipulación de productos químicos como a las características propias de cada actividad de mantenimiento asociado a las tareas específicas del trabajo. Tradicionalmente la evaluación de contaminantes químicos desde la visión de la Higiene Ocupacional incluye la evaluación cuantitativa de la exposición mediante técnicas instrumentales concretas y estandarizadas, determinando el nivel de concentración en aire a la cual un trabajador se ve expuesto y que, en comparación con valores límites permisibles (VLPs), inducen el establecimiento de medidas de control y vigilancia, según el nivel de riesgo caracterizado. Sin embargo es evidente la limitación de la implementación de esta sistemática en particular en micros y pequeñas empresas que carecen de los recursos suficientes para abordar la problemática de forma objetiva. En este contexto diversas metodologías de evaluación cualitativa o subjetiva se han desarrollado por distintas organizaciones en el mundo con el fin de disminuir la brecha entre el establecimiento de medidas de control y la valoración del riesgo, ofreciendo alternativas confiables para la toma de decisiones preventivas sin la necesidad de acudir a mediciones cuantitativas. Mediante la presente investigación se pretende validar la efectividad en el uso de una herramienta de evaluación simplificada del riesgo químico propuesta por el INRS (Institut National de Recherche et de Sécurité Francés) mediante la determinación del perfil de exposición potencial a contaminantes químicos de la población laboral de 36 almacenes de autopartes ubicados en el barrio la Paz de la ciudad de Bogotá, Colombia, divididos según énfasis de actividades en Partes Externas, Partes Eléctricas e Inyección, Partes Mecánicas, Partes Múltiples, a través de un estudio de corte transversal. El estudio permitió Jerarquizar el riesgo potencial, valorar el riesgo vía inhalatoria y dérmica para finalmente construir el perfil de exposición potencial a contaminantes químicos de trabajadores. La información de las variables de análisis fue consolidada en una herramienta informática diseñada para tal fin, la cual facilito la administración de los datos y su respectivo análisis. Con base en los hallazgos fue posible establecer los productos químicos que de acuerdo a las condiciones de trabajo y circunstancias de exposición sugieren medidas específicas para la disminución del riesgo potencial de acuerdo a la calificación global de los agentes, permitiendo deducir la viabilidad de la aplicación de herramientas de valoración cualitativa para la evaluación del riesgo químico como estrategia de prevención primaria.

Evaluation of in vitro resistance of titanium and resorbable (poly-L-DL-lactic acid) fixation systems on the mandibular angle fracture

The purpose of this study was to compare, by mechanical in vitro testing, a 2.0-mm system made with poly-L-DL-lactide acid with an analogue titanium-based system. Mandible replicas were used as a substrate and uniformly sectioned on the left mandibular angle. The 4-hole plates were adapted and stabilized passively in the same site in both groups using four screws, 6.0 mm long. During the resistance-to-load test, the force was applied perpendicular to the occlusal plane at three different points: first molar at the plated side; first molar at the contralateral side; and between the central incisors. At 1 mm of displacement, no statistically significant difference was found. At 2 mm displacement, a statistically significant difference was observed when an unfavourable fracture was simulated and the load was applied in the contralateral first molar and when a favourable fracture was simulated and the load was applied between the central incisors. At the failure displacement, a statistically significant difference was observed only when the favourable fracture was simulated and the load was applied on the first molar at the plated side. In conclusion, despite more failure, the poly-L-DL-lactic acid-based system was effective.

The Usefulness of Caries Frequency, Depth, and Location in Determining Cariogenicity and Past Subsistence: A Test on Early and Later Agriculturalists From the Peruvian Coast

Dental markers have been used to unravel particularities of paleodiet, subsistence, social structure, and health. This article aims to compare oral pathology among four pre-Columbian groups with different degrees of agricultural and socio-cultural development but comparable ecological conditions who lived on the coastal desert of Peru. Three of these groups are assigned to distinct phases of the Formative Period (2500-1 BC), a time critical for our understanding of the development of agriculture and social complexity. The fourth group corresponds to the Late Intermediate Period (1000-1470 AD), when agriculture had its apogee and society was highly stratified. In this study we test whether there is an increase (1) in the frequency of carious lesions and (2) in caries depth, and (3) if there is a shift from occlusal to extra-occlusal caries locations with the development of agriculture. Therefore, we analyze the frequencies of carious lesions and antemortem tooth loss (AMTL), the caries distributions by age, sex, and type of tooth, as well as the tissues affected by, and the location of the carious lesions. Since there are no significant differences in the frequencies of carious lesions and AMTL between the groups, we reject hypothesis 1. In contrast, caries depth does increase, and caries location changes from occlusal to extra-occlusal sites with agricultural development. However, we can only corroborate hypothesis 2 and 3 when taking into consideration dental wear. Thus, we recommend that caries depth and locations should be used with evaluations of dental wear to reconstruct subsistence in ancient populations. Am J Phys Anthropol 143:75-91, 2010. (C) 2010 Wiley-Liss, Inc.

