Diagnosis of Leishmania (Leishmania) chagasi infection in dogs and the relationship with environmental and sanitary aspects in the municipality of Palmas, state of Tocantins, Brazil

INTRODUCTION: The aim of the present study was to identify the presence of Leishmania (Leishmania) chagasi infection in dogs in the City of Palmas, Tocantins, Brazil, using the PCR technique to list the hot spots of infected dogs in the city and associate their occurrence to significant environmental changes at capture sites. METHODS: DNA was extracted from blood of dogs, and the PCR were performed with primers RV1/RV2. After screening the population studied, the regions of the city that had the highest occurrence of canine infection were detected. These sites were visited, and ecological parameters denoting anthropogenic disturbance were evaluated. RESULTS: Some important features were listed in the regions visited, such as low urbanization, lack of public collection of sewage, limited garbage collection, vacant lots with tall vegetation, decaying organic matter, and, most importantly, the occurrence of stray dogs and poultry in homes. CONCLUSIONS: The methodology for screening the population was very efficient, especially in evaluating a large number of individuals in a short time, with a high degree of automation. The results indicate an association between the observed parameters and the occurrence of infection in dogs. The model presented in the city is ideal for studies of disease progression and expansion and for the evaluation of control measures adopted for canine VL.

Human herpesvirus 8 (HHV-8) and the etiopathogenesis of Kaposi's sarcoma

OBJECTIVE: To review the current literature on human herpesvirus 8 with particular attention to the aspects related to the etiopathogenesis of Kaposi's sarcoma. MATERIALS AND METHODS: The authors searched original research and review articles on specific aspects of human herpesvirus 8 infection, including virology, epidemiology, transmission, diagnosis, natural history, therapy, and Kaposi's sarcoma etiopathogenesis. The relevant material was evaluated and reviewed. RESULTS: Human herpesvirus 8 is a recently discovered DNA virus that is present throughout the world but with major geographic variation. In the Western world, the virus, transmitted mainly by means of sexual contact, is strongly associated with Kaposi's sarcoma and body cavity-based lymphoma and more controversially with multiple myeloma and other non-proliferative disorders. There is no specific effective treatment, but HIV protease inhibitors may play an indirect role in the clearance of human herpesvirus 8 DNA from peripheral blood mononuclear cells of HIV-infected patients. Human herpesvirus 8 DNA is present in saliva, but there are as yet no documented cases of nosocomial transmission to health care workers. The prevalence of human herpesvirus 8 among health care workers is probably similar to that in the general population. CONCLUSION: Human herpesvirus 8 appears to be, at least in Western Europe and United States, restricted to a population at risk of developing Kaposi's sarcoma. Human herpesvirus 8 certainly has the means to overcome cellular control and immune responses and thus predispose carriers to malignancy, particularly Kaposi's sarcoma. The wide diffusion of Human herpesvirus 8 in classic Kaposi's sarcoma areas appears to represent an important factor in the high incidence of the disease. However, additional co-factors are likely to play a role in the development of Kaposi's sarcoma.

In Search of the Origins of Modernism: Venice and the Crisis of Classical Architecture in the mid-eighteenth century

This paper attempts to prove that in the years 1735 to 1755 Venice was the birthplace and cradle of Modern architectural theory, generating a major crisis in classical architecture traditionally based on the Vitruvian assumption that it imitates early wooden structures in stone or in marble. According to its rationalist critics such as the Venetian Observant Franciscan friar and architectural theorist Carlo Lodoli (1690-1761) and his nineteenth-century followers, classical architecture is singularly deceptive and not true to the nature of materials, in other words, dishonest and fallacious. This questioning did not emanate from practising architects, but from Lodoli himself– a philosopher and educator of the Venetian patriciate – who had not been trained as an architect. The roots of this crisis lay in a new approach to architecture stemming from the new rationalist philosophy of the Enlightenment age with its emphasis on reason and universal criticism.

