Quantification of cellulase activity using cellulose-azure

Despite wide application of cellulose-azure as a substrate for measuring cellulase activity, there is no quantification of hydrolysis rate or enzymatic activities using this substrate. The aim of this study was to quantify the hydrolysis rate in terms of product formation and dye released using cellulose-azure. The amount of dye released was correlated with the production of glucose and the enzyme concentrations. It is shown that the lack of correlation can be due to (1) repression of the release of the azure-dye when azure-dye accumulates, (2) presence of degradable substrates in the cellulase powder which inflate the glucose measurements and (3) the degradation of cellulose which is not linked to the dye in the cellulose-azure. Based on the lack of correlation, it is recommended that cellulose-azure should only be applied in assays when the aim is to compare relative activities of different enzymatic systems. (c) 2005 Elsevier B.V. All rights reserved.

Effect of aspect ratio on thermal convection in open and closed systems

Internally heated fluids are found across the nuclear fuel cycle. In certain situations the motion of the fluid is driven by the decay heat (i.e. corium melt pools in severe accidents, the shutdown of liquid metal reactors, molten salt and the passive control of light water reactors) as well as normal operation (i.e. intermediate waste storage and generation IV reactor designs). This can in the long-term affect reactor vessel integrity or lead to localized hot spots and accumulation of solid wastes that may prompt local increases in activity. Two approaches to the modeling of internally heated convection are presented here. These are based on numerical analysis using codes developed in-house and simulations using widely available computational fluid dynamics solvers. Open and closed fluid layers at around the transition between conduction and convection of various aspect ratios are considered. We determine optimum domain aspect ratio (1:7:7 up to 1:24:24 for open systems and 5:5:1, 1:10:10 and 1:20:20 for closed systems), mesh resolutions and turbulence models required to accurately and efficiently capture the convection structures that evolve when perturbing the conductive state of the fluid layer. Note that the open and closed fluid layers we study here are bounded by a conducting surface over an insulating surface. Conclusions will be drawn on the influence of the periodic boundary conditions on the flow patterns observed. We have also examined the stability of the nonlinear solutions that we found with the aim of identifying the bifurcation sequence of these solutions en route to turbulence.

Qualidade do solo da camada de cobertura final em área de disposição de resíduos no semiárido tropical

The final disposal of municipal solid waste in unsuitable areas without an infrastructure that meets the health measures and environmental protection, coupled with the lack of technical criteria in phase and decommissioning of the dump can promote environmental degradation. Alternatively to minimize the impacts of this activity for the stabilization of the area by isolating the massive waste with implementation of an adequate and finished by a layer of soil for plant growth final cover system. In this context, the present study aimed to evaluate the quality of the final cover in the area of a disabled dump the tropical semi-arid region in order to assist the process of recovery of these areas. The study area is located in the tropical semi-arid region in São João do Sabugi /RN. Soil samples were collected in the dump area and bushland as a benchmark of quality. To which they were subjected to analysis of physical attributes (particle density, bulk density, grain size and porosity), chemical properties (pH, K + , Na+ , Ca2 + , Mg2 + and Al3 + exchangeable, potential acidity, available phosphorus, sum of bases, CEC, base saturation, aluminum saturation, saturation Na + and adsorption ratio sodium, total organic carbon and total nitrogen) and total and soluble concentrations of heavy metals (Mn, Pb, Zn, Cd, Cu, Mo, Co, Cr, Ba and Ni). The differences between physical and chemical soil under native forest and final cover showing reduction of soil quality in the area off to the dump, which hinders the development of native vegetation and the recovery of the area. The absence of superior waterproofing to allow vertical transfer between the solid waste and the final cover promoted enrichment by chemical elements and heavy metals in excess can impair revegetation. Deficiencies found in the construction process of the final cover point to the need for intervention to accelerate the process of stabilization and recovery of the area of the local ecosystem

