Cost-effective and lightweight mobile units for MixAR: A comparative trial among different setups

Cultural heritage has arousing the interest of the general public (e.g. tourists), resulting in the increasing number of visitations to archaeological sites. However, many buildings and monuments are severely damaged or completely destroyed, which doesn’t allow to get a full experience of “travelling in time”. Over the years, several Augmented Reality (AR) approaches were proposed to overcome these issues by providing three-dimensional visualization of reconstructed ancient structures in situ. However, most of these systems were made available through heavy and expensive technological bundles. Alternatively, MixAR intends to be a lightweight and cost-effective Mixed Reality system which aims to provide the visualization of virtual ancient buildings reconstructions in situ, properly superimposed and aligned with real-world ruins. This paper proposes and compares different AR mobile units setups to be used in the MixAR system, with low-cost and lightweight requirements in mind, providing different levels of immersion. It was propounded four different mobile units, based on: a laptop computer, a single-board computer (SBC), a tablet and a smartphone, which underwent a set of tests to evaluate their performances. The results show that mobile units based on laptop computer and SBC reached a good overall performance while mobile units based on tablet and smartphone did not meet such a satisfactory result even though they are acceptable for the intended use.

MixAR mobile prototype: visualizing virtually reconstructed ancient structures in situ

Archeology and related areas have a special interest on cultural heritage sites since they provide valuable information about past civilizations. However, the ancient buildings present in these sites are commonly found in an advanced state of degradation which difficult the professional/expert analysis. Virtual reconstructions of such buildings aim to provide a digital insight of how these historical places could have been in ancient times. Moreover, the visualization of such models has been explored by some Augmented Reality (AR) systems capable of providing support to experts. Their compelling and appealing environments have also been applied to promote the social and cultural participation of general public. The existing AR solutions regarding this thematic rarely explore the potential of realism, due to the following lacks: the exploration of mixed environments is usually only supported for indoors or outdoors, not both in the same system; the adaptation of the illumination conditions to the reconstructed structures is rarely addressed causing a decrease of credibility. MixAR [1] is a system concerned with those challenges, aiming to provide the visualization of virtual buildings augmented upon real ruins, allowing soft transitions among its interiors and exteriors and using relighting techniques for a faithful interior illumination, while the user freely moves in a given cultural heritage site, carrying a mobile unit. Regarding the focus of this paper, we intend to report the current state of MixAR mobile unit prototype, which allows visualizing virtual buildings – properly aligned with real-world structures – based on user's location, during outdoor navigation. In order to evaluate the prototype performance, a set of tests were made using virtual models with different complexities.

Identifying finger postures when interacting with the touch screen of mobile devices

This study presents the results of preliminary test on the interaction between fingertip and touch screen. The objective of this study is to identify the fingertip posture when interacting with touch screen devices. Ten participants, 7 males and 3 females, participated in this study. The participants were asked to touch targets on the mobile devices screen by tapping them sequentially and connecting them. The participants performed the tasks in a sitting posture. A tablet with 10 inches screen and a mobile phone with 4 inches screen were used in the study. The results showed that all participants dominantly used their thumb to interact with the mobile phone in single and two hands postures. The common thumb posture adopted by the participants is the combination of the 60° pitch and 0° roll angles. While for interaction with tablet in various postures observed in the study, the participants commonly used their index fingers in the combination of 60° pitch and 0° roll angles. This study also observed the participant with long finger nails touched targets on the mobile devices screen by using her index or middle fingers very low pitch.

Improving quality of medical service with mobile health software

An increasing number of m-Health applications are being developed benefiting health service delivery. In this paper, a new methodology based on the principle of calm computing applied to diagnostic and therapeutic procedure reporting is proposed. A mobile application was designed for the physicians of one of the Portuguese major hospitals, which takes advantage of a multi-agent interoperability platform, the Agency for the Integration, Diffusion and Archive (AIDA). This application allows the visualization of inpatients and outpatients medical reports in a quicker and safer manner, in addition to offer a remote access to information. This project shows the advantages in the use of mobile software in a medical environment but the first step is always to build or use an interoperability platform, flexible, adaptable and pervasive. The platform offers a comprehensive set of services that restricts the development of mobile software almost exclusively to the mobile user interface design. The technology was tested and assessed in a real context by intensivists.

