Zero-valent iron mediated degradation of ciprofloxacin - Assessment of adsorption, operational parameters and degradation products

The zero-valent iron (ZVI) mediated degradation of the antibiotic ciprofloxacin (CIP) was studied under oxic condition. Operational parameters such as ZVI concentration and initial pH value were evaluated. Increase of the ZVI concentration from 1 to 5 g L−1 resulted in a sharp increase of the observed pseudo-first order rate constant of CIP degradation, reaching a plateau at around 10 g L−1. The contribution of adsorption to the overall removal of CIP and dissolved organic carbon (DOC) was evaluated after a procedure of acidification to pH 2.5 with sulfuric acid and sonication for 2 min. Adsorption increased as pH increased, while degradation decreased, showing that adsorption is not important for degradation. Contribution of adsorption was much more important for DOC removal than for CIP. Degradation of CIP resulted in partial defluorination since the fluoride measured corresponded to 34% of the theoretical value after 120 min of reaction. Analysis by liquid chromatography coupled to mass spectrometry showed the presence of products of hydroxylation on both piperazine and quinolonic rings generating fluorinated and defluorinated compounds as well as a product of the piperazine ring cleavage.

Produção de lacases pelo fungo filamentoso de origem marinha Peniophora sp. CBMAI 1063 em biorreator de bancada

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Thermal effects and morphological aspects of human dentin surface irradiated with different frequencies of Er:YAG laser

This study reports the effects on micromorphology and temperature rise in human dentin using different frequencies of Er:YAG laser. Sixty human dentin fragments were randomly assigned into two groups (n = 30): carious or sound dentin. Both groups were divided into three subgroups (n = 10), according to the Er:YAG laser frequency used: 4, 6, or 10 Hz (energy: 200 mJ; irradiation distance: 12 mm; and irradiation time: 20 s). A thermocouple adapted to the tooth fragment recorded the initial temperature value (degrees C); then, the temperature was measured after the end of the irradiation (20 s). Morphological analysis was performed using images obtained with scanning electron microscope. There was no difference between the temperatures obtained with 4 and 6 Hz; the highest temperatures were achieved with 10 Hz. No difference was observed between carious and sound dentin. Morphological analyses revealed that all frequencies promoted irregular surface in sound dentin, being observed more selectively ablation especially in intertubular dentin with tubule protrusion. The caries dentin presented flat surface for all frequencies used. Both substrates revealed absence of any signs of thermal damage. It may be concluded that the parameters used in this study are capable to remove caries lesion, having acceptable limits of temperature rise and no significant morphological alterations on dentin surface. Microsc. Res. Tech. 2012. (c) 2012 Wiley Periodicals, Inc.

Effect of pH-induced nanopowder deagglomeration on sintering, microstructure and dielectric properties of Ba0.77Ca0.23TiO3 ceramics

Ba0.77Ca0.23TiO3 ceramics were produced in this work starting from nanopowders synthesized via a polymeric precursor method. By adjusting the pH values of the precursor solutions above 7, it was possible to prepare powders weakly aggregated and with a smaller particle size, both facts which traduced into an enhanced nanopowders' sintering process at comparatively lower temperatures. Irrespective of the initial pH value, highly-dense and second phase-free ceramics were obtained following optimal sintering parameters (temperature and time) extracted from dilatometric and density measurements. By considering these and other sintering conditions, moreover, polycrystalline materials with an average grain size varying from 0.35 to 8 mm were produced, the grain growth process involving liquid phase-assisted sintering for heat treatments achieved at 1320 °C. The study of grain size effects on the ferroelectric properties of these materials was conducted, the results being discussed in the light of previous debates, including grain size-dependent degree of tetragonal distortion in such materials, as verified in this work.