Estudo da viabilidade do sistema LZAS para uso como selante de PaCOS

Cells the solid oxide fuel are systems capable to directly convert energy of a chemical reaction into electric energy in clean, quiet way and if its components in the solid state differentiate of excessively the techniques for having all. Its more common geometric configurations are: the tubular one and to glide. Geometry to glide beyond the usual components (anode, cathode and electrolyte) needs interconnect and sealant. E the search for materials adjusted for these components is currently the biggest challenge found for the production of the cells. The sealants need to present chemical stability in high temperatures, to provoke electric isolation, to have coefficient of compatible thermal expansion with the excessively component ones. For presenting these characteristics the glass-ceramics materials are recommended for the application. In this work the study of the partial substitution of the ZrO2 for the Al2O3 in system LZS became it aiming at the formation of system LZAS, this with the addition of natural spodumene with 10, 20 and 30% in mass. The compositions had been casting to a temperature of 1500°C and later quickly cooled with the objective to continue amorphous. Each composition was worn out for attainment of a dust with average diameter of approximately 3μm and characterized by the techniques of DRX, FRX, MEV, dilatometric analysis and particle size analysis. Later the samples had been conformed and treated thermally with temperatures in the interval between 700-1000 °C, with platform of 10 minutes and 1 hour. The analyses for the treated samples had been: dilatometric analysis, DRX, FRX, electrical conductivity and tack. The results point with respect to the viability of the use of system LZAS for use as sealant a time that had presented good results as isolating electric, they had adhered to a material with similar α of the components of a SOFC and had presented steady crystalline phases

Prevalência de oclusopatias e caracteríticas cefalométricas e dentais de escolares cearense da cidade de Fortaleza

The people of Ceará state are descended from miscegenation between the Portuguese colonizers and the native population, resulting in a different facial pattern from other populations. It is important that this pattern be thoroughly understood, along with its minimum and maximum values so that they can be assessed and respected, allowing professionals who deal with the craniofacial complex to work more efficiently and scientifically. Aim: To characterize the morphological pattern of individuals from Ceará state, whose father and grandfather are also native from Ceará, in the 10-12 year age group, not submitted to previous orthodontic treatment, in order to determine: 1) the prevalence of occlusal pattern; 2) the prevalence of dental anomalies (DA) and, 3) the skeletal and dental cephalometric characteristics of individuals that present with normal occlusion and harmonious facial pattern. Methodology: A list of 10-12 year-olds was obtained from 515 schools containing 162,713 students (Education Secretariat of Ceará State), from which 234 individuals were examined (107 boys and 157 girls). The assessment criteria adopted were: 1) Angle s Classification System to determine occlusal pattern. The occlusal characteristics were measured through overbite, overjet, crowding and interincisal diastema. 2) DA are anomalies of number, shape, size, eruption and structure and, 3) in the group that presented with normal occlusion, we used cephalometric analysis measures proposed by Downs, Steiner, Tweed, Holdaway, Jacobson and McNamara. Results: 1) 25.8% of the schoolchildren had normal occlusion, 47.5% class I malocclusion, 22.3% class II malocclusion and 4.2% class III malocclusion. No statistically significant difference was found between the age group studied and sex. Thirty percent of the individuals had normal overbite, while 36.7% and 19.7% had increased and reduced overbite, respectively. Normal overjet was found in 33.7% of the individuals, increased overjet in 50% and reduced in 16.3%. Dental crowding was observed in 62.5% of the individuals and the presence of interincisal diastema in 14.8%. 2) The prevalence of DA was 56.1%, 6.8% in the number, 10.8% in shape, 4.1% in size, 34.5% in eruption, 26.4% in structure and 17.4% had more than one DA. No association was found between DA and sex, but DA was significantly associated to malocclusion (p<0.05); 3) there was no association between sex or facial type between the measures of nasal-labial angle, position and effective maxillary length, effective mandibular length and the sagittal relationship between the molars, overjet and overbite, position of upper incisors, lower incisors and between the incisors themselves. There was a difference between sex, on the VERT index and in lower anterior facial height, upper incisor inclination and line-H, between facial types for the occlusal plane angles, mandibular plane, facial axis, lower incisor inclination, mandibular position, upper incisor position, lower anterior facial height, ANB and line-H. It was concluded that: 1) the most prevalent occlusal type was class I malocclusion, with no distinction for sex or age group, and the assessment of occlusal characteristics showed that excessive overbite and overjet were the most predominant findings, along with a high occurrence of tooth crowding; 2) a high prevalence of DA was found, particularly eruption anomalies, not influenced by sex but significantly associated to malocclusion and 3) individuals from Ceará are predominantly brachyfacial, exhibiting a number of similarities inherent to their facial pattern, such as a convex profile, retracted jaw, reduced lower third and protruded lower incisors. This study was multidisciplinary, involving researchers from the areas of epidemiology, radiology and dentistry, thereby meeting the multidisciplinarity requirements of the Postgraduate Program in Health Sciences

