A Panel Data Investigation of Real Exchange Rate Misalignment and Growth

The paper investigates the role of real exchange rate misalignment on long-run growth for a set of ninety countries using time series data from 1980 to 2004. We first estimate a panel data model (using fixed and random effects) for the real exchange rate, with different model specifications, in order to produce estimates of the equilibrium real exchange rate and this is then used to construct measures of real exchange rate misalignment. We also provide an alternative set of estimates of real exchange rate misalignment using panel cointegration methods. The variables used in our real exchange rate models are: real per capita GDP; net foreign assets; terms of trade and government consumption. The results for the two-step System GMM panel growth models indicate that the coefficients for real exchange rate misalignment are positive for different model specification and samples, which means that a more depreciated (appreciated) real exchange rate helps (harms) long-run growth. The estimated coefficients are higher for developing and emerging countries.

A collaborative approach for incorporating forensic case data into crime investigation using criminal intelligence analysis and visualisation

There is an increasing awareness that the articulation of forensic science and criminal investigation is critical to the resolution of crimes. However, models and methods to support an effective collaboration between these partners are still poorly expressed or even lacking. Three propositions are borrowed from crime intelligence methods in order to bridge this gap: (a) the general intelligence process, (b) the analyses of investigative problems along principal perspectives: entities and their relationships, time and space, quantitative aspects and (c) visualisation methods as a mode of expression of a problem in these dimensions. Indeed, in a collaborative framework, different kinds of visualisations integrating forensic case data can play a central role for supporting decisions. Among them, link-charts are scrutinised for their abilities to structure and ease the analysis of a case by describing how relevant entities are connected. However, designing an informative chart that does not bias the reasoning process is not straightforward. Using visualisation as a catalyser for a collaborative approach integrating forensic data thus calls for better specifications.

Clinical presentation and time-course of postoperative venous thromboembolism: Results from the RIETE Registry

There is little literature about the clinical presentation and time-course of postoperative venous thromboembolism (VTE) in different surgical procedures. RIETE is an ongoing, prospective registry of consecutive patients with objectively confirmed, symptomatic acute VTE. In this analysis, we analysed the baseline characteristics, thromboprophylaxis and therapeutic patterns, time-course, and three-month outcome of all patients with postoperative VTE. As of January 2006, there were 1,602 patients with postoperative VTE in RIETE: 393 (25%) after major orthopaedic surgery (145 elective hip arthroplasty, 126 knee arthroplasty, 122 hip fracture); 207 (13%) after cancer surgery; 1,002 (63%) after other procedures. The percentage of patients presenting with clinically overt pulmonary embolism (PE) (48%, 48%, and 50% respectively), the average time elapsed from surgery to VTE (22 +/- 16, 24 +/- 16, and 21 +/- 15 days, respectively), and the three-month incidence of fatal PE (1.3%, 1.4%, and 0.8%, respectively), fatal bleeding (0.8%, 1.0%, and 0.2%, respectively), or major bleeding (2.3%, 2.9%, and 2.8%, respectively) were similar in the three groups. However, the percentage of patients who had received thromboprophylaxis (96%, 76% and 52%, respectively), the duration of prophylaxis (17 +/- 9.6, 13 +/- 8.9, and 12 +/- 11 days, respectively) and the mean daily doses of low-molecular-weight heparin (4,252 +/- 1,016, 3,260 +/- 1,141, and 3,769 +/- 1,650 IU, respectively), were significantly lower in those undergoing cancer surgery or other procedures. In conclusion, the clinical presentation, time-course, and three-month outcome of VTE was similar among the different subgroups of patients, but the use of prophylaxis in patients undergoing cancer surgery or other procedures was suboptimal.