Decision-Making Processes in Voluntary Football Clubs in Relation to External Counselling

Introduction Recruiting and retaining volunteers who are prepared to make a long-term commitment is a major problem for Swiss sports clubs. With the inclusion of external counselling for the change and systematisation of volunteer management, sports clubs have a possibility to develop and defuse problems in spite of existing barriers and gaps in knowledge. To what extent is external counselling for personnel problems effective? It is often observed that standardised counselling inputs lead to varying consequences for sports clubs. It can be assumed that external impulses are interpreted and transformed differently into the workings of the club. However, this cannot be solely attributed to the situational or structural conditions of the clubs. It is also important to consider the underlying decision-making processes of a club. According to Luhmann’s organisational sociological considerations (2000), organisations (sports clubs) have to be viewed as social systems consisting of (communicated) decisions. This means that organisations are continually reproduced by decision-making processes. All other (observable) factors such as an organisation’s goals, recruiting strategies, support schemes for volunteers etc., have to be seen as an outcome of the operation of prior organisational decisions. Therefore: How do decision-making processes in sports clubs work in the context of the implementation of external counselling? Theoretical Framework An examination of the actual situation in sports clubs shows that decisions frequently appear to be shaped by inconsistency, unexpected outcomes, and randomness (Amis & Slack, 2003). Therefore, it must be emphasised that these decisions cannot be analysed according to any rational decision-making model. Their specific structural characteristics only permit a limited degree of rationality – bounded rationality. Non-profit organisations in particular are shaped by a specific mode of decisionmaking that Cohen, March, and Olsen (1972) have called the “garbage can model”. As sport clubs can also be conceived as “organised anarchies”, this model seems to offer an appropriate approach to understanding their practices and analysing their decision-making processes. The key concept in the garbage can model is the assumption that decision-making processes in organisations consist of four “streams”: (a) problems, (b) actors, (c) decision-making opportunities, and (d) solutions. Method Before presenting the method of the analysis of the decision-making processes in sports clubs, the external counselling will be described. The basis of the counselling is generated by a sports clubs’ capability to change. Due to the specific structural characteristics and organisational principles, change processes in sports clubs often merge with barriers and restrictions. These need to be considered when developing counselling guidelines for a successful planning and realisation of change processes. Furthermore, important aspects of personnel management in sports clubs and especially volunteer management must be implied in order to elaborate key elements for the counselling to recruit new volunteers (e.g., approach, expectations). A counselling of four system-counselling workshops was conceptualised by considering these specific characteristics. The decision-making processes in the sports clubs were analysed during the counselling and the implementation process. A case study is designed with the appropriate methodological approach for such explorative research. The approach adopted for these single case analyses was oriented toward the research program of behavioural decision-making theory (garbage can model). This posits that in-depth insights into organisational decision-making processes can only be gained through relevant case studies of existing organisational situations (Skille, 2013). Before, during and after the intervention, questionnaires and guided interviews were conducted with the project teams of the twelve par-ticipating football clubs to assess the different components of the “streams” in the context of external counselling. These interviews have been analysed using content analysis following guidelines as for-mulated by Mayring (2010). Results The findings show that decision-making processes in football clubs occur differently in the context of external counselling. Different initial positions and problems are the triggers for these decision-making processes. Furthermore, the implementation of the solutions and the external counselling is highly dependent on the commitment of certain people as central players within the decision-mak-ing process. The importance of these relationships is confirmed by previous findings in regard to decision-making and change processes in sports clubs. The decision-making processes in sports clubs can be theoretically analysed using behavioural decision-making theory and the “garbage can model”. Bounded rationality characterises all “streams” of the decision-making processes. Moreo-ver, the decision-making process of the football clubs can be well illustrated in the framework, and the interplay of the different dimensions illustrates the different decision-making practices within the football clubs. References Amis, J., & Slack, T. (2003). Analysing sports organisations: Theory and practice. In B. Houlihan (Eds.), Sport & Society (pp. 201–217). London, England: Sage. Cohen, M.D., March, J.G., & Olsen, J.P. (1972). A garbage can model of organisational choice. Ad-ministrative Science Quarterly, 17, 1-25. Luhmann, N. (2000). Organisation und Entscheidung. Opladen: Westdeutscher Verlag. Mayring, P. (2010). Qualitative Inhaltsanalyse. Grundlagen und Techniken. Weinheim: Beltz. Skille, E. Å. (2013). Case study research in sport management: A reflection upon the theory of science and an empirical example. In S. Söderman & H. Dolles (Eds.), Handbook of research on sport and business (pp. 161–175). Cheltenham, England: Edward Elgar.