O tratamento ortodôntico em uma perspectiva a longo prazo: avaliação da estabilidade oclusal e do grau de satisfação dos pacientes

This study aimed to evaluate factors associated to orthodontic treatment stability and patient satisfaction in the long-term. A total of 209 patients (88 class I and 121 class II) treated with straight wire fixed appliance were selected at least 5 years post treatment. Six hundred twenty seven dental casts were examined with the PAR Index at pretreatment (T1), end of treatment (T2), and at long-term follow up (T3, mean 8.5 years post treatment). At T3, a Dental Impact on Daily Living questionnaire was used to assess patient satisfaction with the dentition in the long-term. Friedman test and multiple regression analysis were used to evaluate changes among the time points and factors associated with stability and patient satisfaction. Predictive factors used to exam the occlusion were: PAR Index at T1 and T2, age at T1, the amount of time without retainer, length of Hawley retainer wear, length of follow-up, sex, extraction and third molar status. To assess patient satisfaction were considered: changes produced by the orthodontic treatment (PAR T2-T1), post treatment stability (PAR T3), age at the start of treatment (T1), length of treatment (T2-T1), gender, and extraction. Orthodontic treatment produced a significant improvement of 94.2% in the PAR Index (T2-T1), but this change was not associated with the level of satisfaction when the patient was questioned at T3. No significant change was observed between T2 and T3. However, when the sample was divided according to the level of finalization (PAR T2), it was observed that well-finished patients experienced some deterioration (P<.001), whereas the less well-finished ones showed some improvement (P<.05). Even with the deterioration, the well-finished patients still had a better PAR Index at T3 compared to the less well-finished ones (PAR T2- T3). Regression analysis showed that PAR Index at T1 and T2, age at T1, and length of retainer wear had a slight association with occlusal stability (R2 = 0.27). Patient satisfaction was significantly associated only with PAR Index at T3 (r2=0.125, P<.0001). We can conclude that, even thought orthodontic treatment is quite stable, not so well-finished treatments tend to show some improvement and well-finished ones deteriorate some in the long-term. Despite of that, well-finished patients still have better occlusal characteristics. Patient satisfaction is not related to the result of orthodontic treatment; nevertheless, there is a slight association with dentition in the long-term

Avaliação da eficácia de selante ionomérico modificado por resina e escovação dentária na preservação de cárie oclusal

The purpose of this study was to evaluate the effectiveness during a twelve-month period, of resin-modified glass ionomer (Vitremer@) used as fissure sealants compared to supervised teeth brushing in the prevention of oclusal caries in permarient molars of pubIlc school children from 5 to 7 years of age. A total of 91 children participated in the study, being randomly divided up into three groups of investigation: group with sealant (n=31), group of supervised brushing (m=30), and control gorup (n=30). After 12 months, a total of 28.5% of tosses in the sample of 26 children was registered, and although there wasn t a significant diference between these losses and the groups studles (p = 0.6355), there was a considerable reduction in the sample. The results showed that none of the independentIy studied variables (present caries experience, biofilm, bleeding, sealant retention, position of the tooth in the arch, and sex) interfered in the final results, and that there was no significant difference between applying the sealant in question, perfornling supervised dental brushing, or not intervening at alI (p=0.542). These results could have been a consequence of the limitations found alI through the study, especially relating to the losses occurred because of school evasion, transfer, or because of the accident in the Marise Paiva Municipal School, Keeping students away for approximately one semester, so tht a new reseach had to be developed sos as to better clarify the effects among the treatments done there

Avaliação clínica e comparativa da oclusão balanceada bilateral e desoclusão com guia canino sobre a função mastigatória de usuários de prótese total removível