Affordable prefabricated modular houses using cement and polymer based materials and advanced design tools

By taking advantage of the appropriate use of cement and polymer based materials and advanced computational tools, a pre-fabricated affordable house was built in a modular system. Modular system refers to the complete structure that is built-up by assembling pre-fabricated sandwich panels composed of steel fibre reinforced self-compacting concrete (SFRSCC) outer layers that are connected by innovative glass fibre reinforced polymer (GFRP) connectors, resulting in a panel with adequate structural, acoustic, and thermal insulation properties. The modular house was prepared for a typical family of six members, but its living area can be easily increased by assembling other pre-fabricated elements. The speed of construction and the cost of the constructive elements make these houses competitive when compared to traditional solutions. In this paper the relevant research subjacent to this project (LEGOUSE) is briefly described, as well as the construction process of the built real scale prototype.

Contribution to an efficient transmission of information to the textile fashion consumer and the influence in sustainable attitudes

The concepts involved in sustainable textile fashion, demanding good knowledge about raw materials, processes, end use properties and circuits amongst others, are able to determine the way the textile product is designed and the behavior of the consumer, regarding life style and buying decisions. The textile product`s life integrates raw materials, their processing, distribution, use by the consumer and destination of the product after useful lifetime, this is, his complete life cycle. It is very important to recognize the power of the consumer to influence parameters related to sustainability, namely when he decides how, when and why he buys and afterwards by the attitudes taken during and after use. The conscious act of consumption involves ethical, ecological and technical knowledge in which the concern is overall lifecycle of the fashion product and not exclusively aesthetic and symbolic values strongly related with its ephemeral nature. The present work proposes the classification of textile products by means of an innovative label aiming to establish a rating related to the Life of Fashion Products, by using parameters considered with especial impact in lifecycle, as textile fibers, processing conditions, generated wastes, commercialization circuits, durability and cleaning procedures. This label for sustainable fashion products aims to assist the stakeholders with informed attitudes and correct decisions in order to promote the objectives of sustainable fashion near designers, consumers and industrial experts.

Mejoramiento del comportamiento térmico de sistemas de calentamiento de agua solares termosifónicos hechos con materiales no convencionales y con tanques de almacenamiento verticales y horizontales Performance improvement of solar thermosyphonic systems for water heating made of non conventional materials and using horizontal and vertical storage tanks