Recensão de Lee, E. (2005). How internet radio can change the world : an activist’s handbook. Nova Iorque : iUniverse, Inc.

(Excerto) O entusiasmo pela comunicação digital percorre transversalmente a obra How Internet Radio Can Change the World: An Activist’s Handbook, de Eric Lee. Esta postura tão apologista das possibilidades comunicativas oferecidas pela Internet reforça provavelmente um conjunto alargado de entendimentos sobre a conquista do quotidiano pelo digital. Em 1967, McLuhan e Fiore já se referiam aos circuitos eletrónicos como ‘extensões do sistema nervoso central’. Numa leitura mais contemporânea, José Bragança de Miranda refere: “vivemos, nos nossos dias, no meio de conexões, de links, do on‑line, estamos votados à participação, à ‘interactividade’, etc. Algo de novo está a emergir” (2001, p. 265). Maria Teresa Cruz (2001) define a convergência tecnológica das relações sociais como a ‘mobilização erótica da técnica’. Esta obra aqui recenseada pretende, assim, desafiar a utilização da rádio digital para “melhorar a comunicação e solidificar as organizações” (p. 1), em torno de três grupos de reflexão.

Portuguese internet radio from 2006 to 2009: technical readiness and openness to interaction

[Extrat] The advent of thc internet raised questions about the role of radio in a fast-changing media environment. Many voices forecast its end but in the summer of 2008 the Swedish Radio and TV Authority published a study named 'The Future of Radio', which clearly opposed the pessimism of recent analysis. While the study anticipates the exhaustion of the FM model, it clearly broadens perspectives for DAB and internet radio, highlighting digitalization as the key element for the future relevance of radio. The Portuguese researcher and radio professional João Paulo Meneses states that 'the future of radio relies upon the internet', calling the broad service offerings of the net the pathway for the survival of radio from the threats to its two essential aspects: rnobility and accumulation (Meneses 2008). Accumulation is radio's capability to be used in a non­exclusive manner, which means that a listener can use the radio while performing other activities, like cooking, sewing, reading, writing or jogging.

Comedy shows: humour, crisis and the resilience of radio

Being a part of many radio stations' progra

Quantifying, generating and mitigating radio interference in Low-Power Wireless Networks

Doctoral Programme in Telecommunication - MAP-tele

Flexible thin-film lithium battery

Tese de Doutoramento Programa Doutoral em Engenharia Electrónica e Computadores.

“Learning through Radio, Learning for Life!”: Notas sobre o desenvolvimento de uma rádio participativa online

(Excerto) Olhando para o percurso do RadioActive, há uma ideia que parece ser transversal a todo o projeto. Referimo-nos a um princípio que chamaríamos de “identificação” e que foi determinante – é determinante – nos processos de investigação participativa. Falamos da identificação dos investigadores com os princípios da investigação-ação, da identificação das intervenções com as particularidades de cada contexto. Da imprescindível e progressiva identificação dos participantes com o projeto. Na verdade, sem esta multifacetada identificação é impossível pensar em resultados sustentáveis e persistentes. Investigadores e demais participantes têm de sentir que o projeto é “seu”, que os objetivos são “seus”, embora o façam necessariamente a velocidades diferentes. A aprendizagem, neste âmbito, expande-se sempre de dentro para fora, emerge dos interesses do sujeito e não de uma estrutura pré-concebida e imposta pelos que chegam (Ravenscroft et al., 2011), neste caso, os investigadores. Uma das diferenças das pesquisas participativas em relação às tradicionais é, precisamente, a atuação coletiva e não solitária do investigador. Os pesquisadores fazem parte de um processo participatório em que estão envolvidos numa estrutura (Cammarota & Fine, 2008: 5). Paulo Freire é o autor primordial em todos os projetos e países onde a RA101 foi aplicada. As suas concepções em torno da investigação-ação participativa tentam apontar sempre para uma ação e também para uma reflexão sobre os processos.