Compositional Data Analysis with R

R from http://www.r-project.org/ is ‘GNU S’ – a language and environment for statistical computingand graphics. The environment in which many classical and modern statistical techniques havebeen implemented, but many are supplied as packages. There are 8 standard packages and many moreare available through the cran family of Internet sites http://cran.r-project.org .We started to develop a library of functions in R to support the analysis of mixtures and our goal isa MixeR package for compositional data analysis that provides support foroperations on compositions: perturbation and power multiplication, subcomposition with or withoutresiduals, centering of the data, computing Aitchison’s, Euclidean, Bhattacharyya distances,compositional Kullback-Leibler divergence etc.graphical presentation of compositions in ternary diagrams and tetrahedrons with additional features:barycenter, geometric mean of the data set, the percentiles lines, marking and coloring ofsubsets of the data set, theirs geometric means, notation of individual data in the set . . .dealing with zeros and missing values in compositional data sets with R procedures for simpleand multiplicative replacement strategy,the time series analysis of compositional data.We’ll present the current status of MixeR development and illustrate its use on selected data sets

Measurement and explanation of socioeconomic inequality in health with longitudinal data

This paper presents a method for the measurement of changes in health inequality and income-related health inequality over time in a population.For pure health inequality (as measured by the Gini coefficient) andincome-related health inequality (as measured by the concentration index),we show how measures derived from longitudinal data can be related tocross section Gini and concentration indices that have been typicallyreported in the literature to date, along with measures of health mobilityinspired by the literature on income mobility. We also show how thesemeasures of mobility can be usefully decomposed into the contributions ofdifferent covariates. We apply these methods to investigate the degree ofincome-related mobility in the GHQ measure of psychological well-being inthe first nine waves of the British Household Panel Survey (BHPS). Thisreveals that dynamics increase the absolute value of the concentrationindex of GHQ on income by 10%.

Changes in the use of broad-spectrum antibiotics after withdrawal of cefepime from the market: an interrupted time series analysis

Background and objective: Cefepime was one of the most used broad-spectrum antibiotics in Swiss public acute care hospitals. The drug was withdrawn from market in January 2007, and then replaced by a generic since October 2007. The goal of the study was to evaluate changes in the use of broad-spectrum antibiotics after the withdrawal of the cefepime original product. Design: A generalized regression-based interrupted time series model incorporating autocorrelated errors assessed how much the withdrawal changed the monthly use of other broad-spectrum antibiotics (ceftazidime, imipenem/cilastin, meropenem, piperacillin/ tazobactam) in defined daily doses (DDD)/100 bed-days from January 2004 to December 2008 [1, 2]. Setting: 10 Swiss public acute care hospitals (7 with\200 beds, 3 with 200-500 beds). Nine hospitals (group A) had a shortage of cefepime and 1 hospital had no shortage thanks to importation of cefepime from abroad. Main outcome measures: Underlying trend of use before the withdrawal, and changes in the level and in the trend of use after the withdrawal. Results: Before the withdrawal, the average estimated underlying trend (coefficient b1) for cefepime was decreasing by -0.047 (95% CI -0.086, -0.009) DDD/100 bed-days per month and was significant in three hospitals (group A, P\0.01). Cefepime withdrawal was associated with a significant increase in level of use (b2) of piperacillin/tazobactam and imipenem/cilastin in, respectively, one and five hospitals from group A. After the withdrawal, the average estimated trend (b3) was greatest for piperacillin/tazobactam (+0.043 DDD/100 bed-days per month; 95% CI -0.001, 0.089) and was significant in four hospitals from group A (P\0.05). The hospital without drug shortage showed no significant change in the trend and the level of use. The hypothesis of seasonality was rejected in all hospitals. Conclusions: The decreased use of cefepime already observed before its withdrawal from the market could be explained by pre-existing difficulty in drug supply. The withdrawal of cefepime resulted in change in level for piperacillin/tazobactam and imipenem/cilastin. Moreover, an increase in trend was found for piperacillin/tazobactam thereafter. As these changes generally occur at the price of lower bacterial susceptibility, a manufacturers' commitment to avoid shortages in the supply of their products would be important. As perspectives, we will measure the impact of the changes in cost and sensitivity rates of these antibiotics.