El objeto de estudio de este proyecto son los sistemas de calentamiento de agua mediante energía solar que funcionan termosifónicamente. En particular se tratará con dos diseños particulares generados por fabricantes de la Provincia de Córdoba y que han solicitado el asesoramiento del Grupo de Energía Solar (GES) para el mejoramiento de la performance térmica de dichos equipos. Se trata de dos sistemas que tienen materiales no tradicionales y se diferencian además por tener una distinta disposición del tanque de almacenamiento: uno es en forma vertical y el otro en forma horizontal. Basados en los resultados de un ensayo bajo norma internacional, donde se detectaron algunas puntos factibles de mejora, se propone en este proyecto el análisis en detalle de los equipos, para lo cual se les debe desarmar completos, para realizar un estudio analítico y experimental de los mismos con el objeto de hacer un planteo teórico-analítico del comportamiento de los mismos, con la implementación de propuestas de mejora y chequeo de los resultados. Se propone entonces como objetivo lograr un mejoramiento de la performance térmica de los citados equipos a partir de un estudio experimental y analítico. Asumiendo esta posibilidad de mejora, se plantea la hipótesis de que es posible representar el funcionamiento de estos equipos mediante modelos físico-matemáticos desarrollados a partir de ecuaciones y correlaciones conocidas y procesos a interpretar mediante resoluciones numéricas y softwares específicos de simulación. De esta manera, se plantea el despieze completo de los equipos para estudiar en detalle su estructura y conexiones internas y a partir de la geometría, dimensiones y propiedades termofísicas de materiales constructivos y fluidos de trabajo, realizar modelos físico-matemáticos que permitan realizar variaciones de propiedades y geometría y así buscar las mejores combinaciones que produzcan equipos más eficientes térmicamente. Los modelos físico-matemáticos serán codificados en lenguajes de alto nivel para poder luego de una validación de los modelos, correr simulaciones en un software de reconocimiento internacional que permite sumar dichos modelos mediante un protocolo de comunicación, haciendo que las poderosas prestaciones del software se puedan aplicar a nuestros modelos. Se complementará el estudio con un análisis exergético para identificar los puntos críticos en que se producen las pérdidas de oportunidad de aprovechar la energía disponible, para así analizar cómo solucionar los problemas en dichos puntos. Los materiales a utilizar serán los propios equipos provistos por los fabricantes, que serán modificados convenientemente para operarlos como prototipos Se espera obtener un conocimiento acabado de los procesos y principios de funcionamiento de los equipos, que permita plantear las mejoras, las cuales se implementarán en los prototipos, realizándose una medición mediante norma igual a la inicial para ver en que magnitud se logran las mejoras esperadas. Se pretende además que las mejoras a implementar, en la etapa de transferencia a las empresas involucradas, redunden no sólo en un beneficio técnico, sino que también los sea desde el punto de vista económico. Para ello se trabajará también sobre los procesos y métodos de fabricación para que los equipos mejorados no sean mas caros que los originales y de ser posible sean aún más económicos, todo esto apuntando a la difusión de la energía solar térmica y poner al alcance de todos estos equipos tan convenientes para la propagación de las energías limpias. El proyecto redundará también en un importante beneficio para el conocimiento de la comunidad científica en general, con el aporte de nuevos resultados en diseños novedosos y con nuevos materiales. Además, la institución se beneficiará con la formación que obtendrán los integrantes del proyecto, muchos de ellos en etapa de realización de sus estudios de posgrado y en una etapa importante de su vida como investigadores. The main goal of this project is the improvement of two thermosyphonic solar water heating systems, made of non conventional materials and with different arrangement of their storage tanks: one is vertical and the other one horizontal. The thermosyphonic systems are provided by manufacturers of the Córdoba Province, who came to the Solar Energy Group (GES) of the National University of Río Cuarto looking for help for the design of their products. In an agreement with these manufacturers, it was proposed this project in order to work analytically and experimentally in order to obtain physical-mathematical models of these two systems, which allow for changes to look by means of simulations the best changes to implement on the equipments for the improvement of their thermal performance. Then, the materials to be used are the proper systems provided by the manufacturers, which will be disarmed to be studied in detail. After the analytical study the proposals of improvement will be implemented in a high level language of programming to perform simulations in the environment of a well-known software for energy simulations (TRNSYS). After the simulations, the best modifications will be physically implemented in the prototypes to perform finally the same normalized test of the beginning and check the magnitude of the implemented improvements. The importance of this project is based on the offer of better systems the companies would make, which would benefit the deployment of the thermal solar energy. Another relevant point is to make the new equipments at the same cost of the previous ones or cheaper, in order to achieve a good deployment of the solar water heating systems; then, the manufacture processes and methods must be studied to obtain not only good technical solutions, but also economical equipments. In addition, this project will contribute to the increasing of the knowledge in the area of thermosyphonic solar systems and the training of postgraduate students.

Degradación de efluentes de las industrias del cuero y textil mediante procesos fotocatalíticos heterogéneos empleando la luz solar. Degradation of effluents from the leather and textile industries through heterogeneous photocatalytic processes using sunlight.