Changes in serum lipids with change and fluctuation in body mass index and body fat distribution in Mexican Americans with type 2 diabetes

This dissertation was written in the format of three journal articles. Paper 1 examined the influence of change and fluctuation in body mass index (BMI) over an eleven-year period, on changes in serum lipid levels (total, HDL, and LDL cholesterol, triglyceride) in a population of Mexican Americans with type 2 diabetes. Linear regression models containing initial lipid value, BMI and age, BMI change (slope of BMI), and BMI fluctuation (root mean square error) were used to investigate associations of these variables with change in lipids over time. Increasing BMI over time was associated with gains in total and LDL cholesterol and triglyceride levels in women. Fluctuation of BMI was not associated with detrimental lipid profiles. These effects were independent of age and were not statistically significant in men. In Mexican-American women with type 2 diabetes, weight reduction is likely to result in more favorable levels of total and LDL cholesterol and triglyceride, without concern for possible detrimental effects of weight fluctuation. Weight reduction may not be as effective in men, but does not appear to be harmful either. ^ Paper 2 examined the associations of upper and total body fat with total cholesterol, HDL and LDL cholesterol, and triglyceride levels in the same population. Multilevel analysis was used to predict serum lipid levels from total body fat (BMI and triceps skinfold) and upper body fat (subscapular skinfold), while controlling for the effects of sex, age and self-correlations across time. Body fat was not strikingly associated with trends in serum lipid levels. However, upper body fat was strongly associated with triglyceride levels. This suggests that loss of upper body fat may be more important than weight loss in management of the hypertriglyceridemia commonly seen in type 2 diabetes. ^ Paper 3 was a review of the literature reporting associations between weight fluctuation and lipid levels. Few studies have reported associations between weight fluctuation and total, LDL, and HDL cholesterol and triglyceride levels. The body of evidence to date suggests that weight fluctuation does not strongly influence levels of total, LDL and HDL cholesterol and triglyceride. ^

The impact of nutrition intervention on glycemic control in a pediatric type 1 diabetes mellitus population

Aim: The goal of this study was to evaluate the change in hemoglobin A1C and glycemic control after nutrition intervention among a population of type 1 diabetic pediatric patients. Methods: Data was collected from all type 1 diabetic patients who were scheduled for a consultation with the diabetes/endocrine RD from January 2006 through December 2006. Two groups were compared, those who kept their RD appointment and those who did not keep their appointment. The main outcome measure was HgbA1C. An independent samples t-test compared the two groups with respect to change in HbgA1C before and after the most recent scheduled appointment with the RD. Baseline characteristics were used as covariates and analyzed and controlled for using analysis of covariance (ANCOVA). Results: There was no difference in HgbA1c after either attending an RD appointment or not having attended an RD appointment. Those who arrived for and attended their RD appointment and those who did not arrive for and attend their RD appointment, had statistically different HgbA1C's before their scheduled appointment as well as after the RD appointment. However, the two groups were not equal at the beginning of the study period. Discussion: A study design with inclusion criteria of a specified range of HgbA1C values within which the study subjects needed to fall, would have potentially eliminated the difference between the two groups at the beginning of the study period. Conducting either another retrospective study that controlled for the initial HgbA1C value or conducting a prospective study that designated a range of HgbA1C values would be worth investigating to evaluate the impact of medical nutrition therapy intervention and the role of the RD in diabetes management. It is an interesting finding that there was a significant difference in the initial HgbA1c for those who came to the RD appointment compared to those who did not come. The fact that in this study those who did not arrive for their RD appointment had worse control of their diabetes suggests that this is a high-risk group. Targeting diabetes education toward this group of patients may prove to be beneficial. ^

A mathematical framework for finite strain elastoplastic consolidation. Part 1: Balance laws, variational formulation, and linearization

A mathematical formulation for finite strain elasto plastic consolidation of fully saturated soil media is presented. Strong and weak forms of the boundary-value problem are derived using both the material and spatial descriptions. The algorithmic treatment of finite strain elastoplasticity for the solid phase is based on multiplicative decomposition and is coupled with the algorithm for fluid flow via the Kirchhoff pore water pressure. Balance laws are written for the soil-water mixture following the motion of the soil matrix alone. It is shown that the motion of the fluid phase only affects the Jacobian of the solid phase motion, and therefore can be characterized completely by the motion of the soil matrix. Furthermore, it is shown from energy balance consideration that the effective, or intergranular, stress is the appropriate measure of stress for describing the constitutive response of the soil skeleton since it absorbs all the strain energy generated in the saturated soil-water mixture. Finally, it is shown that the mathematical model is amenable to consistent linearization, and that explicit expressions for the consistent tangent operators can be derived for use in numerical solutions such as those based on the finite element method.