Tratamento de cascalho de perfuração utilizando sistemas microemulsionados

The oil industry is one of the activities that generates more waste to the environment. The drill cuttings is a waste generated in large quantities in the drilling process and that may cause environmental damage such as soil contamination and consequently the contamination of groundwater if disposed of without prior treatment. Arises the need to develop scientific activities and research ways to adapt these wastes the current environmental standards. In the case of solid wastes, the NBR 10004: 2004 of the Brazilian Association of Technical Standards (ABNT) classifies them into class I waste (hazardous) and class II (not dangerous), which determines which wastes may or may not be discarded in the environment without causing environmental impact. This study presents a novel alternative for treating drill cuttings, where this waste was classified as class I (Abreu & Souza, 2005), mainly by removing the n-paraffin present in it, since this arises when using drilling fluids base oil. Using microemulsion systems promotes the removal of this contaminant drill cuttings samples from wells located in Alto do Rodrigues - RN. Initially, we determined the concentration of paraffin using infrared method in samples were extracted with ultrasound, we obtained a paraffin concentration in the range from 36.59 to 43.52 g of paraffin per kilogram of cuttings. Used two microemulsion systems containing two nonionic surfactants from different classes, one is an alcohol ethoxylated (UNTL-90) and the other an nonylphenol ethoxylated (RNX 110). The results indicated that the system UNTL-90 surfactant has better efficiency than the system with RNX 110. The study of the influence of contact time at the extraction showed that for times greater than 25 minutes has a tendency to increase the percentage extraction with increasing contact time. It was also observed that the extraction is fast because at 1 minute contact has 22.7% extraction. The reuse of the microemulsion system without removing the paraffin extracted in previous steps, showed reduction of 29.32 in percentage of extraction by comparing the first and third extraction, but by comparing the first and second extractions reduction is 8.5 in percentage extraction, so the systems reuse optimization can be an option for economically viable removing paraffin from cuttings. The extraction with shaking is more effective in the treatment of cuttings, reaching the extraction percentage of 87.04%, that is, obtaining a drill cuttings with 0.551% paraffin. Using the percentage of paraffin employed in non-aqueous drilling fluids and fluid maximum limit on cuttings for disposal established by the Environmental Protection Agency of the United States (US EPA), one arrives at the conclusion that the level of paraffin on gravel cannot exceed 3.93%. Conclude that the amount of paraffin in the treated cuttings with the microemulsion system with shaking is below the established by US EPA, showing that the system used was efficient in removing the paraffin from the drill cuttings.

Inclusão social de catadores de materiais recicláveis: estudo da política nacional de resíduos sólidos e da efetivação do trabalho decente em Natal/RN

The integrated management of municipal solid waste in Brazil is held legally responsible by the city council administration. This is done since the year 2010 with the publication of the National Solid Waste Policy term. According to the policy and law, each city must encourage the implementation of selective collection and the participation of waste picker´s entities aiming social inclusion. However, these actions haven’t yet reached its legal aims. These workers are considered regarding collection actions but are stripped of certain basic labor rights not in conformation with the Decent Work concept. This type of work, according to International Labour Organization, must be seen as work that is properly paid for and must be done regarding conditions of freedom, equity, security and able to provide workers with a dignified life conditions. Thus, this work aims to investigate the implementation process regarding the Solid Waste National Policy in Natal-Rio Grande do Norte in Brazil. This is done considering socio-productive insertion of recyclable material collectors. The research is substantiated by a qualitative approach as well as documental and bibliographical research. A field research considering the cooperatives as well “in locco" observation and semi-structured interviews were carried out between the time span of 2013 and 2014. In order to investigate decent daily working conditions the research emphasized municipal management actions in Natal towards social inclusion that aim to reflect on the progress and difficulties experimented. It is seen that even when these cooperatives receive government support there are still important struggles that need to be overcome. The worker´s tasks are risky, the work environment in not safe or is adequate in terms of health issues. There is the stigma of it being considered an occupational task, the low individual income distancing the activity regarding parameters of the Green Employment and Decent Work concept. On the other hand, the survey showed potential as the relentless pursuit on behalf of the cooperatives that still search better work condition improvement.

Auditoria e identificação de propostas de melhoria no SGA da Funfrap

O compromisso das organizações com as obrigações decretadas ao nível do ambiente, segurança e qualidade emancipa a implementação de Sistemas de Gestão e o processo de auditar. Neste trabalho, decorrente do estágio curricular no âmbito do Mestrado em Engenharia do Ambiente, está evidenciada a importância dos Sistemas de Gestão Ambiental e as razões preponderantes para que sejam auditados. O trabalho pretendeu auditar e avaliar a conformidade do sistema de gestão ambiental, de acordo com a NP EN ISO 14001:2004, de uma indústria de fundição de metais, Funfrap -. Fundição Portuguesa SA, a fim de identificar oportunidades de melhoria no desempenho ambiental da organização. No âmbito do estágio foram ainda realizadas outras atividades, incluindo campanhas de sensibilização, inventário de resíduos sólidos, ferramentas da metodologia World Class Manufacturing, formação sobre a separação de resíduos nos postos de trabalho, acompanhamento de um ensaio na estação de tratamento de águas residuais industriais e apoio para o desenvolvimento do relatório ambiental anual. Da auditoria interna identificaram-se e corrigiram-se nove não conformidades menores e cinco observações. Da auditoria externa foram identificadas apenas duas não conformidades, nenhuma delas relacionadas com as detetadas anteriormente. Além deste resultado foram sugeridas algumas medidas para alcançar um melhor desempenho ambiental da organização.