Why Italy and not Spain?: comparing two industrialization processes from a dissagregate time-series perspective

This study presents new evidence concerning the uneven processes of industrialization innineteenth century Spain and Italy based on a disaggregate analysis of the productivesectors from which the behaviour of the aggregate indices is comprised. The use of multivariate time-series analysis techniques can aid our understanding and characterization of these two processes of industrialization. The identification of those sectors with key rolesin leading industrial growth provides new evidence concerning the factors that governed thebehaviour of the aggregates in the two economies. In addition, the analysis of the existenceof interindustry linkages reveals the scale of the industrialization process, and wheresignificant differences exist, accounts for many of the divergences recorded in the historiography for the period 1850-1913.

Why Italy and not Spain?: comparing two industrialization processes from a dissagregate time-series perspective

This study presents new evidence concerning the uneven processes of industrialization innineteenth century Spain and Italy based on a disaggregate analysis of the productivesectors from which the behaviour of the aggregate indices is comprised. The use of multivariate time-series analysis techniques can aid our understanding and characterization of these two processes of industrialization. The identification of those sectors with key rolesin leading industrial growth provides new evidence concerning the factors that governed thebehaviour of the aggregates in the two economies. In addition, the analysis of the existenceof interindustry linkages reveals the scale of the industrialization process, and wheresignificant differences exist, accounts for many of the divergences recorded in the historiography for the period 1850-1913.

Analysis and spatial modeling of the indoor radon Swiss data

The present research deals with an important public health threat, which is the pollution created by radon gas accumulation inside dwellings. The spatial modeling of indoor radon in Switzerland is particularly complex and challenging because of many influencing factors that should be taken into account. Indoor radon data analysis must be addressed from both a statistical and a spatial point of view. As a multivariate process, it was important at first to define the influence of each factor. In particular, it was important to define the influence of geology as being closely associated to indoor radon. This association was indeed observed for the Swiss data but not probed to be the sole determinant for the spatial modeling. The statistical analysis of data, both at univariate and multivariate level, was followed by an exploratory spatial analysis. Many tools proposed in the literature were tested and adapted, including fractality, declustering and moving windows methods. The use of Quan-tité Morisita Index (QMI) as a procedure to evaluate data clustering in function of the radon level was proposed. The existing methods of declustering were revised and applied in an attempt to approach the global histogram parameters. The exploratory phase comes along with the definition of multiple scales of interest for indoor radon mapping in Switzerland. The analysis was done with a top-to-down resolution approach, from regional to local lev¬els in order to find the appropriate scales for modeling. In this sense, data partition was optimized in order to cope with stationary conditions of geostatistical models. Common methods of spatial modeling such as Κ Nearest Neighbors (KNN), variography and General Regression Neural Networks (GRNN) were proposed as exploratory tools. In the following section, different spatial interpolation methods were applied for a par-ticular dataset. A bottom to top method complexity approach was adopted and the results were analyzed together in order to find common definitions of continuity and neighborhood parameters. Additionally, a data filter based on cross-validation was tested with the purpose of reducing noise at local scale (the CVMF). At the end of the chapter, a series of test for data consistency and methods robustness were performed. This lead to conclude about the importance of data splitting and the limitation of generalization methods for reproducing statistical distributions. The last section was dedicated to modeling methods with probabilistic interpretations. Data transformation and simulations thus allowed the use of multigaussian models and helped take the indoor radon pollution data uncertainty into consideration. The catego-rization transform was presented as a solution for extreme values modeling through clas-sification. Simulation scenarios were proposed, including an alternative proposal for the reproduction of the global histogram based on the sampling domain. The sequential Gaussian simulation (SGS) was presented as the method giving the most complete information, while classification performed in a more robust way. An error measure was defined in relation to the decision function for data classification hardening. Within the classification methods, probabilistic neural networks (PNN) show to be better adapted for modeling of high threshold categorization and for automation. Support vector machines (SVM) on the contrary performed well under balanced category conditions. In general, it was concluded that a particular prediction or estimation method is not better under all conditions of scale and neighborhood definitions. Simulations should be the basis, while other methods can provide complementary information to accomplish an efficient indoor radon decision making.

