The Discrimination of Colored Acrylic, Cotton, and Wool Textile Fibers Using Micro-Raman Spectroscopy. Part 1 : In Situ Detection and Characterization of Dyes

Raman spectroscopy has been applied to characterize fiber dyes and determine the discriminating ability of the method. Black, blue, and red acrylic, cotton, and wool samples were analyzed. Four excitation sources were used to obtain complementary responses in the case of fluorescent samples. Fibers that did not provide informative spectra using a given laser were usually detected using another wavelength. For any colored acrylic, the 633-nm laser did not provide Raman information. The 514-nm laser provided the highest discrimination for blue and black cotton, but half of the blue cottons produced noninformative spectra. The 830-nm laser exhibited the highest discrimination for red cotton. Both visible lasers provided the highest discrimination for black and blue wool, and NIR lasers produced remarkable separation for red and black wool. This study shows that the discriminating ability of Raman spectroscopy depends on the fiber type, color, and the laser wavelength.

Octopus Standard Automated Perimetry, Pulsar Perimetry, Moorfields Motion Displacement Test and Heidelberg Retinal Tomography in Glaucoma Detection - A Comparison of Diagnostic Accuracy

Purpose: To investigate the accuracy of 4 clinical instruments in the detection of glaucomatous damage. Methods: 102 eyes of 55 test subjects (Age mean = 66.5yrs, range = [39; 89]) underwent Heidelberg Retinal Tomography (HRTIII), (disc area<2.43); and standard automated perimetry (SAP) using Octopus (Dynamic); Pulsar (TOP); and Moorfields Motion Displacement Test (MDT) (ESTA strategy). Eyes were separated into three groups 1) Healthy (H): IOP<21mmHg and healthy discs (clinical examination), 39 subjects, 78 eyes; 2) Glaucoma suspect (GS): Suspicious discs (clinical examination), 12 subjects, 15 eyes; 3) Glaucoma (G): progressive structural or functional loss, 14 subjects, 20 eyes. Clinical diagnostic precision was examined using the cut-off associated with the p<5% normative limit of MD (Octopus/Pulsar), PTD (MDT) and MRA (HRT) analysis. The sensitivity, specificity and accuracy were calculated for each instrument. Results: See table Conclusions: Despite the advantage of defining glaucoma suspects using clinical optic disc examination, the HRT did not yield significantly higher accuracy than functional measures. HRT, MDT and Octopus SAP yielded higher accuracy than Pulsar perimetry, although results did not reach statistical significance. Further studies are required to investigate the structure-function correlations between these instruments.

The tectonically controlled emplacement of a vertically sheeted gabbro-pyroxenite intrusion: Feeder-zone of an ocean-island volcano (Fuerteventura, Canary Islands)

The Miocene PX1 gabbro-pyroxenite pluton, Fuerteventura, Canary Islands, is a 3.5 x 5.5 km shallow-level intrusion (0.15-0.2 GPa and 1100-1120 degrees C), interpreted as the feeder-zone to an ocean-island volcano. It displays a vertical magmatic banding expressed in five 50 to 100 metre-wide NNE-SSW trending alkaline gabbro sequences alternating with pyroxenites. This emplacement geometry was controlled by brittle to ductile shear zones, generated by a regional E-W extensional tectonic setting that affected Fuerteventura during the Miocene. At a smaller scale, the PX1 gabbro and pyroxenite bands consist of metre-thick differentiation units, which suggest emplacement by periodic injection of magma pulses as vertical dykes that amalgamated, similarly to a sub-volcanic sheeted dyke complex. Individual dykes underwent internal differentiation following a solidification front parallel to the dyke edges. This solidification front may have been favoured by a significant lateral/horizontal thermal gradient, expressed by the vertical banding in the gabbros, the fractionation asymmetry within individual dykes and the migmatisation of the wall rocks. Pyroxenitic layers result from the fractionation and accumulation of clinopyroxene +/- olivine +/- plagioclase crystals from a mildly alkaline basaltic liquid. They are interpreted as truncated differentiation sequences, from which residual melts were extracted at various stages of their chemical evolution by subsequent dyke intrusions, either next to or within the crystallising unit. Compaction and squeezing of the crystal mush is ascribed to the incoming and inflating magma pulses. The expelled interstitial liquid was likely collected and erupted along with the magma flowing through the newly injected dykes. Clinopyroxene mineral orientation - as evidenced by EBSD and micro X-ray tomography investigations - displays a marked pure-shear component, supporting the interpretation of the role of compaction in the generation of the pyroxenites. Conversely, gabbro sequences underwent minor melt extraction and are believed to represent crystallised coalesced magma batches emplaced at lower rates at the end of eruptive cycles. Clinopyroxene orientations in gabbros record a simple shear component suggesting syn-magmatic deformation parallel to observed NNE-SSW trending shear zones induced by the regional tensional stress field. This emplacement model implies a crystallisation time of 1 to 5 years for individual dykes, consistent with PX1 emplacement over less than 0.5 My. A minimum amount of approximately 150 km(3) of magma is needed to generate the pluton, part of it having been erupted through the Central Volcanic Centre of Fuerteventura. If the regional extensional tectonic regime controls the PX1 feeder-zone initiation and overall geometry, rates and volumes of magma depend on other, source-related factors. High injection rates are likely to induce intrusion growth rates larger than could be accommodated by the regional extension. In this case, dyke intrusion by propagation of a weak tip, combined with the inability of magma to circulate through previously emplaced and crystallised dykes could result in an increase of non-lithostatic pressure on previously emplaced mushy dyke walls; thus generating strong pure-shear compaction within the pluton feeder-zone and interstitial melt expulsion. These compaction-dominated processes are recorded by the cumulitic pyroxenite bands. (C) 2010 Elsevier B.V. All rights reserved.