Latent hardening size effect in small-scale plasticity

We aim at understanding the multislip behaviour of metals subject to irreversible deformations at small-scales. By focusing on the simple shear of a constrained single-crystal strip, we show that discrete Dislocation Dynamics (DD) simulations predict a strong latent hardening size effect, with smaller being stronger in the range [1.5 µm, 6 µm] for the strip height. We attempt to represent the DD pseudo-experimental results by developing a flow theory of Strain Gradient Crystal Plasticity (SGCP), involving both energetic and dissipative higher-order terms and, as a main novelty, a strain gradient extension of the conventional latent hardening. In order to discuss the capability of the SGCP theory proposed, we implement it into a Finite Element (FE) code and set its material parameters on the basis of the DD results. The SGCP FE code is specifically developed for the boundary value problem under study so that we can implement a fully implicit (Backward Euler) consistent algorithm. Special emphasis is placed on the discussion of the role of the material length scales involved in the SGCP model, from both the mechanical and numerical points of view.

Latent hardening size effect in small-scale plasticity

We aim at understanding the multislip behaviour of metals subject to irreversible deformations at small-scales. By focusing on the simple shear of a constrained single-crystal strip, we show that discrete Dislocation Dynamics (DD) simulations predict a strong latent hardening size effect, with smaller being stronger in the range [1.5 µm, 6 µm] for the strip height. We attempt to represent the DD pseudo-experimental results by developing a flow theory of Strain Gradient Crystal Plasticity (SGCP), involving both energetic and dissipative higher-order terms and, as a main novelty, a strain gradient extension of the conventional latent hardening. In order to discuss the capability of the SGCP theory proposed, we implement it into a Finite Element (FE) code and set its material parameters on the basis of the DD results. The SGCP FE code is specifically developed for the boundary value problem under study so that we can implement a fully implicit (Backward Euler) consistent algorithm. Special emphasis is placed on the discussion of the role of the material length scales involved in the SGCP model, from both the mechanical and numerical points of view.

Efficient computation of current collection in bare electrodynamic tethers in and beyond OML regime

One key issue in the simulation of bare electrodynamic tethers (EDTs) is the accurate and fast computation of the collected current, an ambient dependent operation necessary to determine the Lorentz force for each time step. This paper introduces a novel semianalytical solution that allows researchers to compute the current distribution along the tether efficient and effectively under orbital-motion-limited (OML) and beyond OML conditions, i.e., if tether radius is greater than a certain ambient dependent threshold. The method reduces the original boundary value problem to a couple of nonlinear equations. If certain dimensionless variables are used, the beyond OML effect just makes the tether characteristic length L ∗ larger and it is decoupled from the current determination problem. A validation of the results and a comparison of the performance in terms of the time consumed is provided, with respect to a previous ad hoc solution and a conventional shooting method.

A gradient-enhanced large-deformation continuum damage model for fibre-reinforced materials

A non-local gradient-based damage formulation within a geometrically non-linear setting is presented. The hyperelastic constitutive response at local material point level is governed by a strain energy which is additively composed of an isotropic matrix and of an anisotropic fibre-reinforced material, respectively. The inelastic constitutive response is governed by a scalar [1–d]-type damage formulation, where only the anisotropic elastic part is assumed to be affected by the damage. Following the concept in Dimitrijević and Hackl [28], the local free energy function is enhanced by a gradient-term. This term essentially contains the gradient of the non-local damage variable which, itself, is introduced as an additional independent variable. In order to guarantee the equivalence between the local and non-local damage variable, a penalisation term is incorporated within the free energy function. Based on the principle of minimum total potential energy, a coupled system of Euler–Lagrange equations, i.e., the balance of linear momentum and the balance of the non-local damage field, is obtained and solved in weak form. The resulting coupled, highly non-linear system of equations is symmetric and can conveniently be solved by a standard incremental-iterative Newton–Raphson-type solution scheme. Several three-dimensional displacement- and force-driven boundary value problems—partially motivated by biomechanical application—highlight the mesh-objective characteristics and constitutive properties of the model and illustratively underline the capabilities of the formulation proposed

Modelo computacional para avaliação do desempenho hidrodinâmico de embarcações de planeio em águas calmas.