Changes in the use of broad-spectrum antibiotics after cefepime shortage: a time series analysis.

The original cefepime product was withdrawn from the Swiss market in January 2007, and replaced by a generic 10 months later. The goals of the study were to assess the impact of this cefepime shortage on the use and costs of alternative broad-spectrum antibiotics, on antibiotic policy, and on resistance of Pseudomonas aeruginosa towards carbapenems, ceftazidime and piperacillin-tazobactam. A generalized regression-based interrupted time series model assessed how much the shortage changed the monthly use and costs of cefepime and of selected alternative broad-spectrum antibiotics (ceftazidime, imipenem-cilastatin, meropenem, piperacillin-tazobactam) in 15 Swiss acute care hospitals from January 2005 to December 2008. Resistance of P. aeruginosa was compared before and after the cefepime shortage. There was a statistically significant increase in the consumption of piperacillin-tazobactam in hospitals with definitive interruption of cefepime supply, and of meropenem in hospitals with transient interruption of cefepime supply. Consumption of each alternative antibiotic tended to increase during the cefepime shortage and to decrease when the cefepime generic was released. These shifts were associated with significantly higher overall costs. There was no significant change in hospitals with uninterrupted cefepime supply. The alternative antibiotics for which an increase in consumption showed the strongest association with a progression of resistance were the carbapenems. The use of alternative antibiotics after cefepime withdrawal was associated with a significant increase in piperacillin-tazobactam and meropenem use and in overall costs, and with a decrease in susceptibility of P. aeruginosa in hospitals. This warrants caution with regard to shortages and withdrawals of antibiotics.

Should Koos grade I vestibular schwannomas be treated early with gamma knife surgery? A subgroup analysis in a series of 190 consecutive patients.

INTRODUCTION: Gamma knife surgery (GKS) for vestibular schwannomas (VS) has a long-term clinical and scientific track record. After a period of de-escalation of dose prescription, results show a high rate of tumor control with improvement of clinical outcome (less than 1% facial palsy, 50-70% hearing preservation). Régis et al. (J Neurosurg 2013;119 Suppl.:105-11) suggested recently that proactive GKS management in intracanalicular tumors is better than a « wait and see » strategy when hearing is still useful at the time of diagnosis. MATERIALS AND METHODS: Based on these previous findings, we prospectively analyzed 190 vestibular schwannomas (VS), treated with GKS as first intention over a period of 4 years (2010-2014). We concentrated on patient, tumor and dosimetric characteristics. Special attention was given on the dose to the cochlea and its impact in maintaining serviceable hearing. RESULTS: The mean follow-up period was 1.3years (range 0.6-3.6). Preoperative serviceable hearing was present in 63.11% patients. The mean maximal diameter was 15.1mm (range 5-29.5). The size and volume of the tumor corresponded to Koos grade I, II, III and IV in 15.9%, 34.8%, 45.4% and 3.8% of the cases, respectively. The mean target volume was 1.24cm(3) (0.017-7.8). The mean prescription isodose volume was 1.6 cc (0.032-8.5). The mean marginal dose was 12Gy (11-12). The mean maximal dose received by the cochlea in patients with GR class 1 and 2 was 4.1Gy (1.5-7.6). Our preliminary neuroradiological follow-up shows 97% tumor control, with 45% shrinkage. Patients presenting with GR class 1 and class 2 at baseline retained serviceable hearing in 85% of cases. Among the patients with a follow-up of at least one year, those with Koos I tumors had the highest probability to maintain identical level of hearing after GKS. CONCLUSION: Our preliminary data suggest that Koos I patients should be treated early with GKS, before tumor growth and/or hearing deterioration, as they have the highest probability of hearing preservation.