Produção de biopolímeros por culturas microbianas mistas selecionadas

Com a realização deste trabalho, pretendeu-se efetuar uma seleção de culturas mistas em reatores semi-descontínuos (SBR) com capacidade de acumulação de polihidroxialcanoatos (PHA). Para a seleção de culturas foram utilizados inóculos provenientes de diferentes Estações de Tratamento de Águas Residuais (ETAR) e ácidos orgânicos voláteis (AOV) como fonte de carbono. Foram testadas diferentes condições como a proveniência do inóculo, as cargas orgânicas aplicadas e a seleção de culturas utilizando soro de queijo. Verificaram-se elevadas remoções da CQO (acima de 90%) em grande parte dos ensaios realizados, apresentando uma acumulação de PHA por parte de algumas espécies de bactérias presentes. Ocorreu o aparecimento de microrganismos filamentosos com capacidade de acumulação de PHA em alguns ensaios, levando a serem testadas como culturas acumuladoras de PHA. A estabilidade das culturas mistas não foi atingida, mesmo havendo ensaios com 80 dias de operação. Efetuaram-se ensaios de acumulação de PHA em reatores descontínuos, utilizando as culturas selecionadas anteriormente em reatores SBR, com AOV provenientes da acidificação anaeróbia de diferentes resíduos (Fração Orgânica dos Resíduos Sólidos Urbanos - FORSU e Soro de Queijo). Verificou-se uma melhor acumulação por parte das culturas selecionadas com soro de queijo, na qual a quantidade de polímero acumulado triplicou.

Toxic metal recovery from spent hydroprocessing catalyst

Spent hydroprocessing catalysts (HPCs) are solid wastes generated in refinery industries and typically contain various hazardous metals, such as Co, Ni, and Mo. These wastes cannot be discharged into the environment due to strict regulations and require proper treatment to remove the hazardous substances. Various options have been proposed and developed for spent catalysts treatment; however, hydrometallurgical processes are considered efficient, cost-effective and environmentally-friendly methods of metal extraction, and have been widely employed for different metal uptake from aqueous leachates of secondary materials. Although there are a large number of studies on hazardous metal extraction from aqueous solutions of various spent catalysts, little information is available on Co, Ni, and Mo removal from spent NiMo hydroprocessing catalysts. In the current study, a solvent extraction process was applied to the spent HPC to specifically remove Co, Ni, and Mo. The spent HPC is dissolved in an acid solution and then the metals are extracted using three different extractants, two of which were aminebased and one which was a quaternary ammonium salt. The main aim of this study was to develop a hydrometallurgical method to remove, and ultimately be able to recover, Co, Ni, and Mo from the spent HPCs produced at the petrochemical plant in Come By Chance, Newfoundland and Labrador. The specific objectives of the study were: (1) characterization of the spent catalyst and the acidic leachate, (2) identifying the most efficient leaching agent to dissolve the metals from the spent catalyst; (3) development of a solvent extraction procedure using the amine-based extractants Alamine308, Alamine336 and the quaternary ammonium salt, Aliquat336 in toluene to remove Co, Ni, and Mo from the spent catalyst; (4) selection of the best reagent for Co, Ni, and Mo extraction based on the required contact time, required extractant concentration, as well as organic:aqueous ratio; and (5) evaluation of the extraction conditions and optimization of the metal extraction process using the Design Expert® software. For the present study, a Central Composite Design (CCD) method was applied as the main method to design the experiments, evaluate the effect of each parameter, provide a statistical model, and optimize the extraction process. Three parameters were considered as the most significant factors affecting the process efficiency: (i) extractant concentration, (ii) the organic:aqueous ratio, and (iii) contact time. Metal extraction efficiencies were calculated based on ICP analysis of the pre- and post–leachates, and the process optimization was conducted with the aid of the Design Expert® software. The obtained results showed that Alamine308 can be considered to be the most effective and suitable extractant for spent HPC examined in the study. Alamine308 is capable of removing all three metals to the maximum amounts. Aliquat336 was found to be not as effective, especially for Ni extraction; however, it is able to separate all of these metals within the first 10 min, unlike Alamine336, which required more than 35 min to do so. Based on the results of this study, a cost-effective and environmentally-friendly solventextraction process was achieved to remove Co, Ni, and Mo from the spent HPCs in a short amount of time and with the low extractant concentration required. This method can be tested and implemented for other hazardous metals from other secondary materials as well. Further investigation may be required; however, the results of this study can be a guide for future research on similar metal extraction processes.