The Importance of Graduates for the Scottish Economy: A “Micro-to-Macro” Approach

There have been numerous attempts to assess the overall impact of Higher Education Institutions on regional economies in the UK and elsewhere. There are two disparate approaches focussing on: demand-side effects of HEIs, exerted through universities’ expenditures within the local economy; HEIs’ contribution to the “knowledge economy”. However, neither approach seeks to measure the impact on regional economies that HEIs exert through the enhanced productivity of their graduates. We address this lacuna and explore the system-wide impact of the graduates on the regional economy. An extensive and sophisticated literature suggests that graduates enjoy a significant wage premium, often interpreted as reflecting their greater productivity relative to non-graduates. If this is so there is a clear and direct supply-side impact of HEI activities on regional economies through the employment of their graduates. However, there is some dispute over the extent to which the graduate wage premium reflects innate abilities rather than the impact of higher education per se. We use an HEI-disaggregated computable general equilibrium model of Scotland to estimate the impact of the growing proportion of graduates in the Scottish labour force that is implied by the current participation rate and demographic change, taking the graduate wage premium in Scotland as an indicator of productivity enhancement. We conduct a range of sensitivity analyses to assess the robustness of our results. While the detailed results do, of course, vary with alternative assumptions about future graduate retention rates and the size of the graduate wage premium, for example, they do suggest that the long-term supply-side impacts of HEIs provide a significant boost to regional GDP. Furthermore, the results suggest that the supply-side impacts of HEIs are likely to be more important than the expenditure impacts that are the focus of most “impact” studies.

The effects of agglomeration on wages: evidence from the micro-level

This paper estimates individual wage equations in order to test two rival non-nested theories of economic agglomeration, namely New Economic Geography (NEG), as represented by the NEG wage equation and urban economic (UE) theory , in which wages relate to employment density. The paper makes an original contribution by evidently being the first empirical paper to examine the issue of agglomeration processes associated with contemporary theory working with micro-level data, highlighting the role of gender and other individual-level characteristics. For male respondents, there is no significant evidence that wage levels are an outcome of the mechanisms suggested by NEG or UE theory, but this is not the case for female respondents. We speculate on the reasons for the gender difference.

The system-wide impacts of the external benefits to higher education on the Scottish economy: An exploratory “micro-to-macro” approach

The private market benefits of education, i.e. the wage premia of graduates, are widely studied at the micro level, although the magnitude of their macroeconomic impact is disputed. However, there are additional benefits of education, which are less well understood but could potentially drive significant macroeconomic impacts. Following the taxonomy of McMahon (2009) we identify four different types of benefits of education. These are: private market benefits (wage premia); private non market benefits (own health, happiness, etc.); external market benefits (productivity spillovers; and external non-market benefits (crime rates, civic society, democratisation, etc.). Drawing on available microeconometric evidence we use a micro-to-macro simulation approach (Hermannsson et al, 2010) to estimate the macroeconomic impacts of external benefits of higher education. We explore four cases: technology spillovers from HEIs; productivity spillovers from more skilled workers in the labour market; reduction in property crime; and the potential overall impact of external and private non-market benefits. Our results suggest that the external economic benefits of higher education could potentially be very large. However, given the dearth of microeconomic evidence this result should be seen as tentative. Our aim is to illustrate the links from education to the wider economy in principle and encourage further research in the field.