Em geral, uma embarcação de planeio é projetada para atingir elevados níveis de velocidade. Esse atributo de desempenho está diretamente relacionado ao porte da embarcação e à potência instalada em sua planta propulsiva. Tradicionalmente, durante o projeto de uma embarcação, as análises de desempenho são realizadas através de resultados de embarcações já existentes, retirados de séries sistemáticas ou de embarcações já desenvolvidas pelo estaleiro e/ou projetista. Além disso, a determinação dos atributos de desempenho pode ser feita através de métodos empíricos e/ou estatísticos, onde a embarcação é representada através de seus parâmetros geométricos principais; ou a partir de testes em modelos em escala reduzida ou protótipos. No caso específico de embarcações de planeio, o custo dos testes em escala reduzida é muito elevado em relação ao custo de projeto. Isso faz com que a maioria dos projetistas não opte por ensaios experimentais das novas embarcações em desenvolvimento. Ao longo dos últimos anos, o método de Savitsky foi largamente utilizado para se realizar estimativas de potência instalada de uma embarcação de planeio. Esse método utiliza um conjunto de equações semi-empíricas para determinar os esforços atuantes na embarcação, a partir dos quais é possível determinar a posição de equilíbrio de operação e a força propulsora necessária para navegar em uma dada velocidade. O método de Savitsky é muito utilizado nas fases iniciais de projeto, onde a geometria do casco ainda não foi totalmente definida, pois utiliza apenas as características geométricas principais da embarcação para realização das estimativas de esforços. À medida que se avança nas etapas de projeto, aumenta o detalhamento necessário das estimativas de desempenho. Para a realização, por exemplo, do projeto estrutural é necessária uma estimativa do campo de pressão atuante no fundo do casco, o qual não pode ser determinado pelo método de Savitsky. O método computacional implementado nesta dissertação, tem o objetivo de determinar as características do escoamento e o campo de pressão atuante no casco de uma embarcação de planeio navegando em águas calmas. O escoamento é determinado através de um problema de valor de contorno, no qual a superfície molhada no casco é considerada um corpo esbelto. Devido ao uso da teoria de corpo esbelto o problema pode ser tratado, separadamente, em cada seção, onde as condições de contorno são forçadamente respeitadas através de uma distribuição de vórtices.

A new analytical solution for water table fluctuations in coastal aquifers with sloping beaches

The Boussinesq equation appears as the zeroth-order term in the shallow water flow expansion of the non-linear equation describing the flow of fluid in an unconfined aquifer. One-dimensional models based on the Boussinesq equation have been used to analyse tide-induced water table fluctuations in coastal aquifers. Previous analytical solutions for a sloping beach are based on the perturbation parameter, epsilon(N) = alphaepsilon cot beta (in which beta is the beach slope, alpha is the amplitude parameter and epsilon is the shallow water parameter) and are limited to tan(-1) (alphaepsilon) much less than beta less than or equal to pi/2. In this paper, a new higher-order solution to the non-linear boundary value problem is derived. The results demonstrate the significant influence of the higher-order components and beach slope on the water table fluctuations. The relative difference between the linear solution and the present solution increases as 6 and a increase, and reaches 7% of the linear solution. (C) 2003 Elsevier Ltd. All rights reserved.

Partial regularity of weak solutions of the liquid crystal equilibrium system

For a parameter, we consider the modified relaxed energy of the liquid crystal system. Each minimizer of the modified relaxed energy is a weak solution to the liquid crystal equilibrium system. We prove the partial regularity of minimizers of the modified relaxed energy. We also prove the existence of infinitely many weak solutions for the special boundary value x.