El creciente desarrollo de la industria del cuero y textil en nuestro país, y específicamente en la provincia de Córdoba, ha hecho resurgir en los ultimos años una problemática aún no resuelta que es la elevada contaminación de los recursos hídricos. En ambas industrias, la operación de teñido involucra principalmente colorantes de tipo azoico los cuales son "no biodegradables" y se fragmentan liberando aminas aromáticas cancerígenas. Para abordar esta problemática, la fotocatálisis heterogénea aparece como una nueva tecnología que permitiría la completa mineralización de estos colorantes. A través de radiación y un fotocatalizador sólido adecuado se pueden generan radicales libres eficientes para la oxidación de materia orgánica (colorantes) en medio acuoso. En este sentido, se proponen tamices moleculares mesoporosos modificados con metales de transición (MT) como fotocatalizadores potencialmente aptos para la degradación de estos contaminantes. El propósito principal de este proyecto es el diseño, síntesis, caracterización y evaluación de materiales mesoporosos que presenten actividad fotocatalítica ya sea mediante la modificación de su estructura con diversos metales fotosensibles y/o empleándolos como soporte de óxido de titanio. Se pretende evaluar estos materiales en la degradación de colorantes intentando desplazar su fotosensibilidad hacia la radiación visible para desarrollar nuevas tecnologías con menor impacto ambiental y mayor aprovechamiento de la energía solar. Para ello se sintetizarán materiales del tipo MCM-41 modificados con distintos MT tales como Fe, Cr, Co, Ni y Zn mediante incorporación directa del ión metálico o impregnación. Al mismo tiempo, tanto estos últimos materiales como el MCM-41 silíceo serán empleados como soporte de TiO2. Sus propiedades fisicoquímicas se caracterizarán mediante distintas técnicas instrumentales y su actividad fotocatalítica se evaluará en la degradación de colorantes azoicos bajo radiación visible. Se seleccionará el catalizador más eficiente y se estudiarán los diversos factores que afectan el proceso de fotodegradación. Así mismo, el análisis de la concentración del colorante y los productos presentes en el medio en función del tiempo de reacción permitirá inferir sobre la cinética de la decoloración y postular posibles mecanismos de fotodegradación. Con esta propuesta se espera contribuír al desarrollo de un sector industrial importante en nuestra provincia como es el de las industrias del cuero y textil, mediante la generación de nuevas tecnologías que empleen la energía solar para la degradación de sus efluentes (colorantes). En este sentido, se espera desarrollar nuevos materiales optimizados para lograr la mayor eficiencia fotocatalítica. Esto conduciría entonces hacia la remediación de un problema ambiental de alto impacto tanto para nuestra provincia y nuestro país como para la población mundial, como es la contaminación de los recursos hídricos. Finalmente, con este proyecto se contribuirá a la formación de dos doctorandos y un maestrando, cuyos temas de tesis están vinculados con nuestro objeto de estudio. The increasing development of the textile and leather industries in our country, and specifically in Córdoba, has revived an unresolved problem that is the high contamination of water resources. In both industries, the dyeing involves mainly type azoic dyes which are not biodegradable and break releasing carcinogenic aromatic amines. Heterogeneous photocatalysis appears as a new technology that would allow the complete mineralization of these pollutants. Through radiation and a suitable solid it is possible to generate free radicals for efficient oxidation of organic matter (dyes) in aqueous medium. In this respect, mesoporous molecular sieves modified with transition metals are proposed as potential photocatalysts. The main purpose of this project is the synthesis of mesoporous materials having photocatalytic activity for the degradation of dyes. We will try to move their photosensitivity to visible radiation to develop new technologies with lower environmental impact and greater use of solar energy. Materials MCM-41 modified with metals (Fe, Cr, Co, Ni and Zn) will be synthesized by direct incorporation or impregnation. These materials and the siliceous MCM-41 will be then employed as support of TiO2. The materials will be evaluated in the photocatalytic degradation of azoic dyes under visible radiation. The influence of different factors on the photodegradation proccess will be studied. Kinetic studies will be carried out and a possible reaction way will be proposed. Thus, this work will contribute to the advancement of an important industrial sector and the remediation of an environmental problem with high impact for our province and our country. Moreover, this proyect will contribute to the development of two doctoral tesis and one magister tesis which are vinculated with our study subject.

The study of insect blood-feeding behaviour: 2. Recording techniques and the use of flow charts

This paper continues a discussion of approaches and methodologies we have used in our studies of feeding in haematophagous insects. Described are techniques for directly monitoring behaviour: electrical recording of feeding behaviour via resistance changes in the food canal, optical methods for monitoring mouthpart activity, and a computer technique for behavioural event recording. Also described is the use of "flow charts" or "decision diagrams" to model interrelated sequences of behaviours.