Simultaneous detection of cyclopiazonic acid and aflatoxin B1 by HPLC in methanol/water mobile phase

A simple procedure for the simultaneous detection of cyclopiazonic acid (CPA) and aflatoxin B1 from fungal extracts is presented, using a methanol and water mobile phase and fluorescence detection. This methodology has been tested with standard solutions of both mycotoxins CPA and Aflatoxin B1 and with methanolic extracts of Aspergillus section Flavi strains, previously characterized for their mycotoxin production profile. Previously available methodology required the use of two different chromatographic runs for these mycotoxins, with distinct columns and detectors (fluorescence detection with a post-column photochemical derivatization (PHRED) for aflatoxin B1 and UV detection for CPA). The proposed method detects both mycotoxins in a single run. Data from these assays will be presented and discussed.

Final report detailed description - NET Station: shaping radio for web environment

In more scientific terms, NET Station contributed to: - discuss in theoretical terms the role radio still play in contemporary societies; - examine how audiences are using sound resources on the Web; - draw up a new theoretical framework for the study of the reconfiguration of radio language on the Internet;acknowledge that people are not abandoning radio as a medium; the survey applied by the team demonstrated that there is a complementariness between traditional radio and radio on the Internet; - understand that people expect more interactivity, more opportunities to participate in content production and more diversity of contents. These results were shared with editors responsible for Portuguese radio and might influence the offer made available by these radio corporations from now on; - demonstrate that the Internet is underexplored in terms of sound and acoustic communication; - promote the production of new sound narratives to be available on the Internet;

Análisis y optimización del radio enlace en un sistema RFID

El proyecto tiene como principal objetivo lograr mejorar el enlace entre el tag y el Reader, en un sistema RFID (Radio Frecuency IDentification). El mismo será abordado desde dos ópticas de trabajo; La primera, es lograr el mismo alcance de los sistemas actuales, reduciendo la potencia aportada por el Reader. En esta situación su principal aplicación será en los implantes en seres vivos, disminuyendo la radiación electromagnética en los mismos. La segunda, es lograr aumentar la distancia del alcance del enlace, sin aumentar la potencia del Reader.

Dispositivo de transmisión de datos por radio frecuencia

El proyecto comprende el diseño, implementación, medición y evaluación de un dispositivo de comunicaciones digitales inalámbrica. Este dispositivo podrá ser utilizado como soporte de distintas aplicaciones, como automatización de viviendas, automatización de edificios inteligentes, control y seguimiento de vehículos, control y monitoreo de animales, instrumental médico y otras. La construcción de un transmisor y un receptor de datos por radiofrecuencia, en un único circuito integrado, plantea distintas etapas y para concretarlas se trazaron los siguientes objetivos: • Diseño, implementación y medición de circuitos de transmisión de datos con integrados existentes. • Estudio de las tecnologías y software disponibles para el diseño de los circuitos que constituyen el proyecto. Diseño, simulación, implementación y medición de circuitos realizados con dispositivos discretos.

Redes de datos inalámbricas y dispositivos de transmisión de datos por radio frecuencia

El presente proyecto comprende el diseño, simulación, construcción y puesta en funcionamiento de una red inalámbrica. La plataforma de comunicaciones desarrollada en un proyecto anterior se complementa ahora con la implementación de una red inalámbrica, lo cual va a permitir que los módulos de comunicaciones- tres o más -puedan interactuar entre sí. La realización del proyecto surge de la necesidad de contar con una red inalámbrica que permita cubrir grandes distancias y transmitir a una central los datos de los sensores. La principal característica de cada módulo de comunicaciones es que trabajan como repetidores de las demás, permitiendo comunicar a todos y tener bajo consumo. La implementación de una red inalámbrica mencionada en el párrafo anterior está comprometida como parte del Proyecto PAV2003-0076. En dicho proyecto, el equipo va a continuar con la investigación en circuitos y dispositivos de Alta Frecuencia, para ser aplicados en sistemas de telecomunicaciones.