The Impact of Population Ageing on House Prices: A Micro-simulation Approach

This paper attempts to estimate the impact of population ageing on house prices. There is considerable debate about whether population ageing puts downwards or upwards pressure on house prices. The empirical approach differs from earlier studies of this relationship, which are mainly regression analyses of macro time-series data. A micro-simulation methodology is adopted that combines a macro-level house price model with a micro-level household formation model. The case study is Scotland, a country that is expected to age rapidly in the future. The parameters of the household formation model are estimated with panel data from the British Household Panel Survey covering the period 1999-2008. The estimates are then used to carry out a set of simulations. The simulations are based on a set of population projections that represent a considerable range in the rate of population ageing. The main finding from the simulations is that population ageing—or more generally changes in age structure—is not likely a main determinant of house prices, at least in Scotland.

II Workshop on the use of Computed Tomography (CT) in pig carcass classification. Other CT applications: live animals and meat technology, 16-17th April 2009, Monells (Girona), Spain

Es va realitzar el II Workshop en Tomografia Computeritzada (TC) a Monells. El primer dia es va dedicar íntegrament a la utilització del TC en temes de classificació de canals porcines, i el segon dia es va obrir a altres aplicacions del TC, ja sigui en animals vius o en diferents aspectes de qualitat de la carn o els productes carnis. Al workshop hi van assistir 45 persones de 12 països de la UE. The II workshop on the use of Computed Tomography (CT) in pig carcass classification. Other CT applications: live animals and meat technology was held in Monells. The first day it was dedicated to the use of CT in pig carcass classification. The segond day it was open to otehr CT applications, in live animals or in meat and meat products quality. There were 45 assistants of 12 EU countries.

Estimation of lean meat content in pig carcasses using X-ray Computed Tomography and PLS regression

Lean meat percentage (LMP) is an important carcass quality parameter. The aim of this work is to obtain a calibration equation for the Computed Tomography (CT) scans with the Partial Least Square Regression (PLS) technique in order to predict the LMP of the carcass and the different cuts and to study and compare two different methodologies of the selection of the variables (Variable Importance for Projection — VIP- and Stepwise) to be included in the prediction equation. The error of prediction with cross-validation (RMSEPCV) of the LMP obtained with PLS and selection based on VIP value was 0.82% and for stepwise selection it was 0.83%. The prediction of the LMP scanning only the ham had a RMSEPCV of 0.97% and if the ham and the loin were scanned the RMSEPCV was 0.90%. Results indicate that for CT data both VIP and stepwise selection are good methods. Moreover the scanning of only the ham allowed us to obtain a good prediction of the LMP of the whole carcass.

Postmortem computed tomography angiography, contrast medium administration and toxicological analyses in urine.

Postmortem angiography methods that use water soluble or lipid soluble liquid contrast compounds may potentially modify the composition of fluid-based biological samples and thus influence toxicological findings. In this study, we investigated whether toxicological investigations performed in urine collected prior to and post angiography using Angiofil? mixed with paraffin oil are characterized by different qualitative or quantitative results. In addition, we studied whether diluting samples with 1% and 3% contrast medium solution may modify molecule concentration. A postmortem angiography group consisting of 50 cases and a postmortem group without angiography consisting of 50 cases were formed. In the first group, toxicological investigations were performed in urine samples collected prior to and post angiography as well as in undiluted and diluted samples. In the second group, analyses were performed in undiluted and diluted urine, bile, gastric content, cerebrospinal and pericardial fluids collected during autopsy. The preliminary results indicate that differences may be observed between urine samples collected prior to and post angiography in the number of identified molecules in relation to specific cases. Analyses performed in diluted samples failed to reveal differences that might potentially alter the interpretation of toxicological results in all analyzed specimens for nearly all molecules, except for tetrahydrocannabinol and its metabolites. Though these findings suggest that toxicology might be effectively performed, in very special cases and for a large number of molecules, in biological samples collected after angiography, it remains recommendable to collect biological fluids for toxicology prior to contrast medium injection.

Focus sur l'échantillonnage de la poussière sédimentée avec des lingettes électrostatiques dans l'évaluation de l'exposition aux micro-organismes

L'exposition aux microorganismes en environnement intérieur a été associée à la survenue de troubles respiratoires et symptômes allergiques chez les personnes exposées (1). Investiguer la relation dose-réponse entre exposition et effets sur la santé est essentiel dans la prévention de l'apparition de ces symptômes. Cependant, la mesure de l'exposition par prélèvement actif des bioaérosols est coûteuse et contraignante à mettre en place sur un grand nombre de sites en parallèle. C'est pourquoi les méthodes de prélèvement passif de la poussière sédimentée sont de plus en plus souvent envisagées pour répondre à cette problématique. Pour valider l'efficacité d'évaluation de l'exposition par ces dernières méthodes, il est nécessaire de montrer que la poussière sédimentée est bien représentative de la poussière inhalable. Le premier article cité dans cette note se propose de répondre à ce point. De plus, il faut identifier les facteurs qui peuvent influencer les concentrations en micro-organismes dans ces poussières sédimentées. Le deuxième article choisi dans cette note répond à ce dernier aspect.