Estudos exploratórios sobre propriedades térmicas do compósito cimento-polpa celulósica(CPC)

The search for a more aware use of available raw materials has led to a need to create more sustainable products. The use of natural fibers to reinforce cement, for instance, has been widely studied in the past decades because of the possibility that they can improve material properties such as thermal resistance and to compression, besides conferring a decrease in their total weight. This present study aimed at to conduct preliminary studies on the thermal resistance of the composite cement - Cellulose Pulp, using waste from the pulp and paper industry. Through experiments, it was found that the composite manufactured using the ratio 30 % Portland cement and 70 % pulp, showed satisfactory results regarding its thermal resistance, so it could be considered as a potential thermal insulation material, for use in constructions

Relaxação Lagrangiana Aplicada ao Problema de Dimensionamento de Lotes em Máquinas Paralelas: Limitantes Inferiores

This paper addresses the single stage lot-sizing problem in parallel machines. Each item can be produced on any machine, and incurs a setup time before to start the production. The objective of this paper is to obtain lower bounds of good quality for this problem. A solution method is developed based on a reformulation of the problem and the Lagrangian relaxation of a set of constraints. Some computational results are presented comparing the proposed method with a method from the literature and with a computational package.

Mobilização do solo na semeadura do milho: emissão de CO2 e desempenho de máquinas agrícolas

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Uso de redes neurais com adaptação de pesos por modos deslizantes para controle de sistemas e aplicações em máquinas elétricas

Pós-graduação em Engenharia Elétrica - FEIS

Limitações humanas do operador de máquinas agrícolas e o ambiente socio-laboral na sojicultura

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

O perfil do aluno de cursos técnicos ou Parem as máquinas: o aluno envelheceu

The enrollments in technical courses outgrew beyond 70% between 2002 and 2010. It has made fundamental to look after this educational segment because of the changes in the job market, associated with the promulgation of the Law #11.741, witch disentails the High Scholl from the Professional Education, points out to some better understanding of this population. This study intended to trace the profile of this student. The socioeconomic criteria by Abipeme (Brazilian Association of Market Research Institutes) was used, and the most important item was age, with a result higher than expected to this educational phase, about 24 years old. The respondents characterized themselves as pertaining to B and C economical classes.

Máquinas de somar estocásticas e conjuntos de Julia

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Treinamento básico sobre operação e segurança operacional de máquinas agrícolas

The study is intended to portray the experiment of mechanical engineering course academicians’ that work on health and labor security field, at the project “Primary Training of Operation and Operational Security of Agricultural Machines”, by practical and theoretical content for workers of a rural community, aiming operational security orientation on their work activities.

Avaliação do desempenho das máquinas agrícolas na implantação da cultura do girassol

The sunflower oleaginous is the fourth of recognized importance in the oil production and few studies related to agricultural operations adopted for this crop. The objective of the present work was to study the performance of agricultural machines in the conventional tillage and reduced in the plantation of the sunflower crop. The experiment was installed at the Experimental Farm of Lageado, belonging to the Faculty of Agricultural Sciences of UNESP, located in Botucatu-SP. It consisted of two types of tillage (conventional tillage-CC and reduced tillage-CR), with experimental design in randomized blocks and four replications. The treatment CC promoted less coverage of the soil surface protected with waste when compared to CR treatment. The chisel plow was the tillage of equipment that required the tractor higher average traction force, average power traction and slippage, consequently, promoted lower average speed of work. The theoretical field capacity and area of land involved in the treatment CR were superior when compared to treatment CC, thereby lower consumption of fuel per hour worked was lower in CR treatment.

Demanda energética de máquinas agrícolas na implantação da cultura do sorgo forrageiro

Forage sorghum can be grown in areas and environmental conditions dry and warm, where the productivity of other forage plants can often be uneconomical. The soil disturbance can be made only on the lines of planting (direct seeding) or entirely from the area for seeding (conventional tillage), as plowing, harrowing, subsoiling and chiseling (minimum tillage). The displacement speed ideal for planting is one in which the groove is opened and closed without removing the over-ground, allowing the distribution of seed spacing and depth constant. The experiment was conducted in a soil classified as Typic Oxisol at Lageado Experimental Farm, Faculty of Agronomic Sciences, UNESP, Botucatu campus. This study aimed to evaluate the response of sorghum in four forward speeds (3, 5, 6 and 9 km h-1) and four systems of soil management: SD (direct seeding), GP (harrow + sowing), LPG (disc harrow and two light disking + sowing) and CR (scarification and seeding). Data was subjected to analysis of variance in a factorial 4 x 4 and a randomized block design with split plots. The following parameters were determined: average speed, average strength of the drawbar, the average power drawbar, theoretical field capacity of the tractor-equipment, fuel consumption per hour. For the conditions under which the experiment was conducted, it was concluded that the hourly fuel consumption was not influenced by tillage systems and was inversely proportional to the increase of speed work, and that the change of speed in the sowing operation did not provide additional the values of average traction force on the bar of the tractor-planter.

Propriedades de pasta e térmicas de misturas instantâneas de farinha de soja, fécula e farelo de mandioca

The application of extrusion technology in the food industry has enabled the development of new commercial products of fast preparation, and maintaining the nutritional characteristics after the process. During this process there are changes in raw material due to the action of temperature, humidity and mechanical friction resulting in a modified product which can be used in various industrial applications. This work aimed to evaluate the effect of the composition of the raw material and operating conditions of the extrusion process on the properties of paste and thermal properties in the development of a functional instant flour of cassava and soybean. The results showed significant effects of all operating parameters on the rheological properties studied. The extruded flours showed no residual gelatinization enthalpy, suggesting that the starch in the samples was gelatinized. The experimental conditions of the smallest percentages of cassava residue (10%) and high soybean flour (25%) mixed with cassava starch, extrusion temperature of 75ºC and low screw speed (170rpm) leads to obtain instant flour with desirable characteristics.

Estimativa da irradiação solar global pelo método de Angstrom-Prescott e técnicas de aprendizado de máquinas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Melhoria de eficiência de máquinas pela metodologia DMAIC em eventos Kaizen

In a highly competitive and globally integrated market, excellence in production processes has become a survival factor, instead of just a differential point. In this context, companies from various sectors have resorted to philosophies and techniques already established in the literature to improve the efficiency of their production processes. This paper discusses aspects and techniques used to improve the production efficiency of a multinational company that manufactures surgical devices to a global market. Through DMAIC methodology, there were found opportunities to improve machines' efficiency by OEE, an efficiency indicator, in Kaizen Events. A case study was conducted to analyze the methodology and to identify good practices and difficulties along the way