Predicting soil erosion using Rusle and NDVI time series from TM Landsat 5

The objective of this work was to evaluate the seasonal variation of soil cover and rainfall erosivity, and their influences on the revised universal soil loss equation (Rusle), in order to estimate watershed soil losses in a temporal scale. Twenty-two TM Landsat 5 images from 1986 to 2009 were used to estimate soil use and management factor (C factor). A corresponding rainfall erosivity factor (R factor) was considered for each image, and the other factors were obtained using the standard Rusle method. Estimated soil losses were grouped into classes and ranged from 0.13 Mg ha-1 on May 24, 2009 (dry season) to 62.0 Mg ha-1 on March 11, 2007 (rainy season). In these dates, maximum losses in the watershed were 2.2 and 781.5 Mg ha-1 , respectively. Mean annual soil loss in the watershed was 109.5 Mg ha-1 , but the central area, with a loss of nearly 300.0 Mg ha-1 , was characterized as a site of high water-erosion risk. The use of C factor obtained from remote sensing data, associated to corresponding R factor, was fundamental to evaluate the soil erosion estimated by the Rusle in different seasons, unlike of other studies which keep these factors constant throughout time.

Data collection and criticality analysis for cost effective maintenance during the life cycle of a flue gas line

Työn tarkoituksena oli kerätä käyttövarmuustietoa savukaasulinjasta kahdelta suomalaiselta sellutehtaalta niiden käyttöönotosta aina tähän päivään asti. Käyttövarmuustieto koostuu luotettavuustiedoista sekä kunnossapitotiedoista. Kerätyn tiedon avulla on mahdollista kuvata tarkasti laitoksen käyttövarmuutta seuraavilla tunnusluvuilla: suunnittelemattomien häiriöiden lukumäärä ja korjausajat, laitteiden seisokkiaika, vikojen todennäköisyys ja korjaavan kunnossapidon kustannukset suhteessa savukaasulinjan korjaavan kunnossapidon kokonaiskustannuksiin. Käyttövarmuustiedon keräysmetodi on esitelty. Savukaasulinjan kriittisten laitteiden määrittelyyn käytetty metodi on yhdistelmä kyselytutkimuksesta ja muunnellusta vian vaikutus- ja kriittisyysanalyysistä. Laitteiden valitsemiskriteerit lopulliseen kriittisyysanalyysiin päätettiin käyttövarmuustietojen sekä kyselytutkimuksen perusteella. Kriittisten laitteiden määrittämisen tarkoitus on löytää savukaasulinjasta ne laitteet, joiden odottamaton vikaantuminen aiheuttaa vakavimmat seuraukset savukaasulinjan luotettavuuteen, tuotantoon, turvallisuuteen, päästöihin ja kustannuksiin. Tiedon avulla rajoitetut kunnossapidon resurssit voidaan suunnata oikein. Kriittisten laitteiden määrittämisen tuloksena todetaan, että kolme kriittisintä laitetta savukaasulinjassa ovat molemmille sellutehtaille yhteisesti: savukaasupuhaltimet, laahakuljettimet sekä ketjukuljettimet. Käyttövarmuustieto osoittaa, että laitteiden luotettavuus on tehdaskohtaista, mutta periaatteessa samat päälinjat voidaan nähdä suunnittelemattomien vikojen todennäköisyyttä esittävissä kuvissa. Kustannukset, jotka esitetään laitteen suunnittelemattomien kunnossapitokustannusten suhteena savukaasulinjan kokonaiskustannuksiin, noudattelevat hyvin pitkälle luotettavuuskäyrää, joka on laskettu laitteen seisokkiajan suhteena käyttötunteihin. Käyttövarmuustiedon keräys yhdistettynä kriittisten laitteiden määrittämiseen mahdollistavat ennakoivan kunnossapidon oikean kohdistamisen ja ajoittamisen laitteiston elinaikana siten, että luotettavuus- ja kustannustehokkuusvaatimukset saavutetaan.