The maintenance of masticatory function is especially important for patients who wear complete dentures due to the limitations of this type of prosthesis. Thus, the bilateral balanced occlusion (BBO) is used to achieve, besides other advantages, greater masticatory efficiency. However, analyzing critically the literature, it is observed that there is not enough scientific evidence that support the BBO as the most appropriate occlusal concept in complete dentures. This way, the purpose of the present study was to verify if complete dentures wearers with BBO present better masticatory efficiency and capacity than those with canine guidance (CG). A double-blind controlled crossover clinical trial was conducted. The sample was made of 24 completely edentulous patients. The subjects wore sets of complete dentures with both occlusal concepts for equal periods of 3 months. Objective data were collected through the masticatory efficiency test, performed by the colorimetric method, in which capsules of a synthetic material enclosing fuchsine- containing granules were used. Subjective data were recorded by patient´s ratings of their chewing function, which is the masticatory ability. No significant statistical difference was found for masticatory efficiency (p=0,0952) and masticatory ability (x2=0,5711/ p=0,4498) between the two occlusal concepts studied, as well as there was no correlation between these two variables (p=0,2985). Based on these results, it seems reasonable to use CG for the setup of complete dentures, since it is an easier and quicker technical procedure, until that future researches can come to complement this question

Avaliação clínica da relação entre o índice de placa, índice gengival, alinhamento dental, mucosa ceratinizada, tipo de periodonto e distúrbios oclusais com a ocorrência de recessão gengival

This study clinically evaluated the relationship of gingival recessions with the periodontal index of gingival and plaque, dental alignment, keratinized mocous, type of periodontal, and occlusal disorders. Study participants were individuals aged between 19 and 33 years. The evaluations were performed by using questionnaires and clinical examinations. In subjects examined, the teeth were assessed and divided into groups (Molars, premolars, canines and incisors). The gingival recession were measured in the central region of the teeth and individuals were subject to disclosure to the plate and observing the poll of plaque and gingival index, respectively. 558 teeth were examined, with 24.1%, 135 had gingival recession greater than or equal to 1mm. Through the combination of tests used to evaluate the average of the recession and its relationship with the variables studied, we observed that the degree of recession of the elements assessed dental showed, almost for the most part, when higher values associated with the index plaque (p = 0.101), Gingival Index (p = 0.053), dental alignment (p = 0.962), width of keratinized mocous (p = 0.004) and type of periodontium (p = 0.033), however statistically significant difference could only be considered when related the recessions in the keratinized mocous and the type of the periodontium. Although we identify, when we evaluate the whole set of teeth that occlusal disturbances (p = 0.002) were more strongly associated with cases of gum recession that the gingival index (p = 0.006), however, these two conditions were correlated with the cases of recession, contributing to its occurrence

Qualidade de vida, eficiência mastigatória e presença de disfunção temporomandibular em usuários de prótese parcial removível com arco dental curto inferior

Even nowadays there is in Brasil a large number of edentulous and a precarious financial condition of most of the population. In addition, World Health Organization aims for oral health, which consists on the maintenance of a natural dentition, functional and aesthetic composed of at least 20 teeth, without need of prosthetic intervention throughout life. From this and considering the lack of researches about the permanence of edentulous spaces in the oral cavity, and also avoiding overtreatment, this research has been proposed. Thus, the aim was to evaluate the effect of different lengths of the shortened lower dental arch in the presence or absence of a removable partial denture (RPD) on masticatory function, quality of life and occurrence of temporomandibular dysfunction. To achieve this goal, we compared the masticatory efficiency (colorimetric test), the oral comfort through the analysis of the impact of oral health in quality of life (OHIP-14), the presence of temporomandibular dysfunction (RDC/TMD) and the general quality of life (WHOQOL) of patients with shortened dental arches (SDA) (n=60), which is an arch with a reduction of teeth starting posteriorly, and patients with complete dental arch (Complete DA) (n = 34). The group of patients whit SDA was divided among PPR wears (PPD + SDA) (n = 17) and non-wears (n = 43). The population of this study consisted on patients who received or looked for treatment at the clinics of the Department of Dentistry of UFRN, from clinical analysis and records. The sample was chosen by convenience. For statistical analysis, it was a database in SPSS 17.0, followed by descriptive analysis with frequencies, absolute values, tests of central tendency and variability. The statistical tests used were chi-squared and analysis of variance as well as Tukey s post test, when applicable, all with a 95% confidence level. The results shown a prevalence of TMD of 47,1% among patients using PRP and 69,8% among those who didn t, but this result wasn t statistically significant. The mean of the results of masticatory efficiency, WHOQOL and OHIP didn t show association to the presence or absence of PPR and to the lower number of occlusal units of the patients (0, 1, 2 or more occlusal). The association only occurred among the different groups of SDA and the patients with complete dental arch. Taking into account the results, it could be observed that studied patients with low posterior support using lower PRP didn t have better masticatory efficiency, general quality of life, less impacts of their oral conditions in quality of life or not even less temporomandibular dysfunction or better masticatory efficiency when compared to those who didn t use the prosthesis