The role of Pten in the Hematopoietic System and the Hematopoietic Stem Cells

Résumé Identification, localisation et activation des cellules souches hématopoiétiques dormantes in vivo Les cellules souches somatiques sont présentes dans la majorité des tissus régénératifs comme la peau, l'épithélium intestinal et le système hématopoiétique. A partir d'une seule cellule, elles ont les capacités de produire d'autres cellules souches du même type (auto-renouvellement) et d'engendrer un ensemble défini de cellules progénitrices différenciées qui vont maintenir ou réparer leur tissu hôte. Les cellules souches adultes les mieux caractérisées sont les cellules souches hématopoiétiques (HSC), localisées dans la moelle osseuse. Un des buts de mon travail de doctorat était de caractériser plus en profondeur la localisation des HSCs endogènes in vivo. Pour ce faire, la technique "label retaining assay", se basant sur la division peu fréquentes et sur la dormance des cellules souches, a été utilisée. Après un marquage des souris avec du BrdU (analogue à l'ADN) suivi d'une longue période sans BrdU, les cellules ayant incorporés le marquage ("label retaining cells" LCRs) ont pu être identifiées dans la moelle osseuse. Ces cellules LCRs étaient enrichies 300 fois en cellules de phenotype HSC et, en utilisant de la cytofluorométrie, il a pu être montré qu'environ 15% de toutes les HSCs d'une souris restent dormantes durant plusieures semaines. Ces HSCs dormantes à long terme ne sont probablement pas impliquées dans la maintenance de 'hématopoièse. Par contre, on assiste à l'activation rapide de ces HSCs dormantes lors d'une blessure, comme une ablation myéloide. Elles re-entrent alors en cycle cellulaire et sont essentielles pour une génération rapide des cellules progénitrices et matures qui vont remplacer les cellules perdues. De plus, la détection des LCRs, combinée avec l'utilisation du marqueur de HSCs c-kit, peut être utilisée pour la localisation des HSCs dormantes présentes dans la paroi endostéale de la cavité osseuse. De manière surprenante, les LCRs c-kit+ ont surtout étés trouvées isolées en cellule unique, suggérant que le micro-environement spécifique entourant et maintenant les HSCs, appelé niche, pourrait être très réduit et abriter une seule HSC par niche. Rôles complexes du gène supresseur de tumeur Pten dans le système hématopoiétique La phosphatase PTEN disparaît dans certains cancers héréditaires ou sporadiques humains, comme les gliomes, les cancers de l'utérus ou du sein. Pten inhibe la voie de signalisation de la PI3-kinase et joue un rôle clé dans l'apoptose, la croissance, la prolifération et la migration cellulaire. Notre but était d'étudier le rôle de Pten dans les HSC normale et durant la formation de leucémies. Pour ce faire, nous avons généré un modèle murin dans lequel le gène Pten peut être supprimé dans les cellules hématopoiétiques, incluant les HSCs. Ceci a été possible en croissant l'allèle conditionnelle ptenflox soit avec le transgène MxCre inductible par l'interféron α soit avec le transgène Scl-CreERt inductible par le tamoxifen. Ceci permet la conversion de l'allèle ptenflox en l'allèle nul PtenΔ dans les HSCs et les autres types cellulaires hématopoiétiques. Les souris mutantes Pten développent une splénomégalie massive causée par une expansion dramatiques de toutes les cellules myéloides. De manière interessante, alors que le nombre de HSCs dans la moelle osseuse diminue progressivement, le nombre des HSCs dans la rate augmente de manière proportionnelle. Etrangement, les analyses de cycle cellulaire ont montrés que Pten n'avait que peu ou pas d'effet sur la dormance des HSCs ou sur leur autorenouvellement. En revanche, une augmentation massive du niveau de la cytokine de mobilisation G-CSF a été détéctée dans le serum sanguin, suggérant que la suppression de Pten stimulerait la mobilisation et la migration des HSC de la moelle osseuse vers la rate. Finallement, la transplantation de moelle osseuse délétée en Pten dans des souris immuno-déficientes montre que Pten fonctionnerait comme un suppresseur de tumeur dans le système hématopoiétique car son absence entraîne la formation rapide de leucémies lymphocytaires. Summary Identification, localization and activation of dormant hematopoietic stun cells in vivo Somatic stem cells are present in most self-renewing tissues including the skin, the intestinal epithelium and the hematopoietic system. On a single cell basis they have the capacity to produce more stem cells of the same phenotype (self-renewal) and to give rise to a defined set of mature differentiated progeny, responsible for the maintenance or repair of the host tissue. The best characterized adult stem cell is the hematopoietic stem cell (HSC) located in the bone marrow. One goal of my thesis work was to further characterize the location of endogenous HSCs in vivo. To do this, a technique called "label retaining assay» was used which takes advantage of the fact that stem cells (including HSCs) divide very infrequently and can be dormant for months. After labeling mice with the DNA analogue BrdU followed by a long BrdU free "chase", BrdU "label retaining cells" (CRCs) could be identified in the bone marrow. These CRCs were 300-fold enriched for phenotypic HSCs and by using flow cytometry analysis it could be shown that about 15% of all HSCs in the mouse are dormant for many weeks. Our results suggest that these long-term dormant HSCs are unlikely to be involved in homeostatic maintenance. However they are rapidly activated and reenter the cell cycle in response to injury signals such as myeloid ablation. In addition, detection of LRCs in combination with the HSC marker c-Kit could be used to locate engrafted dormant HSCs close to the endosteal lining of the bone marrow cavities. Most surprisingly, c-Kit+LRCs were found predominantly as single cells suggesting that the specific stem cell maintaining microenvironment, called niche, has limited space and may house only single HSCs. Complex roles of the tumor suppressor gene Pten in the hematopoietic system. The phosphatase PTEN is lost in hereditary and sporadic forms of human cancers, including gliomas, endometrial and breast cancers. Pten inhibits the PI3-kina.se pathway and plays a key role in apoptosis, cell growth, proliferation and migration. Our aim was to study the role of Pten in normal HSCs and during leukemia formation. To do this, we generated a mouse model in which the Pten gene can be deleted in hematopoietic cells including HSCs. This was achieved by crossing the conditional ptenflox allele with either the interferona inducible MxCre or the tamoxifen inducible Scl-CreERT transgene. This allowed the conversion of the ptenflox allele into a pterr' null allele in HSCs and other hematopoietic cell types. As a result Pten mutant mice developed massive splenomegaly due to a dramatic expansion of all myeloid cells. Interestingly, while the number of bone marrow HSCs progressively decreased, the number of HSCs in the spleen increased to a similar extent. Unexpectedly, extensive cell cycle analysis showed that Pten had little or no effect on HSC dormancy or HSC self-renewal. Instead, dramatically increased levels of the mobilizing cytokine G-CSF were detected in the blood serum suggesting that loss-of Pten stimulates mobilization and migration of HSC from the BM to the spleen. Finally, transplantation of Pten deficient BM cells into immuno-compromised mice showed that Pten can function as a tumor suppressor in the hematopoietic system and that its absence leads to the rapid formation of T cell leukemia.