Railway Wagon Market Analysis and New Multi-Purpose Wagon Solution for Freight Transports - Finnish Manufacturing Perspective

Rautateillä käytettävät tavaravaunut ovat vanhenemassa hyvin nopeasti; tämä koskee niin Venäjää, Suomea, Ruotsia kuin laajemminkin Eurooppaa. Venäjällä ja Euroopassa on käytössä runsaasti vaunuja, jotka ovat jo ylittäneet niille suositeltavan käyttöiän. Silti niitä käytetään kuljetuksissa, kun näitä korvaavia uusia vaunuja ei ole tarpeeksi saatavilla. Uusimmat vaunut ovat yleensä vaunuja vuokraavien yritysten tai uusien rautatieoperaattorien hankkimia - tämä koskee erityisesti Venäjää, jossa vaunuvuokraus on noussut erittäin suosituksi vaihtoehdoksi. Ennusteissa kerrotaan vaunupulan kasvavan ainakin vuoteen 2010 saakka. Jos rautateiden suosio rahtikuljetusmuotona kasvaa, niin voimistuva vaunukysyntä jatkuu huomattavan paljon pidemmän aikaa. Euroopan ja Venäjän vaunukannan tilanne näkyy myös sitä palvelevan konepajateollisuuden ongelmina - yleisesti ottaen alan eurooppalaiset yritykset ovat heikosti kannattavia ja niiden liikevaihto ei juuri kasva, venäläiset ja ukrainalaiset yritykset ovat olleet samassa tilanteessa, joskin aivan viime vuosina tilanne on osassa kääntynyt paremmaksi. Kun näiden maanosien yritysten liikevaihtoa, voittoa ja omistaja-arvoa verrataan yhdysvaltalaisiin kilpailijoihin, huomataan että jälkimmäisten suoriutuminen on huomattavan paljon parempaa, ja näillä yrityksillä on myös kyky maksaa osinkoja omistajilleen. Tutkimuksen tarkoituksena oli kehittää uuden tyyppinen kuljetusvaunu Suomen, Venäjän sekä mahdollisesti myös Kiinan väliseen liikenteeseen. Vaunutyypin tarkoituksena olisi kyetä toimimaan monikäyttöisenä, niin raaka-aineiden kuin konttienkin kuljetuksessa, tasapainottaen kuljetusmuotojen aiheuttamaa kuljetuspaino-ongelmaa. Kehitystyön pohjana käytimme yli 1000 venäläisen vaunutyypin tietokantaa, josta valitsimme Data Envelopment Analysis -menetelmällä soveliaimmat vaunut kontinkuljetukseen (lähemmin tarkastelimme n. 40 vaunutyyppiä), jättäen mahdollisimman vähän tyhjää tilaa junaan, mutta silti kyeten kantamaan valitun konttilastin. Kun kantokykyongelmia venäläisissä vaunuissa ei useinkaan ole, on vertailu tehtävissä tavarajunan pituuden ja kokonaispainon perusteella. Simuloituamme yhdistettyihin kuljetuksiin soveliasta vaunutyyppiä käytännössä löytyvässä kuljetusverkostossa (esim. raakapuuta Suomeen tai Kiinaan ja kontteja takaisin Venäjän suuntaan), huomasimme lyhemmän vaunupituuden sisältävän kustannusetua, erityisesti raakaainekuljetuksissa, mutta myös rajanylityspaikkojen mahdollisesti vähentyessä. Lyhempi vaunutyyppi on myös joustavampi erilaisten konttipituuksien suhteen (40 jalan kontin käyttö on yleistynyt viime vuosina). Työn lopuksi ehdotamme uuden vaunutyypin tuotantotavaksi verkostomaista lähestymistapaa, jossa osa vaunusta tehtäisiin Suomessa ja osa Venäjällä ja/tai Ukrainassa. Vaunutyypin tulisi olla rekisteröity Venäjälle, sillä silloin sitä voi käyttää Suomen ja Venäjän, kuten myös soveltuvin osin Venäjän ja Kiinan välisessä liikenteessä.