The Hindu Model of Social Organization and the bhakti Movement : the Example of Vallabha's sampradāya

(Résumé de l'ouvrage) This volume addresses research topics within the field of Bhakti literature, the devotional poetry and other compositions of devotional character in the earlier literature of the modern South Asian languages. Its papers range from the roots of the Bhakti tradition in the early history of Krsna to its modern adaptations in nineteenth- and twentieth-century culture. Geographically, they span Bengal to Sind, Panjab to Maharashtra. Contemporary study of the modern Indian languages has broadened the scope of scholarship to consider today's Hindu attitudes, and those of a mixed society, against the background of ancient culture. Here, materials in six modern Asian languages are discussed: Bengali, Gujarati, Hindi in its main literary forms, Marathi, Panjabi and Sindhi; with assessment also of material in Sanskrit, Arabic and Chinese. In addition to studies of literary (and orally transmitted) works in the Krsna or Rama traditions, and of Sufi compositions and their interpretation, there are papers on the early history of sacred sites, the emergence of the religion of Rama, later religious formulations throughout the subcontinent, and the interaction of the Islamic and the Hindu.

Metabolic syndrome and the risk of breast cancer in postmenopausal women.

BACKGROUND: Only a few small studies investigated the association between postmenopausal breast cancer and metabolic syndrome (MetS) as a single entity. Materials and methods: We analyzed the data of two Italian and Swiss case-control studies conducted between 1983 and 2007, including 3869 postmenopausal women with incident breast cancer and 4082 postmenopausal controls admitted to the same hospitals as cases for acute conditions. MetS was defined as the presence of at least three components among diabetes, drug-treated hypertension, drug-treated hyperlipidemia, and obesity. RESULTS: The odds ratios (ORs) of postmenopausal breast cancer were 1.33 [95% confidence interval (CI) 1.09-1.62] for diabetes, 1.19 (95% CI 1.07-1.33) for hypertension, 1.08 (95% CI 0.95-1.22) for hyperlipidemia, 1.26 (95% CI 1.11-1.44) for body mass index ≥30 kg/m(2), and 1.22 (95% CI 1.09-1.36) for waist circumference ≥88 cm. The risk of postmenopausal breast cancer was significantly increased for women with MetS (OR = 1.75, 95% CI 1.37-2.22, for three or more MetS components, P for trend for increasing number of components < 0.0001) and the risk was higher at older age (OR = 3.04, 95% CI 1.75-5.29, at age ≥70 years for three or more MetS components). CONCLUSIONS: This study supports a direct association between MetS and postmenopausal breast cancer risk.

S�_�_olta - Final Report on the Development and Implementation of the S�_�_olta Quality Assurance Programme

This report provides an overview of the development and field testing of the S�_olta Quality Assurance Programme (QAP). It outlines the timeline, key roles and activities and draws upon evaluation data gathered at various stages of the action research and development process. It briefly describes the processes, tools, materials and the professional roles that have been developed to support implementation of the S�_olta QAP. It concludes with consideration of the context within which the S�_olta QAP will operate into the future and makes a set of recommendations to connect this research and development phase for S�_olta and the S�_olta QAP with national and international policy developments related to the improvement of the quality of early childhood care and education (ecce) in Ireland.

Surgery for Hirschsprung's disease: comparison between the Duhamel method and the transanal endorectal pull-through based on 59 patients and a review of the literature

Background:¦Hirschsprung's disease (HSCR) is a congenital malformation of the enteric nervous system due to the¦arrest of migration of neural crest cells to form the myenteric and submucosal plexuses. It leads to an anganglionic intestinal segment, which is permanently contracted causing intestinal obstruction. Its incidence is approximately 1/5000 birth, and males are more frequently affected with a male/female ratio of 4/1. The diagnosis is in most cases made within the first year of life. The rectal biopsy of the mucosa and sub-mucosa is the diagnostic gold standard.¦Purpose:¦The aim of this study was to compare two surgical approaches for HSCR, the Duhamel technique and the transanal endorectal pull-through (TEPT) in term of indications, duration of surgery, duration of hospital stay, postoperative treatment, complications, frequency of enterocolitis and functional outcomes.¦Methods:¦Fifty-nine patients were treated for HSCR by one of the two methods in our department of pediatric¦surgery between 1994 and 2010. These patients were separated into two groups (I: Duhamel, II: TEPT), which were compared on the basis of medical records. Statistics were made to compare the two groups (ANOVA test). The first group includes 43 patients and the second 16 patients. It is noteworthy that twenty-four patients (about 41% of all¦patients) were referred from abroad (Western Africa). Continence was evaluated with the Krickenbeck's score.¦Results:¦Statistically, this study showed that operation duration, hospital stay, postoperative fasting and duration of postoperative antibiotics were significantly shorter (p value < 0.05) in group II (TEPT). But age at operation and length of aganglionic segment showed no significant difference between the two groups. The continence follow-up showed generally good results (Krickenbeck's scores 1; 2.1; 3.1) in both groups with a slight tendency to constipation in group I and soiling in group II.¦Conclusion:¦We found two indications for the Duhamel method that are being referred from a country without¦careful postoperative surveillance and/or having a previous colostomy. Even if the Duhamel technique tends to be replaced by the TEPT, it remains the best operative approach for some selected patients. TEPT has also proved some advantages but must be followed carefully because, among other points, of the postoperative dilatations. Our postoperative standards, like digital rectal examination and anal dilatations seem to reduce the occurrence of complications like rectal spur and anal/anastomosis stenosis, respectively in the Duhamel method and the TEPT technique.

Techniques for the detection of pathogenic Cryptococcus species in wood decay substrata and the evaluation of viability in stored samples

In this study, we evaluated several techniques for the detection of the yeast form of Cryptococcus in decaying wood and measured the viability of these fungi in environmental samples stored in the laboratory. Samples were collected from a tree known to be positive for Cryptococcus and were each inoculated on 10 Niger seed agar (NSA) plates. The conventional technique (CT) yielded a greater number of positive samples and indicated a higher fungal density [in colony forming units per gram of wood (CFU.g-1)] compared to the humid swab technique (ST). However, the difference in positive and false negative results between the CT-ST was not significant. The threshold of detection for the CT was 0.05.10³ CFU.g-1, while the threshold for the ST was greater than 0.1.10³ CFU-1. No colonies were recovered using the dry swab technique. We also determined the viability of Cryptococcus in wood samples stored for 45 days at 25ºC using the CT and ST and found that samples not only continued to yield a positive response, but also exhibited an increase in CFU.g-1, suggesting that Cryptococcus is able to grow in stored environmental samples. The ST.1, in which samples collected with swabs were immediately plated on NSA medium, was more efficient and less laborious than either the CT or ST and required approximately 10 min to perform; however, additional studies are needed to